Cannot find the new pms colors Pantone + solid coated

I have a Pantone + Solid coated book that has 336 new colors in the back. Specifically pms 2028 C. The problem is when I try to find it in the PMS charts in Illi CS6 or PS CS6, those 336 new colors are not in my Pantone + Solid coated charts. I ran the adobe updates and it updated what it needed but I'm still unable to find it. Am I looking in the wrong chart? The name matches that of my PMS book so it just doesn't make sense. I scroll through the Illi chart and also try to use the "find" section. Any help is greatly appriciated. thanks Kyle

PMS 2028 (and the list you describe) are not in the current Pantone lists in Illustrator CC (or earlier AI versions).
But you can make a spot color of your own choosing, and call it whatever you want (such as Pantone 2028). You may need to fake or guess on the actual color (in RGB or CMYK), but if you're separating for an actual (non-digital) printing press, your faked color won't make any difference, as the proper ink formulation for your spot color is what actually goes on the paper when it is printed.
If you're not separating for a traditional printing press, then what is the point of needing a specific Pantone color? Other than being used for ink formulations on a (non-digital) printing press, Pantone is an old, useless model, attempting to extend its relevance beyond the pull-date by forming software alliances with such as Adobe, etc.
For non-traditional printing, rather, develop the colors you want according to your specific output device, be it a photo printer, CMYK digital press, etc. -- If you really "like" PMS 2028, then develop that color (probably in RGB/HSB) for your specific output device.
Lastly, if you are printing to an actual printing press, and also need the 2028 color in your pre-press (digital) proofs, then you will need to develop it for your proofer (your specific non-press output device), probably with the caveat to your client that it is a color "approximation." Then use any spot color (titled, "Pantone 2028") for separations, as the actual ink will provde accurate color.

Similar Messages

Cannot find the new binding

Hi !!
I am using jdeveloper 11.1.1.5!!
I had dragged and dropped mu OpcLoseId [an LOV] from my OpportHd table in a af:form.
I had passed this value as a parameter to my AMImpl Method. So that while my user clicks the button this method get executed.
My Scenario:
While my user clicks the button i am getting an error in my Log as given below
<FacesBindingRewiringListener> <afterPhase> ADFv: cannot find the new binding with name data.com_rits_suplr_view_CrmAppIndexPageDef.pageTemplateBinding.r0.PageFragments_MKG1020PageDef_WEB_INF_TaskFlows_MKG1020TF_xml_MKG1020TF._lovTree_OphdCloseId.Could any one pls help to solve this issue?

I just encountered this, and what I think is happening here is that the list binding is not able to resolve the user's choice to a valid value in the LOV.
I see this when using an [af:inputListOfValues|http://http://docs.oracle.com/cd/E16764_01/apirefs.1111/e12419/tagdoc/af_inputListOfValues.html] and the user types in something that is not available through the list data source.
I know this thread is old, but shows up in google when searched for this error message and I thought I'd update it with what I thought.
-Jeevan

I cannot find the new data in the database

Hi
I'm newbie at SQL.
I read and watched a lot about the SQL. But still can't figure out the problem.
THE PROBLEM:
we are using accounting software for our business.
the software keeping records of clients names and other information.
when I open the software, i can access everything, but i can't edit the File Number for example.
So I tried to access the files from within windows. Then I learned that the files I'm looking for are called Database.Which brought me to SQL server.
short story: I opened the database using SQL server but it contains only data that are three years old.
How i can find the new data. Right now the database seems to have only 97K records.

well, what i did is open SQL server, selected the database, then scroled to the Clients Table then opened it.
I can only see the ID and Name, other information is always NULL
I scrolled down to the last one which has ID 97000 for example.
Then I went back to the Application, from there i can see the other information about every client, and i can see that this client file was created like three years ago
I started to think that the application is using a different database
even though I searched for any MDF file or a file that was recently edited, I can't find anything else

I cannot find the new thread button to ask a question

I just installed Firefox and need help but but cannot get to the New Thread button option to ask a question.
How do I get there?

Through the back door?
You just asked a question so you can let us know what's up with Firefox.
For future reference, you can ask a new thread at support.mozilla.org/questions/new and simply go through the prompts.
Also, if you lost a thread you were on, you can go to your profile and see your questions and answers by clicking your username at the top of any support.mozilla.org page. Your account is located at https://support.mozilla.org/en-US/user/1082275

Cannot find the new columns I added to a list a week ago

Hi, I'm using VS2012.
I added a couple of new columns to an existing list over a week ago. Using C# code, I was able to connect to the site and got the list. Able to update the columns until I got to the new column4, and then I got exception error. How
to fix this? Thank you.
exp = {"Column 'new-column4' does not exist. It may have been deleted by another user. /Lists/MyList"}
ClientContext context = new ClientContext("https://xxx.yyy.zzz");
List MyList = context.Web.Lists.GetByTitle("MyList");
ListItemCreationInformation itemCreateInfo = new ListItemCreationInformation();
ListItem newItem = MyList.AddItem(itemCreateInfo);
newItem["column1"] = column1Value;
newItem["column2"] = column2Value;
newItem["column3"] = column3Value;
newItem["new-column4"] = column4Value;
newItem["new-column5"] = column5Value;
newItem["column6"] = column6Value;
Thank you

Hi,
According to your description, there is an issue when you tried updating the value of a column.
Based on the error message, the column 'new-column4' may not exist in the current list, please check it from the UI of your list.
Or you can debug your code in Visual Studio to see whether there is a column named 'new-column4' in the current list.
Feel free to reply if there any progress.
Best regards
Patrick Liang
TechNet Community Support

Code is correct then why i cannot find the specified backgroung color ??

hi everyone!!
this is quite strange for me because i have been trying to set the background color but really can't understand why i an not getting it .Please help me out...
thanks a lot!
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.filechooser.*;
public class front3 extends JFrame{
      private JButton go;
      private JRadioButton download,split,zip,rename,Copymail;
     private ButtonGroup radioGroup;
      public front3()
      Container c = getContentPane();
      c.setBackground(Color.pink);
      c.setLayout(new GridLayout(0,1));
      setSize(530,120);
      setResizable(false); // to disable the maximize button
        ImageIcon ii= new ImageIcon("split.jpg");
        split=new JRadioButton("Splitter",true);
     ImageIcon ij= new ImageIcon("zip.jpg");
      zip=new JRadioButton("Zipper",ij,false);
     ImageIcon ik= new ImageIcon("rename.jpg");
      rename=new JRadioButton("Rename all",ik,false);
     ImageIcon il= new ImageIcon("copymail.jpg");
     Copymail=new JRadioButton("Copy Mail",il,false);
     ImageIcon im= new ImageIcon("download.jpg");
     download=new JRadioButton("Download",im,false);
c.add(download);
      c.add (split);
      c.add(zip);
      c.add(rename);
      c.add(Copymail);
setSize(300,500);
          show();
setVisible(true);
public static void main(String args[])
              front3 f=new front3();
              f.addWindowListener(
                   new WindowAdapter() {
                        public void windowClosing(WindowEvent e)
                             System.exit(0);

Couple of things:
* either use your brackets like this:if(boolean) {
}or like this:if(boolean)
}but not both styles: it looks messy.
* in Java it is a convention that variable names and method names always start with a lower case letter. Class names start with an uppercase. Of course you can make up you own coding style, but imagine that when you work with a couple of fellow students (or co-workers) on a project and everyone would use their own style: your code would be hard to read!
* The linesshow();
setVisible(true);do the same thing. Remove the show() since it is deprecated.
Now, for your problem. The background of your JFrame is indeed changed, but you are placing other components on top of your JFrame so you can't see it's background color any more.

In Firefox version 4.0.1 (Mac OSX 10.6.7) I cannot find the "New Tab" tool button in Customize Toolbars.

In Customize Toolbars there is no longer a New Tab tool button to place on the tool bar, there is only a New Window tool button. Has this been deleted from the latest version?

Is Mail still "spinning"? If it's been doing that for a while, I'd kill it, using either Activity Monitor or the OS X application picker. Then relaunch Mail and see what happens.
Two "by the ways":
1) Your system details mention an PPC iMac. Since a non-Intel Mac can't run OS X 10.6, you seem to have another Mac. You might want to consider updating your system details.
2) You seem to have been misled by the poor labeling of the message composition fields on this forum into trying to enter your entire post into the "subject" field. In the future, just enter a summary of your post there and the main text into the field below it.

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

HT201365 Can I turn off this update. I can't see the new lighter colors.

Can I uninstall this new update? I cannot see the new lighter colors.

Hi Hazel,
From what I have read here it is not possible to downgrade - I wish it was!!!
Some replies say that people should have researched what iOS7 would look like before upgrading but to be honest I just did not believe that it could be as bad as it turned out to be.
I have sent feedback to Apple here and would encourage you to do the same - they need to know how difficult it is now the visual contrasts are so poor:
http://www.apple.com/feedback/iphone.html
If you go to Settings -> General -> "Accessibility" it helps a little to do this:
Larger type: ON
Bold text: ON
Increase Contrast: ON
I found that the "Invert Colors" option did not help as it made many controls even more difficult to see!
I have never had to use the Accessibility settings before - the design of iOS7 is a wonderful if unwelcome illustration of the Social Model of Disability in action! Apple used to excel at accessible design. The difference between iOS7 and all previous versions illustrates perfectly that bad design is disabling!

How do I find the new colors in Pantone Formula guide in InDesign CC?

It seems like the Pantone library in InDesign is not updated. I can't find the newly added colors from the Formula guide I just bought. (pantone solid coated/uncoated)
For examle color 2248. Where do I find the new colors and how do I add them to my colorpanel?
I hope there is someone who can help me with this!

Check this discussion it may help
http://forums.adobe.com/message/5737194#5737194

Indesign CS4 Pantone color book, Solid Coated giving the wrong color

I am trying to add a Panton color to my swatches panel. Under Swatches I am selecting "New Color Swatch -> Color Type: Spot ->Color Mode: Solid Coated". What happens next is get a box where I can type the Pantone number I would like ... to the left of this box it reads "Pantone DS". So all of the color choices I might make are not for "Solid Coated" but rather for "DS". I have no idea what "DS" is and it is not what I selected. I selected "Solid Coated". Once again, I am using Indesign CS4 on a Mac Pro ... still running OS 10.4. Can someone please assist me?
Thank you in advance.

Thank you for your response. I have checked the pulldown menu several times. I have checked again as of reading your response. It seems that no matter what Pantone choice I select under the Color mode I get your second window that you posted. On top of that, I have captured the window that comes up when I initially start the add new color swatch .... it looks like this ....
Please notice that the Pantone DS is already beside where you would key in the Pantone number, even though the color mode I am in is CMYK. This does not change when I switch to Spot as shown below.
So I do not believe there is something flawed about my method. It seems as if the Pantone Color Book information is missing for everything else other than the Process Coated.

Setting up my new Airport Extreme and it cannot find the IP address? The modem works fine when I bypass the Airport.

Setting up my new Airport Extremem and it cannot find the IP address.

Re: Airport Extreme IP Address Issue
After hours of trying everything else, this worked!!!
From: Comcast Networking/Router/Wifi Gateway:
Re: Airport Extreme IP Address Issue
11-20-2012 07:11 PM
MyComputerGuyJo:
I just wanted to add what Apple Support walked me through. Worked perfectly. Similar to some of the posts here. This assumes you have finished the setup of the Airport using DHCP to obtain the IP automatically from Comcast and it says the IP is invalid.
Power off\on Sequence
1, Power off Comcast Modem. Remove Battery back up, if it has one. Disconnect the coax cable.
2. Power off Airport Extreme
3. Let both sit for 3 minutes.
4. Reconnect coax cable to Comcast modem and replace battery and power up.
5. Wait a minute or two to make sure the Comcast modem is completely up and then Power on the Airport Extreme.
(When AP asks for DNS, Type in both addresses below)
Re: Airport Extreme IP Address Issue
11-01-2012 03:07 PM
Freyfisher: I had the same problem whenn I switched to the Airport Extreme yesterday. Here is what I did:
1: uplugged modem for 30 sec. and detached all ethernet cables. Plugged back in and reattached airport extreme cable after all lights were solid on the modem. Then, I went into Airport Utility and selected, "Base Station"> "restore default settings". Then" Base Station"> Restart. Then go through setup assistant again. If no luck, try setting IPv4 to 10.0.1.2, subnet to 255.255.255.0, router to 10.0.1.1. IPv6 set to OFF if having trouble. DNS adresses: 75.75.75.75, 75.75.76.76, search domain hsd1.ST.comcast.net where "ST" is your two-letter State abbrev. Hope this helps someone....

I actually need help but cannot find the answer. Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as

I actually need help but cannot find the answer.
Please.......Lately when open a new tab it does not open with a blank page. I don't want to set my homepage as blank as when I first open Firefox, it automatically loads my hotmail page. But then if I open other pages I don't get a blank page. Help, please?
Thank you.
''[Personal information removed by moderator. Please read [[Forum and chat rules and guidelines]], thanks.]''

hello, please refer to [[New Tab Page – show, hide and customize top sites]] in order to switch the feature off.

I got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

got a new wireless connection for my mac and cannot figure out how to delete the last connection service I had. Everytime I shut the computer, the network goes back to the other one. I cannot find the file ANYWHERE

Under Network Preferences, select the WiFi
click on "Advanced..." button
Select the network you want to delete from the list and click on "-"
Click "Ok"
Click "Apply"
Well done ;-)
You may also want to delete the wireless key from Keychain.
Open Keychain, seach for the old wifi network name, slect it and click delete

How do i find out what my serial number is? I cannot find the software and need to put it on a new computer. How do I do this?

I cannot find the software and need to put it on a new computer. How do I do this? I do not remember where the software is yet it is on my computer along with Photoshop CS6 extended. I have that disk but cant find anything else.

gr8gear,
You can see (only) part of the registration number under Help>About Illustrator.
If you have registered it with Adobe (optional up to CS4), you should be able to see it on your products page
https://www.adobe.com/account/my-products-services.html
Otherwise, you may ask in a chat here (depending on version):
Creative Cloud support (all Creative Cloud customer service issues, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service-ccm.html
Serial number and activation support (non-CC, chat open between 5AM and 7PM PST/PDT on workdays)
http://helpx.adobe.com/x-productkb/global/service1.html

Cannot find the new pms colors Pantone + solid coated

Similar Messages

Maybe you are looking for