Cannot find the Recv Logical system in Distribution Model
HI experts,
Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system... Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
Could u tell me how to solve this prob???
Regards
Balaji
Hii Ravi,
Thanks for your reply,
Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
I have assigned the meta data to that port using tcode idx2.
And I have created port with port name "PORT800" in R3 using we21 and give the RFC destination which points the PI system
when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
now im getting error like "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
Similar Messages
-
Changing the default logical system names for adaptive RFC models
Hello,
When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
Thanks in advance!
David.Suresh,
Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
Hope that clears up what I'm looking for.
David.
Message was edited by:
David Z. Pantich -
Error [0x80070003] The system cannot find the path specified
We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS. We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night. The backup shows completed with warnings and generates
2 log files.
The first log files shows:
Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Backup of volume F: succeeded.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
Caption : Backup Using Child Partition Snapshot\FMLRDS1
Logical Path:
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
The 2nd log file more often than not shows:
Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
ShadowStorage' command.
Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
Caption : Backup Using Child Partition Snapshot\FMLDC1
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.
We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows: E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
error in the snapin and will unload and then it shows Object referenced not set to instance of an object." The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.
Any idea as to why this is failing during the scheduled backups? This hosts a database that we need to have regular successful backups.Hi,
First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
1. Click Start, click Run, type cmd, and then click OK.
2. Type the following commands at a command prompt. Press ENTER after you type each command.
3. cd /d %windir%\system32
4. Net stop vss
5. Net stop swprv
6. regsvr32 ole32.dll
7. regsvr32 oleaut32.dll
8. regsvr32 vss_ps.dll
9. vssvc /register
10. regsvr32 /i swprv.dll
11. regsvr32 /i eventcls.dll
12. regsvr32 es.dll
13. regsvr32 stdprov.dll
14. regsvr32 vssui.dll
15. regsvr32 msxml.dll
16. regsvr32 msxml3.dll
17. regsvr32 msxml4.dll
Please let us know if any command failed to be performed with an error.
If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected] -
Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
Error message on my development workstation: The system cannot find the file specified.
Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
Inherits System.Web.UI.Page
Private objOpenFilesreport As OpenFilesReport
Private rptOpenFiles As ReportDocument
Private strLastErrorMessage As String = Nothing
Private errLastException As Exception = Nothing
Dim strFileKey As String
Dim strJurisdictionCode As String
Dim strStaffId As String
Dim strReportId As String
Private Sub ConfigureCrystalReports()
Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
Dim rptopenfiles As New ReportDocument
rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports folder of my project
Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
ConnectionInfo.DatabaseName = my database
ConnectionInfo.UserID = login id of user
ConnectionInfo.Password = user's password
SetDBLogonForReport(ConnectionInfo, rptopenfiles)
CrystalReportViewer1.ReportSource = rptopenfiles
End Sub
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
ConfigureCrystalReports()
End Sub
Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
Dim myTables As Tables = myReportDocument.Database.Tables
For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
myTableLogonInfo.ConnectionInfo = ConnectionInfo
myTable.ApplyLogOnInfo(myTableLogonInfo)
Next
End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severinhello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.
-
I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
The save for the web function has stopped working in my copy of photoshop elements 12. I get this message, “ The operation could not be completed. The system cannot find the path specified” Resetting preferences did not fix.
my os is windows 7. elements 12 worked fine for many months then save for the web stopped working
-
when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what. -
I have restored one web application in SharePoint Server 2010 from a different domain and can complete successfully. Changed each users domain also to old to new one by using Move-SPUser. But While accessing the site collection it is showing an error
that "Could not load file or assembly 'A##.SP.Intranet, Version=1.0.0.0, Culture=neutral, PublicKeyToken=03b4f320ebedaffc' or one of its dependencies. The system cannot find the file specified."
What may be the reason? Please help me to solve this issue since I am stuck up on this .
Regards
Mine1981Hi Nico
Martens,
Thank you for your reply. But
how can I find out the custom solutions in the source farm. I didn't got any other details regarding this farm other than WSS_Content, Web application Database, SharePoint_Config database back ups.
Please help me to solve the
issue.
Regards
Mine -
I got maven 221 installed
i got jdk 1.6 and 1.5 installed (have tested both)
I have a strange error. All my co-workers can build but I cant. The only thing I can find is that I dont have installed BEA Weblogic but I dont want to have that installed. It should be able to run anyway.
Could someone tell me what is wrong? If you need pom.xml I got that one as well.
process-classes:
[copy] Copying 4 files to C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content
[mkdir] Created dir: C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-jar
[java] Creating an MJF from the contents of directory C:\hudson\jobs\albpm_ip-identity-asserter_-_Build\workspace\target\mbean-content...
[java] Compiling the files...
[java] Creating the list.
[java] Doing the compile.
[java] WLMaker-SubProcess: : Exception in thread "main" java.lang.Error: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:93)
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.main(BeanGenDriver.java:117)
[java] WLMaker-SubProcess: : Caused by: java.util.zip.ZipException: The system cannot find the file specified
[java] WLMaker-SubProcess: : at java.util.zip.ZipFile.open(Native Method)
[java] WLMaker-SubProcess: : at java.util.zip.ZipFile.<init>(ZipFile.java:203)
[java] WLMaker-SubProcess: : at java.util.jar.JarFile.<init>(JarFile.java:132)
[java] WLMaker-SubProcess: : at java.util.jar.JarFile.<init>(JarFile.java:97)
[java] WLMaker-SubProcess: : at weblogic.management.commo.BeanGenDriver.getManagementTempDir(BeanGenDriver.java:90)
[java] WLMaker-SubProcess: : ... 1 more
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] WLMaker-SubProcess: : Stopped draining WLMaker-SubProcess:
[java] BeanGen code generation failed
[HUDSON] Archiving C:\hudson\jobs\albpm_ip-identity-asserter_-Build\workspace\pom.xml to C:\hudson\jobs\albpmip-identity-asserter_-Build\modules\dk.skat.ip.integration.albpm$ip-identity-asserter\builds\2010-11-2213-41-28\archive\dk.skat.ip.integration.albpm\ip-identity-asserter\1.2\pom.xml
[INFO] ------------------------------------------------------------------------from my experience, using weblogic jars can be a pain if the full install is not on the local box.
Note that you dont have to 'install' it. Just copy the directory.
Reason is that the jar files have manifests with relative classpaths.
For an example of horror take a look at the weblogic.jar MANIFEST's classpath entry.
-Fred -
When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.
-
hi
when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
i use the windows 7Zohre
What version of the CAD software are you trying to install? Is it compatible with win 7? Older installations (on older OS) installed to a different default location that win 7 does not have.
Wanikiya and Dyami--Team Zigzag -
Upgrading from MBAM 1.0 to 2.5 on the Administration and Monitoring server (database server already upgraded). To upgrade the administration server, I uninstalled MBAM 1.0 -> Deleted the MBAM website from IIS manually -> Reboot -> Installed MBAM
2.5. After upgrade if I go to selfservice portal via
https://myserver.mycompany.com/selfservice, I get this error:
Server Error in '/SelfService' Application.
Could not load file or assembly 'System.Web.WebPages.Razor,
Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its
dependencies. The system cannot find the file specified.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
System.IO.FileNotFoundException: Could not load file or assembly
'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot
find the file specified.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.]
System.Web.Mvc.PreApplicationStartCode.Start() +0
[InvalidOperationException: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.Compilation.BuildManager.InvokePreStartInitMethodsCore(ICollection`1 methods, Func`1 setHostingEnvironmentCultures) +12980619
System.Web.Compilation.BuildManager.InvokePreStartInitMethods(ICollection`1 methods) +12980328
System.Web.Compilation.BuildManager.CallPreStartInitMethods(String preStartInitListPath, Boolean& isRefAssemblyLoaded) +280
System.Web.Compilation.BuildManager.ExecutePreAppStart() +172
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters, PolicyLevel policyLevel, Exception appDomainCreationException) +1151
[HttpException (0x80004005): The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified..]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +12979668
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +159
System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) +12819261
Anyone know how to solve this? Thanks in advanceSorry for late response. I fixed the issue by installing the correct version of ASP .NET 4 from
here.
If .NET Framework 4.5 is already installed, also run aspnet_regiis -i from C:\windows\microsoft.net\Framework\v4.0.30319 -
"The system cannot find the path specified" error
Hi, Thanks for taking the time and reading.
I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
i get an exception. I have tried a few different formats and it spews the same error.
Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
Things i have tried:
I installed: CRRuntime_64bit_13_0_13
I installed: CRforVS_13_0_13
Took a look at the Procmon and i could not find an access denied error
Event Viewer has no detail.
Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
Code:
if (!Directory.Exists(filePath))
Directory.CreateDirectory(filePath);
string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
Error message:
System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
System Details:
Windows 7 Enterprise N 64 bit
ServicePack 1
IDE:
Visual studio 2010 .Net framework 4
Application is set to run as "Any CPU"
CrystalReports :
dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
Thanks for your helpI don't see where you're ever setting the logons for the tables in the report and subreports. The reports with saved data are working because they already have data in them. The reports without saved data are not working because they don't know how to connect to the database.
See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
-Dell
Maybe you are looking for
-
I bought a used iPod touch and when I try to set up my iCloud account, it says that the maximum number of free accounts have been activated on this device. Is there a way around this? I thought I could maybe set up the account on my PC and go from th
-
Can you do a post to a URL in APEX
I know that you can format a url to pass values in the URL string like this: https://mydomain/pls/apex/f?p=115:1::::P1_ID:23709462 Or can you submit a post request instead of a get like the following PHP example? Url=https://mydomain/donor/tnt_accoun
-
PRE 7 Error: Adobe Premiere Elements.exe stopped working
Today I started getting Adobe Premiere Elements.exe has stopped working and than the program closes. Does anyone know how I can fix this? I un-installed and re-installed it and still get the same thing.
-
Smart Folders not displaying emails
I have a few smart folders set up that I use on a daily basis in Mail. One displays all the mail that came in Today, one for Yesterday etc. After upgrading to Yosemite, the folders are no longer displaying the messages (in the Unread folder it says 3
-
JSF/JSP design view not displaying correctly
Hi there I am using jdeveloper version Studio Edition Version 11.1.1.3.0 on windows 7. When I create a 3 column layout JSF page , the design view does not show 3 columns (This used work properly). Instead it shows . - <>/oracle/templates/threecolumnT