"cannot find the scanner on the bus"

I attached Epson 2450 scanner via firewire but when I open Photoshop I get the message "cannot find the scanner on the bus, Please ensure that it is switched on, ready to scan and that the cables are attached correctly." That message stays on top of all windows and the "ok" button is useless. I searched and trashed every item "...USB scanner.." in the Library/Application Support/Epson scanner module and the message still shows up. The only way the scanner is attached is via firewire. I have successfully scanned 35 mm slides in from the scanner until this message started showing. How do I get rid of it?

The first thing I did when connecting the scanner was to get the updated, most recent drivers. I have downloaded the driver a second time and yesterday everything was fine. Today, I started Photoshop and turned on the scanner and there's that dratted message again that won't go away. I downloaded the latest drivers again this morning, restarted everything and still get the message that won't go away as long as the scanner is on. I have to turn off the scanner and restart to get rid of it, but then I can't scan. I have submitted my problem to Epson support and get no answer.

Similar Messages

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output.

After I upgraded to Mavericks my Epson 5000V scanner is not working properly. I can scan by going into Preference/PrintersScanners to operate the scanner, but I cannot find the output. I am trying to save the scan as a PDF in Documents.

Have you installed Apple's latest Epson drivers?
They are here:
http://support.apple.com/kb/DL1398

I purchased Adobe Acrobay XI with a fujistsu scanner. I cannot find the cd it came with and I need a product key to download onto my new computer. Please advise

I purchased Adobe Acrobat XI with a fujistsu scanner. I cannot find the cd it came with and I need a product key to download onto my new computer. Please advise

Hey Jacob,
You might need to contact Adobe Customer Service to seek assistance for the same.
Contact Customer Care
Regards,
Anubha

Cannot find the XObject named Fm0003.

I am built a three page AOD report. When I run Test Presentment, the first two pages of the pdf display correctly on the screen, as I page down. When I page down to the third page I get the above message --"Cannot find the XObject named Fm0003". I click OK, and then get the following message --"Could not find font in resource library, using Helvetica instead". The font that I'm using throughout the report is a Times New Roman. The first two pages are in Times New Roman and the third page is in a different font. I welcome anyone who can educate me to what is happening in AOD. Thanks.
Questions:
* How do I find the XObject named Fm0003?
* How do I determine what font is missing from the resource library?

Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

Installation of Firefox failing with a 7-Zip Error Box stating "The System Cannot find the File Specified"

When I upgraded to the latest Firefox on my Windows 7 PC , I get a 7-Zip Error Box stating " The System cannot find the file specified". This happens approximately two thirds into the installation. I have tried turning the Virus checker off and re-installing, but to no avail.

Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test.
*http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
Try this:
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
*Start the installation with a double-click on the desktop icon
Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
*https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware

Setup cannot find the Geforce4 4200 device

Hello,
I've just bought a Geforce4 4200 128MB MSI card which replaced my old voodoo3 3000 card.
The BIOS seem to be able to communicate with the card as the card name shows when I turn on the computer.
The problem is when I try to run the CD's setup program , it says "cannot find the device in your system".
When I tried to view PCI information in linux , it printed out the following:
"bus 1 , device 0 , function 0
VGA compatible controller: PCI device 10de:0254 (nVidia corporation) (rev 163)
IRQ 11." , and some more infromation regarding memory addresses.
I'm running win95 on Celeron III 600MHz.
Is the above PCI information makes sense? Why cant the windows installation find my device?
Thank you for your responses,
Ishai

remove any device from system that has something to do with v. card...and all "unknown devices", reboot and try again. if not install drivers manualy...may be will work

In the new Pages 5.0, what is the page break shortcut key. I cannot find the key as indicated on the drop down menu.

in the new Pages 5.0, what is the page break shortcut key (it used to be the Fn + enter). I cannot find the (new) key as indicated on the drop down menu. Please help.

Hi Bruce and fruhulda,
ok, I found the keyboard viewer, it only shows the traditional symbol 'return'. something like a sideway u-turn continued with the arrow under. This is the Canadian or US keyboard.
btw thanks for your suggestion.

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"

Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)

Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
          •          Server name: imap.mail.me.com
          •          SSL Required: Yes
          •          Port: 993
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
SMTP (outgoing mail server) information:
          •          Server name: smtp.mail.me.com
          •          SSL Required: Yes
          •          Port: 587
          •          SMTP Authentication Required: Yes
          •          Username: [email protected] (use your @me.com address from your iCloud account)
          •          Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file. I have run a number of searches and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps. The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members. I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

My apologies Eadeszoo I believe our support agents are unavailable on January 1.
Are you able to copy the contents of the DVD to your computer? Are you receiving any particular error messages when you are trying to install? Finally which operating system are you using?

I am so angry - there has to be a misundering. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone

I am so angry - there has to be a misunderstanding. my Itunes was disabled as there was a charge that I did not authorize and I cannot find the phone number for security and the dingbat girl who I'm emailing send me a link that does not work. And I am extremely frustrated. Please help. I need a phone # to contact security.

Contact Apple Support here:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

I used to have over 2000 songs in my itunes library, now there are only a few and I cannot find the others.

I used to have over 2000 songs in my itunes library, now there are only a few and I cannot find the others.

See this post.
tt2

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

HT201317 I am trying to upload photos from my Windows 7 machine, and I was told to drag them into the photo stream in the iCloud control panel. I have downloaded the control panel several times, but cannot find the place to upload the photos from my Windo

I am trying to upload photos from my Windows 7 desktop, and was told to go to the iCloud control panel and drag the photos into the
upload to photo stream icon. I have downloaded the contol panel several times and cannot find the icon to get this done. HELP

If you're trying to add photos to photo stream on your PC, you drag them to your photo stream uploads folder (normally My Pictures\Photo Stream\Uploads).

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

I put in my memory card to the left side of the computer, but I cannot find the file of pictures anywhere. Its not even on my desktop. What should I do and how can I get it to show up on my desktop?

If your Mac is new-ish and has one of the Lions as its OS, the drives, cards, USB sticks no longer show up, even though they're there. Go to Finder's Preferences and tick the corresponding items in the General and Sidebar tabs.

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
 Inherits System.Web.UI.Page
 Private objOpenFilesreport As OpenFilesReport
 Private rptOpenFiles As ReportDocument
 Private strLastErrorMessage As String = Nothing
 Private errLastException As Exception = Nothing
 Dim strFileKey As String
 Dim strJurisdictionCode As String
 Dim strStaffId As String
 Dim strReportId As String
 Private Sub ConfigureCrystalReports()
 Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
 Dim rptopenfiles As New ReportDocument
 rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports folder of my project
 Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
 ConnectionInfo.DatabaseName = my database
 ConnectionInfo.UserID = login id of user
 ConnectionInfo.Password = user's password
 SetDBLogonForReport(ConnectionInfo, rptopenfiles)
 CrystalReportViewer1.ReportSource = rptopenfiles
 End Sub
 Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
 ConfigureCrystalReports()
 End Sub
 Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
 Dim myTables As Tables = myReportDocument.Database.Tables
 For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
 Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
 myTableLogonInfo.ConnectionInfo = ConnectionInfo
 myTable.ApplyLogOnInfo(myTableLogonInfo)
 Next
 End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
 CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
 CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
 CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
 CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
 CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
 CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
 CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
 CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
 CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
 CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
 System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

"cannot find the scanner on the bus"

Similar Messages

Maybe you are looking for