Cannot find the thread I started
I cannot import files from my CF card (Canon 5D MarkII) to lightroom 5.3. They will import to Macintosh HD. Therefore there is enough room. Cannot read the files to import them. I don't know what folders I was putting them in when I first started importing them. I have about 1,000 images in lightroom now. I was importing them by date. Did that put them into a file? I need to stop with this many questions, I think.
According to the software used here at Adobe to run this forum, this is your first post. So we can't find the thread you started either ... but ... this speaks to an issue about organization ... if you can't find your threads here in the forums, I'm not surprised you can't find your photos either, and neither state of affairs is good. Perhaps you might want to commit to being more organized about photography and forums and the like. Just a thought.
If you are getting a message from Lightroom about "cannot read the files to import them", or something like that (in the future you might want to state the exact error message, word for word, verbatim, exactly as it appears on your screen, without alteration — just so we don't have to guess what the error message really said), I will guess that you did not have WRITE permission to the destination folder when ytou tried to import them. But that's a guess. It would really help to know the exact, verbatim, word-for-word error message.
I don't know what folders I was putting them in when I first started importing them.
Lightroom knows where the photos are. That is one of the reasons we use Lightroom, because it remembers these things better than humans can. I suggest you look for them in Lightroom, and the folder that contains the photos will be available to you by looking in the Metadata Panel on the right, with the dropdown set to "Default", next to "Folder".
I have about 1,000 images in lightroom now. I was importing them by date. Did that put them into a file?
Lightroom does not store your photos, your photos are stored on your hard disk somewhere, in the location you put them, or in the location you told Lightroom to put them. So, "Did that put them into a file?" — the answer is NO.
Similar Messages
-
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.
-
I accidentally set up my new ipad in itunes under the name of my existing ipad and need to set it up as a new device. Help. I cannot find a way to start fresh.
That's probably not a good idea to try to share apps since you will have to switch ID's each time you update apps and sync apps from iTunes.
And technically - according to Apple's terms - you cannot share apps using different ID's. You can actually lock yourself out of an ID for 90 days if you switch ID's and if you associate the iPad with another ID.
The bold type is a copy and paste from the site that I referenced below.
When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
http://support.apple.com/kb/ht4627 -
I just downloaded itunes to my PC but cannot find the library page to start transporting music files
I just downloaded itunes to my PC but cannot find the library page to start transporting music files ?????
I have music on a stick drive which I want to transport to itunes on my desktop PC running Vista. I downloaded itunes but cannot find a page on itunes to load the music onto.. When I put the stick into the USB port, an AutoPlay box comes up which says Play using .Windows Media Player..............Import music, pictures, video using Real Player. Open folder to view files using Windows explorer etc.....& set Auto Play Defaults in control Panel. By library page, I mean the page on itunes where the music would be transported to & listed by each name so I can listen to it.
-
Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
DimitriHi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Starting Server "The system cannot find the path specified".
Hi,
When trying to start Sun Java SystemApplication Server 9.1 I get the message "The system cannot find the path specified".
I have PATH = C:\Sun\AppServer\bin;C:\Sun\AppServer\lib\ant\bin;
Windows XP SP 3.
Suggestions please!
LouAre you trying to start it as a system service or just from a command prompt?
You may need to add the lib directory to the PATH as well, ie C:\Sun\AppServer\lib and don't forget to reboot if it is a system service. -
"The system cannot find the path specified." error message when trying to start instaling a software
hi
when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
i use the windows 7Zohre
What version of the CAD software are you trying to install? Is it compatible with win 7? Older installations (on older OS) installed to a different default location that win 7 does not have.
Wanikiya and Dyami--Team Zigzag -
Addon Start error - The system cannot find the file specified
All, I am getting the above error when trying to connect an add-on. It's the budget editor in the SDK Samples. Compiled in vb.net, with the installer created from B1DE. The addon installs without a problem. It is only when connecting the add-on in the add-ons screen. The error message indicates it cannot find the BudgetEditor.application file. Does this file need to be included in the installer, the add-on folder in B1 or somewhere else?
thanksHi,
Are u able to run the code and execute the aplication.?
Vasu Natari. -
The system cannot find the path specified - Problems
I am having an issue that I am hoping someone can help figure out for me.
I am currently learning Java, and am working with the Beginning Programming with Java for Dummies book second edition. I have downloaded and am running the Java 6 program and am using the JCreator 3.5Pro that was recommended to run the Practice files for the Dummies book.
I have the practice files here:
C/Program Files/Xinox Software/JCreatorV3/My Projects
While trying to compile one of the practice files, I get this error message:
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_mynewproject.txt (The system cannot find the path specified)
Process completed.
**When I try to execute, I get this error message:**
--------------------Configuration: MyNewProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: EchoLine
Caused by: java.lang.ClassNotFoundException: EchoLine
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: EchoLine. Program will exit.
Exception in thread "main"
Process completed.
When I set up the new file, and the new class, I confirmed the file path.
I know most people will ask if I am absolutely certain I put in the code in properly, and yes I did. It was a matter of copying word for word, and punctuation. I did it 100% correctly. About 12 times. I have NO idea what this means, but I would REALLY REALLY appreciate any help on this.
Please keep in mind, I am slightly clueless, and really need to have any help dumbed down a bit. Lol.
As a side note, this isn't my first project, and I haven't had this problem before now.
thanks in advance. =)So I wanted to clarify what I've done a bit more since I decided to redownload the dummies programs for the program and try again.
I will try to list my steps in order of what I did and see if I've gone wrong somewhere along the line.
I downloaded my project files from here: http://ca.dummies.com/store/product/Beginning-Programming-with-Java-For-Dummies-2nd-Edition.productCd-0764588745,navId-322469,descCd-DOWNLOAD.html
I unzipped them this time here: C:\Program Files\Java\jdk1.6.0_21\MyProjects\
I opened JCreator 3.5 and starting fresh, with all previous projects deleted and clicked on "Open Workspace". I chose "MyWorkspace.jcw". Right clicked MyWorkspace and chose "Add new Project" and then chose "Empty Project". As per the books instruction for the first project, I named it "MyFirstProject". My file path was: C:\Program Files\Java\jdk1.6.0_21\MyProjects\MyFirstProject. Which is where I upzipped the files. I added it to current workspace and clicked finish.
I then added a new class. As per the books instructions, I right clicked "MyFirstProject" and selected Add New Class. For the name, I used MyFirstJavaClass, which is what the book told me to do. My locations are the exact same as above. and I clicked on Generate new Method, as it told me to. Which it doesn't in the next few lessons, so I know this has nothing to do with it. For that and a few other reasons. Lol.
I clicked on Finish.
All I had to do was replace a single line of code. Not type it all in this time.
Here is what shows up on the screen:
class MyFirstJavaClass {
* Method main
* @param args
public static void main(String[] args) {
// TODO: Add your code here
I need to change the : // TODO: Add your code here
with the line:
System.out.println.("Chocolate, royalties, sleep");
When I do this, and compile project, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
javac: file not found: src_myfirstproject.txt (The system cannot find the path specified)
Process completed.
AGAIN! But it worked a few days ago.
And when I execute, I get this:
--------------------Configuration: MyFirstProject - JDK version 1.6.0_21 <Default> - <Default>--------------------
java.lang.NoClassDefFoundError: MyFirstJavaClass
Caused by: java.lang.ClassNotFoundException: MyFirstJavaClass
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
Could not find the main class: MyFirstJavaClass. Program will exit.
Exception in thread "main"
Process completed.
I really hope the extra info helps someone help me!
thank you!
Edited by: MissPamela on Jul 19, 2010 3:23 PM -
Exporting ReportDocument fills up memory, then throws "The system cannot find the file specified"
Hi,
When exporting a perfectly viable ReportDocument to pdf like this:
Dim ms As IO.MemoryStream = New System.IO.MemoryStream
ms = rpt.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat)
(rpt being the ReportDocument), the process starts to fill up memory at a couple of megabytes per second rate, and eventually throws Exception:
"The system cannot find the path specified."
stacktrace:
at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType)
at {the ExportToStream invocation in my own code}
The same thing happens when I invoke the regular Export() method with any DiskFileName.
My environment is VS 2012 (premium) and I'm using CRforVS_13_0_13 (32-bit version). The programming language is VB.NET.
A similar problem seems to be discussed here: CR2008 - "The system cannot find the path specified", but the difference is there's no errors in my formula's. The report gets displayed and printed out fine. It's just the exporting that does not work. Any ideas about how to fix this?
Thanks,
StefanSee Don Williams response here: http://scn.sap.com/thread/3713889
You cannot export using MemoryStream - you have to use IOStream.
-Dell -
MDT2012 - Deployment failed, the system cannot find the file specified
Hi everybody.
First, excuse me for my english, i think it's not the best thing I'm able to do, but now, I REALLY need help.
I encounter issues with my MDT 2012 Update 1 platform.
I have 5 systems to capture. All systems have 3 partitions (System, softwares, data). Capture is working fine for all parts.
In my Task Sequence, to deploy these images (C, D and E parts), I use a script after the "Install Operating System" which runs imagex to deploy the WIM images for D: and E:.
The script is the following :
"%DeployRoot%\Tools\x64\imagex" /apply "%DeployRoot%\Operating Systems\D_Drive\D_Drive.wim" 1 %DDrive%"
But, for some images, the task fails on the "D" drive deployement. The wizard shows the following error :
Litetouch deployment dailed, return code = -214767259 0x80004005
Failed to run the action: InstallD (ie : the script above)
The system cannot find the file specified. (Error: 00000002; Source: Windows)
The error is on my task which uses imagex to deploy my D and E WIM.
So I looked to see if the file's path was the good one.
And it is !!!
Wizard says that the file couldn't be find, but the file is existing, and in the good path.
For your information, there is no problem when I don't use multicast. Everything is working fine on unicast, not on multicast.
I even encounter this issue if I use my MDT server and my computers on the same switch.
Any help would be gratefull, my client gives me the week to resolve the issue.
ThanksBDD.LOG
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Will boot into Windows PE architecture x64 to match OS being deployed.]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property OSDisk is now = V:]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Open Control File: OperatingSystems]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[------ Applying Windows image using ImageX.exe ------]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41023 sent: LTI applying image \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim using ImageX]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property SourcePath is now = \\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer to directory: C:\MININT\Operating Systems\Master 3 avec Sysprep]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[<Message containing password has been suppressed>]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1348)]LOG]!><time="16:53:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 0 minutes (process ID 1348)]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Started.
]LOG]!><time="16:53:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41003 sent: ZTI Heartbeat: command has been running for 5 minutes (process ID 1348)]LOG]!><time="16:58:01.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Transfer Complete [0x0].]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Multicast transfer of "\\192.168.36.208\MDT$\Operating Systems\Master 3 avec Sysprep\CAPT.wim" to "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" completed successfully.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Cleaning off old operating system]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Skipping V:\Drivers]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:" \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0"]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Enabling 8dot3 name support on volume V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\imagex.exe" /apply "C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim" 1 V:]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread=""
file="LTIApply">
<![LOG[Command has been started (process ID 536)]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > ImageX Tool for Windows]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Copyright (C) Microsoft Corp. All rights reserved.]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 0% ] Applying progress ]LOG]!><time="17:00:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 0% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 1% ] Applying progress ]LOG]!><time="17:00:49.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 2% ] Applying progress ]LOG]!><time="17:00:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 3% ] Applying progress ]LOG]!><time="17:00:58.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 4% ] Applying progress: 5:28 mins remaining ]LOG]!><time="17:01:03.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 5% ] Applying progress: 5:33 mins remaining ]LOG]!><time="17:01:07.000+000"
<![LOG[ Console > [ 99% ] Applying progress: 3 secs remaining ]LOG]!><time="17:06:43.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > [ 100% ] Applying progress ]LOG]!><time="17:06:50.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Successfully applied image.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Total elapsed time: 6 min 7 sec]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property LTIDirtyOS is now = TRUE]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 5625 sent: The image C:\MININT\Operating Systems\Master 3 avec Sysprep\CAPT.wim was applied successfully.]LOG]!><time="17:06:51.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: "\\192.168.36.208\MDT$\Tools\X64\bootsect.exe" /nt60 V:]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1252)]LOG]!><time="17:06:52.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Target volumes will be updated with BOOTMGR compatible bootcode.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > V: (\\?\Volume{2ab15dec-99c9-19e3-baf6-94de80bab573})
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Successfully updated NTFS filesystem bootcode.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console >
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Bootcode was successfully updated on all targeted volumes.
]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Find the boot drive (if any) [True] [6.1.7601.18229] [False]]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDiskPartition : \\MININT-1H9O4H6\root\cimv2:Win32_DiskPartition.DeviceID="Disk #0, Partition #0" \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[New ZTIDisk : \\MININT-1H9O4H6\root\cimv2:Win32_DiskDrive.DeviceID="\\\\.\\PHYSICALDRIVE0"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Found bootable drive (No Boot File Test) [ V: ]: \\MININT-1H9O4H6\root\cimv2:Win32_LogicalDisk.DeviceID="V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Ready to Prepare boot partition: V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: cscript.exe //nologo "\\192.168.36.208\MDT$\Scripts\ztiRunCommandHidden.wsf" ""\\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe" V:\windows /l fr-fr /s V:"]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="LTIApply"
context="" type="1" thread="" file="LTIApply">
<![LOG[Microsoft Deployment Toolkit version: 6.1.2373.0]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[The task sequencer log is located at X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread=""
file="ztiRunCommandHidden">
<![LOG[Write all logging text to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Already connected to server 192.168.36.208 as that is where this script is running from.]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[About to run command: \\192.168.36.208\MDT$\Tools\X64\BCDBoot.exe V:\windows /l fr-fr /s V:]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Command has been started (process ID 1984)]LOG]!><time="17:06:54.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[ Console > Boot files successfully created.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Return code from command = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="ztiRunCommandHidden" context="" type="1" thread="" file="ztiRunCommandHidden">
<![LOG[Command has returned: 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: X:\WINDOWS\SYSTEM32\bcdedit.exe /Store "V:\boot\bcd" /timeout 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Created scratch folder.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Copy File: C:\MININT\unattend.xml to V:\Windows\Panther\Unattend.xml]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Copied unattend.xml to V:\Windows\Panther for image apply.]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[About to run command: dism.exe /Image:V:\ /Apply-Unattend:V:\Windows\Panther\Unattend.xml /ScratchDir:C:\MININT\Scratch]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command has been started (process ID 1516)]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Deployment Image Servicing and Management tool]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Version: 6.1.7600.16385]LOG]!><time="17:06:55.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > Image Version: 6.1.7600.16385]LOG]!><time="17:06:56.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[ Console > The operation completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Return code from command = 0]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="17:06:57.000+000" date="02-19-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Command completed, return code = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
<![LOG[Event 41014 sent: Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property RetVal is now = -2147467259]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Validating connection to \\192.168.36.208\Logs$]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Already connected to server 192.168.36.208]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[OSDTargetDriveCache was determined earlier : V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property OSDTargetDriveCache is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property OSDisk is now = V:]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LiteTouch.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LiteTouch.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTIApply.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTIApply.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\LTICopyScripts.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\LTICopyScripts.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\PnpEnum.xml to \\192.168.36.208\Logs$\MININT-1H9O4H6\PnpEnum.xml]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\Wizard.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\Wizard.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIBDE.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIBDE.log]LOG]!><time="17:10:54.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIConfigure.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIConfigure.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDiskpart.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDiskpart.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIDrivers.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIDrivers.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIGather.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIGather.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTINextPhase.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTINextPhase.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIPatches.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIPatches.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ztiRunCommandHidden.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ztiRunCommandHidden.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying C:\MININT\SMSOSD\OSDLOGS\ZTIValidate.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\ZTIValidate.log]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\TEMP\SMSTSLog\SMSTS.LOG to \\192.168.36.208\Logs$\MININT-1H9O4H6\SMSTS.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\Debug\Netsetup.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying X:\WINDOWS\System32\wpeinit.log to \\192.168.36.208\Logs$\MININT-1H9O4H6\]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Copying log C:\MININT\SMSOSD\OSDLOGS\BDD.log contents to \\192.168.36.208\Logs$\MININT-1H9O4H6\BDD.LOG]LOG]!><time="17:10:55.000+000" date="02-19-2014" component="LiteTouch" context="" type="1" thread="" file="LiteTouch"> -
Iam getting the 'The system cannot find the path specified.' Why?
C:\Documents and Settings\MPudur\Desktop>cd\
C:\>cd Training\ATG\ATG10.1.1\home\bin
C:\Training\ATG\ATG10.1.1\home\bin>startDynamoOnJBOSS.bat -c default -m Demo
The system cannot find the path specified.
The system cannot find the path specified.
Assembly started.
Target application is C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear.
Creating exploded ear file C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear.
Initializing...
Updating C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear.
Before make meta-inf file.
Making meta-inf file C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear\META-INF
Creating application.xml...
Creating Ear file MANIFEST...
Importing classes...
Importing classes for module DafEar
Importing classes for module DafEar.Admin
Importing classes for module DafEar.base
Importing classes for module Demo
Importing classes for module DSS
Importing classes for module DPS
Importing classes for module DAS-UI
Importing classes for module DAS
Ignoring classpath entry lib/servlet.jar from module DAS
Ignoring classpath entry lib/jsp-api.jar from module DAS
Importing classes for module manuals
Importing J2EE module atg-admin.war declared in DafEar.Admin
Parsing C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear\atg_admin.war\WEB-INF\web.xml
Importing J2EE module atg-bootstrap.war declared in DafEar.base
Parsing C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear\atg_bootstrap.war\WEB-INF\web.xml
Importing J2EE module atg-bootstrap-ejb.jar declared in DafEar.base
Importing J2EE module demo-web.war declared in Demo
Parsing C:\Training\jboss-eap-5.1\jboss-as\server\default\deploy\ATG.ear\demo-web.war\WEB-INF\web.xml
Assembly took 0.922 seconds.
Calling C:\Training\jboss-eap-5.1\jboss-as\bin\run.conf.bat
===============================================================================
JBoss Bootstrap Environment
JBOSS_HOME: C:\Training\jboss-eap-5.1\jboss-as
JAVA: C:\Training\Java\jdk1.6.0_30\bin\java
JAVA_OPTS: -Xms512m -Xmx1024m -XX:MaxPermSize=256m -Dorg.jboss.resolver.warning=true -Dsun.rmi.dgc.client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000 -Ds
CLASSPATH: C:\Training\Java\jdk1.6.0_30\lib\tools.jar;C:\Training\jboss-eap-5.1\jboss-as\bin\run.jar
===============================================================================You may refer your earlier thread:
Iam getting the path not specified error,but the jboss was running smoothly -
Cannot find the Universe (DA0011)
We have Migrated from Deski XIR2 to XI 3.1 FP4, when user either imports the report from the 3.1 repository or open Deski report they imported from the 3.1 repository they are getting the error Cannot find the Universe (DA0011). The user closes complete out of Deski and reopens and the report refreshes.
u2022 We have verified that the universe in the CMS as it was part of the migration
u2022 We have also verified that the user has security to the universe
Any help would be appreciatedHi Brad,
Thank you for the feedback. I had opened a case and was indeed hoping to be able to refer to yours. We were also facing this on our clients and there they gave us a workaround. Our universes folder on the clients points to a mapped networkdrive, by rewriting this path in UNC notation (so \\server\path...) this seemed to solve the problem.
What we also noticed was that the error on our clients only occurred the first time the deski application was started on the PC after reboot, refreshing the universes list in the universe panel or a restart of the application solved this.
So on the server I was thinking there might be a similar situation occuring. But I have to find a way to reproduce this.
If we ever get a solution for our problem I'll update this thread.
Regards
Guy -
Cannot find the specified instance ???
"If the instance has recently been initiated, the invocation data may not have been delivered to the engine yet. Refresh your browser window or try again in a few seconds."
I am getting the above error when i try to execute a BPEL process that does some DML operation on the database.
I doubt whether this relates to the database.
Please suggest.
Thanks,
RoshHi Marcelo!
I'm having the exact same problem. I've upgraded AS and BPEL PM from 10.1.3.1 to 10.1.3.3 As I found out in another thread (Cannot find the specified instance the problem could be in not running the upgrade sql script, but I did that.
When I initiate my process the number of Open Instances and closed instances remains 0. I've tried by deploying my process to default domain and a new domain I've created but it doesn't matter.
The message in my domain.log file is this:
<2008-01-22 13:52:32,976> <WARN> <MyTestDomain.collaxa.cube> <BaseCubeSessionBean::logWarning> Error while invoking bean "finder": [com.collaxa.cube.engine.core.InstanceNotFoundException: Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
ORABPEL-02152
Instance not found in datasource.
The process domain was unable to fetch the instance with key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" from the datasource.
Please check that the instance key "fa5790576a57cd77:-67b0033:117a188c804:-7fea" refers to a valid instance that has been started and not removed from the process domain.
at com.collaxa.cube.engine.data.AdminFinder.lookupInstanceByConversationId(AdminFinder.java:287)
at com.collaxa.cube.ejb.impl.FinderBean.lookupInstanceByConversationId(FinderBean.java:200)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:646)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at FinderBean_RemoteProxy_4bin6i8.lookupInstanceByConversationId(Unknown Source)
at com.oracle.bpel.client.Locator.lookupInstance(Locator.java:448)
at displayInstance.jspService(_displayInstance.java:123)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:131)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
I'd appreciate any suggestions on this.
Thanks!
BB
Maybe you are looking for
-
So, recently I've noticed something odd about my Thinkpad Yoga S1. I close the lid and put my computer away. Usually when I take it out, it has started to hibernate but today when I took out my computer, I noticed that it was quite warm and it was st
-
hi i have this query SELECT xoj.entry_date job_date, xoj.well, xoj.rig, xoj.job_type, xoj.job || xoj.job_type job_descritpion, xoj.opn_job_desc, lab2.well_depth, fvl.attribute1, xoj.contract, xoj.invoice_date, xoj.invoice_ref,
-
OM: Apply Hold after new a order line on line level..
Hi All, There is an issue that we have to apply hold on line level when order is changed.(include update line or new line) And we try to use trigger(with PRAGMA AUTONOMOUS_TRANSACTION) to call Apply Hold API. It work when existed order lines are chan
-
Material substitute in purchase requisition
Hi all! I know that in SD we can manage material determination, but I'd like to know if I can do the same in MM, using for example material substitute when I create a purchase requisition. Is it possible? Which is the best practise for this? Thanks S
-
Can some1 help me in changing the LookAndFeel of a JSP page?? What i want to do is create JButtons, JTextfields etc..... with a new LookAndFeel..just like we do for a swing JFrame...how can I do this for a jsp page ??