Cannot find time capsule, cannot back up

My time capsule will not back up. The message is that "the backup disk is not available". When I go to airport utility, it cannot find the time capsule. I cannot "connect to backup volume" if I try to open time machine. I have power cycled the router I'm connected to as well as the time capsule.
I am running OS 10.6.8. I just updated the firmware for my 1TB time capsule, but it stopped connecting before that.
Any help?

If you are using SL go back to 7.5.2 firmware.. there is no use to you have latest firmware.. it is much worse and adds nothing to SL. it was to help lion and failed miserably.
If you keep having the issue.. plug the TC into the Macbook.. with no other connections but the ethernet to LAN port of the TC. Turn off airport in the Macbook. Press and hold the reset for 10sec until the LED flashes rapidly .. then rename the TC and wireless.. use short names. no spaces.. pure alphanumeric.. (which is more for SMB issues true enough).
Fix and lock the wireless channels.. fix the wireless security to WPA2 Personal with passkey of 8-12 characters pure alphanumeric.
The TC disk should have no issues now but if you do, go to the file sharing page and turn on the guest account and give read and write access.. Still got issues then the hard disk could have failed.. look at the log.

Similar Messages

  • What does unable to print, cannot find time capsule mean?

    What does unable to print, cannot find time capsule mean?

    It is a communications error, read the posts to the right "More like this" maybe you will find some info there.

  • Will Time Capsule also back-up an external drive?

    I have a Time Capsule which I originally bought thinking it was both a back-up and extra memory device. I now also have an iomega network hard drive, and so need Time Capsule to back-up both my hard drive AND this external drive. Yet i can't seem to find how to do this in Time Machine. Can anyone help???

    Time Machine can backup an external drive that is connected directly to your Mac via USB or Firewire, but it cannot backup a network drive.
    If you need to backup a network drive, you might want to take a look at Chronosync. I believe that Carbon Copy Cloner now has this ability as well, but have not tried it.

  • Can't find Time Capsule since upgrading firmware to 7.4.1

    Since recent TC firmware upgrade (7.4.1) both my iMac backups fail very very often, because Time Machine cannot find the backup disks . Same error if you tried to launch Time Machine.
    The light is green, the wi-fi network works, but TC becomes invisible on the finder and on Time Machine preferences too.
    I have to unplugged TC and then switch it on again. It's really annoying.
    Everything worked before the upgrade.
    APPLE FIX IT, PLEASE!

    I have a similar problem since upgrading to 7.4.1.
    I am trying to use my 500 GB Time Capsule to back up both my iMac and a PC (running Windows XP Pro). With the old FW version, this worked fine.
    After upgrading and restarting TC, I can mount a Windows N/W drive and see the Time Capsule. However, after some time the TC is no longer reachable from Windows even though it still is working for Mac backups. Airport Utility from the iMac says that the TC is fine. Restarting the TC causes everything to start working again for a while until it stops working for PC's again.
    TC is not configured to be the router; it is getting its IP address from another router in my network.
    Is there any risk in downgrading back to the previous FW version?

  • How can I be sure that the back up to my time capsule has backed everything up as when I enter time capsule and interogate the back ups i can't identify individual music or picture files?

    How can I confirm that the back up to my time capsule has backed everything up as when I enter time capsule and interrogate the backs ups I can't identify individual photo or music files?

    You cannot browse a Time Machine backup with the Finder. To restore individual music files or any other files normally available in the Finder, open your Music folder then "Enter Time Machine" using the Time Machine icon.
    Restoring individual photographs is slightly more cumbersome. Apple recommends restoring the entire iPhoto Library, but if you want to locate an individual photograph you could use Time Machine to restore the old Libary. Restore it to an alternate location to avoid overwriting your existing one. Open iPhoto while holding an Option key, open the restored Library, find the photo you need and export it, close iPhoto, re-open it with your usual Library, and import the photo.
    Time Machine depends upon a number of sound engineering principles for reliable operation, one of which is "faith"
    Your files will remain intact until your Time Machine backup device becomes inoperative.

  • Using Time Capsule to back up Mac Book Pro and external drive

    we're changing our main computer in the house to our mac book pro, which is not currently backed up, so i'm thinking of buying a time capsule. our current main machine is an old pc with two external hard drives connected....one used as the main file storage location and the second as a back up location. the main large files on these drivers are photo's, videos and scanned documents. can i use the time capsule to back up the mac book with an external hard drive connected to it? i'm thinking of leaving all the photo's, videos, documents, etc. on the external harddrive but want to be able to back it up to the time capsule as well as backing up the mac book pro. can backing up the external hard drive be set up to activate automatically daily as I think the mac book can? thanks

    This is not as simple as it could be..
    Firstly the Mac can read the external drives via the PC if they are shared to the network.. it cannot read them directly plugged into the Mac or the TC.
    Also the TC is not really designed to store files.. it is a location for backups by TM..
    Read some of the stuff Pondini.. our local Time Machine expert.
    http://pondini.org/TM/FAQ.html
    Q3 here is relevant. http://pondini.org/TM/Time_Capsule.html
    The hard drives would have to be plugged directly into the Mac to be backed up and they would have to be reformatted to Mac format. So you would need to offload the files.. format and then load the files back.. no trivial task.

  • My Time Capsule has stopped backing up.  I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

    My Time Capsule has stopped backing up.
    I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
    "The backup was not performed because an error occurred while copying files to the backup disk."
    I have gone into Mac Help and followed this down to stage 4:
    under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily.  Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
    I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ?  How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD.  It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
    Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go.  What is my computer's name?
    Please someone help!  I'm completely stumped.
    Thanks,
    Maggie
    Mac Help says:
    If you back up to a Time Capsule or network disk:
    Open the Time Machine pane of System Preferences, and slide the switch to Off.
    Open Time Machine preferences
    Open Disk Utility, which is in the Utilities folder in the Applications folder. 
    Open Disk Utility
    Make sure the Time Capsule or network disk is turned on and available. 
    Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password. 
    On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes. 
    Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

    Hello,
    Thanks to the great Pondini...
    http://pondini.org/TM/C3.html

  • I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

    I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

    Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
    So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
    The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
    Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
    Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
    Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
    Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
    You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
    Continuing with the instructions on page 12 of the Setup Guide......
    1. Open AirPort Utility on your Mac.  It is located as follows:  Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
    2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
    So, clicking on the WiFi icon will yield a small window that looks like this:
    The example below shows an AirPort Extreme.  You will see Time Capsule on your screen. Click on Time Capsule.
    When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
    3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
    Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
    Base Station Name....Type in a simple name that you want to call the Time Capsule.  Mine is TC, for example.
    Password...................Type in a password that will be used for both the network and the Time Capsule.  Write that down.
    Verify..........................Type in the password again to Verify
    Click Next
    The setup wizard will configure everything for you. When you see the message of Setup  Complete, click Done.
    The Time Capsule is now set up and it will display a green light.

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • I have 2 different MacBooks (owned by 2 people) connected to my Time Capsule. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule?

    I have 2 different MacBooks (owned by 2 people) connected to the same Time Capsule over a wifi network. I want to use the Time Capsule to back up both MacBooks separately from each other. Can one person access the hard drive of the other person, on the same Time Capsule? Is there a way to ensure that the files on the 2 laptops are kept private from each other? Thanks!

    If someone really wants to do something, it won't take them long to find out how to do it. 
    http://pondini.org/TM/17.html
    Security on a Time Capsule is a bit like installing a lock on a tent. It will keep the honest folks out, but probably not the others.

  • I am having trouble using my time capsule to back up. I tried repairing through "first aid" Disk 4s2 failed and I have been directed to erase. What is in this disk? Should I erase it??

    I am having trouble using my time capsule to back up. I tried repairing through "first aid" Disk 4s2 failed and I have been directed to erase. What is in this disk? Should I erase it??

    Only you know what is on the disk.. if you have been running TM to the TC then it will have your backups.. are they important?? Otherwise it will be what you..or others in the house have copied to it.. is that important?
    If the first aid has failed the disk then it could be a good idea to erase it.
    Does the disk mount in finder so you can see the main directory?

  • How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

    I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
    I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
    How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

    James Elliott1 wrote:
    How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
    That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
    There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
    Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

  • How do i use my time capsule to back up another mac?

    How do I set up my time capsule to back up another mac computer?

    If you have one Mac backing up already.. you can just use another.. TM is perfectly happy working with several computer on the same TC.. it will create a sparsebundle for its files.. it is a sort of virtual disk.
    There is nothing you need do except make sure there is enough space.

  • HT201250 Can I use one Time Capsule to back up two iMacs?

    Can I use one Time Capsule to back up two iMacs using Time Machine? Both are running Mountain Lion.
    Fouind the answer in other questions. Don't know how to remove this message. Sorry, Des

    Yes, if you use an application like Genie Timeline Pro, which was designed for this type of purpose.  Genie Timeline will make a complete copy of your Dell on the first backup. After that, it will only backup the changes that have occurred since the last backup.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...

  • How to set up 2 time capsules to back up one computer?

    what can i say, i run a music studio, dj off of mp3's as well, and edit video in my spare time
    so, i've got terrabytes of data, on multiple external and internal hard drives, and have therefore invested in 2 (two) 1tb time capsules. however, there doesn't seem to be an easy way to set them up to both backup my different and various hard drives on one computer! at the moment, i can get both visible on one network, but only one TC at a time will backup, the other just sits there gathering dust as far as i can tell.
    i'm running a mac pro, os 10.5.8, with an 4 disc external drive - 3 disks with various data (one contains video data, one mp3s, and one protools recording data) and one running super duper to make weekly clones of my main hard drive. i'd like to configure one time capsule to backup, say, my hard drive and protools disks, and one time capsule to backup the video and mp3 drives.
    i've searched quite bit on google and here for a solution, but there's a dearth of information on this subject! hasn't anyone else out there done this? surely i'm not the only person out here with loads and loads of critical data in his home needing more than one tb of backup...

    messiah wannabe wrote:
    what can i say, i run a music studio, dj off of mp3's as well, and edit video in my spare time
    so, i've got terrabytes of data, on multiple external and internal hard drives, and have therefore invested in 2 (two) 1tb time capsules. however, there doesn't seem to be an easy way to set them up to both backup my different and various hard drives on one computer!
    That is correct. For backups, the Time Capsule is basically just a dumb HD; the Time Machine software on your Mac is what controls things, and it can only have one destination at a time, whether it's backing-up one or multiple HDs.
    i'm running a mac pro, os 10.5.8, with an 4 disc external drive - 3 disks with various data (one contains video data, one mp3s, and one protools recording data) and one running super duper to make weekly clones of my main hard drive. i'd like to configure one time capsule to backup, say, my hard drive and protools disks, and one time capsule to backup the video and mp3 drives.
    Again, TM won't do that. Only one "instance" of TM will run at a time, and you can only have one set of exclusions (to limit what it backs up) at a time.
    i've searched quite bit on google and here for a solution, but there's a dearth of information on this subject! hasn't anyone else out there done this? surely i'm not the only person out here with loads and loads of critical data in his home needing more than one tb of backup...
    No, but it's fairly rare, and few want to do this wirelessly. And note that Time Machine was not designed for such situations, but as a very simple, "set it and forget it" backup tool for the novice to intermediate user, who's likely never used any backup app at all.
    For a Time Capsule to back up everything (except the clone), about your only option is to forget the TC's internal HD. Instead, get either a single external HD that's 2 or 3 times the space of what you want backed-up, or enough smaller ones that you can make a +Concatenated RAID set+ large enough. Attach this to the TC and back-up to it.
    But for that much data, this is a very slow and cumbersome solution.
    You probably need a mixed solution of some sort; using Time Machine to the Time Capsule for your boot drive and as much of the more volatile data on the other drive(s) as is reasonable; then SuperDuper or another app to back up the other data to an external HD.

  • Can I use my time capsule to back up or save files from my pc?

    My time capsule works great with my 2 Macs.   I just got a PC and would like to know if I can use the time capsule to back up or save files from my PC?

    You can.. but obviously PC is missing TM.. so you will need to use a backup software.
    Saving files to the TC is not really recommended.. but as long as you have lots of space is unlikely to cause problems.. the whole idea of TM though is to keep incremental backups on an hourly basis and will slowly fill the TC.. once space is short.. it can get messy.
    Also read Pondini who is positively against using it for other files.
    http://pondini.org/TM/TCQ3.html
    I suggest you read .. skim at least the FAQ so you actually understand what TM - TC is all about.
    A USB drive plugged into the PC makes a better backup
    1. It is formatted NTFS, ie native format and readable by any windows computer. A TC is a network device.
    2. USB drives are cheap. You can use 2 of them and store one offsite.
    3. USB traffic is not on the network.
    4. Storing files on the TC is bad as it is a backup target not itself backed up.
    5. In a pc you can add drive after drive after drive.. (assuming a desktop since you didn't say laptop). Only a Mac Pro can do that in the Mac world.. internal drives are cheaper than a. USB drives, b. network drives. And they are 10x or more faster.

Maybe you are looking for

  • JDesktopPane & JToolBar

    Hello, I'm trying to put a JToolBar and a JPanel (to represent a status bar) to my JDesktopPane, but it doesn't work. So I tried several solutions : - one time the JToolBar appears but the 2 JInternalFrames don't work perfectly : when you click on th

  • How to Schedule Back Ground job For every 30 Min...

    Hi friends, Please Tell me the steps... How to schedule BACKGROUND Job for every 30 Min. Please Help me ..its urgent. Thanks & Regards, Vasu.

  • Multithreaded Application - How to diagnose

    I ran my multi-threaded application and ended up getting this output. my cpu % shoots up to 95% some time after starting my program. Also, I'd like to know how to debug, diagnose multi-threaded application in general. How to do C like trace and other

  • How can I move photos from photo stream to an Album?

    I want to rearrange photos in my photos into Albums.  Can someone tell me how to move photos from photo stream into Albums?

  • Missing desktop icon in sidebar

    I mistakenly deleted my Desktop icon in the sidebar. How do I get it back?