Cannot find tools;option menu;no firefox logo,etc.

I have no firefox logo;no tools ,option on toolbar. I cannot find my bookmarks and browsing history or controls for same.

Hi Clkster, if you're happy with your screen the way it is now, then there's no need to post a screen shot. If you still have any remaining problems with it, you could describe those if you like.

Similar Messages

Odd Startup behaviour and cannot access tools- options menu

As of this morning my installation of LV8 will not display the normal startup dialog box (allowing you to open existing VIs or open a new one), but simply opens a new VI immediately. If I close this new NI then again instead of returning to the start up dialog it opens a second new (blank) VI.    Furthermore I cannot open the Tools->option menu from within a VI front panel.
I've tried repairing the LV installation and when this didn't work I went for a full remove and reinstall - still no joy!
I've also check that this is not user specific, so that when I log in as a different user on the same PC I get the same behaviour
Help - please !!
Solved!
Go to Solution.

Hi AMHurrel,
This sounds rather strange.
Did you change anything on your setup?
When you say you did a full remove and reinstall, how?
These are the steps I would follow:
The following procedure will remove the National Instrument Software:
1.     Turn off the computer and physically remove or unplug all NI hardware that you have installed on your system.
    This includes anything that is PCI-, ISA-, USB-, 1394-, or ethernet-based.
2.     Turn the computer on and go through Add/Remove Programs (START » SETTINGS » CONTROL PANEL » Add/Remove Programs)
    and remove everything NI-related. Generally, if you can remember, it is best to uninstall things in
    the reverse order in which they were installed. For example, if you installed LabVIEW, then NI-DAQ, and then the
    Internet Developers Toolkit for LabVIEW, you should uninstall the Internet Developers Toolkit first,
    then NI-DAQ, and then LabVIEW last.
3.     After everything has been removed (do not be concerned at this point if an item still shows up in the
    Add/Remove Programs list after you have removed it), close all programs and restart your computer.
4.    Go to START button of your operating system, choose RUN and type "regedit". This will open the Registry
    Editor window. Go to the Registry Menu and choose Export Registry File. Select "All" for the export range,
    and select a file name. This creates a backup of the Registry in case a mistake is made when deleting the keys.
5.     Remove the following registry components from the Windows Registry:
    HKEY_CURRENT_USER\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\Software\National Instruments Delete the entire tree!
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Enum\PCI\ or \ISA and delete registry entries containing any
    keys with 1093 in them.
    Do not worry if any of these trees are not listed. Continue with the remainder of the process .
    Note: You may need to modify security policies. In Windows 2000/98/95/NT, go to [regedt32] then
    Security>>Permissions. In Windows XP you can modify security options using Edit>>Permissions in the
    Registry Editor (regedit).
6.     Close regedit.
7.     Make sure that you do not have any of your own VIs or other files saved in the "C:\VXIpnp",
    "C:\Program Files\National Instruments", or "C:\WINDOWS\nidaq" folders. If you do, copy them to a
    different location. If you are concerned about keeping old virtual channels and your SCXI setup intact,
    then backup the "C:\WINDOWS\niconfig.daq" file, too. Delete all folders and files mentioned above.
    Note: If you have Windows NT/2000, replace "C:\Windows" with "C:\WINNT" in the paths listed above.
8.     Save the attached file msiBlast.zip to your desktop.
    a) Extract the file msiBlast.exe from the zip archive.
    b) Double click on the downloaded msiBlast.exe file to run the executable.
c) Choose the Show NI Installers Only selection.
d) Using (Ctrl+Left Mouse Click) select all National Instruments Software that appears in MSIBlast.
e) Press the Uninstall button. This will uninstall all of the National Instruments MSI Registry entries.
f) Optional:
The Repair option will open the National instruments Installer Program and run the repair option within the installer.
Maintenance Mode will open the Installer Program and allow the user to modify the installation. To open the installer do not enter anything in the Command Line Arg? Dialog box.
9.     Reboot your computer.
10.     You should be ready to install your software. For the cleanest possible install, first install all of your
    application development software, such as LabVIEW, Measurement Studio, etc. Do a custom install, so that you can
    install just the application WITHOUT ANY DRIVERS. Reboot your PC when requested after each install.
    Even if the installer does not tell you to reboot, it would probably be a good idea to do so anyway.
    Now install your driver software and follow the associated user manuals. Some older non Plug-n-Play hardware
    must be installed before the driver. Download the latest versions of the drivers that support your hardware
    from our Drivers and Updates software library (link below), and install them one-by-one, rebooting after each
    install.
11.     Finally, shut down and re-install your hardware. When you boot back up, it should be detected in MAX.
NI Drivers Link : - http://www.ni.com/softlib.nsf
**Attached is msiBlast.
***Do you get an error messages?
Let me know what you think,
Kind Regards
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!

Thanks for the Firefox 4 upgrade. Here is my concern - Previously, the "Check for updates" option is found under the Help menu. In Firefox 4, I cannot find this option; how will we be able to check if there are available updates?

Previously, the "Check for updates" option is found under the Help menu. In Firefox 4, I cannot find this option; how will we be able to check if there are available updates?
Can this new version update itself automatically? How do I set this option?

Why do developers move stuff just to move it?

I cannot find an option for sending a web link directly to my Wallpaper as a 'shortcut'.

I cannot find any option (in the 'File' tab), to send a website link to my wallpaper directly. On IE in the drop down 'File' menu tab, it has an option to 'Send' as an email, OR 'Send' to your desktop as a Shortcut.. Mozilla does not have that option. I do not understand why you do not have that simple option? The Drop down 'File' in Mozilla only allows you to send the link as an email. I always have to copy and paste a link from Mozilla to my IE browser to be able to send a link as a Shortcut to my wall paper.

Upgrade your browser to Firefox 8 and check
* getfirefox.com

I cannot find Tools in ff5

I have downloaded FF ver 5 but the FF icon on my desktop says that it is ver 4 but one of my problems it that if I click on the Firefox tab at the left hand top side of the screen there are NO tools settings to click on to set up for example do not track me etc what is wrong

If you are trying to find Tools > Options, in Firefox 5, click Firefox button, click Options, click Options. 
Also, ALT+T will open the Tools listing.
You can still use/see the Menu Bar (''File, Edit, View, History, Bookmarks, Tools, Help'') if you prefer it:
*'''Temporarily display the Menu Bar''': press the ALT key for the F10 key and make your selections from the temporarily displayed Menu Bar
*'''Toggle between the Menu Bar and Firefox button'''. Do one of the following:
**NOTE:
***Menu Bar '''checked''' = Menu Bar on, Firefox button off
***Menu Bar '''un-checked''' = Menu Bar off, Firefox button on
**keyboard shortcut: HOLD the ALT key while pressing the letters VTM on your keyboard
**Using the Menu Bar: click View > Toolbars, click Menu Bar
**Using the Firefox Button: click Firefox Button > Options, click Menu Bar
**right-click on an empty space in one of the toolbars, click Menu Bar
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

Cannot find an option in Logic to bounce a video with audio.

Hi
I've just finished a college project, where I had to do a soundtrack for film. The problem is that I cannot find an option to export the project as a move file.
I went through bunch of different forums and everyone says 'go to - Options/Movie/Export Audio to Movie'. The problem is, that I don't have such option as 'Movie' under 'Options' section. I have a logic Pro with all the current updates.
Any possible solution? Please help, as I have to hand it in ASAP.
Thanks. Damian

I've just found this: http://support.apple.com/kb/TS3171, so it's solved.

I cannot find an option in iphone4s to lock on GSM (2g) network. Similar option is available in iPhone 4.

I cannot find an option in iphone4s to lock on GSM (2g) network. Similar option is available in iPhone 4.

The chipset in the 4S does not support manually disabling 3G in favor of Edge.

I cannot find a store menu when I am on the "Store" screen on my mobile device. I pre-ordered an album and this menu is not anywhere. Is there even a menu on the mobile version? If so, where do I find it?

I cannot find a store menu when I am on the "Store" screen on my mobile device. I pre-ordered an album and this menu is not anywhere. Is there even a menu on the mobile version? If so, where do I find it?

Seems that you can no longer hide them on your phone. Try doing so in iTunes: http://support.apple.com/kb/HT4919.

MAC OS X 10.9.3 setting up 0365 exchange on mail 7.3, but cannot find the option to adjust how many days worth of mail to store. At the moment it is only synching todays mail. Please assist.

MAC OS X 10.9.3 setting up 0365 exchange on mail 7.3, but cannot find the option to adjust how many days worth of mail to store. At the moment it is only synching todays mail. Please assist.

MAC OS X 10.9.3 setting up 0365 exchange on mail 7.3, but cannot find the option to adjust how many days worth of mail to store. At the moment it is only synching todays mail. Please assist.

How to disable Tools, Options menu in Disc 4i Plus java applet

Discoverer 4i Plus 4.1.37.01.0
I have a single username that will be shared by a group of people pulling reports out of Discoverer 4i Plus web page.
Is there any way to disable the Tools, Options menu in the web java applet so that users can't change the user preferences
in these tabs. I am using a pref.txt file, but any user that changes the user preferences thru above menu changes the setting
for everyone using that username to access the reports. Even when I bounce the prefs and disc processes, the user-changed
values are still there from when that user made the changes in the java applet.
Discoverer Viewer is not an option because the users have to pass in parameters before their query executes (no single
canned reports for everyone in use).
Thanks for any help..
Kate

You can use the BetterTouchTool to reassign the green traffic light pre-Yosemite behavior:
Select "Other" category at the top of the window.
Make sure that "Global" is selected at the left side.
Click "Configure New Trigger" button in the bottom part of the window.
Select "Leftclick Green Window Button" as trigger.
Select "Zoom Window Below Cursor" as predefined action.

Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"

Error Message comes up saying this "Windows Cannot find C:\Program Files\Mozilla Firefox\Firefox.exe"
== This happened ==
Every time Firefox opened
== Since 6/7/2010 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; DS_gamingharbor; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Hello Jignesh.
This issue has been reported before by other users, and it turns out it's the effect of malware. In other words, your system is infected. To scan for malware, install, update and run these programs ''in this order''. They are all free for personal use, but some have limited functionality in their "free mode", but the features you'll miss are not really needed to find and remove the problem you have. Remember that ''not all programs detect the same malware''!
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php malwarebytes.org/mbam.php]
SuperAntispyware - [http://www.superantispyware.com/ superantispyware.com]
AdAware - [http://www.lavasoftusa.com/software/adaware/ lavasoftusa.com/software/adaware]
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html safer-networking.org/en/index.html]
Windows Defender - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx microsoft.com/windows/products/winfamily/defender/default.mspx]
Dr. Web Cureit - [http://www.freedrweb.com/cureit/ freedrweb.com/cureit]
If these don't find it or can't clear it, please tell me and I'll provide you with further assistance.

I CANNOT FIND THE OPTION "PROFILE" UNDER GENERAL SETTINGS IN MY IPHONE 4 VERSION 4.2.1

I CANNOT FIND THE OPTION "PROFILE" UNDER GENERAL SETTINGS IN MY IPHONE 4 VERSION 4.2.1

So, when in doubt, check out the manual (this one is for 4.2 and 4.3: http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf).
This is what I found under the General / Settings section. Not super helpful!
Profiles
This setting appears if you install one or more profiles
So I guess my question is, did you already set up the profile somewhere?? I searched through the manual and didn't see anything super helpful, but since you know specifically what you're looking for, maybe you'll find something I missed.

How do I remove "Scan with ClamXav" in Lion? I cannot find a contextual menu item folder in at home/library.

How do I remove "Scan with ClamXav" in Lion? I cannot find a contextual menu item folder in at home/library. I installed and removed ClamXav from the Mac app store.
Thanks.

ToBeHuman wrote:
Thanks! AppTrap mentioned in the linked article got rid of it for me.
Actually, it didn't. With Snow Leopard and Lion, the contextual menu is provided by a built in "service" within the ClamXav application itself.
If you downloaded ClamXav from the AppStore, all you need to do is trash it and reboot.
If you downloaded the full version from the web you need to first run the "ClamAV Engine REMOVER" script that comes on the ClamXav_2.x.x.dmg. Then trash the ClamXav application, empty the trash and reboot.
There are also one or two preferences that can be found in ~/Library/Preferences/ that start with "uk.co.markallen.clamxav..." that take up minimal space and don't do anything without the application. AppTrap probably found those.

Using ios 6 beta 4 but i cannot find the option to upgrade to the official release!

IM using ios 6 beta 4. But i cannot find the option to get the oficial release verision on itunes or via OTA! Any solutions!? THank you!

There might be a better solution found for that at the developer support site

How do I send my photos to iCloud on my iPhone 3, which has the latest upgrade. I cannot find the option.

How do I send my photos on my iPhone 3, which has the latest upgrade, to iCloud? I cannot find an option.

You can only view your photo stream photos from a device or computer that is signed into your account with photo stream enabled, not from icloud.com. If you backed up your phone, the camera roll photos on your phone would be included in the backup, but cannot be seen unless you restore the backup to your phone.
However, you shouldn't try to use iCloud to back up your photos. Photo stream photos only remain in iCoud for 30 days. And if you back up yoru phone to iCloud, then delete your photos, you next backup will overwrite the backup that contains the photos you deleted and they would be lost.
To back up your photos, import them to your computer using your usb cable as explained here: http://support.apple.com/kb/HT4083.

Cannot find tools;option menu;no firefox logo,etc.

Similar Messages

Maybe you are looking for