Cannot find transfer rules!!!
Hi,
I have to delete an InfoObject which is no longer required.
when I right click and hit delete I get an error message that the IO is being used in a Transfer Rules.
I have searched for that transfer rule but can't locate it.
Is there any way to know where this transfer rules is?
Thanks
NEWBW
I Got the following message when I looked for it in the Metadata Repository. Please help me proceed.
InfoSource ZZXXXX (Master Data) is not known
Message no. RSAR208
Diagnosis
The InfoSource is not known.
System response
The transfer rule maintenance cannot be called.
Procedure
If this concerns an InfoObject for the InfoSource, check whether an application component is assigned to the InfoObject. If not, assign an application component to the InfoObject.
Similar Messages
-
Unable to find Transfer Rules and Data Source for 0PERSON Info Source
Hi,
I'am working on SALES ANALYSIS Configuration with the help of SAP Best Practices.
I'am trying to load Master Data Attributes/Texts/Hierarchies.
I'am able to load for allmost all the InfoPackages which i created for particular DataSource.
Now i need to load master data for 0PERSON InfoObject under that Person (Attributes) and Person (texts) are there,for this 2 Transfer Rules and the DataSource has to be defined by default as it is defined for other Attributes/Texts/Hierarchies.But i'am unable to find a DataSource and Transfer Rules to create a infopackage for PERSON Attributes and Texts.
Please gudie me with a solution in order to get these Transfer Rules and DataSource for this Attributes and Texts.
With regards,
Pradeep.BHi,
Install the corresponding master data objects from Business content. Go to data source find out the needed datasource, replicate it. If you want you can migrate it also.
If still you are not getting 0person masterdata object datasource & transformation structure, then you have to create the transformation, Infopackage.
Hope if you will install the business content again, it will solve your problem. -
Cannot See Transfer Rules in Transport Connection
Hello,
I have searched Notes and Forums and have not found a solution for this!
I performed some configuration in our newly upgraded BI system. We
were on BW 3.5 and upgraded to BI 7.0
We also change how our landscape was interconnected.
Our BW Dev system used to connect to our R3 Sandbox system.
Now our BIDev system connects to our ECC Dev system.
This is the first project i have worked on since the upgrade was
successful. What I am finding is that I get the following transport
error when I look at the STMS logs from BID to BIQ.
Transport Error
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 1_CO_PA2900010_DS_BA not available.
No activation possible.
Here are the details when I click to get more info on the error message:
Reference to transfer structure 1_CO_PA2900010_DS_BA not available. No
activation possible.
Message no. RSAR436
Diagnosis
Transfer structure 1_CO_PA2900010_DS_BA should be transported into this
system.
However, no DataSource mapping refers to this transfer structure.
System Response
The transfer structure was not activated or deleted.
Procedure
Ensure that DataSource mapping, with a reference to the transfer
structure 1_CO_PA2900010_DS_BA is on the same transport request. Use
the transport connection to create a consistent request.
Wierd Behavior
The big issue now is that when i go to the transport connection in RSA1
and I want to collect Transfer Rules, I see a small subset of all the
transfer rules I would expect to see. I am looking specifically for
the transfer rules: 1_CO_PA2900010_DS PCDEVC200
Similiar behavior occurs when i am looking for "3.x DataSources" in the
transport connection
I can see these rules in other areas of RSA1 such as Infosources.
Please assist with finding these transfer rules in the Transport
connection.
Other then this transport both ECC and BI system landscapes are up and running normally.
Please help
Thanks!
NickBryan,
Thanks for jumping onto this thread. I am going to complete the transports and see if i have any system name conversion issues to address. I may need some guidance on ensuring that BID, BIQ and BIP have the correct entries in RLOGSYSMAP.
To answer your questions:
1. Was the new source system added as an additional source system or was the R/3 Sandbox source system renamed?
Bryan: The new source system was added by renaming the R/3 Sandbox source system/Executing BDLS. The original source system was PCSNDC200, and we BDLS'd that to PCDEVC200.
2. To what Source system do the transfer Rules belong to that you are missing?
---Bryan: The missing transfer rules (and all source system dependent objects that are missing) belong to PCDEVC200...I fixed the missing object issue, by going to "transport Connection" and clicking on 'Source System Assignment' (or Shift+F7) and then checking the box for my source system, in my case the box for PCDEVC200 was not checked previously.
3. Was the "conversion of Logical System Name" entries updated correctly after the new source system was added in BID?
---Bryan: The answer to this question i will find out tomorrow when I transport to Production (fingers crossed, the BID > BIQ transport went well with name conversion!)
Thanks!
Nick
Edited by: Nick Bertz on Dec 21, 2009 3:11 PM -
Cannot transport transfer rules!
Hi,
We have a problem transporting the transfer rules from BWD to BWQ.
Here are the steps I did :
New object ZZRANK was added to user exit on R/3 dev. and transported
New infor object ZZRANK was created in BWD
ZZRANK was added as attribute to 0PLANT (mater data)
Transfers were created and comm struc updated.,
testing was successful in Dev, r3 changes were transported to Q and BWD transports to BWQ. ALL info objects transported successfull but the transfer rules failed. Cannot determine why.,
Start of the after-import method for object type R3TR ISMP (Activation Mode)
Mapping between data source 0PLANT_ATTR and source system PR2200LS is inconsistent
Field ZZRANK will not be delivered from DataSource 0PLANT_ATTR in source system PR2200LS
Mapping between data source 0PLANT_TEXT and source system PR2200LS is inconsistent
Field KEY1 will not be delivered from DataSource 0PLANT_TEXT in source system PR2200LS
Errors occurred during post-handling RS_AFTER_IMPORT for ISMP L
The errors affect the following components:
BW-WHM (Warehouse Management)
Any help is appreciated.You may have to replicate your data source on BWQ.
First replicate and then send your transport again from BWD to BWQ.
Regards.
Sanjay
Message was edited by:
Sanjay Sinha -
Hello,
I activated the datasource 0UC_MTR_DOC in the source system and replicated the same into BI. But in BI the datasource shows as inactive. Then I went to the Tcode rsds and activated the datasource.
And then I activated the Business content infosource, 0UC_MTR_DOC, and then when trying to create a transfer rules to link the infosource and datasource, the system does not give me an option of 0UC_MTR_DOC, as the datasource. Why is this happening? I am confused. I tried creating a transformation, but even then I get the message that 'Transfornmation does not exist'.
Please help. Points will be awarded to helpful answers.
Regards,
PrinceHi Prince,
If you want to replicate it as 3.x, you just go to RSA1 - DataSources and delete the datasource. Then, replicate it again, and when you are prompted for the Datasource type selection, select 3.x. Then, you should be able to activate Business Content and connect.
Then, you migrate the Update rules, InfoSource, Transfer rules and Datasource.
Hope this helps.
Regards,
Diego -
Cannot find Business Rule Composer!
Hi All,
I was able to install Biztalk Server 2006 R2 successfully on Vista. But I am unable to see 'Business Rule Composer (BRC)' when I follow the below steps:
Start >> All Programs >> Microsoft Biztalk Server 2006 >> (Business Rule Composer)....not able to find this!!!
I even checked in Biztalk server 2006 configuration window and can see all the components (alongwith BRC) with green check mark. Please help me on how & from where to open it. Thanks in advance.
Nitya.Hurraaaayyyyyy!!!!! Its done now.
Ben Cline:
I checked for the exe within the path you specified but I did not find it.
Kent Weare:
I have checked in SQL Server for "BiztalkRuleEngineDb", it was already there, configured.
Richard C S:
When I tried to modify the installation, I found that the Business Rule Composer(BRC) checkbox was unselected. I selected that box and proceeded further, It was all installed properly.
Many thanks to you all for your valuable inputs. Microsoft forum simply ROCKS!!! :-)
A question to you all, if I missed selecting BRC during my initial installation, then how come it was showing as configured in Biztalk server 2006 configuration window and also the "BiztalkRuleEngineDb" in Sql server???
Nitya. -
Changing transfer method in transfer rules
I would like to change the transfer method in a TR.
It is set by default to IDoc.
I would like to set it to TRFC with PSA.
However, I can't because it is dimmed.
My aim is to find a workaround to an issue stated in SAP note 120446.
Thxs.
LauQ.It is a Data Mart source in the same BW system.
I have created an Export DataSource from a PSA.
I cannot activate transfer rules due to a bug (note 120446).
This occurs because the transfer method is IDoc only.
I'm afraid that no solution exist for my problem.
Thxs.
LauQ -
Why no transfer rules in our BI system
Hi.experts:
I have a BI system,and the patch level is BI_CONT 703 patch 8..and My SAP BW version is SAP_BW 700 patch 0018.I found that no transfer rules for 3.X datasource and 3.X infosource.
Any body has the same situation?
Best Regards
Martin XieHi,
Not sure if this helps.
Check in BI Content tab --> Source system assignment button. Flag the source system for which you are installing the transfer rules. Then you will get transfer rules for the source sytem.
If nothing is flagged in the source system assignment, you can find transfer rules for all the systems.
Regards,
Murali. -
Not able to find the infosource and transfer rules in the infosource tab
Hi everyone,
Not able to find the infosource and transfer rules in the infosource tab in Modelling. I was able to see that the infosource is available under nodesnot connected in the transport connection tab. But i cannot see the same in infosource tab. Please advise.I have searched with technical name, I am not able to find it, but when i double click on the datasource .....the transfer rules pop up. Because I have not transported the application component, I am not able to find it. But even though it should be available on the nodesnotconnected, I still cannot see it. Is there a work around this ?
I have also tried rsa1old, it still could not find.
Thanks for your quick response -
I am trying to transfer files from my MacBook Pro (using Mac OSX 10.6.8) to MacBook Air (Mac OSX 10.7.4) using Migration Assist via WiFi connection. The two macs cannot find each other. any suggestions
Try this article - http://support.apple.com/kb/HT4889.
If it doesn't help, post back in this thread.
Best of luck,
Clinton -
Unable to find the Transfer Rules in Transport Connection
Hi Guys,
I am on BW 3.5.
I am unable to find the Transfer Rules created in transport Connection. I need to Transport these changes. I was able to Transport Communication structure and the Infosource.
I tried activating the Transfer Rules and also replicated the datasources but it does'nt prompt me for a Transport request.
Hence I need to explicitly Transport by going into Transport Connection where I am unable to find the object.
Please help me on how to include this object in the Transport request created.
Thanks in advance.
Regards,
TysonAnother way is to go the transfer rules or update rules or any object which you want to transport->extras on top>Object direct entry>change the package from $temp>rest you know
Cheers,
shana
Assigning pts is the way of saying thanks in SDN -
How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use
Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward -
How to find the existing START ROUTINEs in Transfer Rules in whole system ?
Hi all,
How to find the existing Start Routines in Transfer Rules in BW System, please ?
I know that we could find from the Transfer Rules.
Is there any way to find instead of looking at Transfer Rules for <b>each</b> InfoSource?
Thanks,
Venkat.Hi Venkat
You can find it in these tables
RSTRAN
RSUPDROUT
RSAROUT
RSAABAP
RSAABAPINV
Thanks
Tripple k -
Find break-points source code (update rules, transfer rules)
Hi all,
Is there any effective and efficient way to find (active) break-points in source code, more specfic update rules, transfer rules or other objects where custom code is implemented? Or in other words look for strings in source code or programs.
I looked and searched everywhere but could not find any answer.
RSRSCAN1 (does not work)
RPR_ABAP_SOURCE_SCAN (does not exist)
We are on SAP BW 3.5 with SAP Basis 640.
Thanks all.Hi,
Try this
1) if you're checking any program from SE38 ..goto Utilities -> find in the source code-> give breakpoint and search.
2) else. load data , Goto details tab in the monitor and right click on any of the data packages.
Simulate update -> choose transfer rules or update rules for debuging.-> It will take you debuging screen. -> Create a watch point with key word "break-point" and execute (F8).
It will go and stop where there is "break-point" -
I-Tunes cannot transfer all items/cannot find file(!)
When I try to transfer my Library and Playlists to my new I-Pod it tells me that it cannot find some files. I get in the left column of my I-Tunes page.
I am not on my home computer but I will try it when I get home. I added a Western Digital hard drive for extra storage on my Dell. I think that there is data on both hard drives. Thanks for your help. Hopefully I can figure out how to sign in from home and I will update you.
Maybe you are looking for
-
How to (make best) use external js library from html object (need help from dev)
Ok, on another discussion about rotating full screen backgrounds slideshows, i was orientated to try a small lib named "backstrech" I throw myself in, and i really like what we can do with it. To use it simply, just make an html object and paste this
-
T60 2007-FUG ATI X1400 Windows 7 64-bit projector and external display problem
I have Windows 7 64-bit Enterprise on my T60. I have tried to install many different ati drivers, but nothing seems to work. I cant use a projector or external display via VGA port. I heard that if I boot with a projector then it works ok. I have ins
-
FTP adapter features..
Hi all, We have a requirement during FTP processing...Is it possible to define a TMP directory and a WORK directory like in most FTP tools..We need to keep a file in a TMP directory for a certain time and then move it into the WORK directory upon whi
-
After time change, airport "out of range"
Since my 12" powerbook underwent the daylight savings time change, its connection with my airport extreme is failing. It will establish a connection but will drop the connection after a few minutes and report that the airport is out of range (though
-
How can I get the current user an resource context in a portal JSPDynPag
How can I get the current user (com.sapportals.portal.security.usermanagement.IUser?)an the resource context in a portal component (JSPDynPage)? Thanks.