Cannot find warranty information for T500 - 2081 RR1

Hello,
I've bought a Lenovo T500 laptop last month.
I am trying to find all the warranty information and status, but I seem to me unable.
The type is 2081 RR1. (There is no RR1 anywhere on this site)
I think I've sent a letter to the support two weeks ago, and there is no reponse.
Why is not 2081-RR1 listed?
Any help appreciated,
Thanks,
Sincerely,
Anatoliy Kim

Hi anatolekim,
Welcome to Lenovo Forum!
To check the warranty availability, please access Lenovo Warranty Lookup page. Key in your Type 2081 and your serial number. RR1 is not needed unless you are looking for drivers, then you may need it.
Hope this helps.
Cheers,
Cleo
WW Social Media
T61, T410, x240, Z500, Flex 14
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
How to send a private message? --> Check out this article.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

I cannot find my receipt for my ipod how can i prove it isnt a year old

I cannot find my receipt for my ipod and its under a year old how can i prove this

Hi cantfindanything,
I am gathering you are trying to get an iPod repaired by Apple.
In the US for iPod Touch Generation 5:
Every iPod comes with a one-year limited warranty and 90 days of complimentary telephone technical support.
If you are trying to get a replacement or repair job, Apple will just need your Serial Number, found on either the back of your iPod Touch or in: Settings, General, About, Serial Number.
When Apple receives this number, their database will be able to show up your information including device purchase and activation.
To get a repair job/replacement, it is best to talk to Apple on the phone or go to your nearest Apple store to find out possible resolutions.
To contact Apple call:
1-800-MY-APPLE
You can also take the iPod into your closest Apple Store and give them your serial number and they will be able to help you: http://www.apple.com/retail/storelist/
Many Thanks for your question and Happy New Year!
iBenjamin Crowley

Cannot find any information on property 'isbn' in a bean of type '

hi all,
i am doing my course work and i have been stuck with this error for the past 2 days. wonering if anyone can help?
i have use this in my jsp page.
<jsp:useBean id="validateBean"
scope="request"
class="edu.rmit.isys2049.validation.BookValidationBean" />
<jsp:setProperty name="validateBean" property="publisherId" />
<jsp:setProperty name="validateBean" property="isbn" />
<jsp:setProperty name="validateBean" property="title" />
<jsp:setProperty name="validateBean" property="author" />
under the BookValidateBean.java i had define the setter and getter for isbn
public void setISBN(String isbn)
this.isbn = isbn;
public String getISBN() {
return isbn;
but still i got this error, where have i went wrong??
error message
Message: Cannot find any information on property 'isbn' in a bean of type '

Cannot find any information on property 'firstname' in a bean of type
since in the bean i use
private String firstname
and
getFirstname
setFirstname
also i am using eclipse
still i get this error
can u suggest somthing
basically i want firstname back to same textbox if the page is reload by some means.
waiting for ur reply

Cannot find any information on property 'Name' in a bean of type 'UserBean'

Hello,
I was trying to solve this problem myself but never got through, its really routine. So please can you see this error message, html file, jsp file and say if there are mistakes or if I need to add something else somewhere?
Error
org.apache.jasper.JasperException: Cannot find any information on property 'Name' in a bean of type 'UserBean'
HTML
<html>
<head>
<title>jsp test</title>
</head>
<body bgcolor ="white">
<form action ="course.jsp" method ="post">
<table>
<tr><td>userName:</td>
<td><input type="text" name ="Name">
</td>
</tr>
<tr>
<td>userID:</td>
<td><input type ="text" name ="ID"></td>
</tr>
<tr>
<td>userAddress</td>
<td><textarea name ="Description"></textarea></td>
</tr>
<tr>
<td><input type ="submit" name ="submit"></td>
</table>
</form>
</body>
</html>
JSP
<%@ page language="java" contentType="text/html" %>
<html>
<body bgcolor="white">
<jsp:useBean id="courseBean" class="UserBean">
<jsp:setProperty name="courseBean" property="*" />
</jsp:useBean>
The following was done:
<jsp:getProperty name="courseBean" property="Name" />
<jsp:getProperty name="courseBean" property="ID" />
<jsp:getProperty name="courseBean" property="Description" />
</body>
</html>
JAVABEAN:
public class UserBean implements Serializable{
private String Name;
private String ID;
private String Description;
public UserBean(){
public void setName(String Name){
this.Name=Name;
public String getName(){
return ID;
public void seID(int userID){
this.ID=ID;
public int getUserID(){
return ID;
public void setDescription(String Description){
this.Description=Description;
public String getDescription(){
return Description;
Thank you in advance
Ajlear

Use a lower case initial on a bean property name.
Instead of:
<jsp:getProperty name="courseBean" property="Name" />try:
<jsp:getProperty name="courseBean" property="name" />The same will apply to other properties. Also, make sure you use the lower case initial on form field names. e.g. <input type="text" name ="name"> for use in <jsp:setProperty name="courseBean" property="*" />

I get a message of "Could not find installation information for this machine." after trying to Reinstall Mac OS X.

I would like to repartition the Main HD to two Partitions but could not do so and keep on getting an error message of "Could not unmount disc.." so I tried choosing the "Macintosh HD" partition and tried Partitioning it but the option is not available. So to my frustration I tried clicking on "Erase" to see whether doing so would allow me to finally partition my HD but still can't. And now since I erased my Macintosh HD partition I could no longer boot to Lion.
Before doing the above steps I downloaded the Lion Recovery Disc Assistant and created an external Recovery HD using an 8GB flash drive. I used this as startup destination by choosing it as boot destination from pressing Option before startup. I tried using Mac OS X Utilities to Reinstall Mac OS X from the external drive but I only get "Could not find installation information for this machine." message. I also tried booting from the Recovery HD partition on the HD but i also get the same message.
I have a new iMac that came with OS X Lion 10.7.
Anybody have idea how to fix this?

Partitioning on-the-fly may fail if the disk is too fragmented. You cannot run Erase for the internal disk as it contains its system components. The same if trying to run Boot Camp in order to create the Windows partition, it may fail if disk is too fragmented.
If I correctly understand what you want, then you must boot from an external disk, therefore copy Lion to a 4 GB (or higher) flash drive, run the installer, and then choose the option to partition the disk, this is done after rebooting into the installer from the external drive. You cannot do that if the Lion installer is on the internal drive as it cannot erase or repartition itself.
If this fails (did you try this?), then perhaps you can try to create a Lion boot flash or DVD by using a non-Apple app called Lion DiskMaker, when ready restart, after chime press option / alt key, then choose to boot from this newly created boot disk or flash drive. This reportedly works OK (tried with an older version of Lion, not recently, was OK). It is better to work with a flash drive, Lion is not optimized to run from optical media.
WARNING: disregarding the method, you MUST always back up your data when repartitioning or installing / reinstalling.
Hope this helps to solve you issue. Before any attempt, backup, backup, backup.

Cannot find a report for SQL Server monitoring

We installed a SCOM 2012 environment recently and imported the SQL Server Management packs successfully. SQL Servers are being monitored.
However, in the reporting section, i cannot find a group for SQL Server Reporting. All other show up ( Active Directory, Appication Monitoring, Web monitoring, etc) Just none for the SQL Reporting.
Please help

Hi,
I assume that you miss some SQL management packs, would you please re-download the management pack here and import it:
https://www.microsoft.com/en-hk/download/details.aspx?id=10631
After successful importing, you should see it under reporting workspace:
If you still cannot see it, please check operation manager event logs for more information to help to troubleshoot this issue.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Cannot find any information on property in a bean of type mypackage??

Hi
I got an error org.apache.jasper.JasperException: Cannot find any information on property in a bean of type mypackage. I tried to find the solution and found that I need to use the naming convention so I fixed it. But I still got that error. Please help me.
Here's my Jsp file.
<%@ taglib prefix="fm" uri="/WEB-INF/matcher.tld"%>
<%@page contentType="text/html" pageEncoding="UTF-8"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<jsp:useBean id="obj" scope="session" class="com.webIndex.match.Matcher"/>
<html>
    <head>
        <meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
        <link href="wixIndex.css" rel="stylesheet" type="text/css">
        <title>Web Index</title>
    </head>
     <body>
          <%@ include file="header.html" %>
             <jsp:setProperty name="obj" property="*" />
         <h4>WIX files for your search
              "<jsp:getProperty name="obj" property="keyword"/>"
         </h4>
         <h4> and
              "<jsp:getProperty name="obj" property="kwinfo"/>":
         </h4>
         <br>
          ${fm:Matcher(obj, obj.keyword, obj.kwinfo)}
     </body>
</html>And here's my first java program.
public class Matcher {
     public static String match(FindMatch object,
            String keyword, String kwinfo) {
        return object.exact_match(keyword, kwinfo);
         //return keyword;
}And here's my second Java program.
public class FindMatch {
     private String keyword;
     private String kwinfo;
     static String refile;
     public FindMatch() {
        keyword = "";
        kwinfo = "";
     public String getKeyword() {
        return keyword;
     public void setKeyword(String keyword) {
        this.keyword = keyword;
     public String getKwinfo(){
          return kwinfo;
     public void setKwinfo(String kwinfo){
          this.kwinfo = kwinfo;
    public String exact_match(String keyword, String kwinfo) {
    //     do something here
     return refile.toString();
}And here's my tld:
<?xml version="1.0" encoding="UTF-8" ?>
<taglib xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee web-jsptaglibrary_2_0.xsd"
    version="2.0">
    <tlib-version>1.0</tlib-version>
    <short-name>fm</short-name>
    <uri>http://com.webIndex.match.Matcher.tld</uri>
    <function>
        <name>Matcher</name>
        <function-class>
            com.webIndex.match.Matcher
        </function-class>
        <function-signature>
            java.lang.String match(
                com.webIndex.match.FindMatch,
                java.lang.String, java.lang.String)
        </function-signature>
    </function>
</taglib>Thanks!!

Ok, I 've changed the name of useBean id to 'matcher' and replace every 'obj' with 'matcher'
But I still got the error.
And so when I tried to do what you said. I got this error.
org.apache.jasper.JasperException: An exception occurred processing JSP page /search_result.jsp at line 27
24:
25:           <jsp:setProperty name="matcher" property="*" />
26:
27:           <h4>WIX files for your search ${matcher.keyword}</h4>
28:           <h4>and ${matcher.kwinfo}</h4>
And actually, my exact_match is not just like that. But I thought that the problem is not concerned with my problem and it's just concerned with jsp, so i skipped it. Here's the actual progam., i mean exact_match() and I skipped other parts coz it said that my post exceeds maximum allowed words.
package com.webIndex.match;
public class FindMatch {
     private String keyword;
     private String kwinfo;
     static String refile;
     public FindMatch() {
     public String getKeyword() {
        return keyword;
     public void setKeyword(String keyword) {
        this.keyword = keyword;
     public String getKwinfo(){
          return kwinfo;
     public void setKwinfo(String kwinfo){
          this.kwinfo = kwinfo;
       public String exact_match(String keyword, String kwinfo) {
    //     String loctest="";
     //     loctest = getClass().getResourceAsStream("/resources/wixIndex.xml").toString();
         String fname ="";
         String allentries="";
         keyword = upperCase(keyword);
              try{
                   //String location = directory.getCanonicalPath();
                   //File indexfile = new File(xmlLocation + "wixIndex.xml");
                   //ServletContext application = getServletConfig().getServletContext();
                   //InputStream indexfile = getClass().getResourceAsStream("/resources/wixIndex.xml");
                   //InputStream namefile = getClass().getResourceAsStream("/resources/indexList.xml");
                   File indexfile = new File ("D:\\Documents and Settings\\May\\workspace\\WixFinder\\WebContent\\WEB-INF\\classes\\resources\\wixIndex.xml");
                  File namefile = new File ("D:\\Documents and Settings\\May\\workspace\\WixFinder\\WebContent\\WEB-INF\\classes\\resources\\indexList.xml");
                      DocumentBuilderFactory domFactory = DocumentBuilderFactory.newInstance();
                   domFactory.setNamespaceAware(true);
                   DocumentBuilder builder = domFactory.newDocumentBuilder();
                   Document doc = builder.parse(indexfile);
                   XPathFactory factory = XPathFactory.newInstance();
                   XPath xpath = factory.newXPath();
                   XPathExpression expr = xpath.compile("//entry//index[keyword='"+keyword+"']" +
                             "//file[not(preceding::file[parent::index[keyword='"+keyword+"']] = .)]");
                   xpath.compile("//file//entry[page='"+input+"']" +
                        "//color[not(preceding::color[parent::entry[page='"+input+"']] = .)]");
                   Object result = expr.evaluate(doc, XPathConstants.NODESET);
                   NodeList nodes = (NodeList) result;
                   refile="";
                   //InputStream namefile = getClass().getResourceAsStream("/resources/indexList.xml");
                   for (int i = 0; i < nodes.getLength(); i++) {
                        fname = nodes.item(i).getTextContent();
                        doc = builder.parse(namefile);
                        expr = xpath.compile("//wixfile//index[file='"+fname+"']//name//text()");
                        result = expr.evaluate(doc, XPathConstants.NODESET);
                        NodeList nodefile = (NodeList)result;
                        //showing the file name <desc - name> tag
                        for (int j=0; j< nodefile.getLength(); j++){
                             refile = refile + "<br>" ;
                             refile = refile + nodefile.item(j).getTextContent();
                        //call method to show link
                        String linktodoc = showLink(fname, keyword);
                        //String prvalue = getPageRank(linktodoc);
                        //int rankvalue = Integer.parseInt(prvalue);
                        //PageRankService pgrank = new PageRankService();
                        //int rankvalue = pgrank.getPR(linktodoc);
                        if (rankvalue != -1){
                             refile = refile + "<br>" + "<a href='" + linktodoc + "'>" + linktodoc + "</a>" +
                                  "<br>[Pagerank -" + rankvalue + "]";
                        else{
                             refile = refile + "<br>" + "<a href='" + linktodoc + "'>" + linktodoc + "</a>" +
                             "<br>[Pagerank -" + prvalue + "]";
                        //refile = refile + "<br>" + "<a href='" + linktodoc + "'>" + linktodoc + "</a>";
                        refile = refile + "<br>" + linktodoc;
                        allentries = showentries(fname);
                        refile = refile + "Some other keywords from same wix file:" + "<br>" + allentries;
                        //refile = refile + "<input type='"submit"' value='"BOOKMARK!!"' class='"button"'/>"
                        String attach = "<table>" + "<tr bgcolor='#FFCCFF'>" + "<td>" +
                             "<a STYLE='" + "text-decoration:none'" +
                                  "href='" + "attach.jsp" + "'>" +
                             "<strong>" + "Attach This" + "</strong>" + "</a>" +
                             "</td>" + "</tr>" + "</table>";
                        refile = refile + "<br>" + attach;
              }catch(Exception e){return e.toString();}
         if (refile != ""){
              refile = refile.substring(4, refile.length());
             return refile.toString();
         else
              return "<h4>No such exact match!</h4>";
}And actually, my program totally worked fines when I pass only 'keyword' and the error occurs after I add 'kwinfo' to it.
Thanks.

Cannot find PDL type for output device '(Printer name)'

Hi,
After seeing the statutory reports (PF, ESI etc) in standard format, we try to print form. We get the below error:
Cannot find PDL type for output device '(Printer name)'
Message no. FPRUNX113
Diagnosis
No PDL type has been found for the specified output device.
System Response
Error message
Procedure
Contact your system administrator.
Procedure for System Administration
For more information, see SAP Note 685571.
Any input will be off great help...
Regards
Pooja

Hello
It looks like that you had not installed the ADS(Adobe Document server) for the PDF type reports. Please check with your basis team if you want to configure ADS.
If you need the output as a sapscript then please do the sollowing steps:
(1) Execute transaction SM30
(2) Enter 'Table/View' as V_T5F99OCFT
(3) Select 'Maintain' option.
(4) Select 'New Entries' option from the Application Too
(5) Enter following entries:
     Logical Form Name    = HR_IN_EPF12A_99M
     Form Variant         = (Leave this field blank)
     End Date             = 31.12.9999
     Start Date           = 01.01.1990
     Form Type            = SAP Script (SSC)
     Def. Type            = (This field should be checke
     PDF Form Name        = HR_IN_EPF12A_99M
     SAP Script Form Name = HR_IN_EPF12A_99M
     Smart Form Name      = (Leave this field blank)
(6) Save the entries
The above example I have given you is only for the form 12A.
You have to make entries for all the reports sapscript in this table.
Please goto SE71 -> F4 -> Payroll -> Payroll India here you will find
all the sapscripts you require.
Regards
Ramana

Cannot find CFML template for custom tag

Why am I getting this error when my code looks like this?
Cannot find CFML template for custom tag UPSPrice.
ColdFusion attempted looking in the tree of installed custom tags but did not find a custom tag with this name. If you are using per-applica
<Cfif NOT form.shipzip IS "">
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.shipzip#" WEIGHT="#getshipweight.totwei#">
<cfelse>
<CF_UPSPrice SERVICE="#form.upsshiptype#" FROM="#shopshipzip#" TO="#FORM.zip#" WEIGHT="#getshipweight.totwei#">
</cfif>

UPSPrice.cfm file:


<CFSET proceed = "Yes">
<CFSET error_message = "">

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.service")>
<CFSET product = ATTRIBUTES.service>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "SERVICE must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.to")>
<CFSET destPostal = ATTRIBUTES.to>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "TO postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.from")>
<CFSET origPostal = ATTRIBUTES.from>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "FROM postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>
<CFIF IsDefined("ATTRIBUTES.weight")>
<CFSET weight = ATTRIBUTES.weight>
<CFELSE>
<CFSET proceed = "No">
<CFSET error_message = "WEIGHT postal code must be specified!">
</CFIF>
</CFIF>

<CFIF proceed>

<CFSET destCountry = "US">
<CFIF IsDefined("ATTRIBUTES.tocountry")>
<CFSET destCountry = ATTRIBUTES.tocountry>
</CFIF>

<CFSET oversized = "0">
<CFIF IsDefined("ATTRIBUTES.oversized")>
<CFIF ATTRIBUTES.oversized>
   <CFSET oversized = "1">
</CFIF>
</CFIF>

<CFSET cod = "0">
<CFIF IsDefined("ATTRIBUTES.cod")>
<CFIF ATTRIBUTES.cod>
   <CFSET cod = "1">
</CFIF>
</CFIF>

<CFSET hazard = "0">
<CFIF IsDefined("ATTRIBUTES.hazard")>
<CFIF ATTRIBUTES.hazard>
   <CFSET hazard = "1">
</CFIF>
</CFIF>

<CFSET handling = "0">
<CFIF IsDefined("ATTRIBUTES.handling")>
<CFIF ATTRIBUTES.handling>
   <CFSET handling = "1">
</CFIF>
</CFIF>

<CFSET calltag = "0">
<CFIF IsDefined("ATTRIBUTES.calltag")>
<CFIF ATTRIBUTES.calltag IS "BASIC">
   <CFSET calltag = "1">
<CFELSEIF ATTRIBUTES.calltag IS "ELECTRONIC">
   <CFSET calltag = "2">
</CFIF>
</CFIF>

<CFSET saturdaydelivery = "0">
<CFIF IsDefined("ATTRIBUTES.satdeliv")>
<CFIF ATTRIBUTES.satdeliv>
   <CFSET saturdaydelivery = "1">
</CFIF>
</CFIF>

<CFSET saturdaypickup = "0">
<CFIF IsDefined("ATTRIBUTES.satpickup")>
<CFIF ATTRIBUTES.satpickup>
   <CFSET saturdaypickup = "1">
</CFIF>
</CFIF>

<CFSET response = "0">
<CFIF IsDefined("ATTRIBUTES.response")>
<CFIF ATTRIBUTES.response IS "BASIC">
   <CFSET response = "1">
<CFELSEIF ATTRIBUTES.response IS "SIGNATURE">
   <CFSET response = "2">
<CFELSEIF ATTRIBUTES.response IS "ALTERNATE">
   <CFSET response = "3">
<CFELSEIF ATTRIBUTES.response IS "ALL">
   <CFSET response = "4">
</CFIF>
</CFIF>

<CFSET vcd = "0">
<CFIF IsDefined("ATTRIBUTES.verbconf")>
<CFIF ATTRIBUTES.verbconf>
   <CFSET vcd = "1">
</CFIF>
</CFIF>

<CFSET firstshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot1")>
<CFIF ATTRIBUTES.shipnot1 IS "DOMESTIC">
   <CFSET firstshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot1 IS "INTERNATIONAL">
   <CFSET firstshipnotify = "2">
</CFIF>
</CFIF>

<CFSET secondshipnotify = "0">
<CFIF IsDefined("ATTRIBUTES.shipnot2")>
<CFIF ATTRIBUTES.shipnot2 IS "DOMESTIC">
   <CFSET secondshipnotify = "1">
<CFELSEIF ATTRIBUTES.shipnot2 IS "INTERNATIONAL">
   <CFSET secondshipnotify = "2">
</CFIF>
</CFIF>
</CFIF> 

<CFIF proceed>
<CFHTTP
URL="http://www.ups.com/using/services/rave/qcostcgi.cgi"
METHOD="POST"
>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="accept_UPS_license_agreement" VALUE="yes">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="10_action" VALUE="3">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="13_product" VALUE="#product#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="15_origPostal" VALUE="#origPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="19_destPostal" VALUE="#destPostal#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="22_destCountry" VALUE="#destCountry#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="23_weight" VALUE="#weight#">
<CFIF IsDefined("ATTRIBUTES.value")><CFHTTPPARAM TYPE="FORMFIELD" NAME="24_value" VALUE="#ATTRIBUTES.value#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.length")><CFHTTPPARAM TYPE="FORMFIELD" NAME="25_length" VALUE="#ATTRIBUTES.length#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.width")><CFHTTPPARAM TYPE="FORMFIELD" NAME="26_width" VALUE="#ATTRIBUTES.width#"></CFIF>
<CFIF IsDefined("ATTRIBUTES.height")><CFHTTPPARAM TYPE="FORMFIELD" NAME="27_height" VALUE="#ATTRIBUTES.height#"></CFIF>
<CFHTTPPARAM TYPE="FORMFIELD" NAME="29_oversized" VALUE="#oversized#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="30_cod" VALUE="#cod#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="33_hazard" VALUE="#hazard#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="34_handling" VALUE="#handling#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="35_calltag" VALUE="#calltag#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="37_saturdaydelivery" VALUE="#saturdaydelivery#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="38_saturdaypickup" VALUE="#saturdaypickup#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="39_response" VALUE="#response#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="43_vcd" VALUE="#vcd#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="44_firstshipnotify" VALUE="#firstshipnotify#">
<CFHTTPPARAM TYPE="FORMFIELD" NAME="45_secondshipnotify" VALUE="#firstshipnotify#">
</CFHTTP>

<CFIF ListFirst(CFHTTP.FileContent, "%") IS "UPSOnLine3">

<CFSET CALLER.UPS_Success = "Yes">
<CFSET CALLER.UPS_Service = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_FromPostal = ListGetAt(CFHTTP.FileContent, 3, "%")>
<CFSET CALLER.UPS_FromCountry = ListGetAt(CFHTTP.FileContent, 4, "%")>
<CFSET CALLER.UPS_ToPostal = ListGetAt(CFHTTP.FileContent, 5, "%")>
<CFSET CALLER.UPS_ToCountry = ListGetAt(CFHTTP.FileContent, 6, "%")>
<CFSET CALLER.UPS_ToZone = ListGetAt(CFHTTP.FileContent, 7, "%")>
<CFSET CALLER.UPS_Weight = ListGetAt(CFHTTP.FileContent, 8, "%")>
<CFSET CALLER.UPS_BaseCharge = ListGetAt(CFHTTP.FileContent, 9, "%")>
<CFSET CALLER.UPS_OptionalCharge = ListGetAt(CFHTTP.FileContent, 10, "%")>
<CFSET CALLER.UPS_Charge = ListGetAt(CFHTTP.FileContent, 11, "%")>
<CFSET CALLER.UPS_GuaranteedBy = ListGetAt(CFHTTP.FileContent, 12, "%")>
<CFSET CALLER.UPS_Error = "">
<CFSET CALLER.UPS_ErrorCode = "">
<CFELSE>

<CFSET CALLER.UPS_Success = "No">
<CFSET CALLER.UPS_Service = "">
<CFSET CALLER.UPS_FromPostal = "">
<CFSET CALLER.UPS_FromCountry = "">
<CFSET CALLER.UPS_ToPostal = "">
<CFSET CALLER.UPS_ToCountry = "">
<CFSET CALLER.UPS_ToZone = "">
<CFSET CALLER.UPS_Weight = "">
<CFSET CALLER.UPS_BaseCharge = "">
<CFSET CALLER.UPS_OptionalCharge = "">
<CFSET CALLER.UPS_Charge = "">
<CFSET CALLER.UPS_GuaranteedBy = "">
<CFSET CALLER.UPS_Error = ListGetAt(CFHTTP.FileContent, 2, "%")>
<CFSET CALLER.UPS_ErrorCode = ListGetAt(CFHTTP.FileContent, 3, "%")>
</CFIF>
<CFELSE>

<CFOUTPUT><H1>Error: #error_message#</H1></CFOUTPUT>
<CFABORT>
</CFIF>

TS1368 Done all of the above...everything is in order, still cannot connect to the store. I have the 5th gen iPod and $50 iTunes gift card. I am going to return both of these items it I cannot find a fix for this.

Make sure that you can access the Internet on your computer or device.
Make sure that your computer meets the iTunes minimum system requirements.
Make sure that your operating system is up-to-date:
Done all of the above...everything is in order, still cannot connect to the store. I have the 5th gen iPod and $50 iTunes gift card that I cannot use(been trying now for 6 days). I am going to return both of these items if I cannot find a fix for this.

When I called Apple (after wating 42 min. for a live person) I was told to run the APPLE Software Update and turn off location services then restart my computer. There were no available updates. The iPod touch I got on Christmas day. The iTunes app was downloaded the same day. Since day 1 I have not been able to connect. I also followed lllaass's advice and followed instructions on the following 2 websites.
http://www.idownloadblog.com/2012/09/20/fix-for-cannot-connect-error/
http://www.youtube.com/watch?v=PIUitRyZS6U
After restarting my computer:
From the iTunes app I click on the 'iTunes Store'
A new window opens and I get the following message:
This Apple ID has not yet veen used with the iTunes Store.
Please review your account information
So I click on 'Review' and am taken to a crude screen that says
Welcome to the iTunes Store
With an Apple ID, you can download the latest music, videos, and more.
To begin creating your Apple ID, click Continue.
So I click on 'Continue'
A pop up window says:
We could not complete your iTunes Store request. An unknown error occurred (-1202).
There was an error in the iTunes Store. Please try again later.
And the only option I am left with is to click 'OK'
After every fix this same scenerio just loops and loops and loops

Unable to find moniker information for archive collection ArchiveCollection

In attempting to setup archive transfer between PROD and DEV I needed to rename an existing outgoing provider and the only way I found I could do this is to delete the existing provider and recreate it with a new name. I think by doing this it has caused and issue and now the CS log displays an error similar to below:
Unable to find moniker information for archive collection ArchiveCollections. The collection ecmprd2 has no information associated with it. It no longer exists in the system. [ Details ]
An error has occurred. The stack trace below shows more information.
!csMonikerUnableToFindArchiveInfo,ArchiveCollections!csArchiverCollectionNotFound,ecmprd2
intradoc.data.DataException: !csArchiverCollectionNotFound,ecmprd2
     at intradoc.server.archive.ArchiveUtils.getCollection(ArchiveUtils.java:492)
     at intradoc.server.MonikerWatcher.parseMonikerInfo(MonikerWatcher.java:325)
     at intradoc.server.MonikerWatcher.computeMonikers(MonikerWatcher.java:248)
     at intradoc.server.MonikerWatcher.notifyWatched(MonikerWatcher.java:154)
     at intradoc.server.Service.notifyWatched(Service.java:710)
     at intradoc.server.Service.updateSubjectInformation(Service.java:670)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1128)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Does anyone know if this is caused by deleting the existing outgoing provider and if it is how can I resolve it?
Regards,
Andrew

I misspoke when I said to recreate the outgoing provider because an outgoing provider only provides the "connection" from DEV to PROD. What I meant is that if the provider is deleted and the automated archives are left alone, they would fail because that connection is gone. Since you recreated an outgoing provider (even with a different name), that connection should be there again.
I highly doubt each archive "stores" the name of the outgoing provider in its configuration, so I doubt either of those options would work. The only thing that makes sense is that the collection is "gone" (ie. DEV cannot find 'ecmprd2') or the PROD collection isn't called 'ecmprd2' anymore. I'm assuming "ecmprd2" is the instance name of your PROD instance, right? If you can, try deleting all archives and see if the error exists afterwards.
Why did you have to "rename" the provider to begin with?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

Could not find installation information for this machine contact applecare

I installed Lion on my MacBook, worked great. After 2 months I wanted to clean install the Lion on the same Macbook; went to Apple Support website and there they had instructions on how to clean install Lion.
I followed the instructions and erased the partition where the OS Lion was installed. Then I tried to re-install it, it kept saying "could not find installation information for this machine contact applecare".
When I contacted apple care, they asked me to pay 49 dollars in order to get help from them. I already paid the cost for the LION OS and now they want another 49 bucks. This is just insane. I'm not a fan of Apple, Mac or iCrap. But I was thinking to buy a new Mac after selling this one. Now I have no interest in buying any Mac product. Windows 7 is much much better than Lion OS X.
I have to fix this before I sell it on ebay so Has anyone tried to clean install Lion ?

I'm with you, OS X Lion has turned a lot of stomachs.
Here's how to go about what you need to do:
Get out your 10.6 installer disk, make sure it's clean and polished (bit of rubbing alcohol and a very soft cloth)
Get 2 blank external drives, connect one and hold c and boot off the 10.6 installer disk, use Disk Utility to format the external drive use
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option MBR, format FAT
Disconnect and reboot.
Repeat the same procedure for the second drive and format the
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option GUID, format OS X Extended Journaled
Quit and install 10.6 on the external GUID drive.
Reboot holding the option key, you can boot off the 10.6 external drive, setup, use your same user name as before, update to 10.6.8, grab your files off the OSX Lion partition, transfer a copy to the FAT formatted drive.
What you do is your choice,
To continue using the machine under 10.6
you can erase the entire (select the whole internal drive, not just the OS X Lion Paritition) and use Carbon Copy Cloner to clone 10.6 external to the internal drive,
To sell the machine with a fresh 10.6 install
or simply hold c boot off the 10.6 installer disk and install 10.6 on the internal drive and upon reboot, just hard shutdown by pressing the powerbutton before going through setup. The next person who gets the machine will be greeted by the setup again.
You can use the files on the FAT drive on your Windows PC in some cases.
Else download the free LibreOffice and it can read quite a few file formats.

Could not find schema information for the attribute 'filename'

Can anyone help me.
I download the VB.NET sample source and try to run the application and got this error.
"Could not find schema information for the attribute 'filename'"
and
"Could not find schema information for the attribute 'url'"
and
"Custom tool warning:Schema validation warning:Schema item 'element' named 'AccountWS_AccountUpate_Input' from namespace 'urn:crmondemand/ws/account/' is invalid. Namespace 'urn:/crmondemand/xml/account' is not available to be referenced in this schema"
Thanks
Pitiporn

Are these errors or warnings? If warnings, you should be able to just ignore them.

Could Not Find Installation Information for this Machine" I need Help!

i accidentaly erased the main drive and now i am trying hard to reinstal the OS X again but i constantly keep seeing this "could not find installation information for this machine" i need help....

hello,
I had the same problem yesterday, just go to a place with a better internet conncetion, it will work fine...
good luck

Cannot find warranty information for T500 - 2081 RR1

Similar Messages

Maybe you are looking for