Cannot find xmldb_intro.html

I am trying to access the article
http://otn.oracle.com/tech/xml/xmldb/htdocs/xmldb_intro.html
which is references from a couple of locations in OTN but always returns error 404.
Thanks!
Keith

That particular article is very dated, and has been removed. Please try the XMLDB main page at
http://otn.oralce.com/tech/xml/xmldb/index.html

Similar Messages

Cannot find the HTML browser installed on your system

Guys forgive me if you have answered this before, I have
tried a search of previous issues TNA.
I have reloaded R/H 6 to my laptop (with full admin rights
set against my user name) everything except works except generating
in Microsoft HTML Help I get the following error when I click
Finish: cannot find the HTML browser installed on your system
Any ideas welcome. With thanks, J

Hi JayRichard
You might try the following.
Inside RoboHelp HTML, click Tools > Options...
Click the Tool Locations tab
At the bottom of the dialog should be an area listing
"Browser paths". You should see one for Internet Explorer and one
for Netscape. Try clicking the little file folder icon to the right
of one of them. (Whichever browser you are using)
Navigate to and select the executable file for the browser.
Mine for Internet Explorer says:
D:\Program Files\...\iexplore.exe (The full path is
D:\Program Files\Internet Explorer\iexplore.exe
Dismiss the dialogs by clicking the Open and OK buttons until
they are all gone.
Keep us posted on whether this helps... Rick

Error Message= x Cannot find the HTML help browser installed on your system.

Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also using the trial version.
The error message states, "Cannot find the HTML help browser installed on your system."
Thank you!

Sounds like a problem with the installation of RoboHelp on those machines. When you install RoboHelp, it installs the necessary files to view a CHM.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Win2kr2 IIS7 customize gw login page cannot find index.html

Successfully installed GW802hp2 on Win2kr2 IIs7 and redirected to /gw/webacc.
I want to customize GW Webacc login page with company logo but cannot find the index.html file
Where is it located? I have copied the logo and splash files already.

I have found the answer - at least to meet my needs. I hope this helps someone else.
After enabling HTTP-Redirect to /gw/webacc
the file to edit is: c:\novell\groupwise\tomcat5.5\webapps\gw\WEB-INF\classes\templates\webacc\css\login.htt
under DOCTYPE HTML PUBLIC . . . . at approx. line 144, enter the name of your logo.ico file (replacing /favicon.ico)
the image files need to be place in the following folder:
c:\novell\groupwise\tomcat5.5\webapps\gw\webaccess \201012110348\images\
1) your logo.ico; 2) replace the install_top_n.png with your install_top_n.png file (this is at the top of the GW login screen - you may have iused a splash.gif or splash.png n IIs6). 3) If you want to remove the watermark, or have a different watermark on the GW login screen, replace install_watermark_n.png with your watermark.png file.
NOTE: If you use the same file names and copy them to this directory, you won't have to modify the login.htt file with the name of your custom .png files.
The above will work for IE and Firefox, although there may be some modifications necessary for Firefox.

Cannot find bean in html:write gag

hi everybody
i am new to struts
in my application i am getting the following error
Cannot find bean error in any scope
in my code
in jsp i have given
logic:messagesPresent>
<UL>
<html:messages id="error" message="false">
<LI><bean:write name="error"/></LI>
</html:messages>
</UL>
</logic:messagesPresent>
and in my validate method in action form
i have given
ActionErrors errors = new ActionErrors();
errors.add(text parameter,ActionError parameter)
while creating ActionError Object i am passing one key that is refering the message in property file
any body can help me to resolve this problem
thanks in advance

Good Morning here!
Thank you all for the fabulous responses!
First of all, let me mention an important Fact. I am using The Struts Layout Library to build dependent Combo Boxes. so My enclosing html tag is <html:layout>
I am not sure If this has an influence on how Struts verifies the existence of Session Beans/Variables.
As I mentioned before: Action Class1 puts some variables in session and forwards to the JSP page in Question, those values load well the first time, and get printed in the JSP.
The JSP page has an Action Class2, triggered by a submit button, Action Class2 forwards to the same JSP page, But when this Action Class2 is called the values that were put in Session using Action Class1 get Lost.
tolmank, your reply is Very Interesting, because my server is internally changing my IP address to somename:8080. Are you sure this is what definitely could be causing the problem?
Thanks to all of you guys!
God Bless.
Post your comments... and let me know what you think.

Cannot find bean in html:write

hi everybody
i am new to struts
in my application i am getting the following error
Cannot find bean error in any scope
in my code
in jsp i have given
logic:messagesPresent>
<UL>
<html:messages id="error" message="false">
<LI><bean:write name="error"/></LI>
</html:messages>
</UL>
</logic:messagesPresent>
and in my validate method in action form
i have given
ActionErrors errors = new ActionErrors();
errors.add(text parameter,ActionError parameter)
while creating ActionError Object i am passing one key that is refering the message in property file
any body can help me to resolve this problem
thanks in advance

Good Morning here!
Thank you all for the fabulous responses!
First of all, let me mention an important Fact. I am using The Struts Layout Library to build dependent Combo Boxes. so My enclosing html tag is <html:layout>
I am not sure If this has an influence on how Struts verifies the existence of Session Beans/Variables.
As I mentioned before: Action Class1 puts some variables in session and forwards to the JSP page in Question, those values load well the first time, and get printed in the JSP.
The JSP page has an Action Class2, triggered by a submit button, Action Class2 forwards to the same JSP page, But when this Action Class2 is called the values that were put in Session using Action Class1 get Lost.
tolmank, your reply is Very Interesting, because my server is internally changing my IP address to somename:8080. Are you sure this is what definitely could be causing the problem?
Thanks to all of you guys!
God Bless.
Post your comments... and let me know what you think.

I have installed Copy HTML but cannot find it as an option under any Menu. Only copy is there.

I have installed the Copy HTML plug-in but cannot find it as an option under any Menu. The only option is "copy". Where do I find this option so I can use it?

Your screenshot shows that you have the page source visible, so you already have the source code including HTML code available to copy.<br />
You should see the Copy HTML entry if you right-click a normally rendered HTML page.

Dalinton Karma: 0 Registered member my firefox browser will not load html images when i'm using notepad? It load the html files but not image says cannot find

I'm creating a webpage with Notepad and wanting to see illustrations using my browser, i have loaded the text html files and that works fine however when i try to load images using this command...<img src="life.jpg" width="403" height="403"> it fails to load...error says cannot find file however the file it says it cannot find is the correct name and the image is located in the same folder save as html...is this a pc security problem? Tried different images...saving as jpg, html...thanks

Any errors in the Web Developer > Error Console (Ctrl+Shift+J) or Web Console (Web Developer > Web Console;Ctrl+Shift+K)?
See also:
*https://developer.mozilla.org/en/Tools/Web_Console
Are you using relative links to the image files?<br />
Can you post (part of) the code?
Make sure that you are using forward slashes in the file paths and not backslashes.
Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).<br />
*http://kb.mozillazine.org/Images_or_animations_do_not_load

Cvc-elt.1: Cannot find the declaration of element 'html'

I was getting an error when I was trying to validate the following XML file as below:
cvc-elt.1: Cannot find the declaration of element 'html'
However the error below goes away when I type in
<xhtml:html xmlns:xhtml="http://www.w3.org/1999/xhtml"
instead of "<html xmlns="http://www.w3.org/1999/xhtml"
I am not sure why the second way works. I am not familiar with namespaces, so if anyone could tell me why the second approach works, i would be grateful. Or, is there any other reason also that makes the error appear..Please demystify. Thanks very much
The error:
*cvc-elt.1: Cannot find the declaration of element 'html'*
{code}
<?xml version="1.0" encoding="UTF-8"?>
*<html xmlns="http://www.w3.org/1999/xhtml"*      xmlns:xhtml="http://www.w3.org/2002/Xforms"
     xmlns:ev="http://www.w3.org/2001/xml-events"
     xmlns:xsd="http://www.w3.org/2001/XMLSchema"
     xmlns:xsi="http://www/w3.org/2001/XMLSchema-instance"
     xmlns:xxforms="http://orbeon.org/oxf/xml/xform"
     xmlns:xs="http://www.w3.org/2001/XMLSchema"
     xmlns:fe="http://example.com/form/xform"
     xmlns:f="http://orbeon.org/oxf/xml/formatting"
     xmlns:xforms="http://w3.org/2002/xforms">
               <head>
                    <title> ProtoType Complaint Form - 2 </title>
                    
                    
                    
                    
                    
                    
                    
                    
                    <style type="text/css">
                    
                         h1
                              font: bold 20pt helvetica,verdana;
                         h2
                              font: bold 18pt helvetica,verdana;
                         h3
                              font: bold 16pt helvetica,verdana;
                         /* blue background for Group labels */
                         /* h4 { font: bold 14pt helvetica,verdana; background-color: #1078E1; } */
                         h4
                              font: bold 14pt helvetica,verdana;
                         .xforms-group {
                         /* border: 10px; */
                         border: thin solid #0000FF;
                         background-color: #ffffcc;
                         PADDING-RIGHT: 0.5em;
                         DISPLAY: block;
                         margin-bottom:5px;
                         /* display: table-row; */
          .xforms-label { font-weight: bold }
                    </style>
                    
                    
                    
                    <xforms:model schema="test2.xform.xsd" id="COMPLAINT_DATA">
                         
                         <xforms:instance id="taskinput">
                              <fe:input>
                                   <fe:Arrestee_Last_Name/>
                                   <fe:Arrestee_First_Name/>
                              </fe:input>
                         </xforms:instance>
                              <xforms:instance id="taskmetadata">
                              
                                   <taskmetadata/>
                              </xforms:instance>
                         
                         <xforms:instance id="taskoutput">
                              <fe:output>
                                   <fe:Arrestee_Last_Name/>
                         <fe:Arrestee_First_Name/>
                              </fe:output>
                         </xforms:instance>
                         
                         
                         <xforms:action ev:event="xforms-ready">
                              <xforms:action xforms:if="string(instance('taskoutput')/@saved) != 'true'">
                                   <xforms:setValue ref="instance('taskoutput')/fe:Arrestee_Last_Name" value="instance('taskinput')/fe:Arrestee_Last_Name" />
                                   <xforms:setValue ref="instance('taskoutput')/fe:Arrestee_First_Name" value="instance('taskinput')/fe:Arrestee_First_Name" />
                              </xforms:action>
                         </xforms:action>
                         
                         <xforms:bind nodeset="instance('taskoutput')/fe::Arrestee_Last_Name" relevant="true()" type="xs:anyURI" />
                         <xforms:bind nodeset="instance('taskoutput')/fe:Arrestee_First_Name" relevant="true()" type="xs:anyURI" />
                    </xforms:model> 
               </head>
          <body>
                    <h3>
                         <center>
                              <font color="blue">
                                   Criminal Complaint <br></br>
                              </font>
                         </center>
                    </h3>
                    
                    <xforms:group appearance="full">
                    <p class="proto">
                         <xforms:input model="COMPLAINT_DATA" ref="instance('taskinput')/fe:input/fe:Arrestee_Last_Name">
                              <xforms:label>Arrestee Last Name: </xforms:label>
                         </xforms:input>
                    </p>
                    <p class="proto">
                         <xforms:input model="COMPLAINT_DATA" ref="instance('taskinput')/fe:input/fe:Arrestee_First_Name">
                              <xforms:label>Arrestee First Name: </xforms:label>
                         </xforms:input>
                    </p>
                    </xforms:group>
          </body>
     </html>

Though this is not my area, you can have a look at this thread which may help you
[Re: XML inputs in a MII transaction to be used as a Web Service call|XML inputs in a MII transaction to be used as a Web Service call;
thanks
G. Lakshmipathi

Cannot find dashboard and reports after upgrading rdp from 10g to 11g OBIEE

Hi all
I am trying to upgrade from OBIEE 10g to 11g. These two products are installed on different servers. I have followed the guide: http://www.oracle.com/technetwork/issue-archive/2011/11-jul/o41bi-402913.html and everything seems to work fine.
So i have taken a copy of rdp from the server where was installed OBIEE 10g and took it in the server where OBIEE 11g is installed.
Ran the upgrade tool and upgrade finished successfully. Restarted the BI Servers in core application on Enterprise Manager.
Now when i access the upgraded rpd, the layers and the fields are fine but I cannot find all the reports and dashboards that i had created.
Am I missing any upgrade steps?
Please suggest
Thank you and best regards

Hi Deepak,
Thanks for your response.
Oracle also came back to me and looks like my method is not valid:
Hi Jim,
Thanks a lot for the information. First of all I would like to inform you that upgrade CANNOT be performed across two machine. So, if 10g installation is on Host A, then upgrade to 11g will be on Host A.
So, in your scenario this is what you can do:
1. On Host A running Forms/Discoverer 10g on Windows 2003, install Forms/Discoverer/Reports 11g (11.1.1.6.0)
2. Run the upgrade Assistant to perform the upgrade from 10g to 11g.
3. Now upgrade OS of Host A to Windows 2008
In short, I would like to inform you that upgrades across machines does not work. Source instance which is 10g and destination instance which is 11g must exist on same box.
Here is the documentation which you can follow:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10130/toc.htm
(Oracle® Fusion Middleware Upgrade Guide for Oracle Portal, Forms, Reports, and Discoverer)
11g Release 1 (11.1.1)
Let me know if you have any further questions.
Thanks,
Rishi

HP Deskjet 3050a cannot find network printer

I need to find out what my IP address is for my printer. I may have changed it accidently when I was trying to set up my printer to a new router. I have reset the default settings. I have tried to go to HP file where it says I can change my IP address and I get the error "cannot find network printer". I have done all of the obvious deinstall, reinstall, added MAC address to router. Nothing will recognize my printer. Please help. Thank you

Hello again,
OK, thanks for the updated information. Try these steps...
Changing wireless settings
If you decide to change the wireless network settings for your wireless home network, you will need to configure your wireless printer with the new settings.
To configure the new wireless settings on a printer that features a Wireless Setup Wizard:
From the printer’s control panel, open the Wireless Settings menu. Many products provide access to the Wireless Settings by pressing the Wireless Button or touching the Wireless icon on the printer’s control panel. Consult the printer’s help documentation if you do not know how to access the Wireless Settings menu.
From the Wireless Settings menu select Wireless Setup Wizard. The Wireless Setup Wizard will guide you through the process of configuring your printer with the new wireless settings. Input your Wireless Network Name and Wireless Password when prompted.
You can print a Wireless Network Test report from the Wireless settings menu to confirm the printer was successfully connected to your network.
To configure your wireless settings on a printer that does not feature a Wireless Setup Wizard:
First, make sure your computer is connected to your network. You will also need a USB cable, which is temporarily used during the configuration. Be sure NOT to connect the USB cable between the computer and printer until instructed to do so by the software.
If your HP printer software is already installed on your computer Windows XP, Windows Vista or Windows 7:
Use Start -> Programs -> HP -> <your printer model> -> Printer Setup & Software. Windows 8:
Launch the Printer Software from the Start screen (icon for the printer model name) or from the tile named for your printer.
Select (click or touch) Utilities on the top of the Printer Software screen
Select Printer Setup & Software
Also,
Link below for some useful information on getting your printer back on the network........Good Luck!
http://www.hp.com/global/us/en/wireless/reconfiguring-system-help3.html
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM

I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMS

Unless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
   repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
    WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
      rep_status := report_object_status(v_rep);
    END LOOP;
    SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
    IF rep_status = 'FINISHED' THEN
      WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
    ELSE
      message(rep_status);
    END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
.

Murder on the Airport Express (AE 1st Gen cannot find Wireless while plugged in in the same room as the modem, router and Time Capsule

First, the reason for my compounded frustration:
I wrote a lengthy, comprehensive post on this late last night. I submitted it and received a notice at this URL:
https://discussions.apple.com/___sbsstatic___/maintenance.html?start=0&tstart=0
It gave a message: "A yellow sticky bearaing the words, "We'll be back soon." and a typed message reading, "We are busy updating Apple Support Communities for you and will be back shortly." Needless to say, it never came back. This morning as I began trying to reconstruct the very detailed post I wrote last night, the Communities system offered me an opportunity to restore the post from last night. Sadly, it contained only a portion of the first line.
I'm going to try it again. The problem inherent in putting it all in words last night, is that I no longer remember the exact wording of the error messages.
I've never gotten this Airport Express (1st gen, purchased mid 2010) to work. I thought it was working, but working poorly. A green light on the device is, apparently, NOT an indication of connection to the wireless. It wasn't workingl.
Description of devices which use the network:
I have a Broadband network with a modem.
It is connecteed to my 2T Timecapsule (purchased mid 2010).
Connected to that is a 24 port Cisco Router.
Not connecting to that, though showing a solid green light, is my Airport Express (1st Generation, purchased mid 2010)
Connected to the router are many ethernet cables giving hard-wired access to:
Printers (HP 8600 Pro purchased 2012))
MacBook Pro (purchased mid 2010) and
IMAC (purchased mid 2010).
3 Apple TV devices (1st generation purchased early 2011)
1 Apple TV device (2nd generataion purchased August 2012)
Connecting to the Wireless Network are IOS devices (current IOS versions on all)
iPad 2nd generation (purchased the day it was available)
iPad 3rd generation (purchased the day it was available)
iPod (mid 2010)
iPhones (4S)
Description of Layout of Network/House
My home is approximately 70 feet by 25 feet.
All Networking hardware is at one end of the house, the south side.
Airport Express (1st Gen, 2010) has been placed in the middle of the house to boost the wireless access at the north end of the house.
Ethernet cables are installed under flooring with cable ends extending up through flooring, and are availble to all devices with Ethernet ports..
Description of Problem
Investigation of the wireless access dysfunction with the iPad (2nd generation, mid 2010) revealed no connection to the Wireless Network, in spite of glowing green light on Airport Express and Airport Utility screen.
Description of actions taken to correct the problem
Loaded Airport Utility on MacBook Pro.
Airport Express shows green light on screen.
Double clicked on Airport Express Icon
Message that Airport Express was unable to extend the network
Message changes suddenly to something about not finding the Airport Express
Airport Utility searches Airport Express, attempting to read its settings
Message appears: Device not found. Airiport Express was previously part of the network, and offers to let me "forget" the base station.
I exit the error message.
A yellow triangle bearing an exclamation point sits to the left of the Airport Express' Description
Airport Express shows green light (as always)
Clicking the link, "Other AirPort Base Stations" indicates no base stations can be found.
Moved Airport Express to the room at the south end of the house containing all network devices
Plugged it in with clear, completely unobstructed view of Time Capsule.
Light on Airport Express flashes yellow and then turns solid green (like always)
Bring Mac into the room at the south end of the house containing all network devices and the Airport Express with the green light
Close Airport Utility on Mac
Reboot Mac
Open Airport Utility on Mac
Airport Express still shows as it did in 1.1.7. above.
Attempts to check Airport Express' access to Wireless network:
Unplugged Airport Express HEY! THE GREEN LIGHT WENT OUT!!! ;0)
Disconnected all Ethernet cables.
Tested ALL devices for Wireless access.
All devices access the Wireless network extremely well (dot and three curved bars) EXCEPT
IOS Devices tested at the north end of the house. These devices show a blank where the wireless bars should be, and intermittently show a dot.
Followed instructions contained in a similar discussion about Airport Express not functioning:
Unplugged all Networking Hardware
Powered off all Equipment which access the Internet in any possible way.
Powered up all Networking Hardware, one at a time, in the order described in that discussion.
Powered up all Equipment which access the internet, one at a time.
Tested ethernet cablingAll equipment functioning.
Tested Wireless access:
Removed all ethernet cabling
All devices, including IOS devices, access the Wireless Network perfectly EXCEPT any placed in the north end of the house. Those perform exactly as they did in step 3.3.2.
Connected all ethernet cabling.
Plugged Airport Express into socket in the Network Hardware room at the south end of the house. I get exactlyt the same results as before. The lovely green light glows on the Airport Express. Airport Utility reports Airport Express cannot find the Wireless network and also says there are no base stations connected to the internet.
Still in Network Hardware room, I attempt to find other base stations by cabling the Airport Express to the MacBook Pro
Airport Utility shows Airport Express with a green light
I double click the Airport Express Icon
Box says connection is average and status is (green light) Extended Network.
I click Edit
I go through each tab. I note that in the Wireless tab, the Network Mode is as I had set it, "Extend a wireless network".
Under the Network tab I note that "Enable Access Control" is as it should be, NOT selected.
Under the AirPlay tab, I note that "Enable airPlay" is selected.
I click cancel and leave the Edit screens.
Curious to know if Airport Express can find the Wireless network now that the device claims to be functioning as an extended wireless network, I disconnect the ethernet cable from the Airport Express.
I watch the Airport Utility screen closely. Nothing is happening.
With bated breath, I double click on the Airport Express icon.
The popup box shows "extended wireless network"
I click on edit and we start the whole mess over again. (See 1.1-9. above)
Curious to know if cabling the Airport Express to the iMac (almost to middle of house) will offer hope and prosperity to IOS devices at north end, I unplug the Airport Express and carry its now-exhausted little body to the iMac, ethernet cable in hand.
As I unplug the iMac from its ethernet access, I'm informed by Cranky Boy that no way is he going to accept that as a reasonable solution to his problem. He will not live wireless while even one ethernet cable is poking up through a floorboard.
Cranky Boy is reassured when informed that, though the Airport Utility shows the Airport Express connected, merely double clicking on the icon produces the same result as laboriously described in 1.1-9. above.
After quieting Cranky Boy by reconnecting the iMac to the Ethernet, I return the Airport Express to the Network Hardware room.
Again, curious to know ... I reconnect the Airport Express to the MacBook Pro. I want to know if it will exrtend the Wireless network from its position one foot from the Wireless Network.
I close and reopen Airport Utility (as I always do, but forgot to write)
I click on the Airport Express icon (which bears a little green light like the other big boys).
BUT THIS TIME, when I click on the Airport Express icon, the pop-up box says my connection is Excellent, the green light status shows, "Extended Network" and clicking on "Extended Network" produces the same old `Airport Express was unable to extend the Wireless Connection.
I click on the Edit option.
I buzz through all the tabs. I cancel instead of update, leaving everything as it was (as I did the first time)
I decide to go back into edit and select "Internet Options" under the "Internet" tab.
Since I have no idea whatsoever as to what IPV6 is and what it governs, I decide to configure IPV6 to Automatically Connect and then, with a whole new set of opportunities, I leave IPV6 Mode set to "Tunnel" and then I learn that I will get to see what happens when "Enable IPV6 Connection Sharing" is enabled.
I check the other tabs to see if anything has changed in their menus
Jesus Saves and so did I.
Apple updates and so did I.
I am warned that my device and its network services will be temporarily unavailable if I continue.
It seems unaware that I am laughing uncontrollably at the suggestion that my device and its services will be TEMPORARILY AVAILABLE. What? An improvement in performance is warned?
Life continues and so do I.
I breathe deeply to decrease my adrenaline.
Airport Utility flashes a red warning next to the Airport Express Icon and then quickly rethinks the matter and decides to show it as connected.
I click on the Airport Express Icon. This time my connection is only "good".
I click on Extended Network. With a new-found consistency it informs me that my device is unable to extend the Wireless network and it chats with me about using the same Wireless password for my device that is used for the Wireless network access. I did. It is.
I change my settings back to the way they once were, I save like Jesus and Update like Apple
I decide to go back into Edit and modify the settings under the Wireless tab, changing from "Extend Wireless Network" to "Join Wireless Network".
I save.
I click on the Airport Express Icon. My connection has degraded further to "Average"
I click on edit just to see what will happen, but no further information is forthcoming. Settings are as I left them.
I wonder if the Airport Express would extend itself now that it has joined the Wireless Network.
I click the Airport Express Icon.
I click Edit
I change the Network Mode from "Join a Wireless Network" to Extend a Wireless Network. Unfortunately, there was no option for "don't forget where the Wireless Network is!"
I am still "unable to extend the Wireless network"
I disconnect the Airport Express from my MacBook Pro.
After closing and opening Airport Utility, I sit and stare at the Airport Express Icon.
It has no light or error messages
It has a yellow triangle with exclamation point
It has no light or error message
It has a yellow triangle with exclamation point
I finally decide to see what THIS error messages says. It says Device Not Found. Patti Harada's AirPort Express was previously part of your network. Check that it is still in range of your network and is plugged into a power outlet. Click Forget to remove this base station from this network."
I click "Forget". Airport Utility has forgotten the Airport Express ever existed. It has also forgotten how to find it again.
I, however, am unable to forget how much I shelled out for this POS and fear I will never recover from working this intensely and tediously on documenting something so hideously inconsistent in its test results.
I wonder if I should recable the Airport Express to my MacBook Pro
I decide I've had about enough.
I document this ad nauseum in the hopes that someone can read it THOROUGHLY and offer me a solution to my problem. What is my problem? I am so busy fighting off Alligators that I forgot I only came in to drain the swamp! Ah, but I remember now: Cranky Boy can't watch Netflix on his iPad (2nd generation) in the north end of the house.
Any solution that works will do. I'll buy another piece of whatever kind of equipment you think best.

Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

: Cannot find any information on property 'Product' in a bean of type '

/********jsp file ********/
<%@ page language="java" import="taxrate.*" %>
<HTML>
<BODY>
<jsp:useBean id="TaxRate" scope="application" class="taxrate.TaxRate" />
before modify
<br>
product :<jsp:getProperty name="TaxRate" property="Product"/>
�@ <br>
rate :<jsp:getProperty name="TaxRate" property="Rate" />
<jsp:setProperty name="TaxRate" property="Product" value="Hello" />
<jsp:setProperty name="TaxRate" property="Rate" value="2.9" />
after modify�F
<br>
product : <jsp:getProperty name="TaxRate" property="Product" />
�@ <br>
rate : <jsp:getProperty name="TaxRate" property="Rate" />
</BODY></HTML>="TaxRate" property="Rate" />
</BODY></HTML>
/*******bean file********/
package taxrate;
import java.sql.*;
public class TaxRate{
String Product;
double Rate;
public TaxRate(){
this.Product = "A001";
this.Rate = 5;}
public void setProduct (String ProductName)
{this.Product = ProductName;}
public String getProduct(){return(this.Product);}
public void setRate (double rateValue)
this.Rate = rateValue;
public double getRate()
return (this.Rate);
/******the error is********/
Error: 500
Location: /client/taxrate.jsp
Internal Servlet Error:
org.apache.jasper.JasperException: Cannot find any information on property 'Product' in a bean of type 'com.nokianeu.client.TaxRate'
     at org.apache.jasper.runtime.JspRuntimeLibrary.getReadMethod(JspRuntimeLibrary.java:619)
     at org.apache.jasper.compiler.GetPropertyGenerator.generate(GetPropertyGenerator.java:101)
     at org.apache.jasper.compiler.JspParseEventListener$GeneratorWrapper.generate(JspParseEventListener.java:730)
     at org.apache.jasper.compiler.JspParseEventListener.generateAll(JspParseEventListener.java:200)
     at org.apache.jasper.compiler.JspParseEventListener.endPageProcessing(JspParseEventListener.java:169)
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:183)
     at org.apache.jasper.runtime.JspServlet.loadJSP(JspServlet.java:413)
     at org.apache.jasper.runtime.JspServlet$JspServletWrapper.loadIfNecessary(JspServlet.java:149)
     at org.apache.jasper.runtime.JspServlet$JspServletWrapper.service(JspServlet.java:161)
     at org.apache.jasper.runtime.JspServlet.serviceJspFile(JspServlet.java:261)
     at org.apache.jasper.runtime.JspServlet.service(JspServlet.java:369)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.tomcat.core.ServletWrapper.handleRequest(ServletWrapper.java:503)
     at org.apache.tomcat.core.ContextManager.service(ContextManager.java:559)
     at org.apache.tomcat.service.http.HttpConnectionHandler.processConnection(HttpConnectionHandler.java:160)
     at org.apache.tomcat.service.TcpConnectionThread.run(SimpleTcpEndpoint.java:338)
     at java.lang.Thread.run(Unknown Source)
/******* use tomcat 3.11**********/
please give me the right answer
thank you!

Hi xzwsun.
Where did you put your class taxrate.TaxRate ?
In which folder? is it in \WEB-INF\classes ?
so that you have \WEB-INF\classes\taxrate\TaxRate.class
--Paul.

Cannot find xmldb_intro.html

Similar Messages

Maybe you are looking for