Cannot fresh install.....PERIOD
Mid 2009 MBP with 256 SSD and 8 gb of ram upgrades
ML worked fine for a few weeks then started getting major kernel issues and random reboots so decided to fresh install.....that is where the problems really started
Here is what I have tried and no matter what I get the same crash
- tried a fresh ML install to the SSD, no joy
- reinstalled the old HD and tried fresh install of ML, no joy
- tried reinstalling 10.6 from the CD to the SSD, no joy
- tried installing 10.6 from the CD to the old HD, no joy
I just tried again to the SSD
Each time the install starts, but then quits about 4 minutes into it: this last time I got the following in the "crash log viewer"
Error writing cache to /volumes/SSD/library/caches/com.apple.findsystemfiles.plist
Failed to enumerate /volumes/ssd/library/caches, cannot prune
Failed to verify additionalspeechvoices.pkg
Child exited with status 11
PLEASE HELP!!!
Disconnect all peripherals from your computer and run Apple's hardware test from the disc that came with your computer - Intel-based Macs: Using Apple Hardware Test
Similar Messages
-
Cannot Fresh Install Mountain Lion on SSD
Hi I am new to macs and the first thing I want to do on my mac is install the Mac OSX onto my old SSD from my Windows machine. I have been having great difficulty so far! I created the mac osx dvd following the instructions here. I then took out my old HDD and put in the old SSD, I loaded up from the macosx dvd i created. I then erased the ssd drive as mac extended journal. I then installed the OS. It seemed to work, I loaded up mac osx mountain lion and logged in.
The only thing was that whatever you did on the screen made the spinning thinking wheel appear for far too long. Even opening the finder windows took a while.
I thought the fresh install must have gone funny so I just went through the process gain and tried to install mac osx again. Now I cannot even get the installer to finish! It just stops and says its failed. I have tried wiping the drive again and starting again but now every time the installer fails. Like the first time I tried to install it somehow left some damage or mess behind. Well I hope its not the SSD that is faulty I tested it by plugging it in to another computer with a hard drive docking thing. It seemed to read and write fine!?
I am very confused, could it be a dodgy dvd? I burned it and it seems to work fine, burned it straight from the download so could the download be corrupted?
Its a pain as they are dual layered DVDS and cost a fair amount! Its so frustrating as its my new mac and I just want to get it up and running and do some editing I thought it would all run smoothly, what with it being Mac and all.. :-(
Any help would be very much appreciated! Thanks!Hmm... it seems as if you went through the correct procedures... here's what I'd do, though...
Buy an inexpensive enclosure for your 'old' hard drive (OWC is a good source) and keep the SSD installed in your MBP. Boot from the 'old' drive.
Use Disk Utility to reformat the SSD - format it as "Mac OS Extended (Journaled)" with a single GUID partition.
Use Carbon Copy Cloner to clone your old drive to the SSD. You'll have the option of creating the Recovery partition - do so.
Beofre rebooting, choose the SSD as your Startup Disk under System Preferences. Then reboot. You should boot into your (speedy) SSD now.
Let me know if this doesn't work.
Clinton
BTW: I prefer creating a USB flash drive (8GB+) as a bootable installaton drive rather than a DVD. I've made quite a few of them using Lion DiskMaker (similar process that you describe - just automated). -
I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?
When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available. -
Cannot make a fresh install of Lion on my Macbook Pro.
Whenever I try to reinstall Lion through the Recovery HD menu, the installation goes fine up until a moment when it prompts me that if I would really like to cancel the installation procedure, even though I did not cancel it.
I click to not cancel it, but it does it anyway.
How can I work around this?
Also, when doing reinstallation, I deleted completely my Mac HD. The only difference there is between the current installed OS HD is that it is Journaled and Case-Sensitive, whereas the fresh install I wish to do is only Journaled.
Thanks in advance.Without Snow Leopard you cannot purchase or download Lion, so you haven't much choice unless you wait until Apple releases their USB flash drive with Lion later this month - $69.00.
-
Cannot establish SSL connection after fresh install
Hello,
I performed a fresh install a couple of days ago. Everything is fine, no hardware errors, pacman and curl work like a charm, HTTP servers respond as they should, but SSL servers do not respond the right way.
I tried with elinks, chromium and firefox and they get stuck on SSL negotiations for very long times.
Installed the whole thing again. Same issue.
Just tested with:
openssl s_client -connect facebook.com:443
openssl s_client -connect google.com:443
Seems to work fine, I can GET with no problems.
Also tested with:
wget --debug -O - https://facebook.com
It gets stuck to "Initializing SSL handshake" and after a couple of minutes the connection is closed with error message "Unable to establish SSL connection."
The system date/time are correct, the system is up to date, used the latest install image available at http://archlinux.org, installed following the install guide from the wiki.
All tests performed as root.
Last edited by icecoder (2013-05-30 10:07:14)WonderWoofy wrote:Initscripts maybe... ethernet... since I am not familiar with either of your systems, I cannot answer this.
As I understand, the latest arch uses systemd by default, so there's no need installing initscripts and in https://wiki.archlinux.org/index.php/In … e_internet nothing said I have to configure network as I'm using DHCP.
Last edited by tenzan (2012-10-22 00:02:42) -
Cannot restore files after fresh install of Mountain Lion.
I just did a fresh install of Mountain Lion. I backed up my User Folder manually using an external harddrive. Now that I'm in Mountain Lion, I cannot use the Migration Assistant, because the Drive does not appear, it just keeps spinning saying "Looking for Computers" or whatever it says. (Yes, I chose Time Machine Drive or other Drive from the list) and if I try to just overwrite my user folder by draggin the one I have on my harddrive, it says it can't be modified. So now I'm stuck and can't restore any of my old files and folders. Help!
Restart with the Command and R keys held down and install the OS from there. Click here and scroll down to or search for 'Installing OS X on an external storage device' for more information.
(75096) -
HP ENVY 17 Notebook PC Cannot Install Cyberlink PowerDirector on Fresh Install Windows 8.1
HP ENVY 17 Notebook PC
Product number: F5D54EA#ABU
Windows 8.1 Pro 64-bit
I replaced the original system drive with a SSD, fresh install of wndows 8.1 (not recovery disk), now I canot install Cyberlink PowerDirector downloaded from HP sp69386. During installation it fails with "This is not a valid HP drive, Setup will now abort" It obviously requires something to be available on the drive but I don't know what.
PowerDVD will install just fine.
Please don't mention a Recovery Install it's taken too long to arrive at this stage.
The question is what is the software looking for during installation to satisfy itself that this is a genuine HP laptop and can I replicate that on the SSD.Hi @Darren104
Welcome to the HP Support Community. I saw your post regarding the problem installing the Cyberlink PowerDirector software. As the PowerDirector software is DVD software I can't see how a new SSD would cause the “not a valid HP driver” if you had changed out your optical drive then maybe. I would recommend that you give us a call at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP -
Cannot Do Fresh Install Mountain Lion on My MBP
Hello everyone!
I just wanted to do fresh install on my MBP.
It had OS X 10.8.3 before. And then I wanted to do fresh install using USB bootable Mountain Lion 10.8.2.
But when I reboot from USB, there's an error like this: "There was a problem installing "Mac OS X"."
What should I do? I'm really confused.
I use MBP late 2011 actually.Boot up holding command-r keys into your Recovery Volume.
The screen should give you these choices...
Restore from TM backup
Reinstall Mac OS X
Get help online
Disk Utility
Choose re-install OS X. This will be internet recovery and will take a while depending on your internet speed. -
"canon mp navigator ex has stopped working" cannot get this to work - fresh install on windows 8.1
Trying to get LiDE 110 scanner working on my laptop. I keep getting this message once scan is complete "canon mp navigator ex has stopped working" and then a corrupted pdf is saved - fresh install on windows 8.1 I have used most up to date drivers and software and tried these two "fixes" from an internet search on this topic (it seems to be a common problem that hasn't been addressed by Canon) - I'm on the verge of returning the scanner!! 1) Delete this file: C:\Users\<user name>\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN. RESULT - "My Web Sites on MSN" does not exist in that folder on my computer. 2)Remove "sdc330Twain.ds" from windows Twain-32 folder RESULT - didn't have any effect Thank you, in anticipation!
Currently running the scanner on "Advanced scan to pdf" but would like to have access to the canon software with more options
-
Fresh install Windows Server 2012 R2 cannot RDP
I did a fresh install of WS 2012 R2. I enabled remote access as normal leaving network authentication on. I am unable to rdp to an administrator desktop. I then enabled pinging of the new server to make sure I can see the server. I am able to ping the server
from the WS I wish to RDP from and to ping the WS from the server.
I have installed a lot of servers and never had an issue with this.
Anything new in R2 which I'm missing?Figured it out! Trying to RDP from outside domain, R2 has this rule disabled in Firewall.
Fixed -
I wish to sell my 2008 MacBook Pro. Have erased hard disk and when I went to fresh instal Mavericks OSX 10.6 (it gives me no other choice in the disk utility program) It says in the Apple Store, it is unavailable. But because this is done from disk utility there is no operating system or access to choose another OS eg Yosemite. I cannot download anything using my iMac as that came ready loaded with Yosemite, so it does not show as a purchase. I do not want to use the Time Machine backup as that has all my details, apps etc. in it. Would the best way be to purchase a disk containing Mavericks the OS that was on it most recently. Can anyone offer advice please?
You need to re-install the OS the computer shipped with using the disks that were supplied with the computer. Contact Apple Support and have the serial number of your computer available. They will send you new disks for a small fee.
Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support -
Cannot execute Install for database ORACLE_HOME
Dear ALl,
EBS 11.5.9 with Windows 2003, during multi-node installation error.
log file
Oracle Applications Rapid Install Wizard Install log
>> Using Rapid Wizard Version : 11.5.9.21
>> Install session started : Fri Jul 25 17:41:05 GST 2008
>> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
>> Command Line arguments for this execution :
=================================================================
Install Session Information
Host Name : sysd.apps.com
Host Operating System : Windows 2000
User running Install : applmgr
=================================================================
InstUpgPanel - User chooses to Install Oracle Applications
NumNodesPanel - Multi-node Selected
SIDSeedPanel - The PROD database is set to PROD fresh install database
ProductPanel - The following are the selected Product Groups for instance PROD
Basic
E-Business Intelligence
Marketing
TeleSales
Field Sales
Order Management
Inventory Management
Purchasing
Discrete Manufacturing
Process Manufacturing
TeleService
Service Contracts
Project Costing
Project Billing
Financials
Human Resources
ProductPanel - The following are the selected Product for instance PROD
0
160
190
265
601
174
175
690
874
709
454
452
450
558
451
530
517
520
549
670
691
882
521
676
880
696
697
660
522
544
869
676
279
697
660
702
401
665
673
401
665
201
202
250
401
702
703
704
705
706
712
550
551
552
553
554
555
556
557
514
511
542
862
696
872
170
866
518
515
510
870
524
542
275
275
101
140
200
222
240
260
600
8400
8401
8450
8901
231
673
800
804
8301
8302
TerritoryPanel - The following are the selected settings for instance PROD
LanguagePanel - The following are the selections from the Language Panel:
US - American_English
US - American_English
US7ASCII
US7ASCII
AMERICA
MultiNodePanel - Selected nodes:
[Ljava.lang.String;@eddac
[Ljava.lang.String;@7b7565
[[Z@583cf4
QuickPanel - Empty Fields were encountered. Number of empty Fields:1
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
C:\mksnt
C:\VC98
C:\java\jdk1.3.1
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME created:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory created:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory created:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.apps.com
Ping request could not find host sysm.apps.com. Please check the name and try again.
Error - host.domain ping has returned an error: 1
System variable PATH set to:
C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
QuickPanel - The following are the selected top directories for instance PROD
e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
apps.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
MountsPanel - The following are the mount points selected by the user for instance PROD
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
e:\oracle\prodappl
US7ASCII
US-ASCII
e:\oracle\prodcomn
e:\oracle\proddb\9.2.0
e:\oracle\prodora\8.0.6
e:\oracle\prodora\iAS
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
f:\oracle\proddata
e:\oracle\prodcomn\java
e:\oracle\prodcomn\portal
e:\oracle\prodcomn\util\jre\1.1.8
e:\oracle\prodcomn\temp
applmgr
password
appsa.com
d:\MKS\mksnt
d:\VC98
C:\jdk1.3.1_06
c:\Program Files\Oracle\Inventory
SettingsPanel - The following are the selected settings for instance PROD
PROD
PROD
US7ASCII
AMERICA
1521
1626
7000
8000
8100
8200
8800
9000
9100
9200
9300
9800
10000
10100
10200
10300
16000-16009
17000-17009
18000-18019
19000-19009
AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
Port Availability Check :
Database Port Value = 1521...... Available
Operating System Check
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\applmgr\Application Data
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=SYSD
ComSpec=C:\WINDOWS\system32\cmd.exe
DISPLAY=:0.0
HOME=C:\Documents and Settings\applmgr
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\applmgr
include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
lib=D:\VC98\mfc\lib;D:\VC98\lib
LOGONSERVER=\\SYSD
MSDevDir=D:\VC98\MSDev98
NUMBER_OF_PROCESSORS=16
NUTCROOT=D:\MKS
OS=Windows_NT
Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f0b
ProgramFiles=C:\Program Files
PROMPT=$P$G
ROOTDIR=D:\MKS
SESSIONNAME=Console
SHELL=D:\MKS\mksnt\sh.exe
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TERM=nutc
TERMCAP=D:\MKS\etc\termcap
TERMINFO=D:\MKS\usr\lib\terminfo
TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
USERDOMAIN=SYSD
USERNAME=applmgr
USERPROFILE=C:\Documents and Settings\applmgr
windir=C:\WINDOWS
Operating System patch/version test has suceeded
Port Uniqueness Check :
All ports are unique.
File System Check :
Database ORACLE_HOME available:
Mount Point = e:\oracle\proddb\9.2.0
Database ORACLE_HOME admin folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil
Database ORACLE_HOME temp folder available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
Database Install Log Directory available:
Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
Database System File Directory available:
Mount Point = f:\oracle\proddata
Database Log File Directory available:
Mount Point = f:\oracle\proddata
Database Data File Directory available:
Mount Point = f:\oracle\proddata
Database Index File Directory available:
Mount Point = f:\oracle\proddata
File Space Check :
Disk space on system acceptable :
Database ORACLE_HOME = e:\oracle\proddb\9.2.0
required = 2381.0
actual = 102323.203125
Disk space on system acceptable :
Database System File Directory = f:\oracle\proddata
required = 9259.0
actual = 457021.93359375
Disk space on system acceptable :
Database Log File Directory = f:\oracle\proddata
required = 49.0
actual = 447762.93359375
Disk space on system acceptable :
Database Data File Directory = f:\oracle\proddata
required = 8175.0
actual = 447713.93359375
Disk space on system acceptable :
Database Index File Directory = f:\oracle\proddata
required = 6532.0
actual = 439538.93359375
Host/Domain Check :
command : ping -n 1 sysd
Pinging sysd [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysd.apps.com
Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.16:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host.domain ping has suceeded
command : ping -n 1 sysm
Pinging sysm [192.168.6.17] with 32 bytes of data:
Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
Ping statistics for 192.168.6.17:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
host ping has suceeded
command : ping -n 1 sysm.appsa.com
Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
Ping statistics for 208.87.33.150:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 295ms, Maximum = 295ms, Average = 295ms
host.domain ping has suceeded
System Utilities Check :
command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
Setting environment for using Microsoft Visual C++ tools.
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
d:\MKS\mksnt/cc.exe
'cc' is available.
D:\VC98\BIN/link.exe
'link' is available.
ERRORCODE = 0 ERRORCODE_END
System Utilities Availability test has suceeded
JDK Availability Check :
running command : CheckerClass.JDKCheck()
JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
DoInstallPanel - Summary Text
The Rapid Install Wizard will now install the following:
Install Oracle 9i technology stack for PROD.
Install Oracle Applications Database Seed for PROD.
DoInstallPanel - User continued install at warning dialog.
DoInstallPanel - Beginning install for all users.
Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
APPL_TOP location: e:\oracle\prodappl
Database ORACLE_HOME: e:\oracle\proddb\9.2.0
Database SID: PROD
Database Context Name : PROD_sysd
Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
instantiate file:
source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Total number of processes in Current Install 3
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
"Database ORACLE_HOME installation succeeded"
e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
"Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
Please specify valid number of threads. [1-12]
usage:
java oracle.apps.ad.autoconfig.InstantiateFile
-e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
[-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
[-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
java oracle.apps.ad.autoconfig.InstantiateFile
-name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
where:
ENV_FILE = Applications Context file to provide replacement vars
INST_DRV = Instantion File Driver to define templates to be instantiated
TEMPLATE = Template to be instantiated
LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
BACKDIR = The directory for backing up previous templates
(default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
OUTFILE = Output file
PASSWORD = APPS password
VAR_NAME = A variable name to be replaced
VAR_VALUE = The value pair to VAR_NAME
NUMBER = Number of threads to be used in the zip action. Range [1-20]
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Please guide.Hi,
Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
"Cannot execute Install for database ORACLE_HOME"
C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
Error - script has returned an error: 1
Error Code received when running external process. Check log file for details.
Running Database Install Driver for PROD instance
Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
Invalid target file name in driver file: <s_com>\admin\out
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
instantiate file:
source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
Step 0 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
Processing Step 1 of 3
Step 1 of 3
Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
Processing Step 2 of 3
Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
------------------------------------------ -
Yosemite fresh install - an idea I am trying
I Upgraded Yosemite on my MBAIR mid 2013 and Al has worked. I did this as an early adopter the moment it appeared on the App Store.
HOwever ver it does seem slow and dropbox has Ben malfunctioning for three months despite copious support. Other things don't seem right either, like there is a an unfriendly ghost in the machine. So I google that a fresh install while not required may be desirable.
I Find that like all things tech mostly it works and sometimes it does not: other threads on here confirm this; extremes of experience good and bad.
I Have these same experiences. Including time machine backups that even a Genius cannot fix. You can imagine my reaction after al the exhortations to backup to/with time machine. Apparently one faulty folder meant the entire backup was lost.
I have too many tears and years of experience really still to use technology.
So the challenge is how to create a fresh install, to add all my setup, vast number of apps, test it and without resorting to time machine backups ( of which I have FOUR, two external disks and two NAS drives ) plus drop box and additional NAS drive sync (synology drives x 2 about 50 terabytes as one backs up the other) - imagine losing your NAS drive, regret drive two is not offsite, though in a different room)
I Am not convinced my dropbox is accurate nor my NAS sync: one reason for the fresh install.
SOlution I have "in play" is this and interested to hear guidance from experience:
UsB drive, erased with single write of zeroes, partitioned to journaled mac format. Partition about 650gb for MBAIR has 500gB SSD OEM.
Rstart MBAIR pressing command R , follow process choosing EXTERNAL drive to install Yosemite
and after overnight wait for the disk prep process zeroing, now at the point of having installed and asking for my applied. Do I give it or keep it 100% clean while I check the basic install works...... I elect for no sign in..... I want to know if the USB based system works and can reboot. Restarting... I altered password so I can tell which system I have booted from... 70 seconds to the password box....5 seconds from password to main screen...
SO now what? Install apps? So many. The ones I forget will plague me for days or weeks. Or transfer from time machine like its a new machine?
TTime to post this and see if anyone is around with some experience
AApologies for the typing, my iPad is not behaving ideally...can't edit the above and my ipad would not allow any responses to the post edit dialogues so to continue with what I hope does not become an epic
my name is anthony, please ignore the handle (old long story - maybe one day I can easily fix it)
my first choice was to load mail.app enter my apple i.d., then system prefs icloud and tick the keychain box. There followed repetitive "certificates do not match - choose trust all, around 30 times over once for each email account (I have many). Also enter system password, note to self next time make system password blank for install process. Doing this now for the rest of the process. Yes I am sure (response to a prompt)
So, email has re-installed all (?) of my email accounts with settings (thanks to icloud methinks) saving a huge amount of time compared to past re-installs (thank you icloud) and downloaded 42,000 messages (nearly all imap so as to sync across devices) - I feel a degree of relief already and do not feel that terrible stress feeling when all I have is a backup and no original working system (which is of course still on the MBA's SSD).
When asked about time machine targets: ignore/cancel so as not to interfere with original MBA backups.
Next (concurrently in fact) install Chrome to get back all my bookmarks (thousands). I occasionally try Safari, but struggle because of my time investment in Chrome and it doesn't integrate, imports are not at all the same thing.)
So let's try a restart and compare the timings. ... this is without any apps being reinstalled (as opposed to browser)... -
Very slow Mac, compared to when running a fresh install
I was wondering if anyone could help me diagnose the reason for my mac being so slow. (Eg 1.5-3 minute boot up as opposed to 15-20 seconds) And why it takes a long time to load a lot of things. I have restored this from a time machine partition, so I believe something has transferred over incorrectly resulting in this general sluggishness of the system.
I have tried disabling all Startup items, disconnecting all external devices, but to no real success.
Here's the boot log of the system below, where I've noticed it hangs after posting FIPS success.
I was wondering if anyone could point me to any of the things that look suspicious? I've tried, but I haven't been able to find out what is causing it, as I believe the process that is causing this sluggishnesh begins at startup.
30/05/13 4:24:10.000 PM bootlog[0]: BOOT_TIME 1369895050 0
30/05/13 4:24:25.000 PM kernel[0]: PMAP: PCID enabled
30/05/13 4:24:25.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
30/05/13 4:24:25.000 PM kernel[0]: vm_page_bootstrap: 1993882 free pages and 86886 wired pages
30/05/13 4:24:25.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
30/05/13 4:24:25.000 PM kernel[0]: zone leak detection enabled
30/05/13 4:24:25.000 PM kernel[0]: standard timeslicing quantum is 10000 us
30/05/13 4:24:25.000 PM kernel[0]: standard background quantum is 2500 us
30/05/13 4:24:25.000 PM kernel[0]: mig_table_max_displ = 74
30/05/13 4:24:11.661 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
30/05/13 4:24:25.000 PM kernel[0]: TSC Deadline Timer supported and enabled
30/05/13 4:24:25.000 PM kernel[0]: corecrypto kext started!
30/05/13 4:24:25.000 PM kernel[0]: Running kernel space in FIPS MODE
30/05/13 4:24:25.000 PM kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
30/05/13 4:24:11.664 PM com.apple.launchd[1]: *** Verbose boot, will log to /dev/console. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
30/05/13 4:24:11.667 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
30/05/13 4:24:25.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
30/05/13 4:24:24.316 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Sandbox
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/05/13 4:24:25.000 PM kernel[0]: calling mpo_policy_init for Quarantine
30/05/13 4:24:25.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
30/05/13 4:24:25.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
30/05/13 4:24:25.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
30/05/13 4:24:25.000 PM kernel[0]: MAC Framework successfully initialized
30/05/13 4:24:25.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
30/05/13 4:24:25.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
30/05/13 4:24:25.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1223PFM64 (36 cpu) 0xf80000000, 0x80000000
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration begin ]
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
30/05/13 4:24:25.000 PM kernel[0]: console relocated to 0xfc0010000
30/05/13 4:24:25.000 PM kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
30/05/13 4:24:25.000 PM kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
30/05/13 4:24:25.000 PM kernel[0]: Thunderbolt runtime power conservation disabled.
30/05/13 4:24:25.000 PM kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
30/05/13 4:24:25.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
30/05/13 4:24:25.000 PM kernel[0]: rooting via boot-uuid from /chosen: 9DADC387-C048-3E67-AFB3-3344605810FC
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
30/05/13 4:24:25.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
30/05/13 4:24:25.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
30/05/13 4:24:25.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/05/13 4:24:25.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe912174; max speed s800.
30/05/13 4:24:25.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST31000528AS Media/IOGUIDPartitionScheme/Macintosh HD@2
30/05/13 4:24:25.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 1
30/05/13 4:24:25.000 PM kernel[0]: Kernel is LP64
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
30/05/13 4:24:25.000 PM kernel[0]: USBMSC Identifier (non-unique): MY69FD72DY04KS 0x3f0 0x5a11 0x100
30/05/13 4:24:25.000 PM kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.297317: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
30/05/13 4:24:25.000 PM kernel[0]: 1.303430: Atheros: mac 448.3 phy 342.14 radio 0.0
30/05/13 4:24:25.000 PM kernel[0]: 1.304325: Use hw queue 0 for WME_AC_BE traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.305204: Use hw queue 1 for WME_AC_BK traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306047: Use hw queue 2 for WME_AC_VI traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.306882: Use hw queue 3 for WME_AC_VO traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.307725: Use hw queue 8 for CAB traffic
30/05/13 4:24:25.000 PM kernel[0]: 1.308463: Use hw queue 9 for beacons
30/05/13 4:24:25.000 PM kernel[0]: 1.309205: wlan_vap_create : enter. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1
30/05/13 4:24:25.000 PM kernel[0]: 1.310853: wlan_vap_create : exit. devhandle=0xd9f3e658, opmode=IEEE80211_M_STA, flags=0x1.
30/05/13 4:24:27.000 PM kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:21:ba:13
30/05/13 4:24:27.000 PM kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:5f:b3:53
30/05/13 4:24:27.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/05/13 4:24:27.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe
30/05/13 4:24:33.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
30/05/13 4:24:33.000 PM kernel[0]: Previous Shutdown Cause: 5
30/05/13 4:24:33.000 PM kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
30/05/13 4:24:33.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
30/05/13 4:24:33.317 PM hidd[48]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
30/05/13 4:24:33.863 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.864 PM cfprefsd[21]: CFPreferences failed to read preferences data. Errno was 21
30/05/13 4:24:33.971 PM mDNSResponder[39]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
30/05/13 4:24:34.000 PM kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
30/05/13 4:24:34.000 PM kernel[0]: DSMOS has arrived
30/05/13 4:24:40.810 PM coreservicesd[62]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
30/05/13 4:24:40.836 PM blued[57]: Read the UHE Info
30/05/13 4:24:40.836 PM blued[57]: Read version 2 info. Number of devices:2
30/05/13 4:24:40.836 PM blued[57]: Class of device: 0x2580
30/05/13 4:24:40.836 PM blued[57]: Device name: 'My Mosse-Robinson’s Mouse' length:30
30/05/13 4:24:40.836 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.836 PM blued[57]: Found a device with PID:0x030d VID:0x05ac
30/05/13 4:24:40.837 PM blued[57]: Class of device: 0x2540
30/05/13 4:24:40.837 PM blued[57]: Device name: 'My Mosse-Robinson’s Keyboard' length:33
30/05/13 4:24:40.837 PM blued[57]: Finished reading the HID data
30/05/13 4:24:40.837 PM blued[57]: Found a device with PID:0x0239 VID:0x05ac
30/05/13 4:24:41.000 PM kernel[0]: macx_swapon SUCCESS
30/05/13 4:24:41.529 PM WindowServer[88]: Server is starting up
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.531 PM WindowServer[88]: Session 256 released (1 references)
30/05/13 4:24:41.538 PM WindowServer[88]: Session 256 retained (2 references)
30/05/13 4:24:41.538 PM WindowServer[88]: init_page_flip: page flip mode is on
30/05/13 4:24:41.538 PM WindowServer[88]: init_resolution: resolution is enabled
30/05/13 4:24:41.694 PM WindowServer[88]: mux_initialize: Couldn't find any matches
30/05/13 4:24:41.706 PM WindowServer[88]: GLCompositor enabled for tile size [256 x 256]
30/05/13 4:24:41.706 PM WindowServer[88]: CGXGLInitMipMap: mip map mode is on
30/05/13 4:24:41.733 PM WindowServer[88]: WSMachineUsesNewStyleMirroring: false
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.733 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.734 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x5 for display 0x042801c0
30/05/13 4:24:41.739 PM WindowServer[88]: Created shield window 0x6 for display 0x003f0040
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x7 for display 0x003f003f
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x8 for display 0x003f003e
30/05/13 4:24:41.740 PM WindowServer[88]: Created shield window 0x9 for display 0x003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: GL mask 0x1; bounds (0, 0)[2560 x 1440], 54 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a007, S/N 0, Unit 0, Rotation 0
UUID 0x000006100000a00700000000042801c0
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: GL mask 0x10; bounds (3584, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffff003f0040
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: GL mask 0x8; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffff003f003f
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: GL mask 0x4; bounds (3586, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffff003f003e
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003d: GL mask 0x2; bounds (3587, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffff003f003d
30/05/13 4:24:41.741 PM WindowServer[88]: CGXPerformInitialDisplayConfiguration
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; Vendor 0x610 Model 0xa007 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f0040: MappedDisplay Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.741 PM WindowServer[88]: Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.742 PM WindowServer[88]: Display 0x003f003d: MappedDisplay Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3587,0)[1 x 1], Rotation 0, Resolution 1
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, accelerator 0x0000481b, unit 0, caps QEX|QGL|MIPMAP, vram 1024 MB
30/05/13 4:24:41.896 PM WindowServer[88]: GLCompositor: GL renderer id 0x01021b05, GL mask 0x0000001f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
30/05/13 4:24:41.911 PM hidd[48]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
30/05/13 4:24:41.911 PM WindowServer[88]: Unable to open IOHIDSystem (e00002bd)
30/05/13 4:24:41.000 PM kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
30/05/13 4:24:42.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
30/05/13 4:24:43.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
30/05/13 4:24:43.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
30/05/13 4:24:43.372 PM com.apple.SecurityServer[15]: Session 100000 created
30/05/13 4:24:43.740 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:44.615 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.yVQnGnD to blued.plist, errno was 21.
30/05/13 4:24:44.902 PM WindowServer[88]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x042801c0 device: 0x101ed8a10 isBackBuffered: 1 numComp: 3 numDisp: 3
30/05/13 4:24:46.000 PM kernel[0]: NTFS driver 3.10 [Flags: R/W].
30/05/13 4:24:46.000 PM kernel[0]: NTFS volume name BOOTCAMP, version 3.1.
30/05/13 4:24:48.639 PM airportd[95]: _processDLILEvent: en1 attached (down)
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff801c6a2000
30/05/13 4:24:48.000 PM kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
30/05/13 4:24:48.765 PM com.apple.SecurityServer[15]: Entering service
30/05/13 4:24:48.821 PM awacsd[58]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
30/05/13 4:24:48.822 PM loginwindow[42]: Login Window Application Started
30/05/13 4:24:48.824 PM awacsd[58]: InnerStore CopyAllZones: no info in Dynamic Store
30/05/13 4:24:48.878 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
30/05/13 4:24:48.881 PM loginwindow[42]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:48.886 PM systemkeychain[75]: done file: /var/run/systemkeychaincheck.done
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2D_IPC: Loaded
30/05/13 4:24:48.906 PM mDNSResponder[39]: D2DInitialize succeeded
30/05/13 4:24:48.909 PM mDNSResponder[39]: Adding registration domain 167899042.members.btmm.icloud.com.
30/05/13 4:24:48.938 PM awacsd[58]: Configuring lazy AWACS client: 167899042.p04.members.btmm.icloud.com.
30/05/13 4:24:48.974 PM digest-service[114]: label: default
30/05/13 4:24:48.975 PM digest-service[114]: dbname: od:/Local/Default
30/05/13 4:24:48.975 PM digest-service[114]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:48.975 PM digest-service[114]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:48.976 PM digest-service[114]: digest-request: uid=0
30/05/13 4:24:48.993 PM rpcsvchost[118]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
30/05/13 4:24:48.995 PM digest-service[114]: digest-request: init request
30/05/13 4:24:48.998 PM digest-service[114]: digest-request: init return domain: BUILTIN server: LOCALHOST
30/05/13 4:24:49.008 PM aosnotifyd[119]: bootstrap_look_up failed (44e)
30/05/13 4:24:49.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:49.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:49.000 PM kernel[0]: 39.409929: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:49.000 PM kernel[0]: 39.409936: switchVap from 1 to 1
30/05/13 4:24:49.176 PM kdc[45]: label: default
30/05/13 4:24:49.176 PM kdc[45]: dbname: od:/Local/Default
30/05/13 4:24:49.177 PM kdc[45]: mkey_file: /var/db/krb5kdc/m-key
30/05/13 4:24:49.177 PM kdc[45]: acl_file: /var/db/krb5kdc/kadmind.acl
30/05/13 4:24:49.190 PM kdc[45]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
30/05/13 4:24:49.227 PM kdc[45]: KDC started
30/05/13 4:24:49.389 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
30/05/13 4:24:49.389 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:49.409 PM configd[17]: network changed: DNS*
30/05/13 4:24:49.410 PM configd[17]: setting hostname to "My-iMac.local"
30/05/13 4:24:49.000 PM kernel[0]: 40.066078: performCountryCodeOperation: Not connected, scan in progress[0]
30/05/13 4:24:49.000 PM kernel[0]: 40.068173: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:49.809 PM InternetSharing[46]: objc[46]: Object 0x7fcb18d007f0 of class __NSDictionaryM autoreleased with no pool in place - just leaking - break on objc_autoreleaseNoPool() to debug
30/05/13 4:24:49.829 PM com.apple.InternetSharing[46]: *** no interface for service
30/05/13 4:24:50.202 PM mds[38]: (Normal) FMW: FMW 0 0
30/05/13 4:24:50.369 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.tGGJbEu to blued.plist, errno was 21.
30/05/13 4:24:50.370 PM cfprefsd[21]: CFPreferences: error renaming file blued.plist.fqIWXwi to blued.plist, errno was 21.
30/05/13 4:24:50.652 PM appleeventsd[54]: main: Starting up
30/05/13 4:24:50.660 PM awacsd[58]: KV HTTP 0
30/05/13 4:24:51.219 PM locationd[43]: NOTICE,Location icon should now be in state 0
30/05/13 4:24:51.236 PM sudo[135]: root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 777 /dev/disk0s4
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:51.000 PM kernel[0]: en1: BSSID changed to 94:44:52:e5:e8:6e
30/05/13 4:24:51.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:51.000 PM kernel[0]: 42.397428: setWOW_PARAMETERS:wowevents = 2(1)
30/05/13 4:24:51.000 PM kernel[0]: AirPort: RSN handshake complete on en1
30/05/13 4:24:52.001 PM com.apple.usbmuxd[27]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
30/05/13 4:24:52.000 PM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,45e1,0000]
30/05/13 4:24:53.916 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:53.932 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.533 PM WindowServer[88]: Created shield window 0xa for display 0x042801c0
30/05/13 4:24:54.533 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.534 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.553 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:54.550 PM launchctl[142]: com.apple.findmymacmessenger: Already loaded
30/05/13 4:24:54.560 PM com.apple.SecurityServer[15]: Session 100003 created
30/05/13 4:24:54.795 PM airportd[95]: _doAutoJoin: Already associated to “Belkin-Wifi”. Bailing on auto-join.
30/05/13 4:24:54.796 PM hidd[48]: CGSShutdownServerConnections: Detaching application from window server
30/05/13 4:24:54.796 PM hidd[48]: CGSDisplayServerShutdown: Detaching display subsystem from window server
30/05/13 4:24:54.808 PM loginwindow[42]: Login Window Started Security Agent
30/05/13 4:24:54.863 PM fseventsd[49]: Logging disabled completely for device:1: /Volumes/Recovery HD
30/05/13 4:24:55.143 PM configd[17]: network changed: v4(en0+:192.168.2.180) DNS+ Proxy+ SMB
30/05/13 4:24:55.280 PM mds[38]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
30/05/13 4:24:55.000 PM kernel[0]: Sandbox: sandboxd(157) deny mach-lookup com.apple.coresymbolicationd
30/05/13 4:24:53.798 PM ntpd[112]: proto: precision = 1.000 usec
30/05/13 4:24:53.985 PM com.apple.InternetSharing[46]: InternetSharing: com.apple.InternetSharing.broadcast-0 has been started
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: BCAST is ready [en0, mtu=1500, 2 DNS server(s), 0 DNSv6 server(s)]
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: removed addr=fe80::e6ce:8fff:fe5f:b353 on en1
30/05/13 4:24:53.986 PM com.apple.InternetSharing[46]: added addr=192.168.3.1 mask=255.255.255.0 on bridge0
30/05/13 4:24:53.000 PM kernel[0]: 45.946953: Invoking setHOST_AP_MODE
30/05/13 4:24:53.000 PM kernel[0]: 45.946957: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 45.960195: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.960200: switchVap from 1 to 6
30/05/13 4:24:53.000 PM kernel[0]: 45.979212: osif_com_vap_event_handler vap delete event
30/05/13 4:24:53.000 PM kernel[0]: 45.979219: deleteVap ****SYNC VAP DELETE SUCCESS
30/05/13 4:24:53.000 PM kernel[0]: 45.982272: Invoking setRSN_CONF
30/05/13 4:24:53.000 PM kernel[0]: AirPort: Link Up on en1
30/05/13 4:24:53.000 PM kernel[0]: en1: BSSID changed to e4:ce:8f:5f:b3:53
30/05/13 4:24:53.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
30/05/13 4:24:53.000 PM kernel[0]: 46.007045: Invoking getKEY_RSC
30/05/13 4:24:53.000 PM kernel[0]: en1: promiscuous mode enable succeeded
30/05/13 4:24:53.000 PM kernel[0]: bridge_attach_protocol: en1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DNS subnet=192.168.3/24 on bridge0]
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[0]: 192.168.2.1
30/05/13 4:24:54.085 PM com.apple.InternetSharing[46]: dns[1]: 192.168.2.1
30/05/13 4:24:54.095 PM SecurityAgent[153]: This is the first run
30/05/13 4:24:54.095 PM SecurityAgent[153]: MacBuddy was run = 0
30/05/13 4:24:54.122 PM SecurityAgent[153]: User info context values set for My
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: com.apple.InternetSharing.broadcast-0 started: [DHCP subnet=192.168.3/24 on bridge0 mtu=1500 <---> en0 mtu=1500] max-mss=1460
30/05/13 4:24:54.178 PM com.apple.InternetSharing[46]: dns[0]: 192.168.3.1
30/05/13 4:24:54.309 PM com.apple.InternetSharing[46]: started "natpmpd"
30/05/13 4:24:54.457 PM loginwindow[42]: Login Window - Returned from Security Agent
30/05/13 4:24:54.459 PM loginwindow[42]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
30/05/13 4:24:54.484 PM loginwindow[42]: USER_PROCESS: 42 console
30/05/13 4:24:55.020 PM named[160]: starting BIND 9.8.3-P1 -c /etc/com.apple.named.proxy.conf -f
30/05/13 4:24:55.020 PM named[160]: built with '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--disable-dependency-tracking' '--prefix=/usr' '--sysconfdir=/private/etc' '--localstatedir=/private/var' '--enable-atomic=no' '--with-openssl=yes' '--with-gssapi=yes' '--enable-symtable=none' 'CC=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/u sr/bin/cc' 'CFLAGS=-arch i386 -arch x86_64 -g -Os -pipe -gdwarf-2 ' 'LDFLAGS=-arch i386 -arch x86_64 -framework IOKit -framework CoreFoundation' 'CXX=/Applications/Xcode.app/Contents/Developer/Toolchains/OSX10.8.xctoolchain/ usr/bin/c++' 'CXXFLAGS=-arch i386 -arch x86_64 -g -Os -pipe '
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.020 PM named[160]: BIND 9 is maintained by Internet Systems Consortium,
30/05/13 4:24:55.020 PM named[160]: Inc. (ISC), a non-profit 501(c)(3) public-benefit
30/05/13 4:24:55.020 PM named[160]: corporation. Support and training for BIND 9 are
30/05/13 4:24:55.020 PM named[160]: available at https://www.isc.org/support
30/05/13 4:24:55.020 PM named[160]: ----------------------------------------------------
30/05/13 4:24:55.587 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:55.587 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:55.897 PM com.apple.launchd[1]: (com.apple.xprotectupdater[25]) Exited with code: 252
30/05/13 4:24:55.989 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.000 PM kernel[0]: utun_ctl_connect: creating interface utun0
30/05/13 4:24:56.169 PM named[160]: running
30/05/13 4:24:56.170 PM UserEventAgent[143]: cannot find useragent 1102
30/05/13 4:24:56.171 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: UserName
30/05/13 4:24:56.237 PM com.apple.launchd.peruser.501[164]: (com.apple.gamed) Ignored this key: GroupName
30/05/13 4:24:56.238 PM com.apple.launchd.peruser.501[164]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
30/05/13 4:24:56.241 PM loginwindow[42]: Connection with distnoted server was invalidated
30/05/13 4:24:56.249 PM distnoted[168]: # distnote server agent absolute time: 48.352954504 civil time: Thu May 30 16:24:56 2013 pid: 168 uid: 501 root: no
30/05/13 4:24:56.526 PM blued[57]: kBTXPCUpdateUserPreferences gConsoleUserUID = 501
30/05/13 4:24:56.664 PM WindowServer[88]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
30/05/13 4:24:57.425 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:24:58.103 PM BezelServices 236.3[42]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
30/05/13 4:24:58.105 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationReady to notificationID=116
30/05/13 4:24:58.122 PM WindowServer[88]: Display 0x042801c0: MappedDisplay Unit 0; ColorProfile { 2, "iMac"}; TransferFormula (1.000000, 1.000000, 1.000000)
30/05/13 4:24:58.278 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:24:58.278 PM configd[17]: DHCP en1: INIT-REBOOT transmit failed
30/05/13 4:24:58.751 PM com.apple.launchd.peruser.501[164]: (com.apple.afpstat-qfa[211]) Exited with code: 2
30/05/13 4:24:58.835 PM NetworkBrowserAgent[217]: Starting NetworkBrowserAgent
30/05/13 4:24:59.684 PM bootpd[161]: server name My-iMac.local
30/05/13 4:24:59.684 PM bootpd[161]: interface en0: ip 192.168.2.180 mask 255.255.255.0
30/05/13 4:24:59.684 PM bootpd[161]: interface bridge0: ip 192.168.3.1 mask 255.255.255.0
30/05/13 4:25:00.083 PM bootpd[161]: service time 0.000010 seconds
30/05/13 4:25:00.395 PM com.apple.launchd.peruser.501[164]: (com.apple.mrt.uiagent[201]) Exited with code: 255
30/05/13 4:25:00.894 PM fseventsd[49]: check_vol_last_mod_time:XXX failed to get mount time (25; &mount_time == 0x10d075518)
30/05/13 4:25:00.894 PM fseventsd[49]: log dir: /Volumes/External/.fseventsd getting new uuid: 1977A513-201A-4A9B-8A40-AB9A585F82AB
30/05/13 4:25:01.093 PM mDNSResponderHelper[74]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:02.998 PM apsd[60]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
30/05/13 4:25:03.069 PM configd[17]: inet_set_autoaddr(en1, 1) failed, Resource busy (16)
30/05/13 4:25:03.069 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:03.069 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.125 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:04.171 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:04.171 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:04.584 PM GrowlLauncher[195]: Launching Growl at URL: file://localhost/Applications/Growl.app/Contents/MacOS/Growl
30/05/13 4:25:06.238 PM com.apple.SecurityServer[15]: Session 100005 created
30/05/13 4:25:06.302 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:06.302 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.699 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:10.699 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:10.886 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:11.000 PM kernel[0]: 62.766797: osif_connect_event: sta: d8:a2:5e:53:4d:68 arrive message posted
30/05/13 4:25:11.000 PM kernel[0]: 62.783435: Invoking setSTA_AUTHORIZE
30/05/13 4:25:12.321 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:12.321 PM bootpd[161]: service time 1.602424 seconds
30/05/13 4:25:12.321 PM bootpd[161]: DHCP REQUEST [bridge0]: 1,d8:a2:5e:53:4d:68 <My-iPad>
30/05/13 4:25:13.253 PM bootpd[161]: ACK sent My-iPad 192.168.3.6 pktsize 300
30/05/13 4:25:13.253 PM bootpd[161]: service time 0.932620 seconds
30/05/13 4:25:14.366 PM coreservicesd[62]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationBirth to notificationID=115
30/05/13 4:25:14.818 PM mDNSResponder[39]: ERROR: handle_resolve_request bad interfaceIndex 5
30/05/13 4:25:14.818 PM com.apple.usbmuxd[27]: _BrowseReplyReceivedCallback (thread 0x7fff778fd180): Error doing DNSServiceResolve(): -65540
30/05/13 4:25:15.492 PM Growl[250]: Setup timer, this should only happen once
30/05/13 4:25:15.493 PM Growl[250]: Next image check no earlier than 24 hours from 2013-05-29 13:59:00 +0000
30/05/13 4:25:15.584 PM Image Capture Extension[253]: Another instance of 'Image Capture Extension' is already running! This instance is exiting.
30/05/13 4:25:15.585 PM com.apple.launchd.peruser.501[164]: ([0x0-0x17017].com.apple.ImageCaptureExtension2[253]) Exited with code: 1
30/05/13 4:25:15.585 PM HPScanner[230]: ERROR: Image Capture Extension went away!
30/05/13 4:25:16.174 PM com.apple.launchd[1]: (com.apple.coreservices.appleid.authentication[147]) Exit timeout elapsed (20 seconds). Killing
30/05/13 4:25:18.125 PM WindowServer[88]: disable_update_likely_unbalanced: UI updates still disabled by application "SystemUIServer" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
30/05/13 4:25:19.620 PM configd[17]: bootp_session_transmit: bpf_write(en1) failed: Device not configured (6)
30/05/13 4:25:19.620 PM configd[17]: DHCP en1: INIT transmit failed
30/05/13 4:25:20.909 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 17.78 seconds (server forcibly re-enabled them after 1.00 seconds)
30/05/13 4:25:21.195 PM BetterSnapTool[237]: kCGErrorIllegalArgument: CGSUnregisterWindowWithSystemStatusBar: Invalid window
30/05/13 4:25:21.225 PM configd[17]: set_arp_linklocal(en1) SIOCARPIPLL 1 failed, Resource busy
30/05/13 4:25:21.228 PM configd[17]: network changed: v4(en0:192.168.2.180, en1+:169.254.217.249) DNS Proxy SMB
30/05/13 4:25:21.664 PM UserEventAgent[11]: Captive: Online (HostAP mode)
30/05/13 4:25:21.667 PM configd[17]: network changed: v4(en0:192.168.2.180, en1) DNS Proxy SMB
30/05/13 4:25:21.859 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:22.003 PM named[160]: Warning: 'empty-zones-enable/disable-empty-zone' not set: disabling RFC 1918 empty zones
30/05/13 4:25:25.674 PM mDNSResponderHelper[259]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
30/05/13 4:25:26.937 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:29.935 PM named[160]: client 192.168.3.6#63922: error sending response: host unreachable
30/05/13 4:25:31.946 PM com.apple.SecurityServer[15]: Session 100009 created
30/05/13 4:25:32.086 PM WindowServer[88]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
30/05/13 4:25:32.268 PM WindowServer[88]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.18 seconds (server forcibly re-enabled them after 1.00 seconds)1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists. -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
Maybe you are looking for
-
External hard drive not recognised after using disk utility to format
i formatted two external hard drives using disk utility on my mac mini, now they do not show in finder. they can be seen in disk utility but the repair options etc are greyed out?
-
How can I get rid of a green vertical line (edge of text box) when I export as jpeg?
It just won't go away. Can you help?
-
Num_1099, individual_1099 columns in ap_suppliers
We are on Oracle EBS 12.1.3. In supplier screen there are two places where user can enter tax number. One is by clicking on "Tax and Reporting" page and other location is "Tax and Financial Information" section under Organization page. Based on where
-
Hello, Any guidance or help is appreciated. Looking at performing a File Host Scan/Check for MACs and have not seen any exemples for file path. Windows file check is easy and straightforward. In a MAC, let's say we create a text file and place that i
-
Just new to Firefox. Installed these plugins/add ons. When installed SEO Quake saw this displayed in a tab at top of window. However, when installed the other plugins none of them appeared anywhere. I haven't got a clue as to how I display/show them