Cannot generate 4' x 8' banner proof due to Memory Error
My system info:
Windows XP
Illustrator CS2 (legit, not bootleg copy)
2.8 Ghz processor
2.5 Gigs RAM
C: is 80 Gig with 40 Gigs free
F: is 700 Gig HD with 600Gigs Free
I designed a 4' x 8' banner from scratch in Illustrator.
The file is 12.6 MB in size.
I want to export the file so I can send to the client to proof. When I try and export as JPG, PSD or Save for Web, I receive the Out of Memory Error.
The ONLY way around this error that I can figure out is to do a screenprint but sadly, that is a low resolution at 96dpi. I was really hoping to send him something like a 1024 x 768 image at 300dpi.
I have rebooted my computer to clear the memory and only opened the Illustrator file and still receive the error.
Any suggestions other than Upgrade to Illustrator CS5? I rarely have clients that need banners created. I mainly use Illustrator for logo design.
I can probably Resize the image to something much smaller than 4' x 8' and export at that size. I'll try that in a sec and post my results.
Thanks in advance for any suggestions.
Thx everyone...
Wade, I tried to open the illustrator in PS but it is probably going to take an hour to rasterize. LOL
Craig, yes, I'm working on a 4' x 8' canvas. I see what you are saying about working with a smaller proportional document. Let's say I'm finished with the artwork and ready to export as a 4' x 8'. What is the best way to do that? Would you open it in PS and just set the dimensions and resolution you want it to raster at? I've never really thought of doing it that way (then again, I've only designed 3 - 4 banners too).
I use GRprint.com for my banners. I just read on their site, "Banners must be done at actual size. When submitting a rasterized image please have it at 100 DPI. No bleed is required for banners." That may help a bit since I don't have to print at 300dpi. I just opened the Illustrator in PS at 100dpi and it worked great! That's exactly what I needed.
John, I originally tried that but it goofed up one of the effects I had added. I even used the "scale stroke and effects" box.
You guys rock!
Similar Messages
-
HT4972 what if i cannot update my device to ios 5 due to connection error?
what if i cannot update my device to ios 5 due to connection error?
If you ae getting a network timeout error, disable the computer's antivirus and firewall during hte download and update.
-
TS1424 Cannot lock you on to your account due to 5002 error
Cannot lock you on to your account due to 5002 error
Preventive solution is to reinstall Windows as a lot of files are corrupted, as you say. Cure is to run SFC/create a new user account. Also, make sure the PCs are free from any malware infection.
Personally, it's a good practice to perform clean install every 6 months or 12 months, after backing up important files, to maintain stability. This is because, with usage over time, a lot of temporary files get congested, in conventional HDD type fragmentation
increases and errors raise in registry which Windows is not capable of cleaning by itself. Of course, in a corporate scenario, clean installation may not be possible with a large number of PCs. Therefore, imaging a clean installed Windows and restoring it
across other PCs is an efficient solution.
Balaji Kundalam -
The BEx Analyzer cannot generate VBA code due to the security settings
Hello experts,
when I try to open a query in BEx Analyser I get this error message for each Item of the Query:
Diagnosis
The BEx Analyzer cannot generate VBA code due to the security settings.
System Response
VBA code is not generated.
Procedure
Choose Tools -> Macro -> Security.
On the Trusted Publishers tab page, select Trust access to Visual Basic project.
Choose OK.
Close the BEx Analyzer and continue working as before.
Access to Visual Basic project is only needed when generating VBA code.
This only takes place in design mode or when 3.x workbooks are upgraded.
Of course I did exactly what was recommanded in the "procedure-section" of this error message. But BEx ist still not working!
I use SAP NetWeaver 7.0 together with MS Excel 2007
Thanks
AxelHello experts,
I am an additional person interested in the way this issue was solved.
I confirm that the issue is coming from the SP2 of Microsoft Office (I have another environnement without the SP2 and everything works well), and I am in a situation where I can't remove the update.
Regards
Guillaume P.
EDIT :
Solution found : I applied the bi710sp10p_1001-10004472.exe patch
(downloaded via the download maanger : Support Packages and Patches - Entry by Application Group" SAP Frontend Components" BI ADDON FOR SAP GUI" BI 7.0 ADDON FOR SAP GUI 7.10)
Edited by: GUILLAUME PETIAUX on Apr 13, 2010 10:29 AM -
I cannot generate a Key to Sync between two computers. Manage Account menu doesn't show under Options > Sync > Firefox Sync Setup > I already have a Firefox Sync Account > I don't have the Device with me. No Sync Key no matter how hard I tried.
Yes I did. '''''I solved this issue last night.''''' First I had to Clear My Sync Data, then Yes I Already Have a Sync Account [enter User, Password] and only then the Key appeared in its proper field. Went to the 2nd computer and wrote down the Key after I Already Have a Sync Account. The bottleneck was to enter into Mozilla server after resetting pass and user, and then, clear data.
-
Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.
-
HT201210 cannot complete rebooting of my iphone 5 due to error code 9
cannot complete rebooting of my iphone 5 due to error code 9....plz help
Hello don muchie,
The following article provdies some useful troubleshooting steps that can help get your iPhone to work correctly with your computer.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
Does anyone have an idea if the WSDL is wrong or if it's an XI problem?
thanks
Johann Marty
TeamWork Management SA
Geneva
Cannot generate proxy (object missing in WSDL, see long text)
Message no. SPRX084
Background
During proxy generation, an interface description in WSDL format is fetched from the Integration Builder or another source and interpreted. This WSDL document must describe the whole interface correctly.
==> Display WSDL Document
Diagnosis
In the WSDL document, the object
"<message name="existDocument"> <part name="invo..."
from the namespace
"http://tempuri.org/"
links to the object
from the namespace
However, this last object does not exist in the WSDL document.
System response
ABAP proxy generation expects that all directly and indirectly referenced objects are in the WSDL document. Therefore, no proxy can be generated for this WSDL and the system displays an error message.
Procedure
This situation can have different causes:
Object "" not been defined
Object "" saved in the wrong namespace
In the reference to object "", the wrong name was specified
In the reference to object "", the wrong namespace "" was specified
Internal error in the service that constructs the WSDL document
Internal error in ABAP proxy generationHi,
Just cross check with your configuration details.
Also try to recreate the proxy and activate it.-
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Regards,
Moorthy -
TS1368 itunes cannot detect iphone due to the error 0xE8000012
itunes cannot detect iphone due to the error 0xE8000012
For windows read http://support.apple.com/kb/TS1538
For mac read http://support.apple.com/kb/ts1591 -
Portlet cannot be displayed due to unknown error
In our application we are getting Error, "portlet cannot be displayed due to unknown error" from ALUI portal. There is no enough informaiton apart from this. This error is not consistent, can happen any time.
Can you please advice what could be the cause?
Thanks,Start the "BEA Ali Logger service" on your portal server machine. Then when the problem occurs you can analyze \bea\alui\ptlogging\logs\portal\portalserver-log.spy to find out more information about what might be causing the problem. You can also set up a wireshark network capture log using the ringbuffer mode which lets you collect logs in a loop. This way if there are network issues you can find out about that too. If you're not comfortable setting these up or analyzing them an oracle support engineer can assist you if you open a case.
-
TS3992 i cannot have a backup on itunes. it says cannot backup due to an error occured
When i connect my iphone to itunes, it says cannot backup due to an error occured.. This started happening all of a sudden.. Please find me a solution for this.. I really need a backup of the phone in my laptop.
ThanksHi Simsan,
If you are having an issue backing up your iPhone to iTunes, you may want to take a look at the following article:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
- Brenden -
ITunes Cannot connect to iPhone due to unknown error (0xE8000065)
Hello!
When I plugin my iphone to a wall, it refuses to charge (it just keeps making a bleeping noise).
And when I try to connect my iPhone to iTunes, I can't. It just says: iTunes Cannot connect to iPhone due to unknown error (0xE8000065)
Any suggestions? I replaced the battery hoping that would do the trick, but nada.
CheersiPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Did you try a different charger and a different cable? If it won't charge the error will go away soon also when the battery dies. -
Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
DimitriHi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing) -
Cannot generate .chm; no images are compiling.
Thank you in advance for any help. Here is the situation: I am using RoboHelp HTML, ver. 8 and have a project that I cannot generate a .chm file for. Each time I try it runs through the compiler, the output shows .htm files but no image files are included in the compiling process and I end up with a "Fatal Error: Unexpected error from Microsoft HTML compiler" message.
To generate the file I am going to: File, Generate, Primary Layout (Microsoft HTML Help). When I try to open the .chm file I get a message that says "Cannot open the file: mk:@MSITStore:C|(the directory I saved it to).
There are broken links which haven't been fixed yet but we would like to be able to still generate a .chm file so content can be reviewed. Is it possible to have a successful .chm file compiled if you have broken links?
Thank you again for any help!Hi,
I can't say I have a solution to your problem but I have run into similar situations. Unfortunately, I don't seem to have documented them anywhere...thus I will have to rely on my sketchy memory.
First though, I will respond with two points I am quite certain about:
- Having broken links in your project should not cause any generation problems other than the obvious missing links in the output CHM.
- You do not see any images in the compiling process because there is a problem earlier on in the html compilation part.
In my case, I had a project with a multi-level folder hierarchy. With longer filenames totalling a very large number of total characters in the full path, the project would take a very long time to build and, ultimately, I would end up with a "Fatal Error". IF you have a project with even a single instance of a very long full path, this could be the source of the problem. Keep in mind that during the compilation process the full file path is lengthened by the addition of the temporary folder in which the product is built, by default, in the !SSL! folder. My solution was to simply generate to an output folder at the top level e.g. C:\Output. It may, however, be the case that you would have to shorten some of your file/folder names.
In other cases, I could not find a culprit per se, but ended up deleting the .cpd, which is known to sometimes become corrupt. Upon opening the project again, a fresh .cpd was built and the project ran without issue.
Obviously, if you try either of these suggestions, I highly recommend ensuring you have a backup if one does not already exist on a version control system. -
CUA: Cannot generate partner profile
Hi,
I´am implementing CUA in ower landscape. I have the RFC´s and users with their specific roles in Central and child systems, but also I´ve registered the logical systems in BD54 both parts. I had no problems with this SAP process .
Recently I began to add a new child system(CRM 7.0) when I save this in tx:SCUA all the steps are ok but the message: "Cannot generate partner profile" appears in the last step. I have reviwed users, roles, RFC´s and logical systems, all is OK.
I was looking FOR some information about partner profiles:
http://help.sap.com/saphelp_nw70/helpdata/en/ea/9abf3b4f995f1ce10000000a114084/frameset.htm
and I found that partner profiles type LS are managed by tx:we20.
I found in child system that partner profile CRDCLNT100 alredy exist, this is what the SCUA wants to go to create.
I found also in child system that in transaction BD64 there is not any CUA entry.
Do you know how to solve this problem.
Thanks in advance
Enrique.Hi Enrique.,
you have not generated partener profile.
Go to BD64 in your parent system then click on change ->Add BAPI then enter the required details.
there is one field obj.name/reference enter details for both object one by one.
first for user and click on ok and then for usercompany then click on save.
Go to environment menu then click on generate partener profile then click on execute and all must be in green.
After that go to EDIT menu->Model view->distribute select the child system which you want to add and then click ok.
If you have multiple client then do same steps for all client.
After that add system to SCUA.
Regards
Arti
Maybe you are looking for
-
Hi Friends, I have a question regarding consignment issue. During the consignment fill up I have entered a material (machine) that is configurable and also assigned a serial number to it. Now when I try to create an order (consignment issue)
-
Bup, dat, ifo, vob formats- how can I read these files?
Hi- I have a MBP running Leopard and have a DVD of my grandson in utero that I want to play on my computer but these formats are not recognized by iDVD. Any ideas of what I can do? I am stumped. Thanks, Judy
-
How can I view photos I downloaded 2-3 years ago and which suddenly seem to have disappeared. Only photos taken within the past 12 months are visible.
-
PM-WCM Work Clearance Management transactions vu00EDa Web Dynpro
Hi All, We are facing the task of exposing WCM functionality vía Web using Web Dynpro. WD Java needs RFC functions to access ERP data. We have some problems because there is no API (SE37 RFC Function Modules) for WCM objects. There are some function
-
I'm running TestStand in conjunction with LabVIEW on a PXI/SCXI system. I experience DAQmx Error 88709 only when running my TestStand sequence file the first time after all equipment has been powered down. For all subsequent executions of the TestS