Cannot get a menu. Get a green blank screen
I cannot get a menu when I try to set up its. Just get a blank green screen that changes to black and green again.
Try holding menu and up arrow on remote for 6 secs to start cycling display resolutions.
Similar Messages
-
I'm on a PC and cannot get the menu bar up (0n the screen)?
I followed the directions (of apple) but still can't get the menu bar up on my PC
roger-59 wrote:
I don't have Creative Cloud on my computer. I received the program from Adobe and it was an upgrade.
This link may be helpful:
http://www.davidmarx.com/how-to-upgrade-to-adobe-photoshop-lightroom-6-for-the-current-lig htroom-user/
During the LR6 Upgrade installation you should have been asked to create an Adobe ID, which is used to activate your LR6 installation. This done via the Internet, but exactly how I can't say. Did you create an Adobe ID? If so try the following:
roger-59 wrote:
I don't know where the SL Cache or SL Store folders are located.
Please look use the instructions for Solution #2, which I've copied below. Makes sure to first close all applications.
Solution 2: Rename SLCache and SLStore folders
Rename the SLCache folder to SLCacheold, present at the following location:
Windows: C:\Program Files (x86)\Common Files\Adobe
Mac: System Library/Application Support/Adobe
Rename SLStore folder toSLStoreold, present at following location:
Windows: C:\ProgramData\Adobe
Mac: System Library/Application Support/Adobe
Launch Lightroom and sign-in. -
Connecting a h.264 DVR security camera system to remote viewing through my ip address/port. This works with ie but not with firefox. On ie I get a similar tab "netvideo" and a window opens showing my DVR connection, cameras, and can operate all remotely. On Firefox I just get the "netvideo" tab but a white blank screen. The application needed to show/operate my DVR is missing from firefox. How can I make the connection operate with firefox? Seen somewhere that firefox is missing a cab for this?
Sorry, Mozilla doesn't support the patent-encumbered and royalty-encumbered H.264 standard, they support the OGG/Theodora and WebM free open source standards.
Microsoft has a H.264 plugin for Firefox, but it is for Windows7 not WinXP or Win Vista. <br />
http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin
There may be other H.264 Firefox plugins out there for WinXP, so do a Google search. Or maybe contact support for that DVR security system and see if they know of or have a Firefox plugin. -
Hi,
My Name is Pranav.
I am using i phone 4-s.
In my iphone when i go to app store > Updates, system showing me 10 updates but when i try to open this page, page is not getting open. Loader came up and then white blank screen is visible. Rest all Featured, Top Charts Genius and Search are working fine but updates page is not getting open.
Guys please help me out to sort this problem.
Thanks,
Pranav
[email protected]
+91-8460366331Looks O.K. to me Opens correctly in Firefox and Opera as a log-in page for Killer Content - Win7x64 Fx5.
I can't see any oddities in your plug-ins. It never hurts to clear any relevant cookies and your cache.
You could see how it goes in Safe Mode - Hold Shift key down as you double click on the Firefox icon>ignore the page that opens and continue. If the page opens you probably have a problem with extensions or themes and you should work through this -
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
A lot of things have been updated as well as Firefox and you could have a culprit or conflict. Next, if there is no improvement you could try disabling third party toolbars, and you should report back at this stage or if there has been early success.
Someone may come by with a more specific remedy. -
I have an ipod that when you turn it on all you get is a lit up white blank screen what do i do
i have an ipod touch when you turn it on the screen just lites up white with no words or anything what do i do
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Why can't I watch movie on iPhone I purchased.video stopped wifi is fine just can't watch movie I purchased from iTunes want a refund
There are a number of methods to contact iTunes Support when you have a problem with a purchase. You can try the 'report a problem' page to contact them : http://reportaproblem.apple.com
Or you can use this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
When I test my update page in the browser, all I get is a blank screen
I'm feeling like I live here. I just finished everything on the data entry part of my site. Everything worked. I made an addition to a table, went back to my update page, changed a menu/list from a list to menu, and now I just get in the browser is a blank screen. I know that it's something in the PHP, but I haven't been able to figure it out. Help (once again)!
As i poured over the code for the nth time, I discovered that when I rebuilt the page i inadvertently forgot to delete the first many lines of code that won't go away by just deleting items from the document window. Anyway, the caution is to remember that the code that precedes the DOCTYPE must be deleting in the code window. And IHOP, thanks.
-
When I launch the cloud app (windows 8.1) all i get is a blank screen.
When I launch adobe cloud app all i get when it launches is a blank screen. I have tried uninstalling and reinstalling from the adobe site and have also renamed the OOBE folder but to no avail.
What is wrong with the app. It was working fine until recently.
Thank you
KathyHello KathyT2013,
Please rename OOBE Folder from the following location:
Windows: [System drive]:\Users\[user name]\AppData\Local\Adobe\OOBE
Mac OS: /Users/[user name]/Library/Application Support/Adobe/OOBE folder
After renaming the OOBE folder please restart the machine and then launch the application once again.
Do let me know if it work or if it gives you any issues.
Thanks,
Ratandeep Arora -
Movies downloaded to my ipad are getting stuck and I get a blank screen
I donwload a couple episodes from a tv show, the first 3 episodes were great I saw them no problem, BUT then when I dowloaded the 4, I started watching and when it get to 75% of the episode stops, if I go back it gets stuck on the same part, then i get a blank screen and I have get out of the application if I get back on still the same blank screen, I downloaded the follwing episode from the same show and still the same problem.
I though that it could be space on the Ipad - I deleted some application and still the same problem....
I don't want to keep downloading and paying for something that is not working properly
This is only happening with I tunes - I'm able to watch ABC apps and Netflix...
Can you help me?Have you tried copying them to your computer and seeing whether they play ok on your computer's iTunes, in case the download itself is corrupt ?
If the Videos app is still stuck, then try searching for the name of one of the videos on the iPad's spotlight search screen - swipe your first homescreen to the right, type in it's name, and if it finds it tap on it to see if it plays.
If that doesn't work then try closing the Videos app completely : from the home screen (i.e.not with the Videos app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option if the two above don't work is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
on my iPhone 4, I can't get mail. THere is a blank screen, like it's stuck. I can see the "pad/pencil" in the lower right corner to start a new message, but that's it.
Any ideas?Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Try deleting and re-adding the account to the Phone. -
Will a new MotherBoard cure Blank Screen with blinking cursor?
Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
===========================================Stuck with Blank Screen with blinking cursor; ESC key couldn’t bring up Startup Menu; OS is not loading
Product Name: HP G62 237 CA Notebook PC
Short description of the problems:
--- Press ESC key couldn’t bring up Startup Menu when booting up
--- Blank screen with blinking cursor thereafter
--- Stuck here forever and OS is not loading
DETAILED INFORMATION:
Product Name and Operating System:
Model: HP G62 237 CA Notebook PC
O/S: Pre-loaded with Win 7 Home Prem
Processor: Pent. Dual-Core CPU T4500 2.30GHz
Memory: 4GB
BIOS Ver. (Insyde): F.17
System BOARD ID: 1484
Product #: WQ767UA#ABC
Product Config ID: 049C110000202710000020000
Problem History:
--- Used to have frequent BSOD (got fixed later because of faulty RAM that I suspected)
--- Window couldn’t be loaded
--- Window Repair and HP Recovery were tried but not functioning
--- OEM Hard Drive was then removed & formatted few times by using other computer
--- Hard Drive was then tested by other computer; it can be installed Win XP & Win 7
--- So, Hard Drive was eliminated from the suspect list
--- Replaced with other good RAM from other computers & put back the OEM Hard Drive to my HP G62; everything worked fine, such as: able to reinstall Win 7; listening to music files; got Internet to download latest BIOS from HP support site; connected to my 42 inched TV as my monitor; and even smoothly updated the BIOS from v.17 to v.37!
--- Also, able to receive Window Updates from the Internet; and seemed that all problems were nicely solved
--- Once I believe my system got stabilized; I went back to test the 2 supposedly problematic RAM to see whether they were both faulty or not, then the whole thing has turned around! Completely screwed me up until this moment …
--- After put back the problematic RAM, Window couldn’t be loaded …
--- With a few error messages… such as,
--- The file is possibly corrupt. The file header checksum does not match the computed checksum;
--- After the next reboot… an unexpected screen message showed up:
Intel ® Cantiga PCI Accelerated SVGA BIOS
Build Number: 1932 PC 14.34 11/11/2009 02:36:14
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright © 2000-2003 Intel Corp. All Rights Reserved.
--- After that, OS was not loading …
--- Press ESC key couldn’t bring up the Startup Menu during boot up
--- Blank screen with blinking cursor thereafter and seems stuck here forever
Procedures performed for troubleshooting:
Tried hard reset for more than 5 times (removed battery, AC adapter disconnected and then hold down the Power button for more than 60 secs) and tried reseating memory too; same result with Blank Screen with blinking cursor after each reboot.
Connected to an external monitor [Fn + F4/F5] to see whether there was any display, nothing has showed on the external monitor, it seemed that no connection established between the two.
Finally, took the long journey to follow the Service and Maintenance Guide of HP G62 to remove the CMOS battery for well over 15 minutes and put it back. But the result was again disappointed. Tried 4 times already. The latest error message is:
The CMOS checksum is invalid. The CMOS will be reset to the default configuration and will be rebooted. Please check your BIOS Setup options to see if they change.
CMOS Reset (502)
ENTER – Reboot the system
After this message, the same Blank Screen with blinking cursor came back. And pressing the ESC key couldn’t bring up Startup Menu when booting up …
Note: the fan is still running; the Power button is functioning but seems stuck here forever!
I’ve already carefully read this HP Support document titled “HP BIOS Application Selected is Corrupt or Missing”:
http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443485#N144
If really is the BIOS problems, then I will have the difficulties of updating a Window-based BIOS when I couldn’t even load Window!
(Note: Boot from USB has no point because right now I couldn’t change the boot sequence because the various “Startup Menu” options are not showing up!)
Secondly, I am still stuck with the Blank Screen with a blinking cursor after I passed the first screen of “Press the ESC key for Startup Menu” when re-booted again!
Thirdly, I have formatted my Hard Drive more than 3 times during the last few days for testing; I don’t have the OEM pre-loaded Win 7 with me anyone … and I don’t think I have the UEFI installed previously on my system. I did try hold down the Win Key + B with the most updated BIOS in the attached USB …, it came back with the same blank screen with a cursor blinking after reboot.
Note: the Blank Screen I’m experiencing right now is not completely black, in fact, there is background light from behind the screen and on each reboot, I can see the HP logo and the left corner message of: “Press ESC key for Startup Menu” … So, I suppose that my computer screen is not physically broken at least.
Requests:
Please explain to me that what are the problem areas and the root causes if is possible?
What steps or other tests can be done to make it work again?
Do you think replacing the entire MotherBoard can cure the Blank Screen with blinking cursor?
[Warranty: expired! I am the original purchaser & the end-user of this HP G62; acquired 2 years ago directly from a trustworthy source: staples (in Canada). Would HP Support still willing to service it for an extra charge?]
Thanks in advance for any suggestion and idea!
Owenson
=========================================== -
I had to erase my hard drive and then reinstall everything back from my passport external hard drive. Now my iPhoto edit is not working. I get a blank screen when I want to edit. The photos show up in the library but I cannot edit them. Help?
There are several possible causes for the Black Screen issue
*1. Permissions in the Library* : Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
*2. Minor Database corruption*: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
*3. A Damaged Photo*: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
*4. A corrupted iPhoto Cache*: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
*5. A corrupted preference file*: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
Regards
TD -
In itunes, pressing alt to display the menu bar totally worked for my windows running machine but I CANNOT get the menu bar to show in itunes on my imac. what's with that?
You got me experimenting ... and it was viewing the display with the green button (rather than amber) on the left that revealed the menu bar. Hovering didn't do it. Thanks for your help. First time in Apple Support.
-
In my Macbook Pro, on a few occassions, the apple menu bar blacks out. its displayed as a negative image. The desktop wallpaper get greyed out and i get a blank screen as wallpaper. No idea why this happens. I reset the system and issue gets resolved.
AshwinVC wrote:
I reset the system and issue gets resolved.
How? -
I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7. I also tried to export a document directly from Adobe Reader using the tool, but it gave me an error message. Any suggestions?
Hi,
Try to use different browser.
Would it be possible for you to send me the document so that i can take a look at my end?
You can email me at:[email protected]
Regards,
Florence
Maybe you are looking for
-
Disabling Popularity Trends and Reindex library in Sharepoint 2013
Hi, I need to disable "Popularity Trends" option for all items, lists and libraries in SharePoint 2013. Also i need to disable "Reindex library" options in SharePoint 2013 document library Advanced settings. If this is possible, can anyone ellaborate
-
HT201263 How do I solve error no. 1050? I can't restore my iphone! What do i do next?
How do I solve error no. 1050? I can't restore my iphone! What do i do next?
-
Has anyone had issues with the Yahoo Mail app?
A couple of months ago, I noticed my battery draining quickly while I was at work (data, not wifi) and not long after that I received a notice that I had used 75% of my data in less than 2 weeks! My daughter and I share 10GB data and we rarely use m
-
P5800 Problem [only front speakers & sub r working]
Hi, i'm portuguese so i hope i can explain my problem in order for u to help me. (sorry for my bad english btw..) I bought a P5800 speakers system and installed them perfectly with the help of the manual, everything was double-checked and everything
-
Arranging form folders in hyperion planning alphabetically
Is there a way to arrange the form folders in hyperion planning alphabetically? Can we, and if we can is it the only way, sort the folder names in the relational tables in back-end? Or is there a way in the planning web to do the same? I would like t