Cannot get any audio on spdif coa

Im using vista 64 with a regular xfi xtreme gamer. I installed the newest drivers but cannot get any audio to output on the FlexiJack. The digital i/o setting is greyed out on the creative console. Ive tried everything i can and cannot not get any sound. I am using the Z5500. The receiver is across the room and my only choice is to use a long coax cable i have.

You enabled it in your windows speaker configuration under "playback devices" ?
You probably have to set it to default by rightclicking on it and activating it and set it to default!?
http://www.homeys-bunker.de/spdif.jpg

Similar Messages

I have a bose docking station with a 30 pin connector and purchased the Ipod 5G and also have a Ipad4th Gen and have tried several connectors but cannot get any audio. Any suggestions?

I have a Ipod Touch 5G and a Ipad 4th Gen with a Bose sound dock with a 30 pin adapter. I have tried several connectors but cannot get any audio on the sound dock. Do you have any suggestions?

Have you tried this adapter from the Apple on-line store http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c They also have one that uses a cord to connect the dock to lightning that is $10 more.

Sony PFM-42V1: I cannot get any audio from monitor

I cannot get any audio from my PFM-42V1. first: I connected independent speakers via speaker sockets - result no sound. Then after reading its Manuel it suggested I connect headphones to the monitor's audio mini jack - again no sound. What I do not understand is it said if sound doesn't work with headphones - contact computer manufacturer. Any suggestions?

From your description it sounds like your using input 1 or input 2, you will need to feed a audio source into the 1/8 mini female jack (Fig. 1) next to input your using. This will allow the audio to pass to the speakers you've connected to the monitors speakers jacks (Fig 2). Also you'll want to make sure that within the Monitor Menu under Custom Setup that you have Speaker Out: On (not off).
Fig 1.
Fig 2.

Help: Satellite M45 laptop w/Win7, cannot get any audio...

Hello,
I have downloaded a couple drivers, but i get an error when i try to install. Can someone please link me to a driver?? That is the problem right?
Thanks

The problem is that your model is not compatible with Windows 7. I sincerely doubt you'll get everything working properly on your M45 with Win7.
Toshiba laptop models supported for use with Windows 7
Mike

I cannot get any audio from my iTunes account on my PC. Sound works fine with Pandora and everything else. Any ideas?

Help

Just to add, i have also set up the two email addresses and verified them within my icloud account, but still no sync to my iphone or showing on the icloud account...

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

I made a movie with iMovie and cannot get the audio when I burn into dvd. I would like to transfer video to a dvd to be played in any computer and TV

Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty. That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu.
Click to view full size
If there is an item in there drag it out.
OT

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

I am trying to connect my Apple TV to an older Panasonic projection TV using an HDMI to a DVI cable to the Digital IN. I cannot get any sound. Can you help?

DVI interface does't allow audio. Is there optical IN from your Panasonic TV? By then you can connect your ATV to Panasonic using optical together. It will work.

Not getting any audio...help

im using the motu 828mk2 with logic express...i setup everything accoding to the book and cannot get any in put..the Coreaudio is set to the motu, and nothing..im getting the metronome ckick when i enable rec...but no audio level? any sugestions

You need to make sure that in the track pannel, under I/O it is set to the input that your instrument or mic is plugged into.

Cannot get any sound from william hill radio

i have logged onto the william hill radio site but cannot get any sound

sorry to hear about your problems. Try running Audio MIDI, see what's it's set it for both the line out/digital out. Holding down the Alt Key (next to the space bar) gets you a list of all the input and output devices on your macbook pro. Also, see if accessibility is turned on under system preferences. Other than that, I can't say. if you have wifi problems, see if there's an update for it (airport?) or see if you can change Wi-ifi channels on your printer
well, I tried anyways
JB

I was working on a project a few days ago and now I'm not getting any audio or visuals out of it. In the project file the screen went grey. Not sure how to fix this. I'm new to iMovie, but the program seems easy to use and my Mac is new. Any help?

I used to use Movie Maker and it would be able to handle lots of file uploads and big projects. I figure iMovie can do the same since it's newer and it's on my iMac. I was working on a project for a few months, it was working fine up until about a few days ago when the project file just stopped working. Not getting any audio or visuals and the screen went grey. I hope to not lose the project file as I've spent a lot of time on it. The project will still show up in iMovie, but it won't play. Other project files will, but this one won't for some reason. It's my first time using this program and I assumed it would be fine, but now it's causing me big problems. Anyone else run into a similar problem?

But it is I jsut can sync, back up files, or anything becuase its stuck at this screene and wont do execute when i click either of those button

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

My kids have given me a second hand ipad 1st gen MC497B/A ipad 3G 64GB- GBR and I cannot get ANY apps even free ones as says I must have V6 Surely this device is not so old I can't get any apps Plea tell a novice what to do as no free Apple support!

I am the proud owner of a first gen ipad given to me for Easter by my kids and we cannot get any apps even freebies as says I must have V6 but now idea how to upgrade my ipad! i would be very grateful for simple instructions as to how to get apps ASAP And I have no idea what operating system I have
Many thanks a VERYNovice ipadder

The iPad 1 can be updated to iOS 5.1.1. You can see what level you are running in Settings > General > About > Version.
If you are not at iOS 5.1.1 and if you are have iOS 4 (or earlier) there is no Software Update in Settings. That feature was first added in iOS 5.
To update you will have to connect your iPad to iTunes on a computer (preferably the one you sync with and backup to).
See here: http://support.apple.com/kb/HT4972
If you are on level 5 but not at 5.1.1 you can update to 5.1.1 using Settings > General > Software Update.
There are still many Apps which will run on iOS 5. Also, some developers have older levels still available for the iPad 1.

I recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

i recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

That's possible if he didn't connect to a WiFi hotspot after taking them. I don't think the "Personal" Photo Stream uploads over Cellular, unless they changed it since the last time I used it.
If that's the case, then the photos likely didn't upload to Photo Stream and are stuck on the phone.
And you're not going to be able to get them back, either.

I have downloaded Fiefox 7 for my laptop running Windows 7. Now i cannot get any sound from web content. ( I can still get sound using Google Chrome !!) Any ideas ?

I downloaded Firefox 7 and now cannot get any sound when playing web content. I have reinstalled but still no joy. When I use Google Chrome for the same useage, it plays sound fine.
Any ideas ??

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
2. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
   Download it first.
   The next step is important.
   Click Safari in the menubar and select “Quit Safari”.
    Follow the prompts and install it.
    Restart computer. Relaunch Safari.
2. Allow Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.

I cannot get my audio memos to download with my pictures

I cannot get my audio memo to download with the picture from my cannon gs9 camera

Hello silent george,
This may be due to iPhoto or Aperture not having been reinstalled on your system.
What do I need to use My Photo Stream?
To use My Photo Stream you need an iCloud account, compatible devices, and up-to-date software:
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
Cheers,
Allen

Cannot get any audio on spdif coa

Similar Messages

Maybe you are looking for