Cannot get Aperture External Editor to work with CS2

Hi,
I've been trying to get Aperture to work with CS2 as the External Editor. After setting the Aperture prefs and trying it out, CS2 opens, but goes into an eternal wait state without the picture ever showing up. After this happens, CS2 no longer works correctly by itself, even after a restart. It again goes into an eternal wait state. Reloading CS2 from scratch makes it work OK. I tried again, but alas trying to get CS2 hooked up to Aperture again repeated the problem and I had to reload CS2 yet again to get it working. Any ideas as to what I'm doing wrong or how to get this feature working.
Charlie Maiorana

Hi!
I would suggest the following:
Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
will be running.
With regards,
Dagd

Similar Messages

I cannot get my iPad 2 to work with VPN provider.

I cannot get my iPad 2 to work with my VPN service provider. Using OS 4.3.3. iPad purchased in the USA. Have heard there are issues with iPad 2 and VPN support. Any suggestions?

You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.

I cannot get my Canon MX410 to work with my new computer. Computer is Acer Aspire One.

Cannot get my Canon MX410 to connect with my new Acer Aspire One.

Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Cannot get SSH thru DynDNS to work with Leopard

Hi everyone,
OK, I have been digging around online for a long time trying to find a clear answer to my problem, and I can't find it anywhere so I figured I would just start a new thread and see if I could get some help.
I have an iMac connected wirelessly to an Airport Express which is plugged into my cable modem. I would like to be able to SSH into my iMac remotely. I have an account with DynDNS and have installed their daemon program, which detects my external IP fine. With Tiger, SSH and DynDNS worked great -- I regularly used SSH to sync up my school documents. However, with Leopard, I absolutely cannot get it to work. If I ping my DynDNS name or my IP address, it responds, but I cannot portscan my machine or access it in any way. Back To My Work works fine (when it works at all), but I want a solution that will always work with any machine.
I am not a newbie and know a lot about OS X, but I am not very familiar with networking lingo and have been largely confused by the information I have found online about similar problems. If you have figured out a solution to this problem and can give me a clear explanation, I would love it. I seem to have read somewhere that this required me to set a static IP for my iMac from the Airport, but I haven't been able to figure out how to do that without breaking my internet connection.
Thanks!
Alex

All my macs at home and in my office are running leopard. I have no problem with SSH logins from outside my network using a Dyndns name.
From the mac that your using to engage the ssh connection use the host command in your terminal app to see if the dyndns name is resolving to the correct IP of your server.
host dydns.name.org
If that runs up the correct IP address engage the ssh connection using the IP address.
If that works then your ssh client is having dns issues
so engage the connection again with the dyndns name but use a very verbose login so see if it turns up an error
ssh -vvv dyndns.org
replace dyndns.org with your actual domain name.

How do I configure the custom external editor to work with Premiere Elements 13

Situation
I own Lightroom 5.6 and I'm experienced. I've just bought Premiere Elements 13 and I'm a video-editing virgin (be gentle with me). I've spent a day experimenting, reading, watching videos, I've tried asking my question in Premiere Elements forum, and I'm still stuck (i.e. I've tried reasonably hard to solve my own problem).
Problem
I've tried to set up the custom external editor in Lightroom 5 to send photos to Premiere Elements, so that I can incorporate images into movies. Having set it up, when I use it by selecting Photo/Edit In/Premiere Elements 13/, there is an exciting lull as a copy of the image is created and appears in LR, then Premiere Elements launches, then what??? There is no clue as to what has happened to the image regarding its import into Premiere Elements 13. It doesn't appear on the screen, it doesn't appear in the Organizer, it's no-where to be seen, other than in LR!
Resolution sought
Can anyone tell me:
1. Is it possible to use Premiere Elements as an external editor in LR5 ?
2. What are the precise settings for each field (I've played with the various field options but obviously haven't yet found the right combination)?
3. If I configure it correctly, what does good look like: what should I expect to see happen in Premiere Elements when I squirt photos over from LR5 via the 'Edit In' option in LR5?
I don't know if this is relevant: MacBook Pro 16GB 2.8Ghz i7, 750GB SSD (i.e. plenty of space, plenty of horsepower), OS X 10.9.5
I'm hoping the answer isn't 'sorry, it can't be done' because if it is possible, it would be a real contribution to my video editing workflow.
Thanks
Phil

You don't have to buy an Apple keyboard, but you probably need at least to buy a keyboard that connects via proper USB instead of through some Windoze-world adapter, which probably requires a driver that's not available for the Mac OS.
The Apple Bluetooth KB and Magic Trackpad make a fabulous combination for use with any MacBook Pro that spends a lot of time in clamshell mode, because the trackpad works exactly like the built-in trackpad. So there's no transition adjustment to make when you pack up your MBP and go portable with it.

I cannot get my home sharing to work with my new PC. I have tried all suggestions from the manuels. Can anyone help?

i cannot get my homesharing to work with my new PC. Any ideas besides the ones in the manuel

Yes, I do think it is no longer using PPPoE.. but the IP is configured to the fibre to ethenet or vdsl port.
You might need to ring the ISP and get them to give you details.
Anyway it is easy to try.. plug the Extreme WAN port to the new modem and test with dhpc. Check that you get a public not private IP address.

I have requested and accepted the most current Firefox program updates with my windows vista system. They are not registering but I am told they are downloaded. Then I cannot get the printer option to work with any version of firefox. in English

I have taken the firefox updates when offered to 4.4. I have the browser as an aside to Internet Explorer 9 as a backup browser. When I use Firefox I am being told my system is not up to date and I need a newer version. I download the version and keep getting told I am not current with firefox. When Firefox DOES work I cannot get any printer icon or settings to enable and allow the printing of a page. I have to use IE9 to get the printer to work. Using eBay I cannot get the uploading of pictures from my computer to consistently operate even though I use small JPG files under 500KB.

There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT

I cannot get my Logitech webcam to work with Lync for Mac

I cannot get my Logitech Webcam or Cinema Display facetime webcam to work with MS Lync. Lync always uses the Macbook Pro's standard webcam and does not give any options anywhere to choose between video devices. The same webcam works with GotoMeeting, Viber, Skype and Google Hangout without any problems.
Does anyone know how I could get it working with Lync for Mac too? I have the Lync for 2011 version 14.0.7.

Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I cannot get my DAQPAC 6016 to work with Matlab R14, what driver do I need?

I've just installed the software necessary to support the DAQPAC 6016 usb device. Using NI software, the hardware appears to operate. However, I cannot get Matlab R14 to work with it at all. The following matlab line fails immediately: AI = analoginput('nidaq', 1);
I installed the SW and drivers that came with the daqpac which I believe is v7.1 or v7.3 (don't know because I don't have the actual labview).
I am stuck, where do I go from here?
Joost

Joost,
NI currently has two drivers -- NI-DAQ Traditional (Legacy) and NI-DAQmx Measurement services. NI-DAQmx is the newer driver, and our newest boards are only supported with NI-DAQmx. That being said, the DAQPad 6016 is only supported in NI-DAQmx, and the Matlab DAQ Toolbox currently only supports Traditional DAQ.
Your solution, at the moment, seems to swtich to another appication development evironment (LabVIEW, LabWindows/CVI, Visual Studio, .NET...)
Hope this helps,

I cannot get my Ipod touch to work with my Orange Live Box

Hello!
Please help me - this is my second day of trying to resolve this!
I cannot get my Touch to connect to my Orange (Wanadoo) livebox. I have tried pressing '1' to allow the devices to pair. Doesnt help although the small antennae-like light does not flash on the live box (thought it should!). I have entered the 26 digit WEP key more times than I care to remember. I heard that I should change settings from WPA/WEP to WEP only but cant work out how to do this.
Very grateful for any assistance.

Hello and Welcome to Apple Discussions.
WEP can be cracked in a few minutes. Try switching to WPA which is mroe secure and isn't finiky about passwords like WEP is.
mrtotes

I cannot get my 8800e-1 to work with isync

I have the 8800 Arte (Black) the phone id is 8800e-1.
I am using OSX5 latest version and latest version of iSync
I cannot get it to regonise my phoen to sync the details.
I have Nokia connection software which syncs all my itunes and photos brilliant but not my contacts.
Please can any body help.
Thanks

I don't have this phone but the 8800 and the 8801 is listed as supported directly by iSync since 10.4.9.
Have you paired your phone successfully with your Mac via Bluetooth or are you using only a USB connection?

TS3899 Cannot get my shaw email to work with ios8 on iPhone 5c. Keep getting unable to verify account information

I have had my shaw email on my phone forever without problem. updated to ios8 on thursday and today i cannot access it. Password is correct but kept asking for it and saying it was wrong. Deleted the account and tried re-adding it and now i get Exchange Account Unable to Verify account information. I also tried adding it as other and same message. I went to shaw's info page but they have not updated for ios8 yet.

Thanks for your reply. I use Sky email which is managed by google. I have now deleted the account and set it up again and that seems to be working now. I'm still having problems just getting the Internet connection to work. I won't be taking on any more software upgrades in future until I'm sure that they are worth it.

Cannot get Starcraft 2 Beta to work with BootCamp

I have a mid 2008 15" 2.4GHz Macbook pro running OS 10.6. I am trying to run the Starcraft 2 beta on my 64x Windows 7 partition, it tells me that "My 3D somethingorother is dedicated to another program. Please close all other 3D programs and try again." I downloaded the update here http://www.apple.com/support/bootcamp/, but it tells me "BootCamp 3.0 is not installed. Install BootCamp 3.0 and try again." I have BootCamp 3.0.1 installed on my OSX partition (not sure if this is the same as 3.1), but how can I get the software update to work? I need to play starcraft!

Hi!
I would suggest the following:
Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
will be running.
With regards,
Dagd

How do I get Elements 12 editor to work with iPhoto.

I have tried to set Elements 12 to be my external editor to iPhoto. I have been able to select it in preferences advanced but when I right click a photoand chose external edit, the editor opens but the photo does not.
Same for RAWS and jpeg's, in iPhoto library or in a folder.
Any ideas ? Thank's
Dave.

Most likely you chose the logical file rather than the correct file. The actual editor is buried inside the folder labeled Support Files in the PSE 12 folder:

Cannot get 1-click answers to work with Firefox 6.0.2.

I have installed the add-on extension. Tried pressing Alt and clicking. Nothing. Tried highlighting the word and pressing Alt and click. Nothing. Please help because I miss this time-saver.

And to answer the question the two versions mentioned will work with SeaMonkey 2.0a - 2.6a1 Thunderbird 3.0a1pre - 9.0a1 Firefox 3.1b3 - 9.0a1

Cannot get Aperture External Editor to work with CS2

Similar Messages

Maybe you are looking for