Cannot get bluetooth mighty mouse to work with win xp sp3 bootcamp ver 2.1
I have tried the most popular solution of establishing the mouse as a device, highlighting it in the devices menu, then clicking properties, then services, and once it is done searching checking the box for the "drivers for keyboard, mice, etc [HID]and clicking apply. get the message with the header bluetooth error access denied. this happened recently when I updated bootcamp before mouse worked flawlessly for month on xp. If anybody has any solutions it would be greatly appreciated. Thanks in advance Forgot to mention mighty mouse works fine in the mac os partition
Message was edited by: clown428
Try this solution. First click on the bluetooth icon at the bottom of the windows screen. Then click show bluetooth devices, then click add new devices and when the new device shows up double click on the device. Then a windows shows up at the top of this window it says general and other. Chose other. Another window shows up and check the small box. This small box searches for windows drivers just for this bluetooth device. When done it should pair and work fine.
Similar Messages
-
Does Mighty Mouse only work with desktop Macs??
I just bought an Apple Wireless Mighty Mouse, assuming it'd work with my new Leopard OS X Macbook. I followed the instructions on the Mighty Mouse booklet...but no installation start-up window ever appeared. I'm a beginner with Apple, so I figure I've done something wrong....does the Mighty Mouse only work with desktop Macs and not MacBooks?
Please help if you can.Ah! sorry, my mistake! "wireless" was the key word. And yes, prior to my new mighty mouse, I also used the wireless one. And you need to do the following:
1) Turn bluetooth ON (either from finder icon (you can have it placed on your finder bar by tick box in sytem preferences/bluetooth.
2) Then, you need to "pair" your mouse via bluetooth setup assistant.
3) once "paired" off you go. -
We cannot get our wireless mouse to work on our Mac desktop, even after putting new batteries?
We cannot get our wireless mouse to work even after replacing the batteries, what should we do? This makes it impossible to do anything on the computer as to try to problemsolve this issue.
Bluetooth devices become unresponsive
-
I cannot get my iPad 2 to work with VPN provider.
I cannot get my iPad 2 to work with my VPN service provider. Using OS 4.3.3. iPad purchased in the USA. Have heard there are issues with iPad 2 and VPN support. Any suggestions?
You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.
-
I cannot get my Canon MX410 to work with my new computer. Computer is Acer Aspire One.
Cannot get my Canon MX410 to connect with my new Acer Aspire One.
Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Can't get my hp laserjet 5p working with win 8.1
Can't get my LaserJet 5P working with Win 8.1. My MFC Brother is working fine. Have set the HP as the default; It is seen in printer/devices; info says it is installed correctly; when asked to print a word test, it doesn't; when asked to print a short typedd Word test, it doesn't; only get a gentle music sound on speakers; when checking the what's printing feature, I see there is an error opposite the document I want to test print. Everything seems to line-up ok, but can't print. Seems like it wants to go, like the little engine that could, but something is missing. Am connected via usb/parallel cable, port 1. The printer is an oldie', but a good workhorse, and saves on ink. Much thanks, Jim1
If I recall correctly, postscript is on a removable card on this printer. The symptoms you get sound like the postscript card is removed, but you're using the standard Mac driver - which is for postscript.
The other page language the printer understands is HP's PCL. There is either a Gutenprint driver included in OS X for this printer, or you can update Gutenprint to get it. Gutenprint outputs PCL instead of postscript.
http://gimp-print.sourceforge.net/MacOSX.php -
Can bluetooth mighty mouse be used with windows XP?
i installed XP with bootcamp, and my mighty mouse worked the install of windows and everything, until i actuallly got into windows... any ideas?
It works fine. After setup (use 0000 as pas code) the bluetooth device, you can use it. Upon logging in to the XP, just click once using mouse and then mouse will start working.
However, not all the functions for mighty mouse (like horizontal scrolling, side button etc) works in WinXp side. -
i cannot get my homesharing to work with my new PC. Any ideas besides the ones in the manuel
Yes, I do think it is no longer using PPPoE.. but the IP is configured to the fibre to ethenet or vdsl port.
You might need to ring the ISP and get them to give you details.
Anyway it is easy to try.. plug the Extreme WAN port to the new modem and test with dhpc. Check that you get a public not private IP address. -
I have taken the firefox updates when offered to 4.4. I have the browser as an aside to Internet Explorer 9 as a backup browser. When I use Firefox I am being told my system is not up to date and I need a newer version. I download the version and keep getting told I am not current with firefox. When Firefox DOES work I cannot get any printer icon or settings to enable and allow the printing of a page. I have to use IE9 to get the printer to work. Using eBay I cannot get the uploading of pictures from my computer to consistently operate even though I use small JPG files under 500KB.
There are a lot of IntelliTXT like ''ad'' pop-ups possible.
If your current Adblock Plus filter settings aren't blocking some pop-ups then it is best to take this to the Adblock Plus forum.
* https://adblockplus.org/forum/
* http://en.wikipedia.org/wiki/Category:Internet_advertising_services_and_affiliate_networks
* http://en.wikipedia.org/wiki/IntelliTXT -
Cannot get SSH thru DynDNS to work with Leopard
Hi everyone,
OK, I have been digging around online for a long time trying to find a clear answer to my problem, and I can't find it anywhere so I figured I would just start a new thread and see if I could get some help.
I have an iMac connected wirelessly to an Airport Express which is plugged into my cable modem. I would like to be able to SSH into my iMac remotely. I have an account with DynDNS and have installed their daemon program, which detects my external IP fine. With Tiger, SSH and DynDNS worked great -- I regularly used SSH to sync up my school documents. However, with Leopard, I absolutely cannot get it to work. If I ping my DynDNS name or my IP address, it responds, but I cannot portscan my machine or access it in any way. Back To My Work works fine (when it works at all), but I want a solution that will always work with any machine.
I am not a newbie and know a lot about OS X, but I am not very familiar with networking lingo and have been largely confused by the information I have found online about similar problems. If you have figured out a solution to this problem and can give me a clear explanation, I would love it. I seem to have read somewhere that this required me to set a static IP for my iMac from the Airport, but I haven't been able to figure out how to do that without breaking my internet connection.
Thanks!
AlexAll my macs at home and in my office are running leopard. I have no problem with SSH logins from outside my network using a Dyndns name.
From the mac that your using to engage the ssh connection use the host command in your terminal app to see if the dyndns name is resolving to the correct IP of your server.
host dydns.name.org
If that runs up the correct IP address engage the ssh connection using the IP address.
If that works then your ssh client is having dns issues
so engage the connection again with the dyndns name but use a very verbose login so see if it turns up an error
ssh -vvv dyndns.org
replace dyndns.org with your actual domain name. -
I cannot get my Logitech webcam to work with Lync for Mac
I cannot get my Logitech Webcam or Cinema Display facetime webcam to work with MS Lync. Lync always uses the Macbook Pro's standard webcam and does not give any options anywhere to choose between video devices. The same webcam works with GotoMeeting, Viber, Skype and Google Hangout without any problems.
Does anyone know how I could get it working with Lync for Mac too? I have the Lync for 2011 version 14.0.7.Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I cannot get my DAQPAC 6016 to work with Matlab R14, what driver do I need?
I've just installed the software necessary to support the DAQPAC 6016 usb device. Using NI software, the hardware appears to operate. However, I cannot get Matlab R14 to work with it at all. The following matlab line fails immediately: AI = analoginput('nidaq', 1);
I installed the SW and drivers that came with the daqpac which I believe is v7.1 or v7.3 (don't know because I don't have the actual labview).
I am stuck, where do I go from here?
JoostJoost,
NI currently has two drivers -- NI-DAQ Traditional (Legacy) and NI-DAQmx Measurement services. NI-DAQmx is the newer driver, and our newest boards are only supported with NI-DAQmx. That being said, the DAQPad 6016 is only supported in NI-DAQmx, and the Matlab DAQ Toolbox currently only supports Traditional DAQ.
Your solution, at the moment, seems to swtich to another appication development evironment (LabVIEW, LabWindows/CVI, Visual Studio, .NET...)
Hope this helps, -
I cannot get my 8800e-1 to work with isync
I have the 8800 Arte (Black) the phone id is 8800e-1.
I am using OSX5 latest version and latest version of iSync
I cannot get it to regonise my phoen to sync the details.
I have Nokia connection software which syncs all my itunes and photos brilliant but not my contacts.
Please can any body help.
ThanksI don't have this phone but the 8800 and the 8801 is listed as supported directly by iSync since 10.4.9.
Have you paired your phone successfully with your Mac via Bluetooth or are you using only a USB connection? -
Cannot get Aperture External Editor to work with CS2
Hi,
I've been trying to get Aperture to work with CS2 as the External Editor. After setting the Aperture prefs and trying it out, CS2 opens, but goes into an eternal wait state without the picture ever showing up. After this happens, CS2 no longer works correctly by itself, even after a restart. It again goes into an eternal wait state. Reloading CS2 from scratch makes it work OK. I tried again, but alas trying to get CS2 hooked up to Aperture again repeated the problem and I had to reload CS2 yet again to get it working. Any ideas as to what I'm doing wrong or how to get this feature working.
Charlie MaioranaHi!
I would suggest the following:
Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
will be running.
With regards,
Dagd -
Will any wired MIghty Mouse still work with my G5?
Unfortunately, my Mighty Mouse has reached the impossible-to-clean-trackball-anymore stage. It just won't scroll up anymore.
My current Mighty Mouse dates to 2006 or 2007. I wish I knew the exact model number beyond A1152.
Must I be concerned about what model Mighty Mouse I buy to replace this one? I know they came out with some zoom version. I don't care about the zoom. I just want the basic scrolling (I don't even use the side buttons; just click and scrolling).
Will any model of wired Mighty Mouse be okay?
Thanks so much!"Unfortunately, my Mighty Mouse has reached the impossible-to-clean-trackball-anymore stage. It just won't scroll up anymore."
Cleaning inside and dismantling the Apple Mighty Mouse
BTW: Before purchasing a new MM, update your OS to 10.4.11 along w/all the updates that goes with it through Software Update.
!http://i50.tinypic.com/izvwo1.gif!
Maybe you are looking for
-
What do I have to do to fix this and get the Media Encoder downloaded. I clicked on the "Learn More" link in the Creative Cloud download utility and this is what is returned to me. Exit Code: 6 Please see specific errors below for troubleshooting. Fo
-
Bi content update rule not in prod
Dear Experts, I'm checking our BI production system today as part of our GO-LIVE activities and I realized that some objects are missing. Namely the update rules for some attributes and texts of Master Data such as 0customer_ATTR,0customer_TEXT, 0Ven
-
On my new iPhone 4 whenever I use the Bluetooth in my car (with it's built in bluetooth) there is a strange whooshing sound that varies in volume and sometimes goes away completely. It wasn't an issue with my previous phone but now when I call people
-
drop table gtestz create table gtestz(zip varchar2(9), tname varchar2(10)); insert into gtestz values ('11111','cnp'); insert into gtestz values('11111','onn'); insert into gtestz values('22222','cnp'); commit; SELECT ZIP,COUNT(DISTINCT(TNAME)) FROM
-
Hi, I have a Drag n' Drop (DND) application that uses Strings in its lists. However, I would like to use any kind of object to transfer between different lists. Is this possible? Thanks, Fred