Cannot get Boot Camp drivers (for Windows XP) installed

I've partitioned my Time Machine HD for the 32GB/FAT format of Windows XP/Home Edition w/SP2. The installation of Windows proceeded OK. However, after installing Windows, ejecting the W-Install disc, and inserting my MAC OS X Leopard disc, the "setup.exe" file does not open. If I start up in Windows, I cannot open the Opt. Disc drawer since the BC drivers are not installed; if I insert the OS X disc in the drawer, then restart in Windows, the "setup.exe." file does not open.
Where do I go from here to install the Boot Camp drivers for Windows? These drivers are needed for 'normal' Windows operation, and are required in order to install the Boot Camp update. Any suggestions would be appreciated.

Hi David,
while you are in Windows and have the Leopard DVD inserted, can you access the content of it using the Windows Explorer ?
or maybe this hint on MacOSXHints can help you access the Windows Content of your Leopard DVD while in OSX http://www.macosxhints.com/article.php?story=20080708145453136
If so, you can try to copy the Windows Content onto a USB Memory Stick and use it to install the drivers.
Good Luck
Stefan

Similar Messages

I'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

i'v got the latest macbook pro 13" and it dose not come with the lion os disk so how do i get the boot camp drivers for windows 7 without an os disk

Page 5, step 2, #2, 2nd bullet.
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.7.pdf

Unable to install Boot Camp Drivers for Windows

Mac Pro (2) 3.2 Xeon quads
Mac OS 10.5.2
Boot Camp side - Windows XP pro x64 w/SP2
Step 3 listed in the instructions for setting up Boot Camp is to Install the Boot Camp drivers for Windows. At this point Windows recognizes my Mac Install disk 1. I get the following message: "the installer encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again." I am not sure if I needed to do something to install the Service Pack 2? My firmware is at MP31.006C.B02 and 1.25f4. When I checked for the latest firmware, it returned a message that it was not necessary.
Maybe the XP pro x64 is not compatible?
Barry in St. Louis

I did install windows xp sp2 32 bit on my macbook pro 2.2 GB and I'm getting the same ...
When trying to install boot camp drivers, a message came up saying:
Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista.
The only option it gave me was to click the "OK" button. When I clicked OK , another message came up saying:
Boot Camp Installer completed. The install encountered errors before Boot Camp could be configured. To retry these operations at a later time, please run the installer again. Click "finish" to exit installer. I am running a brand new full retail version of windows xp service pack 2. Applecare will not help blaming Microsoft and of course Microsoft is blaming Apple. What a bunch of useless crap!! Can anyone help??

Boot camp drivers for Windows XP

Where do I get the Boot Camp Drivers for Windows XP after installing Windows XP again

Regarding my query, the following are attached:
1. Proof of Purchase (Bill dated 26/12/2008)
2. The Serial Number as noted from the Mac screen is as follows:
Serial Number (system): YM******ZE4
Hardware UUID: ****
<Edited By Host>

Boot Camp drivers for windows (download)

I am trying to instal windows 7 on my MacBook Pro thru Boot Camp. Does anyone know where I can download the Boot Camp drivers for windows. I can't find them on the apple website and I don't have my Mac OS X instal DVD with me.
Thank you

Nick Px360 wrote:
Are they essential or can I run windows 7 on my Macbook Pro without the bootcamp drives
Only if you don't mind a Windows system lacking most features and thus beaing nearly unuseable.
Applying the appropriate drivers for hardware support is a must for all operating systems.
Stefan

Installed Boot Camp drivers for Windows 7, now black screen!

I have a question--I have a late 2009 iMac with the ATI card, followed Apple's procedure for avoiding the black screen while installing Windows 7 on the partitioned HD, and found I could not update to Boot Camp 3.1 without already having Boot Camp 3.0 from the 10.6 install disc. I inserted the disc, had to perform a workaround because it said I couldn't run 64-bit, and installed the drivers (I assume?) from Boot Camp on the 10.6 disc. When my iMac restarted the screen soon goes black. I guessed I was at the login screen, typed in my name and password, and could hear it logging into Windows--my sound works, Magic Mouse works (no scrolling), etc but no screen after booting up in Windows. Did the Boot Camp drivers from the install disc over-write something that was working? How do I fix this so I can proceed to install the 3.1 and 3.2 Boot Camp updates? Just the ATI* trick? Please help!!!

I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
Hope you understand and sorry again for taking up your valuable time

Boot Camp Drivers for Windows 7

Hello...
I just installed win7 on my Mac Mini with Boot Camp Assistant, but after installing and making the setup, I was not able to install the drivers from my SL DVD. Windows 7 can't read the disc and I cannot find the program to install my drivers even if I tried to look in the contents of my DVD in win7.
I actually don't know, if I should drag in my install DVD that came with my Mini, because when I bought it, the "Tiger" was released and I have only the SL install disc 1 "burned" from my friend.
I would really appreciate if somebody would help me.
Thanks

I'm sorry to take up your time guys - as I wrote earlier I'm not that technical and new to all of this - I was promised that I could do everything the mac way in the windows environment if I bought Parallels Desktop 7 - I only did this as my company is installing af new CRM system that is only supported in Windows - now I have installed everything and find out that the MAC keyboard shortcuts and layout is not working at all in i.e. Outlook etc. and I've totally forgotten how the Windows shortcuts etc. is working - Parallels asked me to go to Apple for help and here I am
You write that "if you believe it's correct do it" - but I don't believe anything else than what I'm told - I'm not going to install anything if I don't know how to do and whether it's correct - I wont have the nerve to do that.
If at least could get a list or someting on how to use my Magic Trackpad in the windows environment I would be happy - then I would just have to switch between how to use it on both sides.
Hope you understand and sorry again for taking up your valuable time

Boot camp drivers for windows 8

Every thing works well on windows 8 install using boot camp. Even all drivers available for windows 7 work and let windows 8 function all the way. I only got struck on track pad as this is only important thing which gave away and never worked. On using wireless mouse or USB mouse one can have alternative to track pad. Fail to understand why Apple is making an issue by not releasing drivers for its crack pad which enable the machine to work in windows mode. Every time one use windows curses apple for this intentional blockage. May be Apple devices a way that people must remember them once any one uses boot camp. If Apple is so hostile to Microsoft why allow even boot camp?

Ramesh Mehta wrote:
Every thing works well on windows 8 install using boot camp. Even all drivers available for windows 7 work and let windows 8 function all the way.
Really?
I only got struck on track pad as this is only important thing which gave away and never worked.
OK, everything did not work "all the way" then.

How can I download the boot camp drivers for windows 7 64-bits?

I have a macbook pro Retina (no disk tray) purchased in mids 2012. I have no internet access on my macbook since my wifi is a cablemodem one.
And the whole problem is that I've recently installed a copy of windows 7 64bits using BOOT CAMP and I can't reboot my PC to access my MAC OS X disk!!
Please, help!!!!!!!!

Did you try booting while holding down the Option key?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks Tim

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

Can someone help me install Boot Camp drivers to Windows 8?

Hey guys, I just installed windows 8 32 bit developer preview on my mac via boot camp. im not very familiar with exactly how boot camp drivers work, so i need a little help. First i will tell you what i have done.
1. installed win 8.
2. tried to run the boot camp 3.3.exe in windows 8. I used the troubleshoot compatibility option but an error camp up saying boot camp was already installed.
3. then i rebooted holding the option key so to boot up in osx. i then extracted the bootcamp 3.3 files to a flash drive.
4. after booting back to windows, i tried doing the compatitbility settings again with each individual file within the bootcamp 3.3 files. an error popped up saying something like "check to see if your hardware needs 32 bit or 64 bit version of this software." (i dont remember the exact wording)
i did some googling but i figured that i could get professional help from you guys.
I am going to classes all day so please be patient, because i wont be able to check this until later this afternoon.
help is very much appreciated. thanks in advance.
kpasa.

you need boot camp 3.0.x first before later versions can be installed;
Or,
I don't know what currently Boot Camp Assistant in 10.6.8 will also do a download of drivers.
But other than change Properites and try setting "use Windows 7 mode" and such, I think you are left high and dry with whatever is in 8.
And I use 8 on two of three systems. I left my Mac Pro @ Windows 7 for now but I much prefer Windows 8, yes.
I would not have chosen or gone with any 32-bit version. As long as you have 3GB RAM or more, forget it. Use 64-bit.
I have not seen or rather read any "success" stories with 8 and Apple drivers though.

Early 2008 Mac Pro - Can't load Boot Camp drivers for Win 7 64

Trying to install Win 7 64 bit on my early 2008 Mac Pro. I downloaded the Boot Camp drivers 4.0.4033 and installed them on a USB drive but, for some reason, when I try the install them during the process, I get a message that my hardware is not recognized. Skipping the driver loading process, I am able to install Win 7 but when the system trys to restart to continue the install, I get a message "disk error, press any key to restart". Pressing any key does not get me anywhere. I went through the Win 7 repair process and again tried to load the drivers with no luck.
Any thoughts would be appreciated.
Thank you,

That article was also my starting point and I have followed those steps again and again and again. I haven't slept, I haven't done anything other then try to make it work for more hours than I can count. I came here for help because that solution is not working for me.
The region and keyboard type settings simply don't have the Apple keyboard layout listed. As I said, someone on the Fusion forum tried to follow the article's instructions too and he managed to get it working because he COULD run setup.exe (Boot Camp Drivers) on his machine, and I CAN'T. Yes, it is all explained in that article... but the drivers WON'T INSTALL, I get an error message saying "This version of Boot Camp is not intended for this computer model".
First you said it wasn't physically possible for me to install the drivers, then you said I should just follow the article. Well, the article clearly says "Install the Boot Camp Windows device drivers in the virtual machine" which you just said couldn't be done! I want to cry. I should have just bought a second laptop, this is too painful.

Where do i get the network drivers for windows 7

I just installed windows 7 profession on my 13 inch macbook pro. It did not install all the drivers. Where can I get them?

Welcome to the Apple Support Communities
Your computer needs the Windows support software in order to make everything run correctly in Windows. If you are using OS X Lion or OS X Mountain Lion, just start in OS X (holding the X key while your computer is starting), open Boot Camp Assistant and follow the steps to download the Windows support software into a USB drive. Finally, start in Windows and install the drivers. Also, you can check what Boot Camp version supports your Mac and download the latest version from the Apple site > http://support.apple.com/downloads
If you are using Snow Leopard, insert the Mac OS X DVD which came with your computer or the Snow Leopard disc and install the Boot Camp drivers in Windows

How to update Boot Camp drivers when you already install Boot Camp?

The last time i install Windows 7 (Boot Camp) and drivers on my Mac was a bit long time ago, and i realise that there is some new drivers available for mine, so how can i update my Boot Camp drivers, please help me, and thanks!!!

I have MacBook Pro Retina w/Lion (of course), installed Win 7 Pro 64-bit, using Boot Camp procedures and files that were issued June 14. My BootCamp Assistant says it's 4.0.4.
My question is: how do I know when the Windows Support files (drivers) are updated by Apple? I would have expected an update by now, but I just went into Boot Camp Assistant on Lion, re-downloaded the drivers, and I *think* they are all dated June 14th still. (looked in WindowsSupport folder which is where it said it downloaded them)
There doesn't seem to be a reasonable way to get notified if there are new drivers or not.
My expectation was that I could run *something* either on the Windows or OS X side, and it would *tell me* that drivers needed updating, or at least say "you are running version X".
It can't be that I have to re-download the drivers and check the dates on all the files every time I'm curious if there's updates available. Can it?
The files seem to be on some mysterious Apple server and the only thing I can do to that server is ask to download the support files. No query, no "is an update available", ... ???
It's not even clear to me that the Windows Support files have a version number.

Cannot get Boot Camp drivers (for Windows XP) installed

Similar Messages

Maybe you are looking for