Cannot get Bridge to run

I just installed Prod Prem CS6 on my laptop. I cannot get Adobe Bridge to run. I can run After Effects and Photoshop. I tried to start Bridge as an Administrator, but that did not work.
The install was a clean install.

Alan, do you get any error message, while running BR CS6? If so, error screenshot would help.
Could you check if you have multiple Bridge processes running at the same time in Task Manager. If so, end those processes and check again.
Turn off User Account Control : http://helpx.adobe.com/x-productkb/global/disable-user-account-control-uac.html
Restart Windows in a modified mode | Windows 7, Vista - http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html
Try the above steps and check if that helps.

Similar Messages

I cannot get Bridge to open - I get the message that "the operation could not be completed"

I cannot get Bridge to open in my new CS5 Suite - I get the message that "the operation could not be completed." Photoshop comes up fine, but no Bridge. I have a MacBook Pro. Thanks.

I am having the same issue.
MacBook Pro, OSX 10.6.4
Photoshop CS5, Bridge CS5
It will not open, I have reinstalled, cleared the cache, & reset preferences, + installed the patch.
I do have Bridge CS3 that came with my PS Elements, & that works. Do not have any Norton, or other software running.

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can a

I have a packardbell laptop with photoshop elements 8 installed from new. I have used it on several occasions but I cannot get it to run now. When I open a photo using elements the Adobe box pops up saying that the programme has unexpectedley quit? can anyone help me please as I have several photos to edit before the end of this month. Many thanks for any help

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run.

I have a Mac Pro Intel Xeon 3.2 Ghz Quad core (mid 2012) using OSX 10.7.5) and cannot get iDVD to run. I tried 7.0.4 and 7.1.2, both from Apple software update and both crash during "loading themes". I am reluctant to upgrade OSX from 10.7.5 because I do not want to loose Final Cut Express 4.0.1. Apple Care no longer supports iDVD. I want a version if iDVD that supports Chapter markers as in iDVD 7.?.? that i used with my old (now deceased) Apple Power PC Mac Pro.

iDVD 7 should work fine with 10.7.5. Try this basic troubleshooting fix:
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iDVD folder.
3 - launch IDVD and try again.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
OT

Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de

Installed, but cannot get Firefox to run. When I try, it crashes. Report contents give adapterdevice id - 0x0a3c and adaptervendorid - 0x10de
Have tried to uninstall and reinstall.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

I cannot get the auto run to load panasonic HD WRITER disc onto my applemac

I CANNOT GET THE AUTO RUN TO LOAD A PANASONIC HD WRITER DISC ONTO MY APPLEMAC

There is no auto run in OS X. That's a feature of Windows. If your disc is for Windows then whatever is on it will not work on the Mac unless you are running Windows. Perhaps you should visit the Panasonic site and see if they have an OS X version of the software.

I have an IAMc 4.1 with intel core duo. Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit. Is this because my older IMac won't support 64 bit?

I have an IAMc 4.1 with intel core duo. Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit. Is this because my older IMac won't support 64 bit?

Hi,
the Intel Core Duo processor is a 32-bit only processor and not capable of 64-bit.
Only the Core 2 Duo and later processors are capable of 64-bit.
Sorry
Stefan

Cc2014 loads then closes. cannot get program to run

my cc2014 will load, then pop up states program closed. cannot get it to run.

I did read those tutorial files and the CATALINA_HOME and JAVA_HOME are set correctly- these were set just the same on another computer the other night and it worked fine and ran the first time.
The docbase is pointing to ROOT - as far as i can see in the server.xml file
- i've tried installing it on a newly installed windows 2000 machine- and it won't work on it either- is it maybe something with windows 2000?
i'm using the java sdk 1.4.1 and using tomcat 4.1.24 and windows 2000.
more help would be appreciated, i don't know what i will do if i cna't get this working- i have a week to come through on the project that depends on it.

Just loaded cs6 extended. cannot get bridge to open

just loaded cs6 extended. cannot get bridge to open.

conswan, I would request the MOD's to move this to the bridge forum.
In the mean time you can try opening Bridge while pressing
Alt + Ctrl + Shift Key on Windows
OR
Cmd + Shift + Ctrl on MAC
That will reset the preferences for Bridge.
We would also suggest you to have a look at this thread.
http://forums.adobe.com/message/5123747#5123747
- Garima

I AHVE DOWN LOADED YM TO MY MAC BUT CANNOT GET IT TO RUN OR PUT THE SMILEY FACE ON MY FRONT PAGE IT SAYS IT IN DOWNLOAD FILE BUT THAT ALL I GET PLZE HELP

I have DOWN LOADED YM TO MY MAC BUT CANNOT GET IT TO RUN OR PUT THE SMILEY FACE ON MY FRONT PAGE IT SAYS IT IN DOWNLOAD FILE BUT THAT ALL I GET PLZE HELP.. i dwn loaded it 2x
but icon say to slide smile face into the square i do that then all disappears
why are thing so diffcult
plze help
this is yahoo messenger im talking about
thanks
george

okay george, I'll try to help you
1-download yahoo messenger. save the .dmg file to your desktop or downloads, wherever your downloaded files go. Double click on it after it has downloaded and it should open up. (ah, I see-i checked out the youtube video on how to install it). then read the terms and conditions, click on agree, then drag the app (the smiley face) to the Applications folder (the square, as you call it), then it should copy it to the Applications folder. Then right or control click on the open yahoo messenger .dmg thing, and choose Eject, which should eject it into the trash. You are done installing Yahoo Messenger. click your hard drive icon on the right top of your screen and move to the Applications folder. Yahoo Messenger should be there. If you need quick access to it, or use it a lot, you can drag a copy to the dock....
Why are things so difficult? it's good to be curious, george. Might I suggest booking some time at the Apple store, or if you can afford to, pay for some one-to-one training
Using the Mac isn't difficult, but it does take some practise and getting used to
John B

After reinstalling CS3 I cannot get bridge (or photoshop) to update

I had to reinstall CS3 due to some graphics issues. I've restarted the computer and bridge/ps several times...and keep hitting the update button but after updateing adobe reader..it doesn't find anymore updates. So I still have 4.0 and cannot read canon 50D raw files as well as many more issues.
I'm running 10.5.5 2,0 dual core PC chip with 5 gig ram.

The Adobe Updater does seem to work in CS4 however.
A new Updater has been posted and there are a bunch of small updates for the Suite listed for downloading and installing and it would be a pain to do all of them manually.
If you have library/application Support/Adobe open while the installation is happening, you will see just how many files are being uninstalled and replaced by this operation!
I have just run the Updater (via Photoshop CS4's Help Menu) and it went flawlessly.

RDS and Gateway issues: Cannot get remoteapps to run without opening port 3389 on firewall

I am testing the setup of a small RDweb server to host QuickBooks for some remote sales users (4 users). For the most part, I have everything installed on one virtual server (using 2012r2 "Quick Start" session host deployment with the additional
Licensing and Gateway server roles added to the same server).
Everything works excellent with one exception. External clients cannot launch published apps without having port 3389 open on the firewall, even with the gateway role installed and the 'Deployment Properties' set to use the gateway. They can properly connect
to the RDweb site and view the published apps. The only way it works is open the firewall port (at which time I can disable the gateway or leave it configured and it works either way). Internally, everything works accordingly. I have followed the steps outlined
on many sites and have combed though the forum here to no avail.
Error received (summarized but is a well documented error):
remote desktop can't connect to the remote computer: 1- Your user account is not listed (it actually is) or 2- You might have specified the remote computer in NetBios format . . etc.
This is an existing SBS 2011 environment with additional virtual servers setup to host QuickBooks as outlined below:
Current setup:
Used Quick Start to install Remote Desktop Services in hosted sessions mode
Installed the additional roles for Licensing and Gateway server on same server
Configured wild card public certificates on all four services (Connection Broker(2), Web Access and Gateway)
Configured internal DNS to properly lookup our external FQDN of this server (ex. quickbooks.contoso.com points to quickbooks.contoso.local
One thing I noticed (just now) when I launch a published app and the firewall has port 3389 closed, a dialog box pops up directly after launching the app that warns about running a RemoteApp program and mentions the Remote Computer and the Gateway Server
as both the same (which it is); however, I would have assumed one would have listed the internal server's name while, instead, both are listed as the external FQDN. Either way, internal DNS should still allow it to properly route . . no? I don't know . . I'm
sure I am just missing something in a routing configurations somewhere. The gateway service is not properly looking up the RDweb service and then seeming not routing the encapsulated RDP session through HTTPS. . .. is my guess . .
I was reading about the "set published name" commandlet; however, I am not experiencing a certificate name mismatch; however, the certificate name does show up as *.contoso.com versus the actual name. I may just be grasping as straws now . . :)

Ok, while I was in the server and looking over the BPA scans: "The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name." This may be due to it showing up as *.companyname.com
versus quickbooks.companyname.com. Anyhow. .. on to the list of actions above:
Changed RD RAP from "Select Active Directory" group to "Allow any network resource" and tested with port 3389 closed on firewall:
Worked. Initially it did not as I had used a custom shortcut created from earlier; however, after logging into the RDweb site again, the application loaded fine now (after the RD RAP change)
No error message appeared; however, I did notice that for a split second, the word Error did appear in the browser's tab title, but only very shortly. The app launch does take a bit longer too now (about 10-15 seconds, up from about 4 seconds with the port
open). This, I could care less about so long as we are properly forwarding the traffic through the gateway.
As for log entries, I had spend quite a bit of time in there and only had minor issues with loading user profile setting taking too long and policy settings preventing the redirection of USB devices. Looking again, no issues still. Just a bunch of informational
entries where I would connect before (and disconnect) but only with the port on the firewall open; otherwise, there was not an entry corrolating to when I would receive an error before. Now though, I am connecting after the RD RAP change and logs are showing
connections even with the port closed. These are in "operational", the "admin" log only shows the update to the RD RAP configuration.
Yes, the LAN's DNS server does relay the lookup information for my public FQDN as the local LAN address. No need for a local host record.
I have now added a new rule in our firewall to allow and forward UDP port 3391 traffic to the internal server hosting remote services
Thank you very much for your assistance on this matter. The RD RAP rule was default built during the creation of this services. Why is the resource not cross-referencing AD security groups? I could have sworn I created a group for that . . .

I cannot get my IMAC running 10.7.5 to connect to my Nexus 7 tablet via USB cable

I have talked to Google about this problem and they seem pretty clueless. On my third call they claim there is an Apple driver that I lack to allow the Android File Transfer software to work. Any help with this would be greatly appreciated.

Choose About this Mac from the Apple menu and check the processor.
If it's a PowerPC Mac, it's already running the newest OS it can.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, upgrade it as if it was a Core Duo Mac, and once done, if desired, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
Mac OS X 10.7 and newer don't support PowerPC software such as Microsoft Office 2004. If you upgrade the OS, back up the computer first.
A PowerPC or Core Duo Mac can't run the current version of iTunes.
(124902)

WLPI 1.2.1 : cannot get demo to run --throws exception

WLPI gurus/support:
I attempted to do the walkthrough on the wlpi edocs site
http://edocs.bea.com/wlpi/wlpi121/tutorial.
After spending a few hours setting up the workflow, when I do the execute
workflow, I get an exception, and no other information appears in the
worklist tool. The exception I get is:
java.lang.NumberFormatException:
at java.lang.Integer.parseInt(Integer.java:426)
at java.lang.Integer.valueOf(Integer.java:507)
at com.bea.wlpi.server.workflow.Variable.setValue(Variable.java:213)
at
com.bea.wlpi.server.workflow.EventVariable.set(EventVariable.java:53)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.setVariab
les(WorkflowProcessorBean.java:1208)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:102)
at
com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java:444)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(
WorkflowProcessorBean.java:708)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWi
thErrorHandling(WorkflowProcessorBean.java:1102)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantia
te(WorkflowProcessorBean.java:704)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanImpl.insta
ntiate(WorkflowProcessorBeanImpl.java:189)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.ins
tantiate(WorkflowProcessorBeanEOImpl.java:105)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.checkTrigger(Even
tListenerBean.java:291)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(EventLi
stenerBean.java:241)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1938)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1897)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1784)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1859)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Workflow warning: com.bea.wlpi.common.WorkflowException: Illegal type
conversion
: from "EmptyNodeListImpl" to "Integer".
at com.bea.wlpi.server.workflow.Variable.setValue(Variable.java:273)
at
com.bea.wlpi.server.workflow.EventVariable.set(EventVariable.java:53)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.setVariab
les(WorkflowProcessorBean.java:1208)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:102)
at
com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java:444)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(
WorkflowProcessorBean.java:708)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWi
thErrorHandling(WorkflowProcessorBean.java:1102)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantia
te(WorkflowProcessorBean.java:704)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanImpl.insta
ntiate(WorkflowProcessorBeanImpl.java:189)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.ins
tantiate(WorkflowProcessorBeanEOImpl.java:105)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.checkTrigger(Even
tListenerBean.java:291)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(EventLi
stenerBean.java:241)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1938)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1897)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
at weblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1784)
at weblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1859)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
I'm using WLPI 1.2.1 and Weblogic 6.0 sp1 with rolling patch 1. SQL Server
2000 is there, but there is no exception in the jdbc log.
I assume this is a bug. Otherwise I think it would be a problem if there
was no way to syntatically or in a stack trace say that the "Exception was
caused by work list task x, etc.."
Thanks for any help.
Ken Rimple

FYI,
Was told by evalnet that this is a known bug... I'll update you when I know
something.
Ken Rimple
"Ken Rimple" <[email protected]> wrote in message
news:[email protected]...
WLPI gurus/support:
I attempted to do the walkthrough on the wlpi edocs site
http://edocs.bea.com/wlpi/wlpi121/tutorial.
After spending a few hours setting up the workflow, when I do the execute
workflow, I get an exception, and no other information appears in the
worklist tool. The exception I get is:
java.lang.NumberFormatException:
at java.lang.Integer.parseInt(Integer.java:426)
at java.lang.Integer.valueOf(Integer.java:507)
atcom.bea.wlpi.server.workflow.Variable.setValue(Variable.java:213)
at
com.bea.wlpi.server.workflow.EventVariable.set(EventVariable.java:53)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.setVariab
les(WorkflowProcessorBean.java:1208)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:102)
at
com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java:444)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(
WorkflowProcessorBean.java:708)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWi
thErrorHandling(WorkflowProcessorBean.java:1102)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantia
te(WorkflowProcessorBean.java:704)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanImpl.insta
ntiate(WorkflowProcessorBeanImpl.java:189)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.ins
tantiate(WorkflowProcessorBeanEOImpl.java:105)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.checkTrigger(Even
tListenerBean.java:291)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(EventLi
stenerBean.java:241)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
atweblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1938)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1897)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
atweblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1784)
atweblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1859)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Workflow warning: com.bea.wlpi.common.WorkflowException: Illegal type
conversion
: from "EmptyNodeListImpl" to "Integer".
atcom.bea.wlpi.server.workflow.Variable.setValue(Variable.java:273)
at
com.bea.wlpi.server.workflow.EventVariable.set(EventVariable.java:53)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.setVariab
les(WorkflowProcessorBean.java:1208)
at com.bea.wlpi.server.workflow.Start.activate(Start.java:102)
at
com.bea.wlpi.server.workflow.Workflow.instantiate(Workflow.java:444)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean$1.invoke(
WorkflowProcessorBean.java:708)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.performWi
thErrorHandling(WorkflowProcessorBean.java:1102)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBean.instantia
te(WorkflowProcessorBean.java:704)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanImpl.insta
ntiate(WorkflowProcessorBeanImpl.java:189)
at
com.bea.wlpi.server.workflowprocessor.WorkflowProcessorBeanEOImpl.ins
tantiate(WorkflowProcessorBeanEOImpl.java:105)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.checkTrigger(Even
tListenerBean.java:291)
at
com.bea.wlpi.server.eventlistener.EventListenerBean.onMessage(EventLi
stenerBean.java:241)
at weblogic.ejb20.internal.MDListener.execute(MDListener.java:221)
atweblogic.ejb20.internal.MDListener.onMessage(MDListener.java:175)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:1938)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:1897)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.Kernel.execute(Kernel.java:250)
atweblogic.jms.client.JMSSession.pushEnvelope(JMSSession.java:1784)
atweblogic.jms.client.JMSCallback.pushEnvelope(JMSCallback.java:69)
at weblogic.jms.frontend.FESession.execute(FESession.java:1859)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
I'm using WLPI 1.2.1 and Weblogic 6.0 sp1 with rolling patch 1. SQLServer
2000 is there, but there is no exception in the jdbc log.
I assume this is a bug. Otherwise I think it would be a problem if there
was no way to syntatically or in a stack trace say that the "Exception was
caused by work list task x, etc.."
Thanks for any help.
Ken Rimple

Evaluation Expired - Cannot get CFBuilder to run

I've been trying everything I can think of, but I just can't get CFBuilder to work
I just keep getting "Evaluation Expired" from the stand-alone installation
Or not working at all with a similar message for the eclipse plug-in.
I'm guessing that I screwed up when I installed and should have removed any old CFBuilder beta/pre-release installations.
But I didn't, and now I can't get the released CFBuilder to run
(and I'm in deep with a deadline for this week, I guess I need to fire-up my old Dreamweaver to get the job done)
The old license key/file/.. must still linger around somewhere. Does anyone know where, and if I can just delete it.
It seems a bit harsh to have to reinstall my machine to make this work, so there must (I hope and pray) be something I can do?
What I've done:
- [Plug-in] Installed the released CFBuilder ontop of an old existing CFBuilder installation
Result: Didn't work!
- [Plug-in] Uninstalled CFBuilder
- [Plug-in] Reinstalled the released CFBuilder
Result: DIdn't work
- [Plug-in] Uninstalled CFBuilder
- [Plug-in] Started with a fresh Eclipse installation
- [Plug-in] Installed CFBuilder
Result: Didn't work
- [Plug-in] Uninstalled CFBuilder
- [Stand-alone] Installed CFBuilder
Result: Didn't work
Please someone HEEELP!!!
/Max

Which sucks!
I just got a new MBP, fresh install of everything on a brand new OS install and I still got the same issue
1. Installed Eclipse
2. Installed some plugins (Suclipse, GAE, ...)
3. Installed Flash Builder 4 as plugin (60 days trial)
4. Installed CFBuilder
And after restarting eclipse and trying something remotly related to CFBuilder I get the popup, stating that my eval license has expired, and there's no way to get out of this mode. I own 2 licenses of CFBuilder and I can't install any of them.
Very, very poor first impression of CFBuilder
/Max

Cannot get Bridge to run

Similar Messages

Maybe you are looking for