Cannot Get cfprint to print on custom media programmed in the print driver.

I setup a printer on the server and added custom paper sizes to the print preferences. (i.e. 5.50 x 7.00) I can print on these manually with no issues. When I call the cfprint tag and reference paper="55by7" which is the name of the custom paper size, I get:
Invalid media or paper for the cfprint tag.
Error: Media 55by7 is not valid on ITPrinter. Available media are na-letter,na-legal,Oficio,folio,iso-a4,iso-b5,jis-b5,executive,iso-a5,iso-a6,monarch-enve lope,na-number-10-envelope,iso-designated-long,iso-c5,iso-c6,Postcard 4x6,tabloid,iso-a3,jis-b4,Automatic-Feeder,Manual-Envelope,top,bottom.
I verifiied the account that the coldfusion service is running as has full permissions to the printer. If I change the paper to one on the list above it prints fine. Suggestions?

I believe you have too much RAM installed ( sorry just a little Numbers' humor).
I found if I have print gridlines set in Excel, then the same settings transfer to the Numbers' version. They are _very light_ though. Here is how I change border settings. Select the range of cells, set line type, then number of points and color:
Regards,

Similar Messages

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

I have recently upgraded to mavericks and I cannot get my scanner to work. I tried deleting the printer and reinstalled it but no luck

Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

How can I get iTunes to re-locate my media content on the hard drive, after a failed attempt at copying the library to an external drive?

Long story short, I attempted to use an external drive to house my iTunes library to relieve some storage space on my MBP hard drive. The external drive was formatted as FAT32 and it got hung up on an HD movie in excess of 4GB in size. I had to reformat the external drive as MacOS Extended (Journaled) to solve that problem....but then the bigger issue showed up....
While reformatting the external drive I switched iTunes back to the original library location on my local hard drive. Unfortunately, iTunes doesn't recognize all of my content that did manage to get copied to my external drive in the first attempt to transfer content to that external drive. Nearly 2200 files have exclamation points next to them. Here is my question: Can I get iTunes to re-locate all of my content at once in the original iTunes files on my local drive without having to "locate" each of the 2200 files one at a time??
HELP!

try if this script works for you:
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."

Print a custom Error message in the XML bursting program's log file...

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

Hi,
I having this requirement, where i need to print a custom error message in the xml bursting program's log file.
Actually i am having a report where i create invoices and then those invoices are emailed to the respective customers, now say if a customer has three contacts and there is only two valid email id's so what happens is bursting will be successful for two contacts whereas the third contact dosen't get any emails. when this happens i need to log a message in the bursting programs log file stating a custom message.
Two things i want to know..
1- Whether is it possible to write into the xml bursting programs log file
2- If yes, then how..
note: it ll be greatly appreciated if the answer is elaborated.
thanks,
Ragul

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open. What do I need to do?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

I cannot get my e-mail to automatically enter addresses in the "TO:" box. In the past, I would get a list of e-mail recipients to appear when I typed 1 letter. That function no longer works. Do I need to change a setting or what?

Settings > Store > Sign Out.
Sign in with the correct ID.

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up

I have a new iMac with osx 10.8.3 i can not get my hp laserjet m1522nf scanner to work. The printer works but when in scanner mode the scanner does not show up.I tried to install the newest hp driver for the printer but when I install the computer ca not find the printer.

Repair permissions and restart your computer.
Make sure you have the updated scanner drivers installed.
Install the gimp drivers: http://gimp-print.sourceforge.net/MacOSX.php
http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer
http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
What to do when you can't print

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why?

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why? The printer is an Epson 4900.

I contacted Epson and the following steps resolved the problem.
Please close all of your programs to Repair Permissions:
1. Go to your Mac Hard Drive > Applications > Utilities and open the Disk Utility.
2. Click on and highlight your main Mac Hard Drive in the list on the left.
3. Select Repair Disk Permissions and once this is finished, restart your computer.
Once restarted, please do the following:
1. Open your System Preferences
2. Open Print & Fax (10.7/10.8/10.9 is Print & Scan)
3. Highlight your Epson printer in the Printer List on the left hand side of the window if it is showing in the list. If it is not showing up, continue to step 5
4. Click on the MINUS sign below the Printer List and confirm deletion of the printer
5. Click on the PLUS below the Printer List to re-add the printer
6. Click on and Highlight the Epson Printer in the window and confirm that in the USE field it reads for "EPSON XXXXXX"
7. If it does, click ADD and the printer should show up again in the Printer List and you can try to print again
If you are still having issue, try printing from Apples Preview and see if it print fine. If so, the issue would be PS and/or LR and you would need to troubleshoot the program installation.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. or Canada Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Why can't I get my printer to print out a playlist from i-tunes? It used to work but now my printer doesn't seem to receive the "print" command.

Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!

I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott

HT1338 In my e mails, I cannot get to a web page that is mentioned in the body of the e mail

In my e mails, I cannot get to a web page that is mentioned in the body of the e mail.

That's probably a bookmark you have saved in Favorites.
Tap bookmark icon>Favorites>Edit>Delete the bookmark

How can I get Acrobat Reader X to send my pdf to the printer?

My pdf just looks at me while I push all of the buttons, file menus and keyboard shortcuts associated with printing and it does nothing. No dialog box, no nothing. All three of my printers work and i've tried them all. It just doesn't do anything. Any suggestions? I really need help here.

From: Pat Willener [email protected]
Sent: Monday, July 30, 2012 9:16 PM
To: vinniereed
Subject: How can I get Acrobat Reader X to send my pdf to the printer?
Windows 7; Acrobat Reader 10.0; local and online.
Thanks,
Vinnie
Re: How can I get Acrobat Reader X to send my pdf to the printer?
created by Pat Willener <http://forums.adobe.com/people/pwillener> in Adobe Reader - View the full discussion <http://forums.adobe.com/message/4588698#4588698

I cannot get my iMc to switch on - seems stuck on the grey background with Apple logo

I cannot get my iMc to switch on - seems stuck on the grey background with Apple logo

Restart holding the Option key and see if you can select the Macintosh HD as the startup disk in Startup Manager.
Startup Manager: How to select a startup volume
Alternatly if your running a per 10.7 Lion iMac, insert the original Install Disc or Snow Leopard Upgrade disc, boot from it and running Disk Utility Repair Disk.
Troubleshooting Mac OS X installation from CD or DVD
If your running Lion without a disc, use Lion Recovery.
Apple - OS X Lion Recovery - Introducing Lion Recovery

I cannot get my FaceTime to work it keeps giving me the registration error

I cannot get my FaceTime to work it keeps giving me the registration error

You need to log in with your official Apple ID. Have you tried that?
Clinton

I cannot get Bluetooth to work on my iPhone 4. The wheel just spins. What can I do?

I cannot get Bluetooth to work on my iPhone 4. The wheel just spins.

The device you are trying to pair with must be in pairing (discoverable) mode. You can not pair with other mobile phones or computers (except for tethering).

Cannot Get cfprint to print on custom media programmed in the print driver.

Similar Messages

Maybe you are looking for