Cannot get Dreamweaver CS5 To work properly

I have installed and uninstalled Dreamweaver CS5 several times, I have deleted the config file and still cannot get Dreamweaver to work properly. When I start dreamweaver CS5 the spash screen doesn't display properly, when the program opens up I am unable to manage sites all that is visible is the text box for site name and site address, nothing else is visible.
I have run a registry clean program to remove any traces of previous versions of dreamweaver to no avail. I do not receive any error messages at any point dreamweaver will just not work properly.
Thank you for your assistance.

Registry cleaners don't remove everything. Many files are in hidden folders within the user accounts on the operating systems. Have you tried the clean tool?
http://www.adobe.com/support/contact/cscleanertool.html
Also, something else to consider, try making another user account on the computer and see if that helps. I've seen user profiles on computers become corrupt and can cause this issue as well.

Similar Messages

Cannot get OSX Server to work properly

I've followed various tutorials online in a bid to set up a home server.
I thought I'd got everything right until I tried to login to a 'new user account' via the 'other selection' on the login screen of my mac mini.
I don't know where I've gone wrong. Has anyone had this problem?
Users can screen share the server or remotely connect to folders but they can't log into the mac mini server or via other devices

I'm not sure what it is you're trying to do. Can you explain what Server services you're running and what you're trying to do with them?
For example, I could describe how to access FTP and Wiki services, but that wouldn't help if you aren't running those services.
I had to revise my initial Server install to properly configure my LAN. The best advice received was from MrHoffman, and that was to get DNS service properly configured on the LAN.
I had been pointing to DNS servers outside my LAN. The proper way was to first choose a subnet (MrHoffman advised against using the ubiquitous 192.168.x.x and use 172.16.xx or 10.x.x.x instead), then configure forward and reverse lookups manually. (I had to delete those initially configured by Server and reconfigure my own.)
This link should help: Hoffman Labs. The description for DNS configuration is for an earlier version of Server, but it works with Mountain Lion Server as well.
Essentially, each client should be configured to point to your Server's LAN IP for DNS service. The Server should be configured to point to itself for DNS service, specifically 127.0.0.1 instead of its LAN IP address. Make sure you run the tests to make sure DNS is configure and working properly.
If that doesn't help, you'll have to provide more detail on what it is you're trying to do.

Motion 3.0.1 - cannot get point tracker to work properly with mask -Help

I can't get the behavior called point tracker under shapes category to properly work with a mask. Motion either quits unexpectedly with the message or goes into "not responding" mode.
Here are the steps: I set up the foreground and background shots in Final Cut Pro 6, then "sendto" motion (embeded checked).
In Motion I create a simple mask around the foreground object (talking head). With the playhead at the start of the clip, I go the behaviours - shapes - point tracker and apply to mask.
Next in Inspector I check tangents and then analyse. This can take a long time.. When it completes I save and go back to Final Cut. Final Cut then quits unexpectedly after about 10-15 minutes in beach ball mode. If I exit Motion and try to re-open the project, Motion also quits unexpectedly.
What is going wrong? Please help?

giggles200742 wrote:
I have tried the forced removal, as per many instructions here. I did NOT dl the Beta 10.1.
With "forced" removal, do you mean using the -force option? This is only for the 10.1 beta removal; it has no effect on the uninstall of the released version.
To uninstall the released Flash Player version, download the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html and save it to disk.
Next, download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk.
Now close all browser windows, then run the downloaded uninstaller. If you want to make sure that everything related to Flash Player is removed, run it with the /clean option.
Now reboot Windows, then run the downloaded installer.

After MOBO exchange cannot get Satellite A200 to work properly

HI guys,
I have a Satellite A200 here, my friend took it to pc place and they told him it couldnt be fixed and needed a new mother board... well I managed to fix it and also connect it to the internet (Ive fixed a few PCs) anyway I did all the updates then it took forever to shut down.
Now it wont load it just says loading thats all. Or I get a black screen and now it doesnt want to load.. I cant get in to do a restore or do a hard drive test. Do u suggest anything?
I downloaded recovery disks the other night n they dont seem to want to work either. b4 I got it working I somehow got in and did a recovery or factory default software then it worked but I cant remember how I got I there lol.... any info will be helpful..and thank u in advance
Its running windows vista

As far as I know recovery disc cannot be downloaded so I dont understand what have you done exactly.
Anyway if the notebooks hardware is OK you can install OS using original recovery DVD disc or install OS using original Microsoft installation disc.
If you have this original recovery DVD (ask your friend if he/she has one) use it for OS installation.
If you use Microsoft disc all necessary drivers you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
If you have more concrete questions you are welcome.

I Cannot Get Flash Player to Work Properly

The Basics :
Im Running Windows XP Home Edition Service pack 3
I have IE7 (I had IE8 But was told that this was the problem so I went back to IE7)
Problem:
Everything worked fine until a couple days ago, then it told me to do a flash player update and that is where everything went to hell in a handbasket.
I can no longer access sites that require activex (IE: Farmville, Cafe World, and other apps on facebook). As I previously stated everything worked fine until I did the update. When I dl and install the Flash Player again I reboot and then go back to facebook and try to view the pages again but all i get is the message its not installed and at first I would just click the click here link and try to reinstall. Now I dont do anything but exit the page, uninstall and try again. I really don't know what else to do.
What I have Done:
I have uninstalled Flash Player, reinstalled it at least 10 times. I have tried the forced removal, as per many instructions here. I did NOT dl the Beta 10.1.
I have removed IE8 and reinstalled IE7.
Please can someone help me get out of this stupid loop. Im getting so frustrated.
Thanks
Giggs

giggles200742 wrote:
I have tried the forced removal, as per many instructions here. I did NOT dl the Beta 10.1.
With "forced" removal, do you mean using the -force option? This is only for the 10.1 beta removal; it has no effect on the uninstall of the released version.
To uninstall the released Flash Player version, download the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html and save it to disk.
Next, download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk.
Now close all browser windows, then run the downloaded uninstaller. If you want to make sure that everything related to Flash Player is removed, run it with the /clean option.
Now reboot Windows, then run the downloaded installer.

I am receiving a unexpected and unrecoverable problem error a cannot get Photoshop cs5 to work

I read in one of the post to delete roaming profiles - could someone give clear step by step instructions on how to delete the roaming files? I searched google and keep get answers about servers - running windows 7 Thanks

Deleting "roaming" files sounds like a terrible idea. On Windows, your User setting files are divided into "Local" and "Roaming". If you delete all the files in "Roaming" you will be removing all of the settings from all of your application. Everything will be returned to default. While this shouldn't be particularly damaging, as these files will just be recreated at the next launch of the applications), you may lose a lot of time resetting everything to your liking.
A much better idea is to create a new user account. The new user account will start with an essentially empty Roaming folder and allow you to test whether there is something wrong with your current settings (as stored in Roaming) that is causing this problem in Photoshop. If you find that Photoshop runs fine in the new user account, you can follow these directions to proceed: Troubleshoot unexpected behavior | User account-specific | Adobe software | Windows 7, Vista

Cannot get voice mail to work properly.

I have a Galaxy 5S, I have deleted all my voice mail messages but the screen still says there is one. When I push 7 it tells me there r none to delete. I have shut my phone down 3 times hopi g rebooting would help, but doesnt

Perhaps you can try to take out the sim card after powering down. Wait a min or 2 and reinsert SIM then power on. If that doesn't work, sounds like it is another of the widespread issues and bugs in 5.0, unless you haven't updated to 5.0 yet. On a related note, but different phone, I had a similar issue and called my VM and slowly went through option 7 to delete messages just to make sure. I also had to have a data connection, for some reason, for the icon to disappear.

I have an HTC Desire and cannot get flash player to work properly

I have tried everything. Could someone please send me a link right to the file I need and also the install directions

giggles200742 wrote:
I have tried the forced removal, as per many instructions here. I did NOT dl the Beta 10.1.
With "forced" removal, do you mean using the -force option? This is only for the 10.1 beta removal; it has no effect on the uninstall of the released version.
To uninstall the released Flash Player version, download the uninstaller from http://kb2.adobe.com/cps/141/tn_14157.html and save it to disk.
Next, download the offline ActiveX installer http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk.
Now close all browser windows, then run the downloaded uninstaller. If you want to make sure that everything related to Flash Player is removed, run it with the /clean option.
Now reboot Windows, then run the downloaded installer.

Cannot get QT Pro to work properly

I am just getting a white screen on playback of hi-res QT movies. they play on other systems. I know there has been a lot discussed about this, but nothing I have tried has solved the problem so far. any advice?

White playback window means you're missing the required video codec.
Installing the missing codec would allow playback but some codecs can't be installed without also installing the software that uses them
FCP allows export using some high end editing codecs and those files could only be shared and viewed with Mac's that also have FCP.
Easier method is to export from FCP using the H.264 Video codec for HD files.

CanNOT get Remote application to work properly!!!

I give up! I have tried e/thing... turning off/ on router; turning off firewall, security software, have set in preferences to look for other remote, etc... nothing! Specifically, this is what happens: I download application and in itunes my phone is not recognized in the device list... so I can not enter the password/code. Another PC in my house running identical software as this PC has no problems at all using his application! Of course, both pcs are on the same network!
I am lost Any help? ThxS!!

Registry cleaners don't remove everything. Many files are in hidden folders within the user accounts on the operating systems. Have you tried the clean tool?
http://www.adobe.com/support/contact/cscleanertool.html
Also, something else to consider, try making another user account on the computer and see if that helps. I've seen user profiles on computers become corrupt and can cause this issue as well.

I cannot get a download to work properly on farmville. I can't see anything.

I have downloaded the plugin and it tells me that it was successful but it always says it is still crashed and all I can see is the black screen. Can someone tell me why?Fa

Hi,
First of all you have to assign a static ip address on computer on which you have to host games, like
ip: 192.168.1.10
subnet mask:255.255.255.0
Default gateway:192.168.1.1
Then need to forward ports used by the mentioned games on your routers firewall, to this static ip address.
Ports used by Counter Strike:
1200 set as UDP.
27000 - 27015 set as UDP.
27020 - 27050 set as TCP.
Ports used by Garry's Mod:
27015 UDP
27015 TCP
27020 UDP

How do I get "Vanishing Point" to work properly on iMac Retina 5k

How do I get "Vanishing Point" to work properly on iMac Retina 5k? When I "render grid to photoshop" the grid is not in right place and scale. I'm using latest version of CC.

OMG! What a load of crap and thank you for posting this. I spent 3 solid hours to do something that I have done hundreds of times before, apply a Vanishing Point filter. I kept thinking I had some non-default setting on and was literally screaming at my new iMac. I NEVER thought it would be the cause. It was actually easier to reinstall CS5 on an older Mac and just do the stuff I needed. This is crazy. I fully get why Adobe doesn't support this yet but to not make a huge deal out of it so people know about it is just wrong. When I searched for Vanishing Point on the Forums, this thread showed almost the bottom of the first page. It should be stuck to the top until they fix it.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

You can go to the Apple online store and purcahse a copy of Mountain Lion. This will give you a redemption code, which you can use to download Mountain Lion from the App Store. Unfortuantely, I'm not aware of any other way to legally purchase it. I have never seen Apple release Muontain Lion on DVD.
In terms of Apple Service, they just need the serial number of the machine to check the purcahse date. It is usually correct, to within a few weeks. A quick Google search should give you the correct number to dial.
I hope this helps.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help. Thank you.

I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

Cannot get Dreamweaver CS5 To work properly

Similar Messages

Maybe you are looking for