Cannot get filezilla to work on mac 10.5.8

I have downloaded the file from the filezilla website, however after unarchiving the file, when I try to open it, an error reads "failed to write xml file" I've tried other FTPs but they don't work very well.

I would contact the developers for advice.
One FTP application that works well with Mac and Leopard is Transmit:
http://www.panic.com/transmit/
Two good places to look for alternative software:
http://www.versiontracker.com/macosx/
http://www.macupdate.com/

Similar Messages

  • Just bought Harmon Kardon soundsticks III cannot get it to work on mac mini

    Hi
    Just purchased the Harmon Kardon soundsticks very nice looking but does not work with my mac mini.  Connected it up as per manual instructions plugged it in line in cable to line in but no sound.  Went into system preferences to check to see Input (Line In) Output (Internal Speakers), is there something I am not doing correctly.  My other speakers which has decided to retire through old age was picked up perfectly.  Can anyone help.  Incidentally I am using an audio jack not usb.
    Thanks
    rachealfromva

    Hi,
    Thanks for replying, I am unable to change to line out I have no options, the only way that I have been able to get t he speakers to work is by plugging into the headphone jack. Is it possible the sound card is broken?
    Any suggestions would be much appreciated
    Thanks
    Rachealfromva

  • Cannot get sound to work on Mac Book Pro.

    MaBook Pro. OS X.  Version: 10.6.8 Sound won't work. I have gone to system preferences and checked "sound"--that seems to be fine.

    There may be a resolution through use of the System Management Controller (SMC)
    •Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    If the use of a headphone and the audio jack in the computer does not gain access to
    sound output, (indicating other issue, if it does) then the SMC may help reset the Mac
    since the issue may be software, hardware, or both to a minor degree.
    And if those don't work you may have to contact an Apple authorized service provider
    for testing, diagnostic, and/or repair purposes. If you manage to set a Genius appoint-
    ment at an Apple Store, they may be able to perform diagnostics on this issue.
    •OS X Mavericks: Reset your computer’s PRAM  - works w/ other Mac OS X versions.
    Hopefully the reset SMC - or perhaps reset PRAM - may help.
    Good luck & happy computing!

  • HT1338 I have been an avid Pandora user since I purchased my mac. now all of a sudden I cannot get It to work. I know it is a mac issue because I am listening to it on my pc right next to my mac . Help

    I have been an avid Pandora user since I purchased my nac today I downloaded some up dates in Iphoto and now I cannot get pandora to work. I know it must be the mac because I can still get it to load on my pc.. Help

    Have the pics allways been used off the external drive?
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    Is Spotlight indexing that drive, or is it used by Time Machine?

  • I cannot get my Calendar on my Mac to sync with my phone.  My work exchange calendar is synced.

    I cannot get my calendar on my Mac to sync with my Iphone.  My work calendar which is exchange is sync'd but i REALLY need my personal one to as well.

    How are you trying to sync?

  • Cannot get PhotoStream to work on the Mac

    Any ideas on this?
    I'm running Lion latest build, latest iphoto but PhotoStream will not enable. Its on in the iCloud preferences, but for the life of me i cannot get it to work.

    Came across the same odity.
    Remdey for me was:
    1. quit iPhoto
    2. open System Preferences and go into the iCloud prefs
    3. enable Photo Stream
    4. open iPhoto
    It didn't seem to work instantly with these steps, I have switched it off once and back on again, but I think iPhoto was open somewhere in the procedure.
    No restart was required.

  • Cannot get CS3 photoshop on my mac os10 to open my canon rebel T1i .CR2 files

    I have spent hours downloading a variety of stuff and still cannot get  CS3 photoshop on my mac os10 to open my canon rebel T1i .CR2 files. I  have downloaded the Camera Raw 4.6 plugin. Photoshop acknowledges that  is the version installed. But it won't recognize the .CR2 file type.  When I say show me all files, the files show up in the open file dialog,  and the thumbnails look right, but when I open the file it is munged. I  also installed the DNG Converter, which also does not recognize the  .CR2 files.
    Has anyone figured this out yet? It has been almost a year. I don't want to upgrade to CS4 or 5 or buy Lightroom.

    The Adobe DNG Converter 6.2 will open your files, if you have an uncorrupted download and use it properly.  No doubt about that.
    Once you launch it, be sure to target a folder containing raw files, not the raw files themselves.  At least on the Mac, the DNG Converter works on folders, not on individual files.
    Alternatively, you can try dragging and dropping the individual raw files onto the DNG Converter icon.
    Some routine maintenance may be overdue on your Mac, such as Repairing Permissions with Apple's Disk Utility, running Onyx or Cocktail, etc.
    Wo Tai Lao Le
    我太老了

  • I have a Macbook Pro with Retina Display and I cannot get FaceTime to work

    I cannot get facetime to work on my macbook pro

    Hello xMaddiex,
    The article linked below provides some useful steps that can help get FaceTime working on your MacBook Pro.
    FaceTime for Mac: Troubleshooting FaceTime
    http://support.apple.com/kb/TS4185
    Cheers,
    Allen

  • Cannot get "Airtunes" to work...

    I have an APBS with a new Aex set up to join my wireless network. But no matter what I do I cannot get "Airtunes" to work. It will intermittently send audio but not in any way even remotely continuously. I thought I would try changing the channel but there is no option anywhere that I can find except for the APBS itself. What's worse is that the Airport Utility only picks up the Aex about half the time even though the green light is on. I've never had so much trouble with an Apple product before. I must be missing something here....
    FWIW, I have a Mac Pro with no wireless that is connected via ethernet to a netgear router. The APBS is also connected to the router and appears in Airport utility with no issues. I also have a Macbook Pro which can "see" the APBS all of the time but the Aex only occasionally. I have reset the Aex and reconfigured it several times to no avail. Possible I suppose that it is "broken" but I am hoping I am just overlooking something....

    Ok, thanks for clarifying your networking equipment for me. I assume that you have the 802.11g AirPort Extreme Base Station (AEBS) configured as a bridge to allow the Netgear to provide both NAT & DHCP services for the entire network ... correct?
    If so, then streaming from the Mac Pro would go something like the following: Mac Pro > Netgear > AEBS >>> AXn, where ">" represents a wired connection and ">>>" a wireless one. The "weak" link may be the wireless one between the AEBS and the AXn.
    Since the AXn is joining the AEBS' wireless network, you will not be able to change the radio channel on it because it is performing like any other wireless client on the network. Instead, you would change the radio channel on the AEBS. If you don't already have it, I suggest downloading a copy of iStumbler to calculate the SNR at the location of the AXn to see if it is getting a strong enough signal from the AEBS for a solid connection. iStumbler will not run on Snow Leopard, so you will have to run it on the MacBook Pro. SNR = Signal - Noise. You can get these values from iStumbler. You will want a SNR of 25+ at the location of the AXn. Using the MacBook Pro, I suggest taking measurements near the AEBS and then along the way until you get to the AXn. You may find that moving the AXn just a bit in order to get the best SNR value.
    You can also use iStumbler to determine if there are any competing Wi-Fi nearby; note their channel(s), and signal values. Then, if appropriate, choose a channel for your network at least 3-5 channels away.

  • I have installed trial but I cannot get it to work

    I have installed trial but I cannot get it to work. Help

    Reader is a free program and therefore has no trial version.
    And if you want help, you must provide appropiate information. We don't know if you are in a Mac or a Win machine, or what program (and version) you are talking about.

  • I downloaded the TDS managed IP Hosted Assistant Toolbar 17.4.86.1 and I cannot get it to work on Firefox.

    I downloaded the TDS managed IP Hosted Assistant Toolbar 17.4.86.1 and I cannot get it to work on Firefox. It says it is fully compatible but I downloaded it like the instructions said and it will not show as a toolbar option for Firefox. Please help and I am trying to not use IE at work as we run XP. Thanks.

    I'm surprised companies still use XP. My old school already switched to 8.
    Actually, if you're experiencing problems with an addon/extension, you would better off asking the developer about it since Mozilla nor us volunteers have anything to do with the extension not working. I would suggest Safe Mode to see if that addon is being conflicted with by another addon but I don't want to give you wrong steps.
    If you want to try Safe Mode, feel free to:
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
    If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

  • I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open

    I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate  version.  I have 8.1.2 but it will not open.  What do I need to do?

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
    LN

  • My apple ID password works for all of my devices but one.  i only have one account and have changed the password several times but still cannot get it to work on my iPhone.  any suggestions would be appreciated.

    My apple ID password works for all of my devices but one.  i only have one account and have changed the password several times but still cannot get it to work on my iPhone.  any suggestions would be appreciated.

    Thanks for the suggestion, Chris.  I actually did not resolve the issue which is why i did not post an answer. 
    it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used). 
    even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps.  however, it does seem to use the correct ID when i attempt to purchase new apps.
    If someone actually had an answer to correct this, i would love to update my existing apps. 
    Thank you.

  • Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found."  Problem also seems to be affecting iCloud aand Music Match.

    Cannot get Genius to work - Always get same error message - "Genius results can't be updated right now. The required file cannot be found."  Problem also seems to be affecting iCloud aand Music Match. Can anyone help me with this?  What file is missing and from where?

    This is a known problem with Windows 7 Enterprise using certain Group Policy settings. Solution for me was to use another machine running Windows 7 Ultimate.

  • How can I switch on my Apple TV speakers when it asks "multiple speakers" I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work?

    How can I get my Apple TV airplay to work from my PC.  On the airplay symbol it says Multiple Peakers please choose but I cannot switch off my computer speakers and switch on my Apple TV speakers so cannot get airplay to work from my PC.  Everything is OK when using my Ipod touch.

    Don't use Multiple Speakers option and just choose the AppleTV
    What are you trying to Airplay? If it's iTunes content it's simpler to 'pull' the stream from the Computers icson on AppleTV by selecting the libarry and media.
    If you are attempting to Airplay the desktop you can't.

Maybe you are looking for