Cannot get FSB over 203, help please :(
Specs in Sig.
I gave my ram 2.8V and left the timings on auto. AGP is set to 67. Even if I bring the multiplier down I cannot get above 203FSB without restarts before I can even get into Windows XP Pro.
This is really disheartening, especially since I upgraded from a MSI K8T800(which I could barely OC on) in order to overclock. Everyone told me the reason I couldn't was because of the lack of AGP/PCI locks.
Quote
Originally posted by kreepindeth
Quote
Originally posted by rsheppick
Quote
Originally posted by kreepindeth
2.5-2-3-2 @ 2.75 Vdimm
This an impossible timing?
Sorry, I have million people msg me for help with their hard drives for some reason
Try my first post 3-4-8-4 @ 2.75Vdimm
If you have 2 dimms try with only 1 if these super loose timings don't work.
Tried it, those are the timings I could not boot at all from. Had to reset CMOS. I only have one 512MB dimm.
Try those timings but lower the cas to 2.5
Similar Messages
-
I cannot do upgrades or buy apps as it keeps asking me to verfy my password by email but I cannot get Apple to send the email. I have tried repeatedly. Help please.
I seen this many times, and in just about all cases, it's the user resetting a different AppleID than what's being used for the iTunes account.
-
Hi, I was wondering if someone could help me, I recently restored my itouch 4th Gen and was then told to upgrade to itunes 10.6 now everytime I try and install itunes I get the following message, help please!
Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.Error writing to file: C:\Program\Files\iTunes.Resources\de.Iproj\SortPrefixes.plist. Verify that you have access to that directory.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
OTM-Cannot get a connection from helper after 120 seconds.
Can any one tell me how to fix the problem of ,
OTM not able to run the scripts, and getting the following error:
"Cannot get a connection from helper after 120 seconds. "
I have tried un-installing and installing all the services , actually its happening for helper service,but at the same time
Its working when we use OpenScript, with out any such helper issue but when we use to run the same script using OTM , the above mentioned error message is getting displayed.
Please let me know a solution, if any one has made a fix for this.
Thanks in Advance
AtishHi,
Step1: Uninstall ATS products and Oracle XE database
Step2: Remove/Rename the following folders.
Remove/Rename ATS install directory (e.g. C:\OracleATS).
Remove/Rename the directory: C:\Documents and Settings\username\osworkspace (depends on your Operating System, it may look like: C:\Users\username\osworkspace)
Remove/Rename the directory: C:\Program Files\Oracle\Inventory ( depends on your Operating System, it may look like: C:\Program Files (x86)\Oracle\Inventory)
C:\Windows\rsw.ini
Step3: Remove the following Services (if services exist)
Start -> Run. Enter "cmd" Type the command: sc delete servicename
Oracle Application Testing Suite Application Service
Step4: Remove the Registry Keys (if exist)
Start -> Run. Enter "regedit" to launch Registry Editor. Remove the keys below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle Application Testing Suite Application Services
HKEY_LOCAL_MACHINE\Software\Oracle\Oracle Application Testing Suite and Oracle Test Management
Step5: Restart your System
Step6: Install ATS with admin privilege
Regards,
Deepu M -
I keep trying to buy a song on the itunes store but every time I enter my apple id it says "Cannot connect to iTunes store" help please!
Hello seth53,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario -
I have purchased 9 songs on I tune and cannot get them over to my IPOD play list----I have tried to sync them like the old times I have tried dropping them into my IPOD wont take. Can someone explain how I can get these new songs onto my IPOD and out of my purchase list
Do you have the Convert higher bit rate songs to 128 Kbps AAC option ticked from under the iPod's Summary tab in iTunes?
If so, disable it and then click the Apply button in the lower right hand corner to apply the changes to your device.
B-rock -
My touch screen is not responding, I have reset the phone, plugged into different charger and tried to update it to itunes but they will not connect because I cannot put my passcode in, HELP please!
ME TOO. NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
iphone is diabled- connect to iTunes because i forget passcode.
i cannot connect iTunes because it's always asking to enter passcode on iphone.
So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
My iphone is new. No icloud. didn't connect to itune backage.
That's why I try to connect iTunes but it need to enter passcode.
So, my iphone just keep "iphone is disbled-connect to iTunes".
IPHONE 6 PLUS -
I can't open personal accounts on the internet. After entering ID and Password then the enter key, it's as if the screen refreshes itself and wants me to start over. Help Please.
Click here and follow the instructions.
(72059) -
I use Microsoft XP on my PC, where r my pictures from my iPad? I need to know how to send pictures to Walgreens, etc so I can get them printed. Help please!
I am legally blonde and not very tech savvy, so I don't really know how to do that. I know ur time is valuable, so could u possibly give me a short tutorial? I would b very grateful! I use the camera kit to get my pics from my sd card to my iPad and also from my iPhone to my iPad. Had I known I would have this problem, I would not have transferred my pics to my iPad until after I took the sd card and had my pics printed.
-
I transferred excell spreadsheet from my old pc to my new mac. I used it last fortnight but now cannot find it. Any Help please.
I have tried Spotlight but to no avail I have an Imac.
gp140The file should still be listed by name under, "Open Recent."
-
i have recently changed by email login password for my emails i have managed to change them in my setting for my iPad but need to change the settings for my MAC computer but i cannot seem to do it help please?
Mail/Preferences/Accounts
Use the - and + signs to delete or add your new Accounts
see
http://support.apple.com/kb/PH4928
Mac 101
http://support.apple.com/kb/index?page=search&src=support_site.kbase.search&loca le=en_US&q=deleting%20mail%20accounts -
I have an I pad2 and an Epsom printer I have printed off things before on my printer but since moving it and having to switching it off my printer will not recognise my I pad I have tried putting in my security key but half way through doing this the message comes on to the error message saying printer recognised but I cannot get it to print help please
I have done this but it still didnt work but thanks
-
MacBookAir is frozen. Won't turn off. Getting VERY warm. Help, please!
Hi Katharine,
Hold down the power button until the screen turns black.
Then wait about a minute then press the power button once to turn it back on.
If you can't shut it down, if you're in the Walnut Creek I think you are, there's an Apple Store on South Main Street.
You can make a reservation at their Genius Bar in advance > Apple Retail Store - Genius Bar -
OpenScript & ant ssh - "Cannot get a connection from helper after 120 seconds"
Hi, I'm trying to run openscript tests (with runscript.bat file) from hudson. I'm connecting to windows XP machine through ssh and executing batch file, but execution of scipt finishes with error "Cannot get a connection from helper after 120 seconds". This error occurs when openscript tries to run test on Internet Explorer. If IE is not nescessary, test finishes with OK. When running batch directly on windows (without hudson and ssh, but on the same user) everything works fine. Has enyone met with such issue ?
Hi,
What Jules has suggested should work, but I have also used the following to get scripts working from OTM -
OATS Application service - run as a user with local admin rights
helper service - local system
OATS agent service - set to manual
Then, run the agent service as a console app -
1. run a cmd prompt
2. Run c:\> C:\OracleATS\agentmanager\bin\AgentManagerService.exe -c C:\OracleATS\agentmanager\bin\\AgentManagerService.conf
3. Execute the script from OTM
If the agent is running on a machine separate to OTM then the user will have to remain logged in.
Cheers,
Jamie -
Hi when i was updating my itunes on my laptop our kid cacelled it and now i have no itunes any where .how can i get my itunes back HELP PLEASE ?
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/
Maybe you are looking for
-
I'm running a WLS 6.0 SP2 clustered application on HP-UX 11i. I'm seeing heap and thread issues on start-up or invocation of my application as I deploy EJB's and create DB connection pools. These are fairly trivial tasks
-
WRT54G won't go online...
I had to reformat my laptop because I had a rootkit virus. I also reset my router & now it will not recognize my internet connection on either computer. When I run the wizard, even tho my dsl modem says it's connected and the router is lit up as it
-
What monitors work well with apple computers? And what do I need to connect to the computer?
-
Why dose not see the call waiting notification when other party in a call with some one ?
why dose not see the call waiting notification when other party in a call with some one ?
-
Determining the ODBC data source from a Subreport - VB6, CR8.5 OCX
I am using Crystal 8.5 OCX and VB6 to run some reports. Users run reports on different databases with the same table structures. All run from ODBC sources that change in name also. The reports are just rpt files on the hard drive that are run when