Cannot get gpo to work on the domain - server 2008 standard r2

gpreport.txt attached thanks for the tip i was in the wrong directory as it was a vm it does that when opening cmd!

please can i get some help with this issue it's been going on for weeksno matter what i do i cannot get this simple gpo to install adobe flash player active x onto a test pc in an ouit works fine in my hyper v lab environment so it must be the messed up way it's setup on the real domain where someone else set it up before me, i've attached 5 screenshots joined together as 1 picplease help me understand this situation i've read so much about group policy and still cannot work this simple task out, i'm having to get round software installs in bulk by using psexec and i'd rather do it through gp
there's a pic of a working gpo called document redirection that i put on here for reference, the one i cant get working is the adobe flash player active x onealso, on the lab environment i haven't had to add anything in the user settings just the...
This topic first appeared in the Spiceworks Community

Similar Messages

It used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

it used to be that when I created a pdf from a word or publisher document, hyperlinks worked fine. Now I cannot get them to work unless the text displayed for the link is the complete address and it all appears on one line. Why?

You can print to the Adobe PDF printer, but that only creates links that Acrobat or Reader recognize as such. That is the reason for needing the entire URL on one line. It is not actually an embedded link, but one created by Acrobat on the fly. With OFFICE 2013 you have two choices: 1. create the PDF with the print to Adobe PDF and then add the links in Acrobat so that they are complete or 2. I think the WORD save as PDF or XPS will create the PDF with links, but not sure. If so, that would be the quickest solution for you, but be aware of potential problems with the MS plugin.
Of course, the third option is to upgrade to XI which can be done with AA 9. You will probably not be eligible for a for an upgrade to whatever the next version will be.

Cannot get PhotoStream to work on the Mac

Any ideas on this?
I'm running Lion latest build, latest iphoto but PhotoStream will not enable. Its on in the iCloud preferences, but for the life of me i cannot get it to work.

Came across the same odity.
Remdey for me was:
1. quit iPhoto
2. open System Preferences and go into the iCloud prefs
3. enable Photo Stream
4. open iPhoto
It didn't seem to work instantly with these steps, I have switched it off once and back on again, but I think iPhoto was open somewhere in the procedure.
No restart was required.

How can i get a link to download windows storage server 2008 standard

how can i get a link to download windows storage server 2008 standard

Hi,
Please find the below link for storage server and its resources.
Windows storage server
Regards, Ravikumar P

WPS54GU2 printing to parallel printer with Windows 7 64-bit-cannot get it to work for the life of me

Hello,
I am having the worst difficulties getting the WPS54GU2 to print to a HP Laserjet 4L printer. I know that the general communication is working as I am able to print a test page from the
I have the IP address correct for the print server (in my case it is 192.168.1.103) and is set statically in the print server setup.
I have it working fine on an XP box The port name configured on the XP machine is LK89A0B5_P1.
The software that comes with the WPS print server will not install on Windows 7 so the address/port/queue must
be set up manually.
I have tried the link from Cisco's KB that shows how to configure the print sever:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=69efd80e2ea44d948fea2365d3e0c9eb_Configuring_TCP_I...
however this does not work and the print job either gets stuck in the print queue, or it shows busy/error in the print queue.
I have also tried suggestions on this forum that say not to create a TCP/IP port but instead use LPR port.
Can someone please give me the solution that will work. I have heard people say to use L1 for the queue name, or P1, or LP1
or lp1. I cannot spend much more time on this before I give up and look for a different print server that will work with both parallel and USB printers.
Thanks for help/suggestions on this.
Mike

sometimes it needs the device- specific drivers to get it to work; especially that you have a 64- bit OS.
the print server is already connected to the network, right? what is its IP address? check if the computer can ping that IP by going to start> search> cmd> ping 192.168.1.78 (change this to the correct IP address). if your computer can ping the print server then you can setup LPR printing to get your printing jobs done. click on the link below for more info.
Setting up LPR Printing on Windows 7

TS4268 I have two IPad registered in my name. I would like to leave one at home with my husband and call him on FaceTime while I travel. I cannot get this to work between the two iPads. What am I doing wrong?

I have an old IPad 2 and a new IPad. They are both registered to my name . I would like to leave the old one at home with my husband and call him on FaceTime when I travel. I have tried this at home with the two iPads and cannot seem to get it to work. Any ideas?

Hey Lft1033,
You'll want to have your husband sign up on the older iPad with his own Apple ID. First, on the old iPad, sign out of your Apple ID:
To sign out of your Apple ID
Go to Settings > FaceTime, tap your Apple ID, and select Sign Out.
Then, sign in with the other Apple ID, and that should work. If it doesn't work after having separate Apple IDs on each iPad, check out the following document where, towards the bottom, there is a "Troubleshooting FaceTime calls" section:
iOS: Using FaceTime
http://support.apple.com/kb/HT4319
Have a good one,
Delgadoh

Cannot get camera to work for the first time.

I cannot get the camera to work . I have the IPad2 and just tried to use it this week. Have tried turning on &off and nothing is working. The video will not come on either. Any ideas.

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset (if that wasn't what you meant by turning the iPad off and on) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I cannot get AirPlay to work on the latest MacBook Air?

I have the latest Apple TV and the latest MacBook Air yet I cannot get the Airplay icon to appear on my MacBook Air.

can the atv see the computers sharedlib?
can the atv access youtube and the likes?
if non of those things then likely the problem is that the atv don't have a network connection

I cannot get anything to work with the iPhone Configuration Utility

I have to set up 30 ipad 2's with restrictions set on them for the students...i created the configuration profile and click install and nothing happens...i have been to the extensive (two article) help tutorial...i have done everything it says to do...i cannot email the config to them because we don't want them using email...so not wanting to set up 30 ipads with an email addy...was wondering if there was another program with better tech support articles and is easy to set up and use...this is kinda useless...

Jaheedi, it sounds like you've tried a lot to make this work....my experience has been that in mlost cases if a profile fails to install it is usually due to a required payload not having been configured. It can happen if a payload category gets opened(General for example) inadvertently and then payloads within that category are not completed.(Identifier for example), then the profile will fail to install. Also, I've only got it to reliably work over a USB connection ( we use encrypted profiles with a "with authentication" removal option).....you might try installing a very basic profile with just the General Payload category expanded ( and required payloads completed) and see if that works..if that works, it probably is one of the other categories is incomplete. If you haven't tried the above, I hope this helps a bit.

I cannot get homesharing to work on the new itunes.

Both computers are authorized, they are on the same connection, I've checked everything. It used to work, but they were updated and now they won't work. Before moving out I transferred half of my library but after I came back to get the rest of it and it won't work. It's making me really upset! I go back to school in a week and I want the rest of my music! What the heck itunes!

I don't know if you need to turn Home Sharing back on or recycle through Off an On for both Machines.
File> Home Sharing > Turn on Home Sharing
Or if it is not running the
File > Home Sharing > Turn on Home Sharing
With my wifes machine I was only seeing part of her library. Stopped and started Home Sharing and it was fine.

The bonjour service has been disabled and i need it for sharing. I cannot get it to work with the services directions. It keeps telling me services stopping. HELP!

Bonjour has been disabled and i do not know how to enable. Been in the services and followed the instruction without results. Help. Thx.

Using Windows Firewall currently - Bonjour is ticked as an exception so it should be ok... but still no luck

I cannot get cs2 to activate because the activation server was taken off line.

I purchased CS2 but use it infrequently. Recently, I tried to start the program and was requested to activate (reactivate) the software. I had the serial numbers but the online activation service is no longer available. I googled the problem and believe somehow Adobe is providing serial numbers or otherwise trying to enable software to run, since it was already paid for.... Any direction or input on how to resolve this issue would be much appreciate. joe

Error: "Activation Server Unavailable" | CS2, Acrobat 7, Audition 3

How can I get Live TV working on the new Android app

I have FIOS for internet and TV but do not use the Verizon router for WIFI (it is too slow and does not cover enough of my house). I just downloaded the new Android version of the My FIOS app with Live TV, but it will not let me view TV and tells me that I have to be connected to the FIOS router. The router I use for WIFI is connected to the FIOS router via ethernet. The app has asked for and received my Verizon credentials. So why won;t the app let me watch Live TV?

I have the same setup and the same issue.
Looks to me like the app isn't smart enough to make the double hop to the VZ router.
I changed my connection to connect directly to the VZ router and at least it now attempts to connect but still cannot get it to work - probably the now the signal is so bad that it never makes a connection.

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open. What do I need to do?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

My apple ID password works for all of my devices but one. i only have one account and have changed the password several times but still cannot get it to work on my iPhone. any suggestions would be appreciated.

Thanks for the suggestion, Chris. I actually did not resolve the issue which is why i did not post an answer.
it turns out that my iphone seems to default to an incorrect User ID (it defaults to an @me account, which is not something that i have ever used).
even when i change the User ID in my settings for the iTunes store, it still appears when i attempt to get updates for my existing apps. however, it does seem to use the correct ID when i attempt to purchase new apps.
If someone actually had an answer to correct this, i would love to update my existing apps.
Thank you.

Cannot get gpo to work on the domain - server 2008 standard r2

Similar Messages

Maybe you are looking for