Cannot get Guest Services to Start on Virtual Domain Controller

I'm running System Center 2012 SP1 Version 3.1.6018.0
Guests all run Server 2008R2 SP1
I'm having a weird issue when trying to install guests services on a domain controller. On all of the virtual machines of the host, when trying to deploy the guest agent, it fails on all machines with the same error:
Error (2940)
VMM is unable to complete the requested file transfer. The connection to the HTTP server XXXXXXX could not be established.
Unknown error (0x80072ee2)
Recommended Action
Ensure that the HTTP service and/or the agent on the machine powstorehv1.gicw.org are installed and running and that a firewall is not blocking HTTP/HTTPS traffic on the configured port.
I have confirmed that there is no firewall blocking the process so in order to bypass this, I decided to just install the guest agent manually. This worked on all of the virtual machines on the host except for the one that is a Domain Controller.
At the point when it tries to start the service it gives me the following error:
Service 'Microsoft System Center Virtual Machine Manager Guest Agent' (ScvmmGuestService) failed to start. Verify that you have sufficient privileges to start system services.
I have tried with and without UAC enabled and I always run the MSI from an elevated command prompt. I've tried with and without MSIEXEC as well. I have Enterprise and Domain Admin privileges as well and have even tried with the domain administrator account.
At this point I'm not sure why I do not have sufficient privileges to start the service on a Domain Controller but I do understand that permissions are different due to its nature.
Any ideas around this either by installing through SCVMM or manually? Thank you in advance for your time!

After a very painful 10g (EE) installation process
i.e fixing all the following:<snip>
Sat Jul 17 11:40:19 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
ORA-07445: exception encountered: core dump [semop+8]
[SIGFPE] [Invalid floating point operation]
[0x41EDB3C] [] []
Sat Jul 17 11:40:21 2004
Errors in file
/Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
ORA-00822: MMAN process terminated with error
Sat Jul 17 11:40:21 2004
PMON: terminating instance due to error 822
Instance terminated by PMON, pid = 4037==============================================> Any idea on what needs to be done to fix this error.
I remember that i had the very same issue with the
Oracle 9i R2 Developers release.
Any help will be greatly appreciated.You mentioned the 9ir2 release. Do you still have any reference to the 9ir2 software in your environment ? With a little luck you have, and in that case it not so hard to find a solution ...
Ronald.
http://homepage.mac.com/ik_zelf/oracle

Similar Messages

Cannot get IMAP4 service to start

Hello,
I have Exchange 2013 version 15.00.1076.009. I have problem to start IMAP 4 service. I can see in log following events:
Failed to start listening (Error: 10048). Binding: 0.0.0.0:143.
The address is already in use. Binding: 0.0.0.0:143.
Failed to open one or more bindings. The service will be stopped.
IMAP 4 backend service is running.

Hi,
As what Ed Crowley and Hinte says, please check whether the port 143 has been used by other applications. For example, a customized Relay connector is configured with PORT 143 and Front End transport role is assigned.
If that is the case, please disable it then start IMAP service to have a try.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Download and install the OS X Yosemite 10.10.3 Combo Update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

I keep getting an error message that says that the hard drive cannot be repaired. Therefore I cannot get the computer to start up.

I keep getting an error message that says that the hard drive cannot be repaired. Therefore I cannot get the computer to start up.

It doesn't sound like you are doing anything incorrectly from what I can see. Have you tried restarting the iPad and then see if you can backup?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help

My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help!

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Cannot get Lightroom trial to start on Windows 8 [was:lightroom]

I cannot get lightroom trial to start. I am using windows 8

I think you're getting the wrong end of the stick.
Nothing to do with Lightroom not supporting your browser.
It's a download issue often resolved by using a different browser.
You could be downloading any software. This case just happens to be Lightroom. But it's not Lightroom's fault. It's the Adobe website.
Anyway, I've got to go. Best of luck.

D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete. When I click to start LR 2015 nothing happens. I cannot get LR or PS started. Previous versions start.

D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete. When I click to start LR 2015 nothing happens. I cannot get LR or PS started. Previous versions start.

As stated in 1.:
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
Obviously, it will not harm your computer provided you follow the instructions. However, if you don't post your results in the thread where you were given those instructions, then the person helping you cannot help you further. As he asks at the end, "please post the test results on Pastebin, then post a link here to the page you created."

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

Can I move a Virtual Domain Controller from one host(Win Server 2008 R2) to another (Win Server 2012 R2) ? Are there any issues?

I also had this error: "Setup cannot continue. Your computer will now restart, and your previous version of Windows will be restored."
trying to do a in-place upgrade of a Domain Controller Windows 2008 R2 to Windows 2012 R2.
The problem was the separated System Reserved Partition. After I removed using this instructions:
http://jacobackerman.blogspot.com/2012/12/how-to-remove-system-reserved-partition.html
The upgrade ran ok, and now have my DC as Windows 2012 R2.
Hope that helps!.

I cannot get my Mini to start up?

Also cannot get the Apple Cinema Display to start up. Yesterday I hooked up the Cinema Display to my MacBook and used the large screen with that. Then today when I hooked up the Mac Mini and Cinema Display by themselves they will not start up.

Didn't have the mini hooked up correctly. The power cord was not in the power port on the rear of the Mini. Then I had to reset the PMU. Now all is fine. It never pays to be in a hurry. But it does pay to search for the correct answer in the Apple Support Communities. Have a great day!

Cannot get admin Server to start from nmStart

I can not get the server to start and am lost on why:
Here is the error in AdminServer.out
<Apr 12, 2010 2:14:09 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server: Error Failed to get value from Standard Input <---- why is this happening.
Enter password to boot WebLogic server:
<Apr 12, 2010 2:14:10 PM PDT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
<Apr 12, 2010 2:14:10 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Apr 12, 2010 2:14:10 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Apr 12, 2010 2:14:10 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea\user_projects\domains\ALC\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Apr 12, 2010 2:14:13 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Apr 12, 2010 2:14:13 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user denied>
<Apr 12, 2010 2:14:13 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
weblogic.security.SecurityInitializationException: Authentication for user denied
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:947)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
I have tried to setup the userConfigFile and UserKeyFile.
Any pointers to know what to look for..

Hi
1. Looking carefully at the following 3 lines in server statup logs, after 2:20:39 PM GST, server waited like for 16 mts like 2:36:43 and invoked the Force Shutdown. Possible reasons I gave below.
####<Feb 14, 2010 2:20:37 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142837729> <BEA-423101> <[console] Initializing the NetUIx container>
####<Feb 14, 2010 2:20:39 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142839433> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [webapp]. Classifications functionality not enabled.>
####<Feb 14, 2010 2:36:43 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <1266143803604> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
2. Since you mentioned this worked fine and nothing else is changed over a year, the possible cause may be like this. Looks like you have some Documentum stuff (or webapp or modules) loaded on this server. I am not much familiar with EMC Documentum stuff, except that we use that as external Content Management repository for Portal Applications. Looking at the full thread dump for thread 0, looks like documentum code is trying to publish something or interact with its documentum server and may be it is not getting the response back. So make sure if any external systems that this WLS interacts are all up and running.
HTH
Ravi Jegga

Cannot get 3G service to work on iPad in UAE

I have purchased a micro-sim card for 3G service in the UAE but cannot get it to work even though I have the correct APN Setting. The local carrier says it's not a problem on their side. The error message is "cannot activate cellular data network" "Service option not supported". Is there a setting that Im missing? Anyone? Anyone?

Have you tried reseating the micro SIMM? Have you reset network connections (Setting>General>Reset)?

Cannot get location services to turn on

I cannot get the "Location Services" to turn back on on my Iphone 5. It's like the button is stuck and will not move. The others work

Hello celina ambler,
You might need to restart your iPhone. If that doesn't do the trick, try resetting it.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
Allen

Cannot get the Service No from the subitem in a PO

Hi all.
What I wanna do is to get the service number within a position in a purchase order. I've tried function MPN10_READ_POSITIONS wich brings me all the data of the sub item except for service number. The function fills and internal table i_POT with PO number (EBELN), PO position (EBELP) and the service package number (PACKNO) among others. I though that by accessing with these three elements in table ESSL, I would be able to get the service number. Got no lucky,u2026u2026so, does anybody know how to get this information from the PO?

I got it. Bye.

W32tm always on "Local CMOS clock" on virtual domain controller - cannot change to NTP server

The domain controller (Server 2012R2) is hosted on Hyper-V (Server 2012R2). It is a PDC.
- firewall disabled
- cleaned up w32tm:
net stop w32time
w32tm /unregister
w32tm /register
net start w32time
- applied ifixit from http://support.microsoft.com/kb/816042 to enable external ntp server de.pool.ntp.org
- disabled
VMICTimeProvider in registry
(HKLM\SYSTEM\CurrentControlSet\Services\W32Time\TimeProviders\VMICTimeProvider\Enabled = 0)
I can manually query the ntp server de.pool.ntp.org:
w32tm /stripchart /computer:de.pool.ntp.org /samples:5 /dataonly
de.pool.ntp.org wird verfolgt [131.188.3.221:123].
5 Proben werden gesammelt.
Es ist 24.04.2014 10:07:36.
10:07:36, +00.0115379s
10:07:38, -00.0025048s
10:07:40, -00.0008595s
10:07:42, -00.0010477s
10:07:44, -00.0014516s
But still, w32tm does NOT query the ntp server:
PS C:\Windows\system32> w32tm /query /source
Local CMOS clock
rosch

Hi rosch,
Based on your description, please check if disable the "Time synchronization" Integration service. Please refer
to the following operation.
In Hyper-V Manager, right click the DC and select “Settings…”.
In the left panel of Settings, navigate to Integration Services and click it.
Then in the right panel, please uncheck Time synchronization.
By the way, please check if can connect to the time server and UDP port was opened for NTP.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

SharePoint 2013 - Word Automation Services - Conversion fails ErrorCode 10 - Domain Controller on same (development) server as SharePoint

I have code attached below, running inside SharePoint (in a page), used to convert .docx document to .pdf using Word Automation Services.
SPFile inputWordFile = ##CODE THAT RETRIEVE THE SPFile ##
using (Stream inputWordStream = inputWordFile.OpenBinaryStream())
using (MemoryStream outputPdfStream = new MemoryStream())
SyncConverter sc = new SyncConverter(wordAutomationServiceName);
sc.UserToken = web.CurrentUser.UserToken;
sc.Settings.UpdateFields = true;
sc.Settings.OutputFormat = SaveFormat.PDF;
ConversionItemInfo info = sc.Convert(inputWordStream, outputPdfStream);
if (info.Succeeded)
What happens is that the conversion fails. errorCode is 10.
What I came to, is that this is related to the Domain Controller being installed on the same machine.
I have examinated and excluded all several other possible issues (memory resources, etc.).
What I had undestood as far, is that the problem is that "the
converter is executed in the context of a very unprivileged local account, and there are no local accounts on DCs"
Is this a KNOWN ISSUE?
Is there a workaround for development enviroment having DC+SQL+VisualStudio+SharePoint on the same machine?

Hi,
It is recommended to try the code demo in this documentation below in a Console Application to see if it can work in your environment:
http://msdn.microsoft.com/en-us/library/office/ff181518(v=office.14).aspx
If it still can’t work, you can restart the Word Automation Services in SharePoint Central Administration in case it is a service issue.
Feel free to reply with the test result if the issue still exists.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Cannot get Guest Services to Start on Virtual Domain Controller

Similar Messages

Maybe you are looking for