Cannot get iMac to communicate with HP6500 on WiFi

Have done setup on HP6500 for wifi, iMac operating off same o2 hotspot, but iMac will not communicate at all with printer.

Hi Sean7393,
If you are having issues setting up your WiFi enabled HP printer with your iMac, you may find the troubleshooting steps outlined in the following articles helpful:
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/HT3500
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Regards,
- Brenden

Similar Messages

Cannot get itunes to communicate with IPOD

When i connect my ipod classic or shuffle i get the following message:-
"The software required for communicating with the IPOd is not installed correctly.Please reinstal iTunes to install iPod's software."
I have uninstalled and re-installed several times, tried selective startup, tried re-installing v7.6. But each case gives me the same message.
Itunes worked before the 7.7 upgrade. I cannot understand why I get the same message on Itunes 7.6 now.
Installed Itunes on my works computer and this recognises my IPOD's OK.

Start with these articles and see if that gets you anywhere...
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date
http://docs.info.apple.com/article.html?artnum=305136
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
iPod missing in "My Computer" or in iTunes for Windows
http://docs.info.apple.com/article.html?artnum=61711
Also you might try forcing the iPod into disk mode first, (note: doesn't apply top shuffle) then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
http://support.apple.com/kb/TS1493
Cheers,
Patrick

Cannot get iMac to connect to AE or TC wireless, can connect by ethernet

I Cannot get iMac to connect to AE or TC wireless, can connect by ethernet. All other devices (iPad, Apple TV, Roku, iPhone, iPad Touch) can connect to wireless network without any issues. OS is 10.6.6, both apple TC and AE are current with their software. Any help would be greatly appreciated.

AE=Airport Extreme? or Express? - you mention TC (Time Capsule) above, but, I don't want to assume.
*Sorry, it is Extreme, and yes TC is Time Capsule*
If Time Capsule, have you tried to a reset? - http://support.apple.com/kb/ht3728
*Yes did full factory reset*
What band are your using - 2.4Ghz or 5Ghz?
*2.4 GHz*
What is your TC connected to - what type of router - cable or dsl?
Cable
Thanks again for your patience in helping to resolve!

HT4437 The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Does anyone know what I could be doing wrong? Thanks!!

The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!

As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

After updating iPod to iOS 5.0, cannot get into Game Center with previous nickname. It says my nickname is already in use by another account. Why did this happen and how can I fix this with my old nickname and its data?

After updating iPod Touch to iOs 5.0, I cannot get into Game Center with previous nickname. The screen says my nickname is already in use by another account. Why did this happen and how can I fix this so I can still use the same nickname?

Did you haveany problem with updating to iOS 5? It soundsl like the update did not correctly restore from the backup that iTunes mnakes as the fisr step of the update.

How to get Lion to communicate with WD

Is there a way to get Lion to communicate with WD Mybook world edititon ( manufacturer's firmware update won't help )

Phone the online Apple Store and order a download code for it.
(70232)

I changed my Apple ID and password last week. Today I cannot get into my computer with the new password..help!

I changed my Apple ID and password last week. Today I cannot get into my computer with the new password..help!

Your Apple id password is not necessarily the same as your log-in password.
The former is what you use to log-in to Apple services and sites. The latter is what you use to login to your computer. That does not change when you change your Apple ID password. Try the original computer login password.

Inserted a png PIP into my clip, can see it fine, can see it playing with the clip as expected when moving the play head manually, but cannot get it to play with the clip for preview, pleas help!

I am sorry if my inquiry here seem dumb but I am a new iMovie user and cannot figure this out. I inserted a png image into my video clip in the project as PIP, I can see it and move it and can also see it playing with the main clip if I move the play head manually, I can also see the PIP part only playing along with the undelying main clip if I use the Play button in the preview window when the PIP section is selected, however, for the life of me I cannot get it to play with the main clip all together for previewing the entire video via the video play button. What happens is that the video plays normally and when the PIP section comes in, the video clip stop all motion during the duration of the PIP section and the PIP image itself is simply NOT showing. Am I missing something really stupid here? It seems as it the Picture On Picture is a separate clip that plays with the underlying main video clip if selected and played by itself but it is not part of the video clip and will not play with it. What am I missing here, can anyone please help?
Shony

The easiest way to get up and running is to convert your MP3s to MP4s (obviously there won't be a video track). The following link links to a file that was an MP3 that I converted to an MP4 using QT Player Pro. When you go to export the files, make sure you click on "Options" and then check the box for "Enable Streaming" in the Streaming tab. It should stream flawlessly using QT Player. rtsp://rhsstreamit.rih.org/testmp4/Scorpion.mp4
Make sure you place the media to be streamed in the proper folder. You should only get a "404" message if the physical file doesn't exist.
Good luck!

HT4623 I cannot get my ipad setup with correct password

I cannot get my ipad4 setup with correct password. No ive tried resetting router password doesnt work...help!

What setup password?
Apple ID?
WiFi connection password?

I cannot get movies I purchased with iTunes to play

I cannot get movies I purchased with iTunes to play back on my Mac Mini. It only happens on brand new movies purchased.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

HT203609 On my 6 plus I cannot get consistent email notifications. I have wifi. Notifications are enabled for the gmail account. Anyone have an idea?

On my 6 plus I cannot get consistent email notifications. I have wifi. Notifications are enabled for the gmail account. Anyone have an idea?

Hi Try this Settings, email account Sign, out then Sign, back, in do this will all Email, Accounts that are not working. Cheers Brian

Cannot get printer to print with my iMac but will print from my dell laptop?

cannot get my printer to print with my imac but will print from my dell laptop?

OK, well you haven't provided any information so there isn't anything we can do. What is needed at the bare minimum is:
Exactly what printer are you referring to?
How is it connected to the iMac (USB, Wi-Fi, etc...)?
What steps you have taken to connect the printer?
What errors you have run into.
What I would recommend is using Apple's Printing Overview OS X Lion to learn how to install it. Also take a look at Printer and scanner software for Snow Leopard & Lion to see if it's even compatible with Lion.

Cannot get printer to work with iMac

I cannot get my Epson printer to work with my iMac , It just keeps saying it cannot find printer.
All the other settings are correct , its just the server that fails. I have downloaded printer files ,
sometimes it does recongise it and works, then it stops, I have tried downloading the program again but it makes no difference.
Need to use printer and scanner for my job, and this is driving me mad!!

It sounds like BT's hardware may have a firewall that's blocking more than it should.
http://support.apple.com/kb/HT3669
is the printer/scanner listing from Apple.
Use this link: http://support.apple.com/kb/dl1398 to get the latest Epson drivers if your printer/scanner is compatible.
If it isn't, here are some alternatives from my macmaps page:
Epson, alternate Australian site may have more up-to-date drivers for Epson, Epson RIP and colormatching drivers from iProof Systems, Guten-Print (formerly known as Gimp-print), and Printfab. http://www.linuxprinting.org/macosx/

How do I get flash to communicate with a database

Hi I would greatly appreciate some help here as I am getting overwhelmed by the variety of products out there. I have written a flash program using AS3 which allows the user to build a picture of a product using a variety of options displayed in checkboxes. Very simply these checkboxes either make a layer visible or invisible in my flash movie and certain choices may change the list of options. This information is currently being supplied by XML. Once the user has built his product, I would like to be able to save his choices in a SQL Server database and also be able to download his options again at a later date and view these choices at the manufacturing plant.
So far I have tried using asp.net to write to the database and have got the information to the asp.net program by using the querystring, however there may be up to 50 options which does make a querystring rather unwieldy. Also I cannot seem to send back information from the asp.net page to my actionscript.Can anyone tell me how to do this or give me an example? I am supposing that I use the response.write function in asp.net but what command in AS3?
I looked into the possibility of using a webservice but see that AS3 no longer supports this as all the functionality is in Flex. I have read about Flex but still do not understand whether it could help me and how it can communicate with my flash program and pass the options in and out of it.
I also briefly looked at Flash remoting which did appear as though it was the answer but is even more expensive to buy than flash itself.
Can anyone give me suggestions on how to move forward with my problem

I haven't worked with ASP, so what I'm offering is based on using PHP. For sending data to a database using AS3, you should be able to use the URLVariables class to pass the data to an ASP file. The ASP file will maage getting the data into the database. To get data out of the database, the most common method would be to treat the ASP file as a xml source, having it write xml formatted data to the Flash file.
You might want to Google "AS3 ASP SQL tutorial" and see if you get any results. Otherwise, here's a link to a tutorial for a PHP/MySQL version that might at least give you an idea of the processing scenario...
Flash - PHP - MySQL
http://www.gotoandlearn.com/play?id=20

Cannot get iMac to communicate with HP6500 on WiFi

Similar Messages

Maybe you are looking for