Cannot get internet access in Windows 10

Symptoms
You are connected to an access point or with the ethernet cable and cannot get an IP address.
No internet access
DiagnosisSolution

All,
There can be multiple reasons - drivers not up to date (please use the latest from our website) or in some cases could be related to VPNs and some anti-virus applications. Please see https://forums.lenovo.com/t5/Windows-10/Windows-10-no-network-connections-or-wifi/m-p/2130264#M861

Similar Messages

TS1398 Connected to Wi Fi but cannot get Internet access

Connected to Wi Fi but cannot get Internet access Have just done OTA update Dec 1 1012, could this be the problem?

Does the iPod connect to other networks?
Do other devices now connect?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My mac book air connects to my network and gets internet access but time machine cannot find my airport base station to set up time machine

My mac book air connects to my network and gets internet access but airport utility cannot find my airport base station to set up time machine

airport utility cannot find my airport base station to set up time machine
Normally, AirPort Utility is not used or needed to set up Time Machine backups......unless a default setting on the Time Capsule to Enable File Sharing has been changed.
On the other hand, if you open AirPort Utility, a picture of the Time Capsule should be displayed. Are you saying here that the Time Capsule does not appear when you open AirPort Utility?

TS1398 my wifi is showing connected but i am not getting internet access. When in the settings wifi settings you can see the wheel or timer spinning but never a check mark like my other iPad.

my wifi is showing connected but i am not getting internet access.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Build PAS Model - Cannot get exclusive access to model

Hi all!
I am receiving "Cannot get exclusive access to model" when we generate Build PAS Model from CubeBuilder.
This is the environment info:
OS: Red Hat Enterprise Linux Version 5.4
Product: SSM 7.5 SP09 HotFix 03 (working in SAP Netweaver CE 7.1 SP5 for MaxDB)
DB: MaxDB 7.6
I create CBDEFAULT model connection, ODBC DSN SSM_CB_EA and SSM_CB_EA LINKDID, as per instructions in the install and config guides.
All except the cube builder is working fine, even though after receiving the error y verified in my SSM Administrator that the Model Connections were
correctly defined, my cube was named "CLARO" so the connection was automatically created as CBCLARO_MM and CBCLARO_SC, we tested connection and all was ok.
I suspect about the ODBC for linux, for that instance, I install unixODBC and configure, but the problem persist. In my test, we verified that the user root
and smpadm (smp is my instance name) the ODBC connection works fine, however, I configure the SYSTEM DSN however I was unable to verify it.
These are my config files:
***Application Server files
Application Server installed at /app/sap/sm/lss
The lsdal.ini was copied from a Windows machine after configure the connection.
/app/sap/sm/lss/lsdal.ini:
[enable]
ConnectionID1=Oracle (OCI)
ConnectionID2=DB2 (CLI)
ConnectionID3=SAP NW BI RFC (using sapnwrfc.ini)
COnnectionID4=SAP NW BI RFC (load balancing)
ConnectionID5=SAP NW BI RFC (specific server)
[ConnectionID]
ConnectionID1=ssm_cb_ea
[Settings]
LastSource=SSM_CB_EA
[ssm_cb_ea]
A0=ODBC
A1=172.24.4.123
B1=SERVERDB
B2=0SERVERDB=smp
B3=DSN
B4=0DSN=SSM_CB_EA
B5=UID
B6=0Userid:=SAPSMPDB
B7=PWD
B8=3Password:=LNBY<W?D@420
E1=MaxDB (Unicode)
E2=MaxDB
T1=ODBC
V1=9.6.0
*** unixODBC Config files
odbcinst -j output
unixODBC 2.3.0
DRIVERS............: /usr/local/etc/odbcinst.ini
SYSTEM DATA SOURCES: /usr/local/etc/odbc.ini
FILE DATA SOURCES..: /usr/local/etc/ODBCDataSources
USER DATA SOURCES..: /root/.odbc.ini
SQLULEN Size.......: 8
SQLLEN Size........: 8
SQLSETPOSIROW Size.: 8
System DSN files
/usr/local/etc/odbc.ini
[SSM_CB_EA]
ServerDB=SMP
ServerNode=172.24.4.123
Driver=/sapdb/programs/lib/libsqlod.so
[Default]
Driver=/sapdb/programs/lib/libsqlod.so
/usr/local/etc/odbcinst.ini
unixODBC 2.3.0
DRIVERS............: /usr/local/etc/odbcinst.ini
SYSTEM DATA SOURCES: /usr/local/etc/odbc.ini
FILE DATA SOURCES..: /usr/local/etc/ODBCDataSources
USER DATA SOURCES..: /root/.odbc.ini
SQLULEN Size.......: 8
SQLLEN Size........: 8
SQLSETPOSIROW Size.: 8
User DSN File (root)
/root/.odbc.ini
[SSM_CB_EA]
ServerDB=SMP
ServerNode=172.24.4.123
Driver=/sapdb/programs/lib/libsqlod.so
[Default]
Driver=/sapdb/programs/lib/libsqlod.so
User DSN file (smpadm)
/home/smpadm/.odbc.ini
[SSM_CB_EA]
ServerDB=SMP
ServerNode=172.24.4.123
Driver=/sapdb/programs/lib/libsqlod.so
[Default]
Driver=/sapdb/programs/lib/libsqlod.so
*** Test Connection result from root
root
Connected!
sql-statement
help [tablename]
quit
SQL>
*** Test connection result from smpadm
smpadm
Connected!
sql-statement
help [tablename]
quit
SQL>
*** /app/sap/sm/lss/workfile/cb_build_CLARO.trc
LSS>
LSS> set control LINKID SSM_CB_EA
LSS>
LSS> .... capture cube id in a control var to simplify queries on other tables
LSS> access lslink
LSLink>

Hi Cliff,
This is the output of sup sho data and sup sho log before pressing "Build PAS Model" (My cube is the named "CLARO")...
System> sup sho log
ADMIN: Logged In , System Process Id 20856
         Database APLIB Open READ
         Database CLARO Open READ
         Database SMREPORT Open SHARED
CBADMIN(1): Logged In , System Process Id 21020
         Database APLIB Open READ
         Database CGLIB Open SHARED
         Database INITIAL Open READ
         Database SMREPORT Open SHARED
System> sup sho data
MASTERDB (/app/sap/sm/lss/MASTERDB) Maxblocks 8000 Number Free 7898
Database: APLIB (/app/sap/sm/lss/APLIB)
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Read
   Current State: IN USE (READ) Protection Key: None
   Last user: CBADMIN    Last access: Mon Aug 29 22:51:39 2011
   Blksize: 512   Observations 5000   Maximum Members: 10000
   Max. Size of the Database is 32 Gigabytes.
   Maxblocks: 10000 Number Free: 4651
Database: CGLIB
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Shared
   Current State: IN USE (SHARED) Protection Key: None
   Last user: CBADMIN    Last access: Mon Aug 29 22:51:39 2011
   Blksize: 2048   Observations 5000   Maximum Members: 10000
   Database Not Available, Cannot Display Maxblocks and Number Free
Database: CLARO (/app/sap/sm/lss/workfile/CLARO)
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Read
   Current State: IN USE (READ) Protection Key: None
   Last user: CBADMIN    Last access: Mon Aug 29 22:51:41 2011
   Blksize: 16384   Observations 3000   Maximum Members: 20000   Maximum Variables: 5000
   Max. Size of the Database is 32 Gigabytes.
   Maxblocks: 120000 Number Free: 119986
Database: INITIAL (/app/sap/sm/lss/INITIAL)
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Read
   Current State: IN USE (READ) Protection Key: None
   Last user: CBADMIN    Last access: Mon Aug 29 22:51:41 2011
   Blksize: 4096   Observations 5000   Maximum Members: 10000
   Max. Size of the Database is 32 Gigabytes.
   Maxblocks: 10000 Number Free: 9965
Database: JUICE (/app/sap/sm/lss/JUICE.ENG)
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Read
   Current State: AVAILABLE Protection Key: None
   Last user: GUEST    Last access: Mon Aug 29 21:58:59 2011
   Blksize: 8192   Observations 1000   Maximum Members: 10000
   Max. Size of the Database is 32 Gigabytes.
   Maxblocks: 5000 Number Free: 4472
Database: SMREPORT (/app/sap/sm/lss/SMREPORT)
   Maxaccess: UPDATE   Disposition: ENABLED   Default Usage: Shared
   Current State: IN USE (SHARED) Protection Key: None
   Last user: CBADMIN    Last access: Mon Aug 29 22:51:39 2011
   Blksize: 2048   Observations 5000   Maximum Members: 10000
   Max. Size of the Database is 32 Gigabytes.
   Maxblocks: 10000 Number Free: 9962
Database: TBDB (/app/sap/sm/lss/TBDB.ENG)
   Maxaccess: READ   Disposition: ENABLED   Default Usage: Exclusive
   Current State: IN USE (READ) Protection Key: None
   Last user:     Last access:
   Blksize: 16384   Observations 0
   Max. Size of the Database is 512 Gigabytes.
   Maxblocks: 8000 Number Free: 7666
As I can see there is not a lock or session opened with my cube, could you please confirm me.
Thanks and Best Regards,
Douglas

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

Why can I not get internet access today?

I was not able to get internet access at home this morning and now I can't get it at the office. G-mail says the mail server is not responding. Also, none of my apps are loading. Verizon, please fix this!

Criggs, we have work to do! We can't have you without service and access to your g-mail account. Do you have wireless or landline service? Which wireless phone do you have?

My guests does not get internet access through my guest network

I have created a guest network on my time machine. The problem is that my guests don´t get internet access when they choose the network and type the password. I don´t understand why this is happening? My ordinary network is fully functional.

If you are using 7.6.3 firmware on the TC, the guest network does not actually work in bridge mode.. it looks like it does.. but nope, it doesn't.
Make sure the TC is the main router in the network.

Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

Hi, i have lost my iPhone's iCloud password and i cannot get an access to it now because i have activated " Find my Phone " , and i couldn't remember neither the emil or password, please help me if there is anyway to bypass this process please!!

Start here: https://iforgot.apple.com/password/verify/appleid

When using Get Others to Sign i get an access denied window associated with my Adobe ID

Can someone please help i get an access denied window when trying to send out a form to have signatures added. It seems to be associated to Adobe ID, can someone please point in a direction to fix this.

Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID.

I HAVE AN IPAD 2 WITH WIFI ONLY, CAN I GET INTERNET ACCESS FROM ANY SMARTPHONE, OR DO I NEED A SPECIFIC PHONE FOR THIS?

i ave an ipad 2 with wifi only, can i get internet access from any cell phone, or do i need a specific phone or type of phone

I received an iPad 2 for Christmas (the 1st Apple item I've ever owned!) and own a Nokia N95 8GB mobile (that's pretty much on its last legs/ready to die any day).
On the Nokia I've got 2 apps (downloaded from/via Nokia's 'Ovi' app store): JoikuSpot & HandyWi. Both are the free versions.
I've not used HandyWi much - if at all - but JoikuSpot has been great. Basically, it creates a wifi hotspot (as pjl123 mentioned) in a couple of straightforward steps, and allows a few devices to be connected. It displays who/what is connected at a given time - so you can check if the guy having coffee behind you is piggybacking your hotspot or not! - data packets sent received etc.
The paid version has the benefit of allowing you to secure the hotspot and other security features. Their website is www.joiku.com, FYI.
Given how slow behind the 8 ball Nokia has been, their phones are getting cheaper and cheaper - given Joiku's meant to work with Nokia S60, Symbian ^3, Maemo, Meego & Sony Ericsson S60, this might be a cost effective option.
Ps. Ah! One more thing - Joiku's website specifies that 3G must be used; that WAP will not work. Good luck, enjoy!

Can't get internet access unless I am at home...

I can't get internet access, use my navigation or get messages unless I am at home. I have tried everything, and don't know what else to do. Please HELP any suggestions would be appreciated! Thank you!

Hi nthompson77,
Welcome to BlackBerry Support Community Forums.
Do you have a data plan with your wireless provider that supports internet browsing and messaging?
If you do, is your signal uppercase or lowercase when you're having this issue? Have you tried reinserting your battery?
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

I installed my new iMac with my Macbook Pro 2008 backup and created a network with the iMac and now the Macbook Pro cannot get internet.

I installed my new iMac with my Macbook Pro 2008 back up. I created a iMac network with Airport extreme, but now my Macbook Pro cannot get internet. any ideas on why or what to do about it.

Hello 1BillyMac,
It seems you have a network conflict that isn't allowing your MacBook Pro to connect to the internet. This may be caused by both computers sharing identical network settings. You may want to consider creating a new network location on your MacBook Pro to assign new network settings. The following article will instruct you on how to do that:
OS X Yosemite: Add a network location
A network location is a group of network settings
A network location is a group of network settings for your various network services (Ethernet or Wi-Fi for example).
If you often change network settings, you may find switching between locations quicker and easier than repeatedly modifying individual groups of settings.
For example, you might want to make a location for “home,” where you connect to the Internet with a telephone modem, and a location for “office,” where you connect to your company network and the Internet using Ethernet or AirPort.
Choose Apple menu > System Preferences, then click Network.
Click the Location pop-up menu, choose Edit Locations, then click Add .
Enter a name for the location, then click Done.
Enter settings for each network connection service you want to use in that location.
After you create your locations, you can switch all of your network settings by clicking the Location pop-up menu and choosing a different location.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

HT4199 why can't I get internet access on my ipad mini when attached to itialian router whilst on holiday

I live in France but I am in Sicily on holiday for a month's holiday. My ipad is showing that I am connected to a router in Sicily but I still can't get internet access and on facebook it is marked 'network error'

Hello there, sheilafromfra.
The following Knowledge Base offers up some great steps for troubleshooting the Wi-Fi issue on your iPad:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Cannot get internet except at home my wife has a kindle and she can connect anywhere what am i doing wrong, cannot get internet except at home my wife has a kindle and she can connect anywhere what am i doing wrong

cannot get internet except at home my wife has a kindle and she can connect anywhere

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Reset network settings:Settings>General>Reset>Reset Network Settings

Cannot get internet access in Windows 10

Similar Messages

Maybe you are looking for