Cannot get Ipod Touch 8 GB to update to newer software
I have a 8 GB Ipod touch. The software version is currently 2.2.1. All of my apps will no longer sync to my Ipod because it says they require the Iphone 3.0 software update. I have tried to update my software several times, but it says I have the current version. What can I do?
Hello salchichaz,
It sounds like you have a 1G iPod Touch. If that is the case, see this Apple support document for information on how to upgrade to 3.1.
http://support.apple.com/kb/HT2052
B-rock
Similar Messages
-
Cannot get ipod touch to sync with my computer windows xp
cannot get my ipod touch to sync with my computer windows xp
If you mean that your iPod does not appear under Devices in iTunes see the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Otherwise please provide additional information like what happens when you try to sync. Error messages? -
Cannot get iPod touch going with Vista Ultimate
iTunes gives me a message that the iPhone only works with 32 bit versions of XP or Vista. I have Vista Ultimate on my laptop, which is 32 bit.
Does anyone have any suggestions. I cannot get this thing going....Well what does the system panel say under the control panel? Should tell you on label "System Type"
64-Bit is not supported. Not sure why since iTunes knows the iPod is there. iTunes thinks its a iPhone instead though. -
Cannot get ipod touch to sync with wifi network at home
hi , , no matter how i enter the password on my ipod touch it will not connect to my wanadoo wireless router ? any ideas ? it just comes up cannot connect
i have it set up on wep key securityDo other devices succesfully connect to the network?
Does the iPod successfully connect to other networks?
Try:
- Resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Powering your router off and then back on
- Resetting network settings: Settings>General>Reset>Reset Network Setting
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Cannot get iPod touch to sync over wifi with my Windows 7 PC with iTunes 10.5
I have checked the box under summery in the options to sync my iPod Touch over wifi. It still doesn't work.. PLEASE HELP!
If you mean that your iPod does not appear under Devices in iTunes see the following:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Otherwise please provide additional information like what happens when you try to sync. Error messages? -
I have a Mac PC, OS X, 10.5.8 Version but cannot download ICloud and I was led to believe this version supports it. I have downloaded all available software. Does anyone have suggestions? Just realized I need later version - - 10.7.5 or later. How do I go about upgrading this operatin system?
10.7 is no longer avaiable for immediate download. You need to purchase a download code, which will be delived by email in 1 to 3 business days. Using that code, you can download the software from the Mac App Store, and it will stay available for re-download from that Apple-ID.
http://store.apple.com/us/product/D6106Z/A/os-x-lion
To get the Mac App Store, you need to purchase a Snow Leopard 10.6 Installer/Utilities DVD. This physical DVD will be shipped to you by conventional means. The software can be Installed and re-installed from the DVD.
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard -
Youtube videos will not play on Ipod touch 5 after ios update
YouTube videos will not play on my IPod touch 5 after I updated the operating software. Any suggestions on how to fix? I uninstalled and reinstalled the YouTube app.
What exactly happens when you try?
Apps crashing
See:
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
Contact the developer(Google)/go to their support site
Restore from backup. See:
iOS: How to back up -
Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I just installed the latest version of iTunes to get the updates and new software on my iPod but it hasn't updated my iPod or put any of the new software on there either. How to I get the software to sync onto my iPod?
Are you sure it's not 6.1.6? If it is, that is the latest iOS version that will work on a 4th generation iPod Touch. Later versions require a 5G iPod which has twice as much RAM.
-
HT4623 i think i got the 1st or 2nd gen ipod touch how do you update it??
i think i got the 1st or 2nd gen ipod touch how do i update it?
To update
Connect the iPod to your computer and update via iTunes
iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad
A 1G iPod can go to iOS 3.1.3
A 2G to 4.2.1. Requires iTunes version 10.X. That requires a Mac with OSX 10.5.8 or later. With 1OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
Identifying iPod models -
IPod Touch 3 won't update apps
iPod Touch 3 won't update apps. When I respond to the notice of an available update, the icon dims and a "waiting" message appears under it. It will hang like that until I delete it and reinstall the new app. I had another problem that has been resolved when I tried to get more episodes of a podcast, I ended up with 11 of them in the queue that wouldn't ever finish. They too would just hang there. I had to delete them all and get them through iTunes. I don't know how to upgrade the apps from iTunes though. Why is this happening just since I upgraded to ios 5.0.1?
yoipodproblem wrote:
If We Update 2nd Gen Ipod Touch From 3.1.3 To Higher Level WilL It Slow my iPod :/
I suppose that's debatable.
My iPod does ocassionaly take a few seconds to carry out a command, but since it is such a powerful device, capable of so much, I'm prepared to wait two extra seconds.
(I have 2nd generation iPod Touch with iOS 4.2.1 on it.)
By the way, since your question has no connection to the one asked by the original poster, it would have been far wiser for you to create your own thread. That way, you are actually more likely to get responsess to your question. -
When I got the prompt to update my iPod Touch 4th generation, the update claimed to have over 200 new features including Siri. Is there going to be another update that would make this a true statement?
No Siri on 4G Footnote 2 of
Apple - iOS 6 - iPhone, iPad, and iPod touch get 200+ new features.
says:
Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. -
HT4972 my ipod touch wont let me update IOS and becuase of that i cant download any apps
my ipod touch wont let me update IOS and becuase of that i cant download anything of the app world is there anyway of helping me
Do you have a 2G iPod. Those can only go to iOS 4.2.1.
A 1G can only go to 3.1.3
A 3G only to 5.1.1
Identifying iPod models
What version of iTunes is on the computer? The latest is 11
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318. -
I'm looking for a way to check and see if a specific iPhone user is receiving my imessages or if there phone is not working properly. I cannot get in touch with an out of state friend for several days and the only number I have is to their cell (iphone). Thank you.
YYou can only get a read receipt, not if they only received it.
http://m.imore.com/how-turn-and-read-receipts-imessage -
My Ipod touch was in an update and froze. It shows a blank screen and sometimes shows an apple. Now it will not restore. What do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Maybe you are looking for
-
Nokia E65 Software (support pages)
Hello, I've seen some new applications available for E65 at product pages/support ( http://europe.nokia.com/A4361156 ), Corporate Phonebook and Psiloc Wireless Presenter. As they are provided in the support page, I thought they were complete/free app
-
I began having problems with my iphone 5 after I updated to ios7. It began having several issues e.g. freezing, turning on and off by itself and the home button was not responding. It is a long story because I had to talk to apple reps etc. to make a
-
ADF Security Authorization question
For whatever reason, it seems to be not working for me. Well, I will try to test it a non_SRDemo environment. By the way, what is the connects what is set in dialog permisssions and the updateable value? Isn't there something in the code that I can c
-
Hello, I'm using attribute cl_gui_alv_grid=>mc_style_button to put some cells in my ALV as buttons. I need that when the user push those buttons an event is raised. Does someone have any example of buttons in ALV cells? Thank you and regards.
-
Bidirectional binding between DoubleProperty and ObjectProperty Double
Is there a way to bind a DoubleProperty and an ObjectProperty<Double> in a bidirectional manner? For a unidirectional solution, one could utilize low-level binding api, but I couldn't find a way to achieve the same for bidirectional binding.