Cannot Get More Than 3 Wireless Connections

Howdy, I have a Linksys WRT54G v8. I can't get more than three wireless connections established to the router at a time. Is this a known limitation of the Linksys hardware or am I experiencing a novel problem. I've changed frequencies and switched from mixed mode to G only in order to resolve the problem but these have not made a difference. Allowed number of DCHP users is set to 50. Any suggestions?

In theory, your router can support up to 32 wireless users. However, since the 54 Mbps bandwidth is shared, the practical limit is much lower, but should be more than 3.
How many "4th" computers have you tried to connect? What exactly happened when you tried to make the connection? Did you turn off the wireless computer's software firewall before you tried to connect? Is the wireless computer setup to "Obtain an IP address automatically" and "Obtain DNS server address automatically" ? What wireless adapter(s) are in the computers? Please give all details of computers that failed to be "number 4".

Similar Messages

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. Is the phone dying?

I cannot get more than 12 to 14 hours out of a full charge, and with a new battery. The battery has been charged at least a dozen times, so I know it's at full charge. Is the phone dying?

Do a Li-ion battery rebuild. Do a full 6-8 hour charge with device in sleep mode, next run it down to about 45-50 % and then a 4-5 hour charge. After that use your phone and take it down to 30%. Another 6-8 hour charge and then down to no lower then 20-25% and one more full 8 hour charge. At that point your battery should be rebuilt back to a normal life cycle. This should eliminate your battery problem.

Cannot get more than 8 item in list component

Hi,
I can't get more than 8 items in list component using getItemAt(), it returns null. I will search more for this but no result.
Please Help me here to move to next step.
Thanks
Sureshkumar G

If you're asking if you can overall, yes you can:
http://help.adobe.com/en_US/as3/components/WS5b3ccc516d4fbf351e63e3d118a9c65b32-7f41.html
If you're asking if you can do this in the same context, off-screen, no you still get the same error as the .enabled property.
I hate to throw a hunch but I feel as though Adobe is employing something I'm used to in native iOS programming (Apple Devices). In lists they have something called "dequeue". It's the reason an extremely long list scrolls smoothly. What it does is render ONLY the rows that are in view. When a row is about to scroll off view it deallocates it from memory and then recreates the next row. They do this so you only ever have the current amount of viewable rows in memory and it speeds up scrolling. Although, I can make property changes to items in an iOS list that's off-screen so they don't have this issue ;(. Just food for thought.
I'd submit it to the bugbase and see what Adobe states. They may say they intend you to get the item in view, alter it and then go back to your previous position. That would be silly but at most I can tell you I definitely get errors trying to access an element outside my view. They're probably not used to items needing visual toggles when you can't even see them.
edit:
On a further note I tried the scrollToIndex() method, tried to disable, that much worked fine. The second I then scrolled back to the previously selected index the list screwed up.
I even daisy chained functions a second apart (30 frames worth of wait). I scrolled down and that worked so I waited 1 second. I disabled the visible item I wanted to and that worked so I waited another second. I scrollToIndex(0) to get back to the top of the list, the list blew up. Random items (several items) were disabled and the one that I explicitly disabled was enabled.

Cannot get more than 54Mbps N speed in Windows

I have a 1st-gen Airport Extreme (dual-band) Base Station, firmware 7.4.2, and a MacBook Pro, "Mid/Late 2007," 2.4GHz. I have separate 2.4GHz and 5GHz network names on the AEBS. I have a great 300Mbps connection when I am in OS X 10.6, but when I switch over to Windows 7 on the MBP, I have never been able to connect at more than 54Mbps. I have connected to my friend's 2nd-gen AEBS in Windows at 300Mbps, so I know it's not my MBP. Is there any way to fix this connection speed in Windows? Thanks for any suggestions.

I do have the Radio Channel Selection set to Automatic. Would it make a difference to specify the 5GHz channel?

Cannot move more than 2 mailboxes from exchange 2007 to Exchange 2013

I have been trying to move mailboxes from ex2007 to ex2013with the new-migrationbatch and the new-moverequest command.
I have a DAG-cluster with two servers with all roles.
What happens is that I cannot get more than two concurrent mailbox moves. If I restart the MRS-service nothing happens. I have changed the config-file for the mailbox replication service and currently have these settings:
MaxMoveHistoryLength="5"
MaxActiveMovesPerSourceMDB="20"
MaxActiveMovesPerTargetMDB="20"
MaxActiveMovesPerSourceServer="100"
MaxActiveMovesPerTargetServer="100"
MaxTotalRequestsPerMRS="100"
What is funny is that when I start a new batch with autocomplete off, only two mailboxes goes to 95% and the rest of them is not even started.
The command I use is New-Migrationbatch -local -Name TestNew -csvdata ([System.IO.File]::ReadAllBytes("c:\temp\exchange\migration\testmigration.txt")) -targetdatabases mdb001,mdb002 -autostart
Here is the output of Get-MigrationConfig | fl
RunspaceId : d382f8a7-924a-4f0e-812e-f18970b632e2
Identity :
MaxNumberOfBatches : 100
MaxConcurrentMigrations : Unlimited
Features : MultiBatch
CanSubmitNewBatch : True
SupportsCutover : False
I have off course restarted both servers and services.

Just out of curiosity, on which server you made these changes? Mailbox or CAS? And on Target or Source Server?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Pop to get more than one value of same type

Hi
I want to give pop up that can take 3 customer numbers
and export it.Problem with <b>popup_get_values</b> function module is that you cannot get more than one value of same type for example here <i>kna1-kunnr</i>.
Is there any function module to solve this problem.
Regards
Amol Deshmukh

Hi,
may be you can use knvv-kunnr for the second value ....
That should also do the job.
regards
Siggi

Can't get pan to use more than 4 connections/server

My ISP has a news service that I users can access with a max of 20 connections per user.
I've been trying to use pan to download some file from this server, but I can't get it to use more than 4 connections.
On the pan web site it says to go to the NNTP menu,but I just can't find it.
What's up? Am I blind?

Have you overriden the doPost() method in ViewFormData? If not I think that you get this error message as a default
doGet() and doPost() should do the same thing so have one call the other

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks

Dear All,
I get the Following Error in the Essbase console when I try to Execute any CalcScript.
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
Please find the detailed output of the Statics of my Planning Applications Database and outline.
please help guys........
GetDbStats:
-------Statistics of AWRGPLAN:Plan1 -------
Dimension Name Type Declared Size Actual Size
===================================================================
HSP_Rates SPARSE 11 11
Account DENSE 602 420
Period DENSE 19 19
Year SPARSE 31 31
Scenario SPARSE 6 6
Version SPARSE 4 4
Currency SPARSE 10 10
Entity SPARSE 28 18
Departments SPARSE 165 119
ICP SPARSE 80 74
LoB SPARSE 396 344
Locations SPARSE 57 35
View SPARSE 5 5
Number of dimensions : 13
Declared Block Size : 11438
Actual Block Size : 7980
Declared Maximum Blocks : 3.41379650304E+015
Actual Maximum Blocks : 1.87262635317E+015
Number of Non Missing Leaf Blocks : 10664
Number of Non Missing Non Leaf Blocks : 2326
Number of Total Blocks : 12990
Index Type : B+ TREE
Average Block Density : 0.01503759
Average Sparse Density : 6.936782E-010
Block Compression Ratio : 0.001449493
Average Clustering Ratio : 0.3333527
Average Fragmentation Quotient : 19.3336
Free Space Recovery is Needed : No
Estimated Bytes of Recoverable Free Space : 0
GetDbInfo:
----- Database Information -----
Name : Plan1
Application Name : AWRGPLAN
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:00:05:00
Users Connected : 2
Blocks Locked : 0
Dimensions : 13
Data Status : Data has been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 3128160
Current Data Cache Size : 3128160
Index Cache Size Setting : 1048576
Current Index Cache Size : 1048576
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 10
Retrieval Sort Buffer Size (in K) : 10
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 0
Currency Info
Currency Country Dimension Member : Entity
Currency Time Dimension Member : Period
Currency Category Dimension Member : Account
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin@Native Directory
Start Time : Mon Aug 15 18:35:51 2011
End Time : Mon Aug 15 18:35:51 2011
Request Type : Customized Calculation
User Name : 6236@Native Directory
Start Time : Tue Aug 16 09:44:10 2011
End Time : Tue Aug 16 09:44:12 2011
Request Type : Outline Update
User Name : admin@Native Directory
Start Time : Tue Aug 16 10:50:02 2011
End Time : Tue Aug 16 10:50:02 2011
ListFiles:
File Type
Valid Choices: 1) Index 2) Data 3) Index|Data
>>Currently>> 3) Index|Data
Application Name: AWRGPLAN
Database Name: Plan1
----- Index File Information -----
Index File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
File Type: INDEX
File Number: 1 of 1
File Size: 8,024 KB (8,216,576 bytes)
File Opened: Y
Index File Size Total: 8,024 KB (8,216,576 bytes)
----- Data File Information -----
Data File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
File Type: DATA
File Number: 1 of 1
File Size: 1,397 KB (1,430,086 bytes)
File Opened: Y
Data File Size Total: 1,397 KB (1,430,086 bytes)
File Size Grand Total: 9,421 KB (9,646,662 bytes)
GetAppInfo:
-------Application Info-------
Name : AWRGPLAN
Server Name : GITSHYPT01:1423
App type : Non-unicode mode
Application Locale : English_UnitedStates.Latin1@Binary
Status : Loaded
Elapsed App Time : 00:00:05:24
Users Connected : 2
Data Storage Type : Multidimensional Data Storage
Number of DBs : 3
List of Databases
Database (0) : Plan1
Database (1) : Plan2
Database (2) : Plan3

ESM Block Issue
Cheers..!!

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

Cisco AP 1252AG Cannot setup More than 54Mb/s speed in radio 0 (2.4G)

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:SimSun;
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I have a problem when I configure CISCO AP 1252, it cannot support more than 54Mb/s speed but support 802.n which speed can up to 300Mb/s. See below :
here is dot11radio 0 speed option: (The MAX speed is 54Mb/s by manually, how can i setup more than 54Mb/s, because of this AP support 802.n. So the speed should be more than 54M/s, like 300M)
AP#sho inter dot11Radio 0
Dot11Radio0 is up, line protocol is up
   Hardware is 802.11N 2.4Ghz Radio, address is *************
   MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
AP(config)#inter dot11Radio 0
AP(config-if)#speed ?
   1.0         Allow 1.0 Mb/s rate
   11.0        Allow 11.0 Mb/s rate
   12.0        Allow 12.0 Mb/s rate
   18.0        Allow 18.0 Mb/s rate
   2.0         Allow 2.0 Mb/s rate
   24.0        Allow 24.0 Mb/s rate
   36.0        Allow 36.0 Mb/s rate
   48.0        Allow 48.0 Mb/s rate
   5.5         Allow 5.5 Mb/s rate
   54.0        Allow 54.0 Mb/s rate
***(why here without more than 54M/s rate, CISCO AP 1252 support IEEE802/n)
   6.0         Allow 6.0 Mb/s rate
   9.0         Allow 9.0 Mb/s rate
   basic-1.0   Require 1.0 Mb/s rate
   basic-11.0 Require 11.0 Mb/s rate
   basic-12.0 Require 12.0 Mb/s rate
   basic-18.0 Require 18.0 Mb/s rate
   basic-2.0   Require 2.0 Mb/s rate
   basic-24.0 Require 24.0 Mb/s rate
   basic-36.0 Require 36.0 Mb/s rate
   basic-48.0 Require 48.0 Mb/s rate
   basic-5.5   Require 5.5 Mb/s rate
   basic-54.0 Require 54.0 Mb/s rate
***(why here without over than 54Mb/s Rate?, it support IEEE802.n)
   basic-6.0   Require 6.0 Mb/s rate
   basic-9.0   Require 9.0 Mb/s rate
   default     Set default rates
   m0-7        Allow MCS rate indices 0-7
   m0.         Allow MCS rate index 0
   m1.         Allow MCS rate index 1
   m10.        Allow MCS rate index 10
   m11.        Allow MCS rate index 11
   m12.        Allow MCS rate index 12
   m13.        Allow MCS rate index 13
   m14.        Allow MCS rate index 14
   m15.        Allow MCS rate index 15
   m2.         Allow MCS rate index 2
   m3.         Allow MCS rate index 3
   m4.         Allow MCS rate index 4
   m5.         Allow MCS rate index 5
   m6.         Allow MCS rate index 6
   m7.         Allow MCS rate index 7
   m8-15       Allow MCS rate indices 8-15
   m8.         Allow MCS rate index 8
   m9.         Allow MCS rate index 9
   ofdm        How to place OFDM rates in rates elements
   only-ofdm   Set rates for best OFDM throughput (no ERP protection will be used)
   range       Set rates for best range
   throughput Set rates for best throughput (includes non-OFDM rates and may cause ERP
Why this device cannot support 300Mb/s rate in radio 0 of speed ?
i want to setup more than 54 Mb/s when i use my laptop to connect this AP.

The 802.11n HT rates apply only to no encryption or WPA2/AES encryption. They do not apply to WEP or WPA encryption. If WEP or TKIP encryption is used, the 1250 series access points and any 802.11n Draft 2.0 clients will not transmit at the HT rates. Legacy rates (802.11a/b/g) will be used for any clients using WEP or TKIP encryption.
Ref.: Release Notes
40MHz Operation
If the throughput you get from a 20-MHz channel isn't enough for your speedy users, you can flip each 5-GHz 11n radio into a bonded-channel configuration.
You can configure 40-MHz operation on the 2.4-GHz radio of the 1250 Series AP, but this isn't recommended or supported. The primary reason against it is that with a wide channel in a band that has so little available spectrum (and so much interference), you make a single AP capable of higher throughput at the expense of performance for all neighboring access points-certainly not the way enterprise WLANs ought to be designed. Also, the vast majority of client chipsets (Intel's, for one) will not support 40-MHz operation in the 2.4-GHz space.
Ref.: Cisco 802.11n Design and Deployment Guidelines
Making the Most of Things
Once you're connected at 802.11n HT rates, you'll want to make sure you don't lose the throughput gains you should be able to achieve. Not all may be within your control, but if you understand the performance implications of these variables, it will help you in baselining your WLAN capabilities.
When your laptops are unplugged, the 11n client will likely try aggressively to save battery power. Depending on client radio and chipset, it's not uncommon to see performance drop by as much as 50 percent. Unless you know how to fully disable this, keep your laptops plugged in if you want maximum performance,
Note: Even if you managed to disable this power save function, most laptop motherboards/chipsets have automated power-saving features that kick in when the laptop is unplugged. At best, these are difficult to disable. Thus, it is strongly recommended that you not do performance testing when clients are battery operated.
As detailed previously, throughput performance may vary as legacy devices are introduced into the 802.11n environment. This is to be expected, but make sure that you find a channel void of all legacy transmissions if you want to test the high-water mark of your new 11n WLAN. If that isn't possible, adjust your expectations accordingly.
Ref.: Cisco 802.11n Design and Deployment Guidelines
Regards,
André

Can not get more than one computer to access internet

using airport and can not get more than one computer to access internet wirelessly... currently airport is in bridge mode and internet sharing is set to "off" in network preferences...
help - what should the settings be in airport and network preferences?

are using internet connection as dhcp?
Yes.
bridge mode seems to only work with pppoe connection to internet which is what my set up is
But you've never said why you're using bridge mode (I'm not), which -- as I've explained before -- is probably the reason you can connect only 1 client at a time.
If you'll setup the AX as a regular, main base station, connect using DHCP, and share IP addresses, you should be fine.

I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice. The other pairs with the mouse, but I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

Cannot run more than one instance of a remote app in remote desktop services Server 2012

All,
I installed "Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows Server 2012 Style" using the instructions here http://blogs.technet.com/b/yungchou/archive/2013/02/07/remote-desktop-services-rds-quick-start-deployment-for-remoteapp-windows-server-2012-style.aspx
I need to set up an image viewing program (Olyvia) to allow students using Macs and iPads access to this windows only application in order for them to get their work done. We may have 12 or more students accessing and trying to run the Olyvia application
at any one time.
All works good, except that I cannot run the Olyvia application (setup as a remoteapp program) more than one instance at a time. That is, when I start up "olyvia" on a Mac, it works great. If I leave it up and running, and then try
and start up "olyvia" on an iPad (using different accounts), I get the following error message:
"Cannot run more than one instance of this program simultaneously. Either the program is already running, or it has not been terminated completely."
I need to understand the root issue.
1. Is this a licensing issue? So, I need to add some CALs to the RDS server?
2. Is this a application issue with "olyvia"? So, no matter what I do, it is not going to be able to be used by more than one person at a time when configured as a remoteapp?
3. Did I not "publish" the application correctly?
4. Is this happening because I followed the "quick start" guide?
Appreciate any help I can get on this. We have no problem getting CALs, I just need some help with the root issue.
Thanks,
Geoff Weatherford
CVMBS, CSU

Hi Geoff,
Each application uses different techniques for determining if multiple instances are running. If you can determine what method it is using then perhaps you could use App-V or other virtualization software.
In the best case you really should direct your question to the maker of Olyvia. The reason I said that is they specifically designed their software to prevent multiple instances, so the first question is, why? Is it related to Licensing?
Compatibility? If you knew the specific reason(s) why they are doing it and the technique used then at the point using a virtualization technique may be the best option.
-TP

How can I get more than one firewre port ?

Hello,
how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
TIA

Hi ginestre-
Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
Luck-
-DP

Cannot Get More Than 3 Wireless Connections

Similar Messages

Maybe you are looking for