Cannot get my WRT54GS setup...please help!!!

I cannot seem to get this wireless router setup. Here are some of the problems I am experiencing:
I keep getting a message saying, "Error not message receiver"
WLAN light is not lit
At the end when it asks me to save my settings, It says something about unable to connect to the router
I am lost here... anyone able to help would be greatly appreciated

Let me be a little more specific... The router is connected to my dad's compaq presario pc and the internet works fine on that. I am trying to get my notebook to be able to connect to the internet with my wireless NIC. I know that the NIC is not the problem here because before we had DSL, I had the router plugged in, without anything hooked to it, and my notebook could connect to the router then. Now that I have the DSL, the notebook says "No Wireless Networks Found in Range"
I tried to connect to the router on the pc that is directly connected to it by typing 192.168.1.1 in IE, but does not work. I did an ipconfig and the default gateway is 192.168.254.254, and that does work... not sure how that got changed. I doubt that has anything to do with the problem, but I figured I'd tell you guys that anyways.
So if anyone has any advice please let me know. Thanks!

Similar Messages

I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

I have the 10.7.4 and I cannot get the Flash Player ,, please help me.

If you downloaded it, it's likely in your Downloads folder as a Disk Image .dmg. Just open it and intall Flash player and restart your browser. Everything should work.
Clinton

Gmail Cannot Get Mail...please help!

My iPhone and MacBook Native Mail apps both stopped responding to my main Gmail account. I have tried everything from deleting and re-adding the account in question, to restoring my iPhone (iOS 4), and setting it up as a new phone. I have checked my account settings through Gmail, and even changed my password. The error message I receive is:
Cannot Get Mail
The user name or password for "[email protected]" is incorrect.
or
Cannot Get Mail
The User Name or Password for "imap.gmail.com" is incorrect.
Again, I have logged in and out of my main account through the website with no problems. I am not sure what to do now.

I have a similar issue although mine seems to point towards the fault of Gmail.
I am using mail on 3 different devices
-iPhone 4 (current update)
-iPad 3G (current update)
-iMac 21.5" model (all current updates)
I use a work e-mail AND a personal e-mail, both through Gmail. My work and personal e-mail addresses have been working fine for quite some time. Yesterday however all of the sudden I am getting the same error "the username or password for "[email protected]" is incorrect". This is ONLY my work e-mail, my personal is still working fine on all 3 devices (which leads me to believe it's Gmail with the problem, not my devices). Not sure what to do and google does not have a support phone # or e-mail that i can find. If anyone can help that would be awesome.

I cannot get music to download- Please help!!!!!!!

I am on the verge of screaming and pulling my hair out!!!! Please help!!! nI got a new laptop and I downloaded my ipod(i think its the 1st gen) onto it. I also downloaded new music on my laptop, when I pulled up itunes to load my new songs onto my ipod I ran into multiple problems. I uninstalled and installed the software multiple times. Downloaded the updated versions and when I connected my ipod it still will not upload the music. I have searched everywhere on the support page, tried everything they suggested. Nothing works. Does anyone have any ideas or had this problem? OR am I going to be forced to buy a new one?

Here's what I did. I took songs and right-clicked them and clicked "add to playlist" I clicked on the name of my ipod shuffle, and it appeared in the contents section of my shuffle's zone. I made sure that the checkboxes next to the songs were checked, then clicked sync.
Hope this helps -:D-Scottdudester-:D-

Windows has the following information about this file type. This page will help you find software needed to open your file. Cannot get SEO quale loaded please help

I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloading

despite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.

Cannot Get Connection to Work, Please Help!

I just signed up and got the 7500 wireless gateway, set up all the wiring as illustrated (double checked 4 times to be sure). I have the E4 line going into my computer's jack and its supposed to provide wireless service anyway. My computer says it recognizes having connectivity, but when I run the Verizon setup CD, it keeps saying it can't connect during the test. I can't get anywhere on the web with any browser, but I can't see what is wrong.
Before anyone asks, my activation date was last Tuesday. I could really use some help!

Since some how and way, you can access the net - with the computer that you are posting from.
#1 Go to
https://www22.verizon.com/foryourhome/eRepairNet/DSLRepairANR/common/DSL_Repair.aspx
And check the order status.
#2 Also see as need https://www22.verizon.com/foryourhome/eRepairNet/DSLRepairANR/Common/SupportDetails.aspx?case=c18247
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

HT204204 got message Warning IOS Crash Report Due to a thirdp party application in your phone IOS is crashed...call for immediate support 16473604777 no i cannot get into Safari. Please help

Hi,
I was working on my New Ipad Mini in Safari when I received error Message Warning IOS Crash Report Due to a third party application in your phone. IOS crashed contact Support for immediate FIX 16473604447. What do I do i called that number and wasn't goint to pay someone other than applie to fix this error. I bought insurance, these people said Apple would not be able to help me.
please i need this ipad for a trip im taking in a couple of days.
I can't get into Safari the above error message keeps on popping up blocking me from getting in.

Double tap the Home button, then swipe upwards on the Safari preview.
Go to Settings - Safari - Clear History
Restart Safari.
And nd never, ever call any number presented.

Cannot get itunes to work please help

When I double clik on ITunes it takes ages to start then when i plug my ipod or shuffle in the window opens showing the drive ie. E:\ for my shuffle and i get the following message in itunes " The software required for communicating with the Ipod s not installed correctly. Please re-install ITunes to re-installthe Ipods software"
I have uninstalled and re-installed, clean out the registry tried selective startup.
Been without itunes for over a week now any help would be much appreciated.
I also installed Itunes on my works laptop and this operates fine and sees the ipods, all be it without my library.

this is what i get when i run diagnostics in itunes with shuffle connected
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gericom Ego
iTunes 7.7.0.43
QuickTime 7.5
CD Driver 2.0.7.3
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.0.0.33
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 00C44CCC186A10D9
Current user is an administrator.
The current local date and time is 2008-07-30 10:56:04.
iTunes is not running in safe mode.
Video Display Information
ATI MOBILITY RADEON 9700
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 7.7.0.43 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 2.0.28.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 . Device is working properly.
Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 . Device is working properly.
Intel(R) 82801DB/DBM USB2 Enhanced Host Controller - 24CD . Device is working properly.
FireWire (IEEE 1394) Host Controllers:
OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPod shuffle (2nd & 3rd Generation) running firmware version 1.0.4
Serial Number: 5E643ZULVTE

Cannot get SMTP to work, Please Help.

Hello,
I recently bought the WVC80N camera.
The main reason i purchased it was to have motion alerts emailed to me.
I have been trying all different combination for a week and still get TEST EMAIL FAILED.
Here are my specifics:
ISP: Verizon FiOS
I have a D-link N router setup as an access point that connects to my FiOS router/modem.
The camera connectes to the wireless on the D-Link router.
I have tried my ISP SMTP settings,
I have Verizon email through Yahoo! so I also tried those settings.
I made a GMX account and tried that, all with no luck.
Can someone please provide me some insight on how to get this working?
Thank You!
Solved!
Go to Solution.

For the camera to send you do NOT need to open ports, the camera is sending SMTP OUTBOUND, opening ports is for INBOUND traffic.
So, the issue lies within Verizon and not with Cisco, it's the way you are sending out and that verizon is blocking SMTP outbound unless the FROM address matches the Verizon domain and you are an authorized user with a valid email on there.
They may also have SMTP port 25 outbound BLOCKED, so you'd have to use an alternate port. Not sure since I don't have verizon. BUT, there is a solution with something like the TZO OMR service, which is outbound mail relay, allowing your camera to send through the TZO Servers and not Verizon. TZO accepts mail on port 2525 also, which allows you to get around the blocked port 25 from Verizon.
It's not cisco's fault, be mad at your ISP for locking crap down....not cisco
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

PS 6, Windows 7 64; installed second monitor and when renaming in bridge both screens fill with large film strip and I cannot get back to normal; please help!

@

Try a reset (click on that down pointing arrow) and also if you have a Mac, toggle the green resize button. It usually forces Bridge to resize to the screen.
If worse comes to worse, reset Bridge's Preferences as explained here: Troubleshoot errors, freezes | Adobe Bridge | Windows, Mac OS
When I use a external larger monitor, I select just that monitor.

Cannot get raid to work please help!!!

I have a msi p67a-gd80 (b3) board that im trying to configure a raid 0 array on. I have a ocz revodrive 100gb as the main and a WD caviar black 2TB as the second drive. ive been trying to figure out how to run these in raid and have come up short each time. Everytime i try to install the Intel Rapid Storage Technology Driver , it always says my system does not meet the requirments. Im running win7 64 bit.

Quote from: Stu on 07-July-11, 00:02:21
Not really. What kind of performance increase are you looking for?
Use your super-fast Revodrive as a boot drive, with your operating system installed on. Then use the 2TB drive as a 'storage' drive (and put your pagefile/swapfile on there also).
im using my revo as my boot drive but id also like to put a few games on it. but i also would like to put games on my HDD and other programs that dont need to be on the ssd. is there any way to do this? or am i just an idiot

Open script cannot get connection from the brower helper after 15 seconds.

Error:
===
Open script cannot get connection from the brower helper after 15 seconds. Do you want to continue waiting for the browser to load?
Please Note:
========
1. I have tried this only on IE
2. I am running OATS on a Remote desktop
Situation:
======
Trying to stop the recording
Try to get xpath of an object using Inspect Path
Setup details
========
Windows XP 5.1 Service Pack 3, x86
OpenScript 12.1.0.1.383
Internet Explorer 8.0.6001.18702
FireFox 13.0.1
Mitigation steps done till now:
==================
1. Disabled windows firewall
2. Disable XSS filter setting
3. Restarted the ATS services (3 of them)
4. Run the Open Script Diagnosis Tool (PS: There are 3 errros even after running it. The 3 errros are listed in the workspace_log log file snippet below...)
Error in worspace_log:
=============
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Did not auto-fix the problem.
!ENTRY oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor 4 0 2012-07-09 17:08:52.594
!MESSAGE Suggestion for fixing: Please change your Java proxy setting to Use Browser Settings
Aprreciate help on this.

To resolve this, you need to reconfigure the "Oracle Application Testing Suite Helper Service" (OATSHelperSvr) to start as a user who has privledges to run open script tests rather than the default SYSTEM user.
Reconfiguring the OATSHelperSvr Service:
1. Open the services panel (Start > Run > services.msc)
2. Find the Oracle Application Testing Suite Helper Service
3. Right Click > Properties then select the Log On Tab
4. Specify an interactive user that has rights to run OpenScript (test by logging in as that user and running tests):
5. Click OK
6. Restart the service after dialogs are closed by Right Click > Restart
7. You should now repeat this process for the "Oracle Application Testing Suite Agent Service" (eLoadAgentMon) Service (Two services in
total)
You should now retry running the test in Oracle Test Manager

I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help

Thank you Steve. Will do it straight away.
We can can continue talking this evening, no prob.
Rgds
Marco
Il giorno 16/mag/2014, alle ore 19:12, SG... <[email protected]> ha scritto:
I have dowloaded Photoshop + Lightroom (subscription) but no serial number have been provided for Photoshop CC so I cannot access the product. Please help
created by SG... in Photoshop General Discussion - View the full discussion
Hi,
When did you make the purchase? Can you try signing out of the CC desktop app, and then signing back in?
I'll see if I can get direct support sent your way as well. How much longer are you available for this evening? We can communicate directly as well if you prefer.
regards,
steve
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385161#6385161
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

I have just upgraded to Maverick, I cannot open vectorworks 2011 now. please help..

The way I resolved this issue was to create a dual boot Mac, so that I am able to boot from either Mountain Lion or Mavericks. Running Vectorworks in a virtual machine just didn’t cut it.
I had already upgraded to Mavericks, which meant that trying to install OS 10.8.5 as a second operating system produced the error message saying it cannot be installed on this computer.
First, if you need a copy of Mountain Lion installer and you has previously purchased it, open the App Store app, press the option key and then click on the purchases tab. You will see a list of all downloaded software from Apple and you can download OS 10.8.5 again without paying for it a second time. If you had previously created a boot disk of Mountain Lion, which I had not, you can obviously skip this step and the next.
You will need a boot disk for Mountain Lion. After downloading the Mountain Lion installer, the easiest way to create a boot disk is to use a slick little app called DiskMaker X, which you can get here: http://liondiskmaker.com Next you will need a USB flash drive of at least 8GB in size. Install and run DiskMaker X, plug in your flash drive, and follow the prompts. In just a few clicks, your boot drive will be easily created.
Next, you will need to add a partition on your startup drive on which you will install Mountain Lion. Here is the procedure for creating the new partition: http://macs.about.com/od/applications/ss/diskutilitysize.htm You can find this at Apple support, but this site gives you additional procedures that may be helpful. I set my new partition at 50 GB, but you can do with less is you don’t have the space.
With those two operations done, and your OS 10.8.5 boot drive plugged in, restart you Mac and press the option key after you hear the chime. You will be asked which drive you wish to start from- select the boot drive. After your Mac boots up, you will see several options- choose install Mountain Lion (actually I think the option is reinstall Mountain Lion).
After completing the OS install, install your copy of Vectorworks, copy and move whatever files you need to from Mavericks, and you are in business. To boot from either OS, simply press the option key and select OS 10.8.5 when you need to work in Vectorkorks, or OS 10.9 for all your other tasks. Switching back and forth isn’t as advantageous as otherwise, but it is the best way to run Vectorworks without upgrading for the $1,500 or so that would be required otherwise.

HT1212 "iphone is disabled, connect to itunes". I cannot get anything to work. Help!

I have tried to restore my iphone and nothing works! It starts the process for about 15 minutes then the phone goes back to the message "iphone is disabled, connect to itunes". I cannot get anything to work. Help! I am so frustrated with our iphones, that I am ready to switch to different phones for my entire family. Please help!!!

Did you check your security software settings, to make sure iTunes can contact Apple servers during the restore process?
iTunes: Troubleshooting security software issues

Cannot get my WRT54GS setup...please help!!!

Similar Messages

Maybe you are looking for