Cannot get Network Manager to start

I was using netcfg but I really wanted to switch to something that had a GUI. I am running kdemod (kde4) and networkmanager came with the install but it will not start... am I Missing something, i click it in the menu and it does absolutely nothing.... i have no idea where to go with this one.

JoeKer1086 wrote:I was using netcfg but I really wanted to switch to something that had a GUI. I am running kdemod (kde4) and networkmanager came with the install but it will not start... am I Missing something, i click it in the menu and it does absolutely nothing.... i have no idea where to go with this one.
I presume you read this?
http://wiki.archlinux.org/index.php/Networkmanager#KDE4
I just installed this recently and am using nm flawlessly on my desktop.  I just followed the wiki.
After installing the applet (pacman -S kdeplasma-applets-networkmanager) as it said in the wiki I was able to merely right click on it to get a menu to set up everything.  I'm using the standard KDE4 though.
I'm guessing you might have this one installed since you state kdemod?
There is new version of KNetworkManager in [kdemod-core] providing system tray icon and configuration:
# pacman -S kdemod-networkmanagement-knetworkmanager-kde4

Similar Messages

  • I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    I just installed OS X Yosemite on my MacBook. I now cannot get the computer to start up. If I hold down the power button to try and power it back up, it will not start. Any ideas on how to fix this?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Download and install the OS X Yosemite 10.10.3 Combo Update.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • I keep getting an error message that says that the hard drive cannot be repaired.  Therefore I cannot get the computer to start up.

    I keep getting an error message that says that the hard drive cannot be repaired.  Therefore I cannot get the computer to start up.

    It doesn't sound like you are doing anything incorrectly from what I can see. Have you tried restarting the iPad and then see if you can backup?
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help

    My photobooth deleted and I cannot get it back- put starter disk in and not an option to recopy..help!

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • Cannot get Lightroom trial to start on Windows 8 [was:lightroom]

    I cannot get lightroom trial to start. I am using windows 8

    I think you're getting the wrong end of the stick.
    Nothing to do with Lightroom not supporting your browser.
    It's a download issue often resolved by using a different browser.
    You could be downloading any software. This case just happens to be Lightroom. But it's not Lightroom's fault. It's the Adobe website.
    Anyway, I've got to go. Best of luck.

  • D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete.  When I click to start LR 2015 nothing happens.  I cannot get LR or PS started.  Previous versions start.

    D/L the creative cloud upgrades fro LR 2015, PS cc and Bridge and came back a 1/2 hour later and CC indicated the d/l was complete.  When I click to start LR 2015 nothing happens.  I cannot get LR or PS started.  Previous versions start.

    As stated in 1.:
    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
    Obviously, it will not harm your computer provided you follow the instructions. However, if you don't post your results in the thread where you were given those instructions, then the person helping you cannot help you further. As he asks at the end, "please post the test results on Pastebin, then post a link here to the page you created."

  • Cannot Get Media Manager on when I load Desktop Manager

    I'm hoping one of you can help me.  I've had my blackberry 8310 since January and I have the most annoying problem:
    I cannot get Media Manager to load.  I have tried every version of the Desktop Software WITH the Media Manager, but once I go throug the process of installing the software, MM does not pop-up as an icon in the Desktop Software.  I have completely unistalled and deleted the previous versions, but I cannot get this to work.  This week I uploaded the 4.05.15 in English With Media Manager, but still no success.  Any recommendations?

    I'm having the same issue.

  • I cannot get my Mini to start up?

    Also cannot get the Apple Cinema Display to start up.  Yesterday I hooked up the Cinema Display to my MacBook and used the large screen with that.  Then today when I hooked up the Mac Mini and Cinema Display by themselves they will not start up.  

    Didn't have the mini hooked up correctly.  The power cord was not in the power port on the rear of the Mini.  Then I had to reset the PMU.  Now all is fine.  It never pays to be in a hurry.  But it does pay to search for the correct answer in the Apple Support Communities.  Have a great day!   

  • Cannot get admin Server to start from nmStart

    I can not get the server to start and am lost on why:
    Here is the error in AdminServer.out
    <Apr 12, 2010 2:14:09 PM PDT> <Info> <Security> <BEA-090065> <Getting boot identity from user.>
    Enter username to boot WebLogic server: Error Failed to get value from Standard Input <---- why is this happening.
    Enter password to boot WebLogic server:
    <Apr 12, 2010 2:14:10 PM PDT> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
    <Apr 12, 2010 2:14:10 PM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Apr 12, 2010 2:14:10 PM PDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Apr 12, 2010 2:14:10 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file D:\bea\user_projects\domains\ALC\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
    <Apr 12, 2010 2:14:13 PM PDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Apr 12, 2010 2:14:13 PM PDT> <Critical> <Security> <BEA-090403> <Authentication for user denied>
    <Apr 12, 2010 2:14:13 PM PDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication for user denied
    weblogic.security.SecurityInitializationException: Authentication for user denied
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:947)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    Truncated. see log file for complete stacktrace
    I have tried to setup the userConfigFile and UserKeyFile.
    Any pointers to know what to look for..

    Hi
    1. Looking carefully at the following 3 lines in server statup logs, after 2:20:39 PM GST, server waited like for 16 mts like 2:36:43 and invoked the Force Shutdown. Possible reasons I gave below.
    ####<Feb 14, 2010 2:20:37 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142837729> <BEA-423101> <[console] Initializing the NetUIx container>
    ####<Feb 14, 2010 2:20:39 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142839433> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [webapp]. Classifications functionality not enabled.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <1266143803604> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
    2. Since you mentioned this worked fine and nothing else is changed over a year, the possible cause may be like this. Looks like you have some Documentum stuff (or webapp or modules) loaded on this server. I am not much familiar with EMC Documentum stuff, except that we use that as external Content Management repository for Portal Applications. Looking at the full thread dump for thread 0, looks like documentum code is trying to publish something or interact with its documentum server and may be it is not getting the response back. So make sure if any external systems that this WLS interacts are all up and running.
    HTH
    Ravi Jegga

  • [SOLVED]nm-applet fails to start. Cannot get network GUI on i3

    Hello,
    I'd like to be able to find available wireless access points and connect to them via a gui, but since I'm using i3 wm, there's no clickable icon on the bottom for such a purpose. Networkmanager and nm-applet are both started, and I do connect successfully to the internet. However, when I try to run nm-applet to get a GUI, I get the following error:
    Could not initialize nm-client /org/freedesktop/NetworkManager: Rejected SendMessage....
    Thanks for your help
    Last edited by doubleslash (2013-03-04 15:32:30)

    doubleslash wrote:
    Hello,
    I'd like to be able to find available wireless access points and connect to them via a gui, but since I'm using i3 wm, there's no clickable icon on the bottom for such a purpose. Networkmanager and nm-applet are both started, and I do connect successfully to the internet. However, when I try to run nm-applet to get a GUI, I get the following error:
    Could not initialize nm-client /org/freedesktop/NetworkManager: Rejected SendMessage....
    Thanks for your help
    Possibly because you don't have a "tray." Check this Wiki entry . You can also consider tint2. I think that's what you're asking.

  • WLS 10.0 cannot get Admin Console to start

    Hi,
    We have WLS 10.0 with Jrocket on a Windows Server.
    We have two domains and they have been working fine for well over a year until this morning. I cannot bring up the Admin Console for the 2 domains. The domains are setup to start up automatically and they get stopped and started every Saturday. This week the restart seems to have failed, The services were showing as started but we could not login into the WLS Admin Console or the web applications that the domains host.
    As far as i know nothing should have changed with the server.
    Event viewer is not showing any issues.
    I tried to start the WLS for the 'da' domain from the cmd line and am now seeing the following in the AdminServer.log (FYI, the domain log is not being created). I have had to remove some lines to make the post :
    ========================================================================
    ####<Feb 14, 2010 2:20:15 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <> <Main Thread> <> <> <> <1266142815354> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    D:\bea10\wlserver_10.0\platform\lib\p13n\p13n-schemas.jar;D:\bea10\wlserver_10.0\platform\lib\p13n\p13n_common.jar;D:\bea10\wlserver_10.0\platform\lib\p13n\p13n_system.jar;D:\bea10\wlserver_10.0\platform\lib\wlp\netuix_common.jar;D:\bea10\wlserver_10.0\platform\lib\wlp\netuix_schemas.jar;D:\bea10\wlserver_10.0\platform\lib\wlp\netuix_system.jar;D:\bea10\wlserver_10.0\platform\lib\wlp\wsrp-client.jar;D:\bea10\wlserver_10.0\platform\lib\wlp\wsrp-common.jar>
    ####<Feb 14, 2010 2:20:15 PM GST> <Info> <WebLogicServer> <ePIMSEDMS2> <> <Main Thread> <> <> <> <1266142815870> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R26.4.0-63_CR302700-72606-1.5.0_06-20061127-1108-win-ia32 from BEA Systems, Inc.>
    ####<Feb 14, 2010 2:20:16 PM GST> <Info> <Management> <ePIMSEDMS2> <> <Main Thread> <> <> <> <1266142816183> <BEA-141107> <Version: WebLogic Server 10.0 Wed May 9 18:10:27 EDT 2007 933139 >
    ####<Feb 14, 2010 2:20:17 PM GST> <Info> <WebLogicServer> <ePIMSEDMS2> <> <Main Thread> <> <> <> <1266142817511> <BEA-000215> <Loaded License : D:\bea10\license.bea>
    ####<Feb 14, 2010 2:20:17 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <> <Main Thread> <> <> <> <1266142817526> <BEA-000365> <Server state changed to STARTING>
    ####<Feb 14, 2010 2:20:23 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1266142823995> <BEA-000365> <Server state changed to STANDBY>
    ####<Feb 14, 2010 2:20:24 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1266142824011> <BEA-000365> <Server state changed to STARTING>
    ####<Feb 14, 2010 2:20:24 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142824026> <BEA-149209> <Resuming.>
    ####<Feb 14, 2010 2:20:24 PM GST> <Info> <WorkManager> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142824183> <BEA-002901> <Creating WorkManager "consoleWorkManager" for module "null" and application "consoleapp">
    ####<Feb 14, 2010 2:20:24 PM GST> <Info> <J2EE> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142824292> <BEA-160192> <While upgrading weblogic.xml, encountered "debug" param "jsp-param". This param is unknown and will be removed>
    ####<Feb 14, 2010 2:20:24 PM GST> <Info> <J2EE> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142824698> <BEA-160192> <While upgrading weblogic.xml, encountered "debug" param "jsp-param". This param is unknown and will be removed>
    ####<Feb 14, 2010 2:20:25 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142825011> <BEA-149059> <Module da.war of application da is transitioning from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Feb 14, 2010 2:20:25 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142825354> <BEA-149060> <Module da.war of application da successfully transitioned from STATE_NEW to STATE_PREPARED on server AdminServer.>
    ####<Feb 14, 2010 2:20:25 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142825370> <BEA-149059> <Module da.war of application da is transitioning from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Feb 14, 2010 2:20:25 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142825370> <BEA-149060> <Module da.war of application da successfully transitioned from STATE_PREPARED to STATE_ADMIN on server AdminServer.>
    ####<Feb 14, 2010 2:20:37 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142837729> <BEA-423101> <[console] Initializing the NetUIx container>
    ####<Feb 14, 2010 2:20:39 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1266142839433> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [webapp]. Classifications functionality not enabled.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803604> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
    ####<Feb 14, 2010 2:36:43 PM GST> <Alert> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803620> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
    ####<Feb 14, 2010 2:36:43 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803620> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <JMX> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803683> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.113.202.96:8101/jndi/weblogic.management.mbeanservers.edit .>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <JMX> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803683> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://10.113.202.96:8101/jndi/weblogic.management.mbeanservers.runtime .>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <WebService> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803683> <BEA-220028> <Web Service reliable agents are suspended.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <WebService> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803683> <BEA-220029> <Web Service reliable agents are shut down.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <SAFService> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803698> <BEA-281004> <SAF Service has been suspended.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <SAFService> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803698> <BEA-281005> <SAF Service has been shut down.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Info> <Deployer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <> <> <1266143803714> <BEA-149059> <Module da.war of application da is transitioning from STATE_ADMIN to STATE_NEW on server AdminServer.>
    ####<Feb 14, 2010 2:36:49 PM GST> <Info> <Management> <ePIMSEDMS2> <AdminServer> <ApplicationFilePoller-consoleapp> <<anonymous>> <> <> <1266143809277> <BEA-400411> <ApplicationFilePoller exiting. Further application file updates will not be seen.>
    ####<Feb 14, 2010 2:37:13 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-19> <<WLS Kernel>> <> <> <1266143833624> <BEA-000378> <Server failed to shutdown within the configured timeout of 30 seconds. The server process will exit now.>
    ####<Feb 14, 2010 2:37:13 PM GST> <Error> <> <ePIMSEDMS2> <AdminServer> <Thread-19> <<WLS Kernel>> <> <> <1266143833640> <BEA-000000> <
    ===== FULL THREAD DUMP ===============
    Sun Feb 14 14:37:13 2010
    BEA JRockit(R) R26.4.0-63_CR302700-72606-1.5.0_06-20061127-1108-win-ia32
    "Main Thread" id=1 idx=0x2 tid=8140 prio=5 alive, in native, blocked
    -- Blocked trying to get lock: java/lang/Class@0x00DB5430[thin lock]
    at jrockit/vm/Threads.sleep(I)V(Native Method)
    at jrockit/vm/Locks.waitForThinRelease(Ljava/lang/Object;I)I(Unknown Source)
    at jrockit/vm/Locks.monitorEnterSecondStage(Ljava/lang/Object;I)Ljava/lang/Object;(Unknown Source)
    at jrockit/vm/Locks.monitorEnter(Ljava/lang/Object;)Ljava/lang/Object;(Unknown Source)
    at java/lang/Shutdown.exit(I)V(Unknown Source)
    at java/lang/Runtime.exit(I)V(Runtime.java:90)
    at java/lang/System.exit(I)V(Unknown Source)
    at weblogic/Server.main([Ljava/lang/String;)V(Server.java:87)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    -- end of trace
    "(Signal Handler)" id=2 idx=0x4 tid=1196 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: weblogic/t3/srvr/T3Srvr$2@0x00DEDF70[fat lock]
    at jrockit/vm/Threads.waitForSignal(J)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)
    at java/lang/Thread.join(J)V(Unknown Source)
    ^-- Lock released while waiting: weblogic/t3/srvr/T3Srvr$2@0x00DEDF70[fat lock]
    at java/lang/Thread.join()V(Unknown Source)
    at java/lang/Shutdown.runHooks()V(Unknown Source)
    at java/lang/Shutdown.sequence()V(Unknown Source)
    at java/lang/Shutdown.exit(I)V(Unknown Source)
    ^-- Holding lock: java/lang/Class@0x00DB5430[thin lock]
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    -- end of trace
    "(Code Generation Thread 1)" id=3 idx=0x6 tid=1736 prio=5 alive, in native, native_waiting, daemon
    "(Code Optimization Thread 1)" id=4 idx=0x8 tid=436 prio=5 alive, in native, native_waiting, daemon
    "(GC Main Thread)" id=5 idx=0xa tid=3404 prio=5 alive, in native, daemon
    "(GC Worker Thread 1)" id=? idx=0xc tid=7548 prio=5 alive, native_waiting, daemon
    "(GC Worker Thread 2)" id=? idx=0xe tid=8164 prio=5 alive, native_waiting, daemon
    "(GC Worker Thread 3)" id=? idx=0x10 tid=6716 prio=5 alive, native_waiting, daemon
    "(GC Worker Thread 4)" id=? idx=0x12 tid=5452 prio=5 alive, native_waiting, daemon
    "(VM Periodic Task)" id=6 idx=0x14 tid=4496 prio=10 alive, in native, daemon
    "Timer-0" id=11 idx=0x1a tid=7536 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: java/util/TaskQueue@0x00CB5758[fat lock]
    at jrockit/vm/Threads.waitForSignal(J)Z(Native Method)
    at jrockit/vm/Locks.wait(Ljava/lang/Object;J)V(Unknown Source)
    at java/lang/Object.wait()V(Native Method)
    at java/util/TimerThread.mainLoop()V(Timer.java:483)
    ^-- Lock released while waiting: java/util/TaskQueue@0x00CB5758[fat lock]
    at java/util/TimerThread.run()V(Timer.java:462)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    -- end of trace
    "Timer-1" id=12 idx=0x1c tid=5060 prio=5 alive, in native, waiting, daemon
    -- Waiting for notification on: java/util/TaskQueue@0x04F27760[fat lock]
    at jrockit/vm/Threads.waitForSignal(J)Z(Native Method)
    at java/lang/Object.wait(J)V(Native Method)
    at java/util/TimerThread.mainLoop()V(Timer.java:509)
    ^-- Lock released while waiting: java/util/TaskQueue@0x04F27760[fat lock]
    at java/util/TimerThread.run()V(Timer.java:462)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    -- end of trace
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=13 idx=0x1e tid=732 prio=5 alive, in native, daemon
    at sun/nio/ch/SocketDispatcher.read0(Ljava/io/FileDescriptor;JI)I(Native Method)
    at sun/nio/ch/SocketDispatcher.read(Ljava/io/FileDescriptor;JI)I(SocketDispatcher.java:25)
    at sun/nio/ch/IOUtil.readIntoNativeBuffer(Ljava/io/FileDescriptor;Ljava/nio/ByteBuffer;JLsun/nio/ch/NativeDispatcher;Ljava/lang/Object;)I(IOUtil.java:233)
    at sun/nio/ch/IOUtil.read0(Ljava/io/FileDescriptor;Ljava/nio/ByteBuffer;JLsun/nio/ch/NativeDispatcher;Ljava/lang/Object;)I(IOUtil.java:200)
    at sun/nio/ch/IOUtil.read(Ljava/io/FileDescriptor;Ljava/nio/ByteBuffer;JLsun/nio/ch/NativeDispatcher;Ljava/lang/Object;)I(Unknown Source)
    at sun/nio/ch/SocketChannelImpl.read(Ljava/nio/ByteBuffer;)I(SocketChannelImpl.java:207)
    ^-- Holding lock: java/lang/Object@0x0707C800[thin lock]
    at com/documentum/fc/impl/util/io/MessageChannel.readSocket(Ljava/nio/ByteBuffer;I)V(MessageChannel.java:123)
    at com/documentum/fc/impl/util/io/MessageChannel.readLength()I(MessageChannel.java:100)
    at com/documentum/fc/impl/util/io/MessageChannel.getIncomingMessageLength()I(MessageChannel.java:92)
    at com/documentum/fc/impl/util/io/MessageChannel.read(Ljava/nio/ByteBuffer;)I(MessageChannel.java:77)
    ^-- Holding lock: com/documentum/fc/impl/util/io/MessageChannel@0x07088B80[thin lock]
    at com/documentum/fc/client/impl/connection/netwise/AbstractNetwiseRpcClient.receiveMessage(Ljava/nio/ByteBuffer;)V(AbstractNetwiseRpcClient.java:167)
    at com/documentum/fc/client/impl/connection/docbase/netwise/NetwiseDocbaseRpcClient.applyForStringInternal(Ljava/lang/String;Lcom/documentum/fc/common/IDfId;Lcom/documentum/fc/client/impl/typeddata/ITypedData;ZZ)Ljava/lang/String;(NetwiseDocbaseRpcClient.java:746)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/netwise/NetwiseDocbaseRpcClient@0x07088C18[recursive]
    at com/documentum/fc/client/impl/connection/docbase/netwise/NetwiseDocbaseRpcClient.fetchTypeViaApply(Ljava/lang/String;I)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(NetwiseDocbaseRpcClient.java:894)
    at com/documentum/fc/client/impl/connection/docbase/netwise/NetwiseDocbaseRpcClient.fetchType(Ljava/lang/String;I)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(NetwiseDocbaseRpcClient.java:821)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/netwise/NetwiseDocbaseRpcClient@0x07088C18[thin lock]
    at com/documentum/fc/client/impl/connection/docbase/DocbaseConnection$11.evaluate()Ljava/lang/Object;(DocbaseConnection.java:1309)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/DocbaseConnection@0x06E11D48[recursive]
    at com/documentum/fc/client/impl/connection/docbase/DocbaseConnection.evaluateRpc(Lcom/documentum/fc/impl/util/Functor;Z)Ljava/lang/Object;(DocbaseConnection.java:1014)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/DocbaseConnection@0x06E11D48[recursive]
    at com/documentum/fc/client/impl/connection/docbase/DocbaseConnection.fetchType(Ljava/lang/String;Z)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(DocbaseConnection.java:1302)
    at com/documentum/fc/client/impl/connection/LiteTypeManager.getRawType(Ljava/lang/String;Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(LiteTypeManager.java:104)
    at com/documentum/fc/client/impl/connection/LiteTypeManager.getType(Ljava/lang/String;Ljava/util/List;Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(LiteTypeManager.java:78)
    at com/documentum/fc/client/impl/connection/LiteTypeManager.getType(Ljava/lang/String;Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(LiteTypeManager.java:61)
    at com/documentum/fc/client/impl/connection/docbase/DocbaseConnection.getLiteType(Ljava/lang/String;)Lcom/documentum/fc/client/impl/typeddata/ILiteType;(DocbaseConnection.java:1421)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/DocbaseConnection@0x06E11D48[recursive]
    at com/documentum/fc/client/impl/Docbase.typeExists(Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;Ljava/lang/String;)Z(Docbase.java:143)
    at com/documentum/fc/client/impl/Docbase.determineBof2Support(Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;)V(Docbase.java:133)
    at com/documentum/fc/client/impl/Docbase.<init>(Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;Lcom/documentum/fc/client/impl/Server;)V(Docbase.java:90)
    at com/documentum/fc/client/impl/Docbase.getInstance(Lcom/documentum/fc/client/impl/connection/docbase/IDocbaseConnection;Lcom/documentum/fc/client/impl/Server;)Lcom/documentum/fc/client/impl/Docbase;(Docbase.java:58)
    ^-- Holding lock: java/util/HashMap@0x091A3598[thin lock]
    at com/documentum/fc/client/impl/connection/docbase/DocbaseConnection.getDocbase()Lcom/documentum/fc/client/impl/Docbase;(DocbaseConnection.java:1553)
    ^-- Holding lock: com/documentum/fc/client/impl/connection/docbase/DocbaseConnection@0x06E11D48[thin lock]
    at com/documentum/fc/client/impl/session/Session.getDocbase()Lcom/documentum/fc/client/impl/Docbase;(Session.java:3113)
    at com/documentum/fc/client/impl/session/Session.getObjectManager(Lcom/documentum/fc/common/IDfId;)Lcom/documentum/fc/client/impl/objectmanager/PersistentObjectManager;(Session.java:775)
    at com/documentum/fc/client/impl/session/Session.getObject(Lcom/documentum/fc/common/IDfId;)Lcom/documentum/fc/client/IDfPersistentObject;(Session.java:834)
    at com/documentum/fc/client/impl/session/SessionHandle.getObject(Lcom/documentum/fc/common/IDfId;)Lcom/documentum/fc/client/IDfPersistentObject;(SessionHandle.java:580)
    at com/documentum/fc/client/security/impl/IpAndRcHelper.getRegistration(Lcom/documentum/fc/client/security/internal/IPublicIdentity;Lcom/documentum/fc/client/IDfSession;)Lcom/documentum/fc/client/privilege/internal/IClientRegistration;(IpAndRcHelper.java:472)
    at com/documentum/fc/client/security/impl/DfcIdentityPublisher.getRegistration(Lcom/documentum/fc/client/security/internal/IPublicIdentity;Lcom/documentum/fc/client/IDfSession;)Lcom/documentum/fc/client/privilege/internal/IClientRegistration;(DfcIdentityPublisher.java:469)
    at com/documentum/fc/client/security/impl/DfcIdentityPublisher.isRegistration(Lcom/documentum/fc/client/security/internal/IPublicIdentity;Lcom/documentum/fc/client/IDfSession;)Z(DfcIdentityPublisher.java:446)
    at com/documentum/fc/client/security/impl/DfcIdentityPublisher.publish(Z)V(DfcIdentityPublisher.java:134)
    ^-- Holding lock: java/lang/Object@0x03E097F0[thin lock]
    at com/documentum/fc/client/security/impl/DfcIdentityPublisher.publish()V(DfcIdentityPublisher.java:102)
    at com/documentum/fc/client/security/internal/RegistrationMgr.register()Z(RegistrationMgr.java:34)
    at com/documentum/fc/impl/RuntimeContext.<clinit>()V(RuntimeContext.java:191)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    at jrockit/vm/RNI.generateFixedCode(I)I(Native Method)
    at com/documentum/fc/impl/RuntimeContext.getInstance()Lcom/documentum/fc/impl/RuntimeContext;(RuntimeContext.java:0)
    at com/documentum/fc/client/DfClient.<clinit>()V(DfClient.java:700)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    at jrockit/vm/RNI.generateFixedCode(I)I(Native Method)
    at com/documentum/fc/client/DfClient.getLocalClient()Lcom/documentum/fc/client/IDfClient;(DfClient.java:0)
    at com/documentum/com/DfClientX.getLocalClient()Lcom/documentum/fc/client/IDfClient;(DfClientX.java:43)
    at com/documentum/web/env/NotificationManager.contextInitialized(Ljavax/servlet/ServletContextEvent;)V(NotificationManager.java:101)
    at weblogic/servlet/internal/EventsManager$FireContextListenerAction.run()Ljava/lang/Object;(EventsManager.java:458)
    at weblogic/security/acl/internal/AuthenticatedSubject.doAs(Lweblogic/security/subject/AbstractSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(AuthenticatedSubject.java:321)
    at weblogic/security/service/SecurityManager.runAs(Lweblogic/security/acl/internal/AuthenticatedSubject;Lweblogic/security/acl/internal/AuthenticatedSubject;Ljava/security/PrivilegedAction;)Ljava/lang/Object;(Unknown Source)
    at weblogic/servlet/internal/EventsManager.notifyContextCreatedEvent()V(EventsManager.java:168)
    at weblogic/servlet/internal/WebAppServletContext.preloadResources()V(WebAppServletContext.java:1721)
    ^-- Holding lock: weblogic/servlet/internal/WebAppServletContext@0x0E953B38[thin lock]
    at weblogic/servlet/internal/WebAppServletContext.start()V(WebAppServletContext.java:2890)
    at weblogic/servlet/internal/WebAppModule.startContexts()V(WebAppModule.java:948)
    at weblogic/servlet/internal/WebAppModule.start()V(WebAppModule.java:353)
    at weblogic/application/internal/flow/ModuleStateDriver$3.next(Ljava/lang/Object;)V(ModuleStateDriver.java:204)
    at weblogic/application/utils/StateMachineDriver.nextState(Lweblogic/application/utils/StateChange;[Ljava/lang/Object;)V(StateMachineDriver.java:26)
    at weblogic/application/internal/flow/ModuleStateDriver.start([Lweblogic/application/Module;)V(ModuleStateDriver.java:60)
    at weblogic/application/internal/flow/ScopedModuleDriver.start()V(ScopedModuleDriver.java:200)
    at weblogic/application/internal/flow/ModuleListenerInvoker.start()V(ModuleListenerInvoker.java:117)
    at weblogic/application/internal/flow/ModuleStateDriver$3.next(Ljava/lang/Object;)V(ModuleStateDriver.java:204)
    at weblogic/application/utils/StateMachineDriver.nextState(Lweblogic/application/utils/StateChange;[Ljava/lang/Object;)V(StateMachineDriver.java:26)
    at weblogic/application/internal/flow/ModuleStateDriver.start([Lweblogic/application/Module;)V(ModuleStateDriver.java:60)
    at weblogic/application/internal/flow/StartModulesFlow.activate()V(StartModulesFlow.java:26)
    at weblogic/application/internal/BaseDeployment$2.next(Ljava/lang/Object;)V(BaseDeployment.java:635)
    at weblogic/application/utils/StateMachineDriver.nextState(Lweblogic/application/utils/StateChange;[Ljava/lang/Object;)V(StateMachineDriver.java:26)
    at weblogic/application/internal/BaseDeployment.activate(Lweblogic/deploy/container/DeploymentContext;)V(BaseDeployment.java:212)
    at weblogic/application/internal/DeploymentStateChecker.activate(Lweblogic/deploy/container/DeploymentContext;)V(DeploymentStateChecker.java:154)
    at weblogic/deploy/internal/targetserver/AppContainerInvoker.activate(Lweblogic/deploy/container/DeploymentContext;)V(AppContainerInvoker.java:80)
    at weblogic/deploy/internal/targetserver/BasicDeployment.activate(Lweblogic/deploy/container/DeploymentContext;)V(BasicDeployment.java:182)
    at weblogic/deploy/internal/targetserver/BasicDeployment.activateFromServerLifecycle()V(BasicDeployment.java:359)
    at weblogic/management/deploy/internal/DeploymentAdapter$1.doActivate(Ljava/lang/Object;)V(DeploymentAdapter.java:51)
    at weblogic/management/deploy/internal/DeploymentAdapter.activate(Ljava/lang/Object;)V(DeploymentAdapter.java:196)
    at weblogic/management/deploy/internal/AppTransition$2.transitionApp(Lweblogic/management/deploy/internal/DeploymentAdapter;Ljava/lang/Object;)V(AppTransition.java:30)
    at weblogic/management/deploy/internal/ConfiguredDeployments.transitionApps(Lweblogic/management/deploy/internal/AppTransition;)V(ConfiguredDeployments.java:233)
    at weblogic/management/deploy/internal/ConfiguredDeployments.activate()V(ConfiguredDeployments.java:169)
    at weblogic/management/deploy/internal/ConfiguredDeployments.deploy()V(ConfiguredDeployments.java:123)
    at weblogic/management/deploy/internal/DeploymentServerService.resume()V(DeploymentServerService.java:173)
    at weblogic/management/deploy/internal/DeploymentServerService.start()V(DeploymentServerService.java:89)
    at weblogic/t3/srvr/SubsystemRequest.run()V(SubsystemRequest.java:64)
    at weblogic/work/ExecuteThread.execute(Ljava/lang/Runnable;)V(ExecuteThread.java:200)
    at weblogic/work/ExecuteThread.run()V(ExecuteThread.java:172)
    at jrockit/vm/RNI.c2java(IIII)V(Native Method)
    -- end of trace
    Open lock chains
    ================
    Chain 1:
    "Main Thread" id=1 idx=0x2 tid=8140 waiting for java/lang/Class@0x00DB5430 held by:
    "(Signal Handler)" id=2 idx=0x4 tid=1196 (waiting on notification)
    Chain 2:
    "Thread-1" id=10 idx=0x54 tid=1624 waiting for weblogic/servlet/internal/WebAppServletContext@0x0E953B38 held by:
    "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" id=13 idx=0x1e tid=732 (active)
    ===== END OF THREAD DUMP ===============
    >
    There is enough memory, and the CPU usaage does not get too high.
    I have searched the forums and cant find what could be causing the blocking.
    The startup hangs at the following line :
    <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    doing a Ctrl-C to stop the startup then produces the dump entries in the adminserver.log file :
    There is no error or warning in the adminserver.log file.
    What should I be checking to find out what is going on ? is this a known issue ?
    Thanks.

    Hi
    1. Looking carefully at the following 3 lines in server statup logs, after 2:20:39 PM GST, server waited like for 16 mts like 2:36:43 and invoked the Force Shutdown. Possible reasons I gave below.
    ####<Feb 14, 2010 2:20:37 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142837729> <BEA-423101> <[console] Initializing the NetUIx container>
    ####<Feb 14, 2010 2:20:39 PM GST> <Info> <netuix> <ePIMSEDMS2> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <1266142839433> <BEA-423120> <WEB-INF/client-classifications.xml file not found at uri [webapp]. Classifications functionality not enabled.>
    ####<Feb 14, 2010 2:36:43 PM GST> <Notice> <WebLogicServer> <ePIMSEDMS2> <AdminServer> <Thread-1> <<WLS Kernel>> <1266143803604> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
    2. Since you mentioned this worked fine and nothing else is changed over a year, the possible cause may be like this. Looks like you have some Documentum stuff (or webapp or modules) loaded on this server. I am not much familiar with EMC Documentum stuff, except that we use that as external Content Management repository for Portal Applications. Looking at the full thread dump for thread 0, looks like documentum code is trying to publish something or interact with its documentum server and may be it is not getting the response back. So make sure if any external systems that this WLS interacts are all up and running.
    HTH
    Ravi Jegga

  • Cannot get Oracle 10g to start on a G5.  Floating point exception

    After a very painful 10g (EE) installation process i.e fixing all the following:
    1) Created the missing /opt directory
    2) Installation of XCode 1.2
    3) Fixing the root.sh file
    4) Downloaded the crstl file provided by Ron
    5) Copied /etc/oratab/oratab to /etc/oratab
    I tried bringing up the Oracle 10g instance by logging onto Sql*Plus as sysdba and running
    startup nomount pfile ='/Users/oracle/admin/db01/scripts/init.ora''. The instance comes up for a few socunds and crashes. This is what i get in the alert.log
    ==========================================================
    Sat Jul 17 11:40:08 2004
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Picked latch-free SCN scheme 2
    KCCDEBUG_LEVEL = 0
    Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
    Autotune of undo retention is turned on.
    Dynamic strands is set to TRUE
    Running with 2 shared and 18 private strand(s). Zero-copy redo is FALSE
    IMODE=BR
    ILAT =18
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    Starting up ORACLE RDBMS Version: 10.1.0.3.0.
    System parameters with non-default values:
    processes = 150
    sga_target = 146800640
    control_files = /Users/oracle/oradata/db01/control01.ctl, /Users/oracle/oradata/db01/control02.ctl, /Users/oracle/oradata/db01/control03.ctl
    db_block_size = 8192
    compatible = 10.1.0.2.0
    db_file_multiblock_read_count= 16
    db_recovery_file_dest = /Users/oracle/flash_recovery_area
    db_recovery_file_dest_size= 2147483648
    undo_management = AUTO
    undo_tablespace = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain =
    dispatchers = (PROTOCOL=TCP) (SERVICE=db01XDB)
    job_queue_processes = 10
    background_dump_dest = /Users/oracle/admin/db01/bdump
    user_dump_dest = /Users/oracle/admin/db01/udump
    core_dump_dest = /Users/oracle/admin/db01/cdump
    db_name = db01
    open_cursors = 300
    pga_aggregate_target = 16777216
    PMON started with pid=2, OS id=4037
    MMAN started with pid=3, OS id=4039
    DBW0 started with pid=4, OS id=4041
    LGWR started with pid=5, OS id=4043
    CKPT started with pid=6, OS id=4045
    SMON started with pid=7, OS id=4047
    RECO started with pid=8, OS id=4049
    Sat Jul 17 11:40:16 2004
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    CJQ0 started with pid=9, OS id=4051
    Sat Jul 17 11:40:16 2004
    starting up 1 shared server(s) ...
    Sat Jul 17 11:40:18 2004
    Errors in file /Users/oracle/admin/db01/bdump/db01_ckpt_4045.trc:
    ORA-07445: exception encountered: core dump [semop+8] [SIGFPE] [Invalid floating point operation] [0xA0004CE4] [] []
    Sat Jul 17 11:40:19 2004
    Errors in file /Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
    ORA-07445: exception encountered: core dump [semop+8] [SIGFPE] [Invalid floating point operation] [0x41EDB3C] [] []
    Sat Jul 17 11:40:21 2004
    Errors in file /Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
    ORA-00822: MMAN process terminated with error
    Sat Jul 17 11:40:21 2004
    PMON: terminating instance due to error 822
    Instance terminated by PMON, pid = 4037
    ==========================================================
    Any idea on what needs to be done to fix this error. I remember that i had the very same issue with the Oracle 9i R2 Developers release.
    Any help will be greatly appreciated.

    After a very painful 10g (EE) installation process
    i.e fixing all the following:<snip>
    Sat Jul 17 11:40:19 2004
    Errors in file
    /Users/oracle/admin/db01/bdump/db01_mman_4039.trc:
    ORA-07445: exception encountered: core dump [semop+8]
    [SIGFPE] [Invalid floating point operation]
    [0x41EDB3C] [] []
    Sat Jul 17 11:40:21 2004
    Errors in file
    /Users/oracle/admin/db01/bdump/db01_pmon_4037.trc:
    ORA-00822: MMAN process terminated with error
    Sat Jul 17 11:40:21 2004
    PMON: terminating instance due to error 822
    Instance terminated by PMON, pid = 4037==============================================> Any idea on what needs to be done to fix this error.
    I remember that i had the very same issue with the
    Oracle 9i R2 Developers release.
    Any help will be greatly appreciated.You mentioned the 9ir2 release. Do you still have any reference to the 9ir2 software in your environment ? With a little luck you have, and in that case it not so hard to find a solution ...
    Ronald.
    http://homepage.mac.com/ik_zelf/oracle

  • I cannot get my photoshop to start up

    I tried to start up my photoshop this afternoon to edit and was shown a dialog box saying that my 30 day free trial was up and I needed to license it. I called Adobe and had to wait nearly 2 hours to get in touch with someone. Then he told me he would have to call me back at 3:30 and he never did. As of now, I have been on hold for an hour(when the wait time said 20 minutes) and I STILL cannot access my photoshop

    Didn't have the mini hooked up correctly.  The power cord was not in the power port on the rear of the Mini.  Then I had to reset the PMU.  Now all is fine.  It never pays to be in a hurry.  But it does pay to search for the correct answer in the Apple Support Communities.  Have a great day!   

  • Cannot get network to work properly on fresh install

    I just got myself a new lenovo laptop and naturally wanted to instakll arch on it immediately.
    The network I am on requires me to register the MAC address of the machine before I can access anything more than our intranet. Since this is done via a website, that is obviously difficult to do with arch, so I ran a mandriva livecd first to register it.
    Quirk number one: I set up a new partition table and installed arch with grub. somehow one of these things actually changed my MAC address because I needed to reregister it and I could tell there it was a new one registered.
    However, booting into arch again and I still can't get it to work properly. pinging our intranet address works fine, but I can't get to the www and so cannot install any new packages.
    I've installed mandriva on a separate partition and here it all works fine. So the problem seems to be with Arch. My uneducated guess is that it somehow registers as having a different MAC address in arch, which of course creates a bit of a catch-22 because I can't install the packages needed to go to our intranet website and fix it (I should note - once I re-registered my mac address after creating a new partition table, I could complete a net-install of arch. but no internet access having booted into it).
    Anyone know how I can fix this?

    tuxce wrote:actually, mac address doesn't change from one distribution to another
    but you can check your mac address by using "ifconfig"
    also verify if dns (/etc/resolv.conf) and route are well defined
    resolv.conf has
    # Generated by dhcpcd for interface eth0
    search rhk.dk
    nameserver 172.20.0.42
    nameserver 195.184.96.2
    rhk.dk is our intranet. I don't know if those numbers mean anything's out of place.

  • Cannot get Desktop Manager 4.7 to connect to Storm

    I have looked at the similar post at this location,
    [url]http://supportforums.blackberry.com/rim/board/mess​age?[/url]
    and used its trick of connecting the Blackberry Storm *before* starting Desktop Manager 4.7.  I enter my password, then turn on DM and I get a question of whether to use an old profile, so I say "cancel," i.e. no profile.  It then freezes up, with a terminal and a Blackberry appearing on my Blackberry screen, and "working" on my Blackberry icon on my PC (Windows XP operating system), and the manager menu grayed out.
    This Blackberry is for work and as such is set to be connected to its Enterprise server, and I am doing the Desktop Manager operation on my own PC (not the enterprise server).
    I do this because I wish to transfer the rather comprehensive Outlook contact list from this Blackberry Storm to a second Blackberry Storm that is my personal one, which IS hooked up for my PC being its server, rather than the one at work. 
    Maybe there is another way to transfer files, e.g., with a USB drive?
    Thank you for any advice you can give.

    do I understand your need ?
    you have one device that is linked to Exchange with BES. It works perfectly, and especially the contacts are synchronized in real time without requiring the Desktop Manager.
    you have another device, and you want to synchronize some of the contacts that are in Outlook to your personal device.
    If I were you, I would uninstall the Desktop Manager, and install it again, and only connect the personal device (at some point you have to say "I am using BIS").
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Maybe you are looking for