Cannot get OS onto SATA drive

I followed the "HOW TO install RAID/ AHCI 975x PUE Driver Guide" guide above, but still am having no luck. I downloaded and ran the Intel F6 floppy disk utility, made a floppy, ran F6 on install to load the drivers, but upon the 1st reboot, the XP Pro disk starts again and the install starts all over again. If I change the boot order so the hard drive boots 1st, I get a disk read error. My board is a P965 Neo and the drive is a Seagate SATA Barracuda. I have the latest BIOS installed (1.10). I tried to install the Intel(R) Matrix Storage Manager, but it said my system did not meet the requirements. My proc is Core 2 duo 6300 Conroe.
Please help!
Thanks.

Quote
Drive is on the an Intel SATA port, not JMicron.
OK. Does the drive show up in BIOS?
Quote
JMicron controller is set to IDE. (I actually tried it both ways, neither worked)
OK, keep it set to IDE mode.
Quote
OS I'm trying to install onto SATA drive is XP Pro full install with SP2.
OK, SP2 is a must.
Quote
I don't know what you mean by "integrate drivers". Are you referring to the F6 option during install? Regardless, you're saying it's unnecessary.
Yes, I am referring to the F6-Floppy procedure at the beginning of the setup. There are no special SATA drivers for Intel ICH8 anyway.
Quote
I tried to install the Intel(R) Matrix Storage Manager, but it said my system did not meet the requirements.
The Matrix Storage manager does not Support ICH8 chipset.
Quote
Sounds like I have Neo-f and that it's irrelevant.
Yes, it has  nothing to do with your problem.
/Edit:
So the XP Setup is detecting your drive.  Maybe integrating the drivers is the cause of your problems.
/Edit2:
The Driver package that you have on your floppy disk contains quite a few drivers for different chipsets.  Which one did you select?  Forcing Windows Setup to use the wrong driver, may cause a corrupt installation.

Similar Messages

  • I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine.  How do I get the network back?  It shows in my list of networks but when I use the password and try to join it says not connected.

    See if the iPad will accept the password after you restart it. It's worth a try.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You could also try a reset as well.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • Downloaded TV Programme: Cannot get them onto iPad

    I've downloaded a programme series, consisting of 6 episodes.  They all show in the TV Programmes section of the iTunes Library, but I cannot get them onto my iPad.  I've tried syncing the iPad.  I've tried switching it off, then back on.  Nothing.  No matter what I try, I can't get them onto my iPad.
    What's up?
    Duncs

    You are selecting them with checkmarks in the boxes next to their names in the list of TV Shows in iTunes before you sync? The Sync TV Shows heading is selected as well?

  • How do i play an audiobook i purchased from itunes on my computer? i cannot get it onto my ipod, how do i play an audiobook i purchased from itunes on my computer? i cannot get it onto my ipod

    I purchased an audiobook from itunes and  i see it in my library but cannot get it onto my ipod nor am i able to listen to it on the computer...any suggestions? obviously i'm a new ipod user lol

    What happens when you try to play it in your iTunes library? Does it appear under the audibooks section?
    Is your iPod configured to sync audiobooks from under its Audiobooks configuration tab?  To find this tab, plug your iPod in and click on it under the Devices section in the left hand pane of iTunes.  This should bring you to the Summary tab.  From there, look for the Audibooks tab and make the appropriate configurations to get it over to your iPod.
    B-rock

  • Cannot get brand new hard drive to work. Disk utility states operation not supported when I try to erase or partition?

    Without any success, I cannot get my hard drive to work in disk utilities. I am able to see the disk in the upper left hand column, but when trying to initiliaze the software always reads operation not supported. Any ideas?

    You probably have too new a hard disk.  Contact the hard disk manufacturer and ask what jumper setting is needed to drop to 1.5 Gbps SATA speed.
    Either that, or return the disk, and go to http://www.macsales.com/
    They can be sure to equip you with a proper hard disk.
    Note formatting is key as well:
    http://discussions.apple.com/docs/DOC-3003

  • I have an MP4 home vid in itunes.  I cannot get it onto my ipad. I tried "create new version" to make it into a format suitable for ipad, but the options were greyed out.  Any help appreciated.

    I have created a home video, using my Panasonic Camera, and a high definition SD card.  It is now on my computer as anMTS file, which I converted into an MP4 as well.
    But I cannot get this file onto my ipad.  I have tried countless ways.  I finally today thought I had the answer..........the MP4 file is now in Itunes (I hate itunes, it is so user-unfriendly) and I read that I need to click on it, go to "create new version" and select the ipad version.  But those options were greyed out.  !!!  Aaargh!  Frustration!  Any help gratefully recieved.

    You can try and import your MP4 using free OPlayer HD Lite via File Sharing.
    https://itunes.apple.com/sg/app/oplayerhd-lite-best-free-video/id385896088?mt=8

  • I purchased a calendar app and downloaded to my computer but cannot get it onto my iphone 4

    New to Iphone. Just purchased a calendar app and downloaded to my computer but cannot find how to get it onto my iphone. It is not showing up on the APP store in my phone under purchases.

    Dana -
    You can connect the iPhone to any computer to charge it. Just be careful when doing so if the computer has iTunes installed. iTunes may pop up and ask if you want to sync the phone with the computer, which you won't want to do if the computer isn't yours! 
    Good to hear you got things sorted
    Enjoy the rest of your weekend.
    ~Lyssa

  • Cannot get logged onto wifi in house

    cannot get onto wifi in house just got new ipad ?

    If you would like to try Live Chat they should be able to help you.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Can't load XP onto SATA drive

    I have a problem with a new system I am putting together.  The MB and HD are new and I do not suspect either of them to be the problem.  I formated the HD with Maxtor's program and it seems to go fine.  I can load the 6 floppies and start the CD for XP.  The HD appears in the boot sequence.  I can not find anything in the BIOS that suggests it supports SATA, even though I looked everywere.  When I try to load XP it goes OK until it asks where you want to do the installation and at that point it suggests there is no HD.  This is the only HD in the system.  Any suggestions would be appreciated because MSI support is closed for the weekend and I want to work on this over the weekend.
    MSI motherboard 661FM3-V
    PHOENIX AWARDBIOS 6.00PG
    CELERON D 351 3.2 GHZ
    MAXTOR SATA HD 80 GB, 6Y080M0
    WINDOWS XP PRO
    PS IS 400 WATT
    RAM IS ULTRA 512 MB X 2

    Quote from: bear47 on 03-December-06, 22:44:25
    Tried another SATA disk and it does not show in My Computer or Windows Explorer either.  I know the new disk is good because I took it out of another working computer.  One thing though, I did not install any of the critical updates, so I assume it does not even have SP1, does that matter?
    Back to the BIOS question.  One of the above replies suggested making some changes to the BIOS and those options are not there.  I tried the key combinations and they did not bring up new menu options either.  How much effect does the BIOS have on the SATA drive?  Does it need the update to make it SATA compatable as far as the options?  Sorry to be such a bother, but this is my first experience using the SATA that gave me a problem.  I put togther a system for my wife and used a SATA drive and everything was seamless. 
    ensure you have running XP with SP2. and sis chipset drivers are installed.
    "Back to the BIOS question.  One of the above replies suggested making some changes to the BIOS and those options are not there.  I tried the key combinations and they did not bring up new menu options either.  How much effect does the BIOS have on the SATA drive?  Does it need the update to make it SATA compatable as far as the options?  Sorry to be such a bother, but this is my first experience using the SATA that gave me a problem.  I put togther a system for my wife and used a SATA drive and everything was seamless.  "
    yes they can be crucial.

  • Although I purchased an audiobook directly from iTunes I cannot get it onto my 4th gen. shuffle. Any advice?

    I just purchased an audiobook  from itunes and I cannot get it on my ipod shuffle 4th gen.  I can get music on it just fine and i have the newest versions of my ipod's software and of itunes.  Any help is appreciated.

    Thank you for the advice.  I attempted this but found that when i selected my ipod from the device list i only had the option to autofill from a certain tab. I tried to use the recently  added tab which contained exactly the audiobook and songs i wanted but the shuffle would not accept the audiobook.  The itunes warning message claims i am unauthorized for the audiobook on my computer, however, i am signed into my own computer and itunes accounts (on which i purchased the audiobook)...

  • Cannot get videos onto 60GB Ipod

    Simple question, how do I get videos over to my 60GB Ipod? Very simply Itunes does not let me drag videos onto my ipod device, where it's listed on the left side. The videos are converted and in the proper format for the Ipod.
    I got it to work once, but I cannot seem to get it to work anymore.
    Just got it today, this thing really does not play well with my PC as I've had many problems updating it right out of the box.

    I was having trouble adding some videos to my ipod, and they were ones with really long titles and/or other characters in the title.
    When I shortened the title, for some reason, they went on right away.
    Don't ask me why, I found this out by accident.
    Worth a try, right?

  • I imported my songs from cds and i cannot get them onto my ipod

    i got an ipod fo r my brithday, last june! well i have been trying for months to get my songs imported from cds onto my ipod. The thing is i read all of your stuff but things are not happening. Like you guys said "once you plug in your ipod the itunes thing sould pop up" that did not happen. And also there is not a little ipod onn the left hand side next with the libary, podcast, ect. And aslo i try to update my ipod by the file menu and that is not avalible. And also under edit it staes that there is no ipod detected, when there really is! I really need your help.
    Thanks for understanding.

    First of all, you are not talking to anyone from Apple here, this is user to user forum.
    Second, if you are having problems getting the iPod recognized, start with these troubleshooting articles.
    Your Windows PC doesn't recognize iPod.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.
    Try to restore it in disk mode.
    Putting iPod into disk mode.

  • Cannot get past "Prepare Hard Drive(s)"

    I'm installing from the 2010.05-core 64 bit iso into a VirtualBox guest.
    All went fine when I partitioned the disk with the Auto-Prepare option. However, I didn't like those partitions, so I created a whole new disk and started again.
    I then prepared the partition using the manual option. That seemed to go OK. I created all the partitions, wrote them to disk, and quit.
    When I got back to the main menu, "Select Source" was highlighted. I tried to move on to "Select Packages", but I got a message that told me I had to do prepare the hard drive first.
    When I went into the Prepare-Drive option, I found that my partitions were all there, and it all looked fine.
    But no matter what I did, I couldn't get into the "Select Packages" option. It kept telling me that I had to prepare the drive, even though I had.
    I thought of modifying the setup script, but it's not so straight-forward.
    What's going on? Can I fix this?

    oksofar wrote:
    No I didn't (blush).
    thanks for the quick response.
    No problem, glad I could help! 
    Please remember to mark your topic as solved. 

  • Cannot get music onto Ipod(1.2)

    well i got a new ipod on warranty and updated it to version 1.2 and Itunes to version 7... anyway... it wont let me manually put music onto the ipod! i drag the music and it says updating while the songs go though.. and i can see the memory used going down... once its finished the used goes back to what it was before!! what the ****! its doing the same on my bro's ipod as well.. he jsut installed to version 2 as well!! can anybody help?

    and i can see the memory used going down... once its finished the used goes back to what it was before!!
    if that's happening to both ipods on the same computer, we'd better check on the possibility from this document:
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • Qosmio F20-111and Windows Vista - cannot get sound and display driver to work

    Dears
    I have just installed windows vista home premium 32 bit, but I faced 2 main problems which are:
    1- The sound:
    2- The graphics card GO 6600 128 MB
    I found the driver for them but it did not work so I need you help please.
    Regard

    Hi
    Unfortunately I do not have Qosmio G20 but if you use search option on this forum you can find interesting topics about Vista on Qosmio F20.
    For sound check http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24004
    Display maybe this will help http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21823&messageID=80423
    Be sure the BIOS is updated with latest version.
    Bye and good luck!

Maybe you are looking for

  • Impact of SAP ECC 6.0 in BI 7.0

    Hi all, can any one know what type of impact of SAP ECC 6.0 on BI 7.0. if ECC 6.0 as source system for BI? kindly provide more info on it thanks

  • Load Balancing on ACE Modules

    hi, Is it possible to load balance VIP hits on two ACE Modules in an active/active configuration. Or is it that only per FT group only single context could be active. Regards.

  • PDF form - Displaying entered data in another field

    Hi, I'm hoping someone will be able to help me with this. I'm trying to create a PDF form containing a business card graphic/template with fields that'll update as the user enters his/her data. I wish to use an existing graphic with added fields whic

  • Problem using CLOB in JDBC (NewLOBAPISample)

    I've just tried to run the JDBC NewLOBAPISample, and everything works fine until I try to insert or update on the CLOB column using any characters other than base ASCII. For example, if I attempt to insert the String "$100", it works just fine, but "

  • Pass value to function

    Hello, I have a function that filters a list of properties by neighborhood. It works fine from a static form button on Spry data in a master/detail form. It refreshes the master list. var neighborhood = function(dataSet, row,  rowNumber) if (row["NEI