Cannot get out of standby - P35 Platinum
Hello everyone,
I recently build myself a new rig, featuring a nice and shiny new P35 Platinum board. Here are the system specs:
MSI P35 Platinum - BIOS version 1.4
OCZ GameXStream SLI/Active 600W
Intel Core 2 Duo E6600 2.4Ghz overclocked to 2.88 (FSB 320)
2x 1GB 1066Mhz PC-8500 Kingston HyperX RAM (5-5-5-15) no overclock there
2x Seagate Barracuda 320GB in RAID 0
Sapphire Radeon HD2900XT, 512M etc etc
Some IDE NEC DVD+/-RW Drive
Here comes the problem. I put my system on standby, and down it went. I restarted it once, booted into Windows Vista Home Premium, 32bit without a problem. Then I turned it off again and went away for a few hours. I came back, started the machine and... nothing. At least not on the screen: it tells me that it's not receiving a signal. All the fans are spinning, and I hear a normal, single post beeb. I opened the case, and saw led3 was constantly shining. I don't know if this was the case before the problem turned up, I never bothered to look at it. The status leds on the board have shown me varying stuff, I got all greens once, and I believe it booted to windows on that occasion. I also got it green-red-red-green once, but that pattern didn't come back. I tried to clear cmos with the button, system powered down etc etc (which didn't help), and now I'm getting green-green-red-green (searching for a floppy drive), and it's not booting to windows anymore. Which seems logical after clearing cmos, because in standard bios settings, the Intel RAID controller is disabled, so it can't find Windows anymore And now the big question... how on earth can I reset the board so that it doesn't think its standby anymore, without any display support? It seems unlikely there's a defect in the graphics card or the psu doesn't supply enough juice; the rig ran just fine the other day (also on heavy gaming/video processing).
Please help me out, o great MSI forum experts
Juul
It's really strange. On one hand, the status leds indicate the system boots normally, it even booted into Vista once (heard the vista starting sound), but on the other hand, there's NOTHING on the display. Everything seems to work just fine, except for the fact that I'm not seeing anything before the problem arose, I booted several times with the memory installed. I experienced absolutely no problems at all. I also tried to boot with only one stick, didn't solve the problem. But I will try it with a 6400 stick. I just wish I'd never ever put the stupid thing on standby. I'm thinking of an S1 / S3 problem myself. Is it possible the videocard still thinks the entire system is on S3 standby and therefore refuses to output anything to the screen? I didn't adjust any of the settings in the power management section of the bios when I still had visual access to it, by the way.
Similar Messages
-
please help - installed IOS7 and now I am having problems playing Words Free on my Iphone. It gives me a pop up telling me to connect to ITunes but will not connect. Cannot get out and have to continually shut down my phone and start over.
Hi, jeantwin.
Thank you for visiting Apple Support Communities.
The steps in the article below may help you resolve the issue with push notifications.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
If the issue persists, try signing out of your Apple ID and then sign back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
Cheers,
Jason H. -
Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out
I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik -
HT1338 error in download, OS X 10.8.3 now checking for updates for 14 hours cannot get out of it!!!
Error with downloading upgrade OS X 10.8.3 now checking for updates for 14 hours cannot get out to start again!!!
Quit the App Store application, or force-quit if necessary.
-
Whenever I switch on my iPad Air, I am presented with a full screen piture of a blue sky, stars and white clouds, which I cannot get out of. How do I do so, please?
Sorry, please ignore this question. I have just realised that the answer is the same as the one I recieved to a previous similar one.
-
Cannot get out of full-screen view of main window of Mail.
I went into full-screen with the main window of Mail, and now cannot get out of it, even when quitting and relaunching. Exiting full screen only shows separate window for the highlighted email. How can I reverse this?
Push your mouse cursor to the top until the menu drops down. At the far right corner is the leave full screen icon. Select it.
-
I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?
Which magnifier tool are you referring to? If you double-tap with 3 fingers it should disable zoom. Then you can go into Setttings>Accessibility>Zoom and turn it off.
-
I have a frozen email which i cannot get out of
ii have a frozen mail i am composing and i cannot get out of it and back to my inbox - help!
Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.
-
Cannot get out of ibooks store
I updated to iOS 8.0.2 on my ipad and now I have lost the icons at the top and bottom in ibooks. I went into the store and now I cannot get out. All I can do is search. Help.
If you aren't getting the tabs along the bottom of the iBooks app (My Books , Featured , Top Charts , Top Authors , Purchased) then try closing the app via the iPad's taskbar and see if they show when you re-open the app : iOS: Force an app to close
-
TS4062 my phone has frozen on a screen to sync and I cannot get out
Help, cannot use my phone because it's frozen on a screen to sync and I cannot get out. Cannot even turn it off
it says "iCloud Backup - Backups happen when this iPhone is plugged in, locked and connected to Wi-Fi". Was trying to go into settings to turn back on wifi and it wouldn't let me get past this screen
-
I cannot get out of the French ITunes Store to get to the USA store. I did find the US flag on my IPad in I tunes at bottom of music page and switched to US flag !) but when I go back to trying to update my Apps I still get: you are in the French Store!! Aquavero
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
Settings > iTunes & App Stores > Apple ID: > View Apple ID > Country/Region = Change Country / Region -
I am stuck in the big screen and cannot get out.
I hover the mouse at the top but the menu will not appear. The only way to solve this is turn off the computer. Surely there is a better way. What am I doing wrong?
I hover the mouse at the top
The top of what?
but the menu will not appear
What menu?
The only way to solve this is turn off the computer
Solve what? What iMac do you have have? What operating system?
What EXACTLY is the problem you are having?
I am stuck in the big screen and cannot get out.
Are you simply trying to reduce the size of the window? Justy click the green button. -
I accidentally clicked restart with windows vista. now i cannot get out of the installation page and no matter what i try i cannot get it to start up with macintosh. i cannot ejet the disc either.
i was going to say the exact same thing as jerry. You can also eject the disk in that mode if you want. It also works if you hold down the option key before you turn it on- just so you dont miss the moment. What I say to do is power off, hold down the option key, while holding it down, power on. When a menu pops up, you can let go of the button. Once in the mode, select with the mouse your mac os hard drive/ boobable and then click enter or click the arrow on it. Then your fine!
-
Cannot come out of standby w/ wireless keyboard mouse (usb)
For some reason I cannot get my mega 180 to respond to keyboard or mouse activity when in standby (wireless mouse/keyboard via usb). In ther device manager, the options to "allow this device to bring comp out of standby" is grayed out. Any ideas?
Something else I have noticed that might jog someone's brain: I have a touchscreen monitor that connects via a 9 pin adapter (it is made for a serial port) to a usb port. When I bring the computer out of standby by pressing the power button, I lose the touchscreen function, and can only get it back with a reboot.
tiabios settings
you want s3 bios to turn the most devices off.
probable need to turn apm to disable,
and then enable some sort of wakeup ...kbc (keyboard comand,...wake on usb or something like that.
that worked for my msi board..yours should be similar -
MacBook Pro (Late) 2008 running 10.8.4
I was using my computer every morning as I do everyday with no issues. I had left home for most of the day. Closed lid and while I was gone for a couple of hours. I returned home, opened my MacBook and nothing but a black screen. I've tried many things all evening try and fix this problem out of "safety sleep mode, and other similiar tricks that other people had tried.
I still have a Black Screen and cannot get my macbook out of what seems to be the sleep mode.
I've done a master reset and after I restart, I do get the power up chime but still a black screen. I don't know what else to do. Please help. Should I bring computer to a local repair shop or is there something I can do to fix myself. I just don't know where to start.
Thank you.
SusanGenius reservation http://www.apple.com/retail/geniusbar/
on-line https://getsupport.apple.com/GetproductgroupList.action
check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
Maybe you are looking for
-
EssbaseException: Accounts 1060000
Hi everyone! I'm having troubles with my application in Hyperion Planning 11.1.1.3; It is an application with 3 cubes (BSO). Yesterday at night, some users created new members for a sparce dimension in production environment. After this, an applicati
-
This is the last error summary I received: Process: com.apple.WebKit.WebContent [965] Path: /System/Library/PrivateFrameworks/WebKit2.framework/Versions/A/XPCServices/com. apple.WebKit.WebContent.xpc/Contents/MacOS/com.apple.WebKit
-
We just implemented ISE 802.1x in couple of our Cisco 4507 switches and we are seeing the following error in the log. %HA_EM-3-LOG: NAC-RADIUS-FAIL-OPEN-DEAD: All RADIUS servers are dead changing the nac-enforcement ACL to permit all I paste it in
-
Will Labview 5.1 run on Windows XP or 2000?
I am currently in process of upgrading my workstation from Windows NT to either Window XP or 2000. I'm currently working in Labview 7 but I have a lot of vi's that were written in Labview 5.1 running under NT that still require some support and I'd l
-
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!