Cannot get past diagnostics screen after updating ios 5.1.1

I just updated my iPhone to the new ios 5.1.1. After the phone restarted the first screen to come up was regarding wi-fi. Chose my network and moved on. Next screen was strictly policy. Accepted it and moved on. Next is the diagnostics screen in which you can choose for apple to send you daily diagnostic and usage data. Regardless of what I've chosen (automatically send or don't send), I hit "next" and the phone doesn't load past this screen. I've turned the phone off/on, etc. Anyone know what's up??? please please help

If you cannot get the iPad to respond in any other way, you may need to restore the device.
Connect the iPad to your PC and launch iTunes. Select the device on the left side and then click on the Restore button in the summary pane of iTunes.
But Read this about restoring your iPad before you proceed.
http://support.apple.com/kb/HT1414
If that will not work, you may need to use recovery mode. Read about that here.
http://support.apple.com/kb/ht4097

Similar Messages

  • Can't get past grey screen after update! Losing hope...

    I've spent over a week trying to figure this out and about to give up... hoping that someone will reach out and try to help me resolve this. I'm seeing a lot of people with this problem, most go unsolved.
    Downloaded and installed Mavericks from Mountain Lion on a Macbook Air 2012. After restart I get a grey screen (goes a little darker after a few seconds) with the Apple logo and nothing else. I can move the mouse though.
    I've tried safe mode but the progress bar only goes 3/4 and then disappears and the grey screen and logo are all that remains.
    Tried clearing PRAM and downloaded and installed at least 3 times now. Last time it stayed on saying that there was less than 1 minute left for over 10 minutes. Finally restarted... and brought  up the grey screen with the logo and here it is 45 min later!
    Ran the disk utility on the Mavericks drive... it showed that the Mavericks drive had no repairs needed and all permissions are in order.
    I do not have a backup or time capsule, so I'd really like to try to not do a clean install.
    Really hope some good hearted Appleton will help me so I can be all happy with my Mac again!

    Before proceeding further you should secure your data.  You are close to losing it and the instructions below will make a copy of it without having to boot the operating system.  The good news is it appears your system disk is reasonably healthy so this procedure should work.  You will need an external drive which you will erase as part of this procedure.
    Boot the recovery partition:
              • Press the power button and as you hear the bong,
              hold down the Command and R keys.
              Once booted, click on Disk Utility.
    Format (and erase) the destination recovery disk:
              Plug in the drive you are about to erase.
              Select the volume that is NOT your system disk.
              Click on Partition.
              Pull down under Partition Layout to 1 Partition.
              Click on Options…
              Select GUID Partition Table.
              Name: Emergency Backup
              Format: Select Mac OS Extended (journaled)
              Click Apply.
              Click Partition.
    Make a copy of your system disk on the recovery disk:
              Drag and drop the named system disk to Source (often called Macintosh HD):
              Drag an drop Emergency Backup to Destination:
              (Do not reverse these.)
              Click Restore (the lower Restore button).
              Be patient for it to do a full backup of your system disk.
    Then try reinstalling Mavericks from the Recovery partition.

  • Hi, may i know how can i get all data back after update ios 6

    Hi,
    May i know how can i get all data back after update ios 6 and all my data lost ?

    You can restore the phone and when prompted to restore choose from icloud account. BUT MAKE SURE there is 1.) an icloud backup for your phone. 2.) you are using the same apple id.
    apl

  • HT4623 i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    Restore the device.

  • I cannot open Apple TV, and cannot get past "Airplay" screen.

    I cannot get past "Airplay" screen in trying to open Apple TV for TV screen use.  Have tried to re-boot but no result.  Cannot get to Settings as cannot get past "Airplay"; nor can I click #1 Network Configuration or #2 Choose This Apple TV.  Thanks.

    Hi! This seems to bee a common problem (i. e. https://discussions.apple.com/thread/4094417?tstart=0) and i have it as well. As usual you can't get help here but a lot of inspiration
    I recommend to upgrade the firmware using a LAN-connection and try it again. If it's stable keep it that way, if not return it to the store and get a new one.
    Before of course make sure there is none of the following settings in your router:
    - MAC Adress based filtering allowing only specific clients to connect (unlikely)
    - no hidden SSID (wifi's name) (unlikely)
    - DHCP turned on. If not, your ATV has to have a fixed IP Adress (unlikely)
    - Password and Encryption mechanism is correct
    It's 90% the devices fault in my opinion.

  • Ipad screen unresponsive.cannot get past trust screen to access computer reset

    Ipad mini screen unresponive. soft boot makes no difference. trying to access itunes to reset ipad but cannot get past the trust message request. using the imac that normally syncs with the ipad. any ideas

    Hi gav55,
    Thanks for visiting Apple Support Communities.
    It sounds like you want to use your iMac to restore your iPad, but the iPad is unresponsive.
    If you have restarted the iPad but the behavior continues, try to reset it next:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If the touchscreen is completely unresponsive, the advice in this article may also be helpful:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    If the iPad continues to be unresponsive, you may need to place the device in recovery mode before restoring it:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    All the best,
    Jeremy

  • Computer won't get past OS screen after unlock, even if I am still using 2 cores

    >Phenom II x2 555 BE
    >MSI 870a-g54
    So I decided to unlock my CPU and have been experiencing a problem. I recently found out that if I even have "unlock core" function enabled in BIOS, even while running it with two cores, the computer won't get past the windows screen. With four cores enabled it obviously does the same. No matter what I try I cannot get past the Windows screen while having the unlock core function enabled.
    My BIOS isn't on the latest version. I tried flashing it but I couldn't start it up even after flashed, it gave me the same problem described above. I reflashed it to the version I'm on now and it works, but I still can't unlock. What gives?
    Any help would be appreciated.
    TL;DR: PC will run as Phenom ii X2 555, but not as Phenom ii x4 B55. Can't get past windows screen.

    you need to provide more vcore to the cpu
    first try to enable 1 core (core number 3) (disable core number 2 and 4) and increase some vcore. If booted then you have a good core.
    Then try this with other core (core number 4) (disable core number 2 and 3), if booted then your both cores are unlockable and are good core (i.e, not defective)
    then you can try all cores at same time with some voltage increase (vcore)

  • I cannot power charge for iP4s after update iOs 8

    I have used iPhone 4s 16GB after I update iOs7 I cannot charge  battery.
    I cannot charge power when iP running , I have to close iP then plug adapter ,the power in.
    The staff of iStudio recommend me to update iOs 8  but I cannot charge iP by adapter after update iOs8.
    Now I can charge by USB via my computer but iTune cannot connect with my device.
    Could you have any recommendation?

    Same here. Issue is on both Apple TV's and iphone. Resetting everything did not fix the issue. Rebooting modem did not fix the issue. PLEASE FIX NOW. Take the thousands of dollars I've spent on movies, music & hardware and at least update the services page to accurately show that iTunes Store is indeed having issues! Thanks!

  • Cannot get past hp screen

    Have HP Pavilion S3700y about 2 yrs old.  Was shut down correctly last night, went to sign onto the computer and cannot get past the HP Invert screen.  Rebooted and pressed F8, nothing,Rebooted and tried F10 for Bios... nothing... just the HP screen.  Ideas?
    thanks in advance
    Scott

    We have had a number of demo devices that have been sold by some stores and these will not set up a HP webOS account due to the serial number. I was checking to see if you had one of these devices; but you serial number is for a 32G consumer device and should set up properly.
    The webOS doctor does wipe the partition that the ROM is on, but not the partition that any data is stored. Was this device new in a sealed box, or an open box?
    You could try a full erase by holding the power button, the volume down button, and the center button simultaneously for 5 seconds. This should initiate a full erase of this device.

  • Cannot get past login screen

    I cannot get past the login screen. I ran the disk utility to verify/repair my hard drive. The tool fixed a minor sequencing issue which resulted in a "The volume Macintosh HD appears to be ok. That did not fix the problem. Next, I tried booting in safe mode. I cannot. I'm thinking my next step is to reinstall the OS X from the Mac Utilities Suite. My fear is that it is going to erase my Hard Drive. True? Will performing this function erase my locally stored data (files, photos contained with iPhoto)?

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204

  • Ix2 fails to respond, cannot get past login screen

    I am having intermittent problems with my Iomega ix2 failing to respond. After some time being on the drive fails to respond. I cannot open any files through Windows explorer. If i attempt to connect using the web interface i cant get past the login screen. I put in my user name and password and hit enter. The page simply reloads the login screen. The only solution is to power the drive down using the button on the back of the unit. Powering it up it works fine. Eventually though this will happen again. It's happened a half dozen time or more in the last few days. Now I'm stuck out in the field and cannot access any files. Please help.

    No. No errors in the event log of any kind other than the time sync error. I recently replaced one of the disks as it had failed. I receieved a warranty disk from Lenovo/Iomega about a month ago. i installed it and it rebuilt the RAID with no problems. This error has been happening since then. When the time sync error happens i get all kinds of strange behavior. SFTP, which is how I access the files, will start giving Goodsync 'cannt reach end of file error' type errors. Like I've mentioned before I also get an issue where the web login screen gets caught in a loop too. I type in the user name and the password, hit enter, and it just reloads the login screen again. Rebooting the device from the power button on the back is the only solution.

  • Installed Windows 10 but forgot Windows password,cannot get past login screen

    Installed Windows 10 ,but I forgot my password for Microsoft. Cannot get pass log in screen.

    Hi, HP doesn’t have an official presence on this forum other than for administration and moderation. The assistance that you receive is mainly from volunteers. Use your password reset disk if your have it. We can't verify that you are the rightful owner of the PC.  Contact Microsoft.

  • Cant get past the login after update fail? (OSX 10.8.3)

    Hi!
    I have a big problem! This morning i tried to update my mac to the lastest version (10.8.3). Somthing made it to fail and i hade to reboot the system.
    Now the systems starts as before but when i type in my password and press enter, the screen flashes and i go back to the login again?
    I can start the system i Safe mode but not i normal mode.
    I have tried to repare the system with the disc tool but i still does not work.
    Any ideas?
    //VIktor
    Macbook pro mid 2009

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.  
    These steps are to be taken while booted in safe mode.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. 
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands. 
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply. 
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click the line of text below to select it:
    for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). Post the lines of output (if any) that appear below what you just entered. You can do that by copying and pasting as well. Omit the final line ending in “$”. No typing is involved in this step.
    Step 2 
    Repeat with this line:
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting. 
    Step 3
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null 
    Remember, steps 1-3 are all copy-and-paste — no typing. Also remember to post the output. 
    You can then quit Terminal.

  • Cannot get past startup screen

    My dad has the same MacBook pro as me but has been having some serious problems. It's running snow leopard but has recently not been sleeping, when the lid closes it seems to re start itself and cannot be shut down, only restarted.
    Then this weekend it fails to get pas the startup screen. The grey screen appears, a progress bar, as if it's updating goes about a tenth then stops, and after a while disappears, then the grey wheel just spins.
    I've searched for an answer have have tried the following
    Does not boot in safe mode
    Does not boot from disk
    Reset the pram
    Reset the SMC
    Booted in single user mode, and it says rebuilding catalog b tree, but cannot do it as erros on HD
    Not sure what else to try. Is there a way I can format the drive and reinstall osx? Not bothered about the data on the drive so long as I get it working again..
    PLEASE HELP
    cheers

    You need an appropriate OS installer disk to do what you want. If it won't boot from the OS installer disk then you can't do what you want. Bring it to an Apple store or AASP.

  • MBP running Mac OSX Leopard 10.5.8 cannot get past login screen even in safe boot

    Help!  I have a Macbook Pro purchased in 2009, running Mac OSX Leopard 10.5.8 which froze while running Adobe Illustrator.  On reboot, it won't allow me to go past the login screen.  I tried starting up from the disc, running disk verification and repair and repairing disk permissions, and trying to start up in safe boot, all to no avail.  When the login screen comes up it gives the name of my hard drive with a (2) after it, which seems strange.  Any suggestions short of reinstalling the system software?  I don't want to lose my applications/data!

    AnointedOne wrote:
    My 1 year old MBP running OSX has got more sluggish. The little multicolored spinning timer wheel keeps appearing a lot more now, and I hate it! My MBP takes drastically longer to boot when i turn it on as opposed to when I just got it. My web pages take a long time to load. Can anyone help me? WHat can I do to speed up my MBP. I am a novice mac user. Again my mac is getting slower by the day and i dont know how to increase its overall performance. Is there any simple software that can boost overall performance or will I have to reformat my MBP? I have a 200gb HD with 50 gb free and 4 gb of ram.
    Welcome to Apple's discussion groups.
    Launch the Activity Monitor utility. Pull down the list near the top and set it to "All Processes". Click on the "CPU" column heading to put the highest CPU consumers at the top. Also click on the "CPU" tab in the lower part of the window to check the value for "% Idle". If that value is much above zero, check the other categories for signs of resource problems. If nothing there points to a possible problem, launch the Console utility and look for messages that might suggest a problem. If you see messages that you have trouble interpreting, post them here and someone should be able to help.

Maybe you are looking for