Cannot get past screen 2 of 2 for iTunes Music Store purchase of music

I can't get help from Apple or ITunes or anyone - They sent me here.
I have tried to buy music at the ITunes store since Dec 20- No luck here's the story (email to iTunes were of NO HELP!! - Canned responses are useless)
1. Entered credit card information - screen returns and at the top in black lettering is says "If your address is not in the United States" Click here.
I am in the United States.
2. I called my credit card company and they indicated all my information I entered was correct. In fact they could see my attempts and they sent to Apple (I Tunes Store) authorizations three times within 3 minutes ($1). The times this was done - was everytime I clicked "done" on the Step 2 of 2 page.
3. I can't get a response from the ITunes store to allow me to buy music. I have purchased lots of stuff from the Apple store without any problems.(responses received, products received and confirmation of orders received)
4. Why can't I get past screen 2 of 2 - over five emails to the iTunes store were nonsense answers with no help. This is my last resort before I start returning all my iPOD equipment purchased within the last 30 days.
PowerBook G4   Mac OS X (10.4.3)  

I'm sorry I can't think of much - maybe try a different card or different name or just some different details?

Similar Messages

  • Cannot get past License agreement

    I cannot get past the license agreement page for my Ipod shuffle, I can download songs but I want to register and reset my Ipod, it appears that I cannot scroll right to click the next button..any ideas would be appreciated!

    If you aren't seeing all the buttons try increasing your screen resolution to at least 1024x768 so you can see the whole page, you'll find the instructions on this Microsoft page: Windows XP - Change your monitor resolution
    Click the little Agree box then the Continue button, (there's no need to save the agreement).

  • IMac G5 running OS 10.4.11. Started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup. I can get into safe mode. Tried install disc for disc utility and reloaded OS. Still get blue screen.

    I have an older iMac G5 running OS 10.4.11. The other day I started playing with a bluetooth speaker (may or may not be related). Now I cannot get past the blue screen on startup.
    I can get into safe mode. But no regular startup.
    I tried disabling bluetooth, thinking that might be related. It didn't help.
    I even tried using the install disc to run disc utility. That didn't work so I reloaded the OS.
    But I still get hung on the blue screen when trying a normal startup.
    All help would be appreciated.

    Try resetting the PMU/SMU and PRAM/NVRAM. You'd need to identify the mode of resetting depending on the model of your G5 iMac. The Apple support sites that would help you for this are –
    http://support.apple.com/kb/HT1436
    http://support.apple.com/kb/HT1939
    http://support.apple.com/kb/HT1767
    http://support.apple.com/kb/HT1379
    I hope this solves your problem.

  • HT4718 I cannot get past the restore screen

    So, big problem. I have had to replace my logic board. Following this, using Mountain Lion, my mac was unusable, just beach ball on every click. I did restore Mountain Lion, but no change. I cannot restore from time machine as I get an error message saying restart. Now, I cannot get past the restore screen, no matter what keys are held at startup. If I hold the option key at startup, I get the recovery disk and back up showing, neither of which can be used.
    In short, I'm stuck, any help appreciated!

    If you successfully restored the iPod to factory settings/new iPod (went through all the steps without errors), then time for an appointment a the Genius Bar of an Apple store.

  • Another iBook cannot get past the grey screen with spinning gear

    I have read the other posts on iBooks not starting up. I too have used Onyx recently but this was to cure the problem of a freeze. Now start up cannot get past the grey screen. PRAM has been zapped and safe mode will not work. Worse, the CD drive will take CDs so cannot go back to start up disk.
    Bizarrely, a visit to the Apple Store and the iBook started no problem. System was reinstalled using archive option and various health checks apparently showed no problems. But then got back home and again start up froze at grey screen with spinning gear. I have left it on this for over 15 minutes but to no avail. I have tried to connect to another ibook using T key to get target mode. I'm not sure if I am doing this right. I have started up working iBook plugged in the firewire to both machines and then started up ailing iBook holding down T key. 2nd iBook wont start at all.
    Any suggestions?

    An Archive and Install will preserve you user settings and data. You will need a minimum of 5 GB free on the hard drive to perform an A&I; you can reduce the space required by about 1 GB by selecting the option to install language support only for the language you use (assuming you don't need multiple languages).
    However, after seeing your other post (BTW, it'll be easier to keep track if relted issues are in the same thread), you do not want to try an A&I if Disk Utility is reporting anything about 'could not be repaired'. Doing so will would ensure problems down the road, if it worked at all. It's possible for one disk problem to mask another. Whenever Disk Utility (or any other repair utility) reports making repairs, it's good practice to repeat the repair until it reports no problems found or it becomes clear it cannot repair the disk.
    DiskWarrior has an excellent track record at repairing problems that Disk Utility cannot (especially Disk Utility versions prior to OS X 10.4.2).
    If the drive cannot be repaired, you may be able to keep it by doing an erase install with the write zeros (one pass) option. That will update the hard drive firmware record of bad disk sectors to avoid using. If there are only a few bad sectors, that may let you keep using the hard drive for several more years. An erase install will do just that to your data, through. If you have access to another Mac with either a large amount of free disk space of a DVD burner, you can try using the other Mac as host and the eMac as target in FireWire target disk mode. You can run the host's copy of Disk Utility on the eMac hard drive, and hopefully be able to mount the emac HD so that you can back up the data in your Home directory.

  • Cannot get past hp screen

    Have HP Pavilion S3700y about 2 yrs old.  Was shut down correctly last night, went to sign onto the computer and cannot get past the HP Invert screen.  Rebooted and pressed F8, nothing,Rebooted and tried F10 for Bios... nothing... just the HP screen.  Ideas?
    thanks in advance
    Scott

    We have had a number of demo devices that have been sold by some stores and these will not set up a HP webOS account due to the serial number. I was checking to see if you had one of these devices; but you serial number is for a 32G consumer device and should set up properly.
    The webOS doctor does wipe the partition that the ROM is on, but not the partition that any data is stored. Was this device new in a sealed box, or an open box?
    You could try a full erase by holding the power button, the volume down button, and the center button simultaneously for 5 seconds. This should initiate a full erase of this device.

  • I cannot open Apple TV, and cannot get past "Airplay" screen.

    I cannot get past "Airplay" screen in trying to open Apple TV for TV screen use.  Have tried to re-boot but no result.  Cannot get to Settings as cannot get past "Airplay"; nor can I click #1 Network Configuration or #2 Choose This Apple TV.  Thanks.

    Hi! This seems to bee a common problem (i. e. https://discussions.apple.com/thread/4094417?tstart=0) and i have it as well. As usual you can't get help here but a lot of inspiration
    I recommend to upgrade the firmware using a LAN-connection and try it again. If it's stable keep it that way, if not return it to the store and get a new one.
    Before of course make sure there is none of the following settings in your router:
    - MAC Adress based filtering allowing only specific clients to connect (unlikely)
    - no hidden SSID (wifi's name) (unlikely)
    - DHCP turned on. If not, your ATV has to have a fixed IP Adress (unlikely)
    - Password and Encryption mechanism is correct
    It's 90% the devices fault in my opinion.

  • Ipad screen unresponsive.cannot get past trust screen to access computer reset

    Ipad mini screen unresponive. soft boot makes no difference. trying to access itunes to reset ipad but cannot get past the trust message request. using the imac that normally syncs with the ipad. any ideas

    Hi gav55,
    Thanks for visiting Apple Support Communities.
    It sounds like you want to use your iMac to restore your iPad, but the iPad is unresponsive.
    If you have restarted the iPad but the behavior continues, try to reset it next:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If the touchscreen is completely unresponsive, the advice in this article may also be helpful:
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    If the iPad continues to be unresponsive, you may need to place the device in recovery mode before restoring it:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Recovery mode erases your device and restores it, which should resolve the issue. If you previously synced with iTunes or iCloud, you may be able to restore from your backup after recovery.
    All the best,
    Jeremy

  • I have a new Macbook pro, I cannot get past the country selection screen.  'Continue' is greyed out and keys just make error sounds. How do I move it on?

    I have a new Macbook pro, I cannot get past the country selection screen.  'Continue' is greyed out and keys just make error sounds. How do I move it on?

    sideeque wrote:
    I have the same problem. What did you do last time?
    What  should I do now? Its around 40 miles away the apple store? Would they pay my taxi fare to go and return?
    How can we trust this apple product?
    You are still under warranty.  Call Apple Care.

  • I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.

    I cannot get my screen reader to read my PDF format at all. I am using Window-Eyes 9.0 Screen Reading Program for the blind.
    HELP!!!

    For information regarding Accessibility, see here:
    http://www.oracle.com/us/corporate/accessibility/products/index.html
    You can also find additional configuration in the older Forms documentation, however most will still apply in newer versions although file version references and file locations may differer.
    http://docs.oracle.com/html/B10668_05/chap_forms.htm#g1095470

  • HT4623 i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    i cannot get past the screen that shows the itunes icon and the usb plug, and my computer wont see my phone

    Restore the device.

  • I cannot get past the password screen

    I cannot get past the password screen, I've tried resetting it but it tells. Me I'm not an allowed user

    If the old Macbook(?) has Snow Leopard 10.6 installed, and you have that retail install disc or the system disc of the current (base level) system on it, you could use the installer disc as a boot volume and use the utilities on the booted install disc to reset the password. It should be a menu option in the booted Install disc, way short of any effort to re-install anything. And if your computer can do this, the same DVD has Disk Utility, to check/repair the Mac HDD.
    What OS X version do you have, & what MacBook, etc is that?
    Good luck & happy computing!

  • HT1212 ipod restored to default but cannot get past pass code screen

    I followed the instructions and still cannot get past the passcode screen now what do I do?

    If you successfully (completed all steps without errors) restored to factory settings/new iPod and still have the problem that points to a hardware problem. I would make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I cannot get past the password screen on my old laptop - I'm entering the password I always used and it is not working

    I am trying to log on to an old laptop and I cannot get past the password screen - I'm using the password I always used and it is not working.  Even the clue doesn't help.  Is there anything I can do.  The last time it was turned on the apple staff transferred data to my new laptop.  Help

    If the old Macbook(?) has Snow Leopard 10.6 installed, and you have that retail install disc or the system disc of the current (base level) system on it, you could use the installer disc as a boot volume and use the utilities on the booted install disc to reset the password. It should be a menu option in the booted Install disc, way short of any effort to re-install anything. And if your computer can do this, the same DVD has Disk Utility, to check/repair the Mac HDD.
    What OS X version do you have, & what MacBook, etc is that?
    Good luck & happy computing!

  • We have loaded office for mac version 2008 on a macbook air, and it prompts to make an account, but then you click to register it recognises it as 2011 version and tells you there is no need to register. we cannot get past this point? anyone else?

    we have loaded office for mac version 2008 on a macbook air, and it prompts to make an account, but then you click to register it recognises it as 2011 version and tells you there is no need to register. we cannot get past this point? anyone else?

    Yes. The whole process of registering is messed up.
    No guarantee this will work, try unistalling and reinstalling. Uninstall has to be done the Microsoft way. Go to Applications / MO 2008 / Additonal Tools / Remove Office / Remove Office.
    Then reinstall the usual way. This might work.

Maybe you are looking for

  • How do I get time machine to see my Seagate external drive?  I

    I continue to have trouble getting the machine to ID an external drive for time machine.  I bought a new external, Seagate, installed it and things were fine, until I had to move my computer due to home repairs.  I ejected the Seagate as part of the

  • Disconnections and Speed Issues.

    To start off, our BT Internet connection has been fine for years, not a problem at all, speeds weren't high, but they were modest and certainly enough for my needs, and there weren't really any major problems, just the occasional maintenance work int

  • E-Rec Apply Directly link throwing an error from Int /Ext candidate st.page

    Hello, Iam working on a EREC implementation in an integrated scenario. The TREX installation has not been completed yet but i still wanted to check on the other links which does not use the TREX search engine. I created a requisition object and succe

  • Error/Application Logs

    I have a scenario in which I have to display error logs when exception occurs. There is a transaction SLG1 where you can see all the application log for a particular process. Has anyone worked on calling these types of transactions to display error o

  • Something wrong with my code

    there is no exception in compliation,but when i run it, there are a lot of exceptions like this: Compilation of '/opt/bea/user_projects/domains/mydomain/./myserver/.wlnotdelete/extract/myserver_PHSWeb_PHSWeb/jsp_servlet/__test.java' failed: /opt/bea/