Cannot get PB12.5 to work on Windows 7

Hi Folks:
     We are trying to migrate a 12.5 PB app from Win XP to Win 7. So far without success.
     The app resides on a UNIX server.
     The app works fine with XP and will work on Win7 if the user is an adminstrator.
     Setting up user machines with admin rights is unacceptable.
     We have tried to compile with "Embedded Manifest" As Invoker -- Without Success.
     We have looked for any places that wrote to the registry -- It only writes to CURRENT_USER which we believe should be OK wiith Win7
     The app does not appear to write to the "Program Files" directory.
     We changed the Win 7 machine to allow "Create Global Objects" which works but so far is not something that management here wants to do -- either by individual machine or identifying a group.
     The app runs against an Oracle 11g database and it stops when it tries to validate a user id because it appears that the transaction object(SQLCA) is not there.
Thanks for your help
Tom

Tom,
I'm guessing you looked at the following with regards to allowing "Create Global Objects" which works for you.
http://daverobertson63.wordpress.com/2007/10/18/sqlplus-windows-administator-only/
That may be your only way around this since the above posting mentions it's a windows security issue.
Ted Zimmerman

Similar Messages

I cannot get wireless mouse to work in windows 7 using bootcamp

I cannot get wireless mouse to work in windows 7 using bootcamp

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

Cannot get Remote Desktop to work on Windows 7

Ok. I am having issues trying to connect remotely using RDP. From what I know, the network was pre-configured from another IT group and was able to get it up and running. My company was commissioned to migrate his old PC (WINXP) to Windows 7. I have gone
through the steps of allowing remote desktop and following instructions:
To configure remote access, follow these steps:
1. In Control Panel, click System And Security, and then click System.
2. On the System page, click Remote Settings in the left pane. This opens the System Properties dialog box to the Remote tab.
3. To disable Remote Desktop, select Don’t Allow Connections To This Com¬puter, and then click OK.Skip the remaining steps.
4. To enable Remote Desktop, you have two options. You can:
Select Allow Connections From Computers Running Any Version Of Remote Desktop to allow connections from any version of Windows.
Select Allow Connections Only From Computers Running Remote Desktop With Network Level Authentication to allow connections only from Windows 7 or later computers (and computers with secure network authentication).
5. Click Select Users. This displays the Remote Desktop Users dialog box.
6. To grant Remote Desktop access to a user, click Add. This opens the Select Users dialog box. In the Select Users dialog box, click Locations to select the computer or domain in which the users you want to work with are located. Type the
name of a user you want to work with in the Enter The Object Names To Select field, and then click Check Names. If matches are found, select the account you want to use and then click OK. If no matches are found, update the name you entered and try searching
again. Repeat this step as necessary, and then click OK.
7. To revoke remote access permissions for a user account, select the account and then click Remove.
8. Click OK twice when you have finished.
One thing that I found odd when he launched Remote Desktop from his home laptop is the IP entry:
Computer> [Public Router IP]:49250
Login> Domain\Admin
Password> *****
From the odd port number I would assume that was for port forwarding so I logged into his router and found exactly that. In port forwarding, he had the in/out as 49250 TCP to 192.168.30. I went into the firewall and enabled Remote Desktop in the inbound
rules.
As of right now, I can use Remote Desktop to remote into the server, and withing their server, I cam use Remote Desktop to remote into the workstation. I just can't remote into the workstation directly using the port 49250. Any suggestions on this, something
I have missing?
He has Norton Security installed on this computer and I tried adding Inbound/Outbound rules to its 'Smart Firewall' to allow remote desktop and the port.

Thanks for the reply.
When I use Remote Desktop and use the Public IP of the router without the port number (49250), I am able to get into the server. However, when I try to use RDP with the [Public IP]:49250, it will not connect to the 192.168.0.30 workstation.
Right now the router is program to forward port 49250 requests to the 0.30 workstation.
I am going to work on the Inbound/Outbound Firewall settings today and see if this will resolve the issue.

Cannot get Magic Mouse to work in Windows 7 64-bit using Boot Camp

I recently purchased a Magic Mouse and installed it on the Mac OS X partition of my MacBook Pro. After successfully installing on the Mac side, I switched to Windows 7 Ultimate 64-bit using Boot Camp to install on the Windows partition. When I try to "Discover" a new Bluetooth device, the Magic Mouse does not show up in the list of devices (the mouse is powered on and next to the computer).
I am using the most recent version of Boot Camp (3.0.2) and have updated Windows 7. Has anyone else experienced this problem? If so, is there a fix for it?
I appreciate any help!

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7.

I cannot get Adobe ExportPDF to work. The screen is blank when I click on Select PDF files to Export. I use windows 7. I also tried to export a document directly from Adobe Reader using the tool, but it gave me an error message. Any suggestions?

Hi,
Try to use different browser.
Would it be possible for you to send me the document so that i can take a look at my end?
You can email me at:[email protected]
Regards,
Florence

I cannot seem to get Illustrator 10 to work on Windows 8. Is it too old or can I download a patch?

I cannot seem to get Illustrator 10 to work on Windows 8. Is it too old or can I download a patch?

No, the best you can do is explore the options at creative.adobe.com

Cannot get my "attach" to work on my email program. I press it but it is not allowing to open window to browsw files that I want to attach to email

Cannot get my "attach" to work on my email program. I press it but it is not allowing to open window to browsw files that I want to attach to email

Hello William,
Are you referring to Sony MiniDisc Recorder?
Locate the model # from the below link.
http://esupport.sony.com/US/p/support-info.pl?info_id=264
The MiniDisc Recorder is not compatible with Windows 7 Operating System (OS) as these devices were released prior to the release of Windows 7 OS.
If my post answers your question, please mark it as an "Accepted Solution."

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

Hi,
Which operating system are you running on?
Are you upgrading from a previous version of Photoshop elements or is this your first?
Are you trying to load the organizer or the editor or do both fail?
Brian

TS3989 Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Cannot get Photo Stream to sync on Windows 8.1. Shared streams work fine, but not personal stream. ANYONE please advise...

Videos in a shared Photo Stream can only be streamed, they cannot be downloaded.

I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??

Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times.

Cannot get exception-type to work

          WLS 60 SP1 (#101616)
          Cannot get <exception-type> to work. WLS shows standard “Internal error
          500” page instead of a custom error page. The custom error page is shown
          if <error-code> is used instead of <exception-type>.
          Any ideas? Thanks


Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot get iTunes DJ to work

No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
but there is no Source pop-up menu at the bottom of the iTunes window.
Any ideas?

Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
tell application "Finder"
set {d1, d2, d3, d4} to (get bounds of window of desktop)
end tell
tell application "iTunes"
set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
set bounds of window 1 to margins
end tell
If the iTunes window is running off the screen, that should restore it.
Hope this helps.

Cannot get wireless scanner to work

wireless printing to my HP Officejet Pro 8500 works fine but I cannot get the scanner to work - it fails to even communicate with the HP device. My operating system is Windows Vista. The error message I get when trying to use the scanner by clicking on the "HP Officejet Pro 8500 A910 Scan" icon is "Scanner communication cannot be established."
Thank you for your help
This question was solved.
View Solution.

Hi @utopian,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
Hope this guide helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot get screen sharing to work long distance...

I set up an AIM account for my mother-in-law so that I could remote screen-share her MacBook and help her with learning how to use it and trouble shoot it (it's a Late 2008 Aluminum MacBook hand-me-down from my wife).
I've set up the account, but cannot get remote screen sharing working. Screen sharing works fine over bonjour, but no go over the internet using AIM. I can control my wife's MBA from my iMac and vice-versa, but neither of us can control her MacBook. When we choose "Ask to share users screen...", we get the pop up window stating "Waiting for response from user", along with the spinning gear icon. If she chooses "Share my screen with...", the pop up window appears on our Macs and we're able to choose accept. But then the pop up window switches to "User would like you to share his or her screen" and just sits there. Nothing happens. On her screen, she gets the message "waiting for response from user" and nothing else happens.
After a long wait, my screen will say, "There was a communication error during your chat. Messages didn't receive a response from..." and gives me the option to report the details to Apple.
What am I doing wrong?
Her MacBook is running Mavericks, as are our machines.
Message was edited by: pmpknetr21
Message was edited by: pmpknetr21

Hi,
@mac.com and @me.com ID works as AIM Screen Names (you add them like they are and existing name) but only if you are using Messages 7 or 8 plus later versions of iChat 6 in Lion.
You should be able to use the Apple Issued IDs in Mavericks.
If you using an AIM Registered name try using it without the @AIM.com or @AOL.com suffix (User Name only)
As AIM can "read" the Apple Database it will think the Apple IDs exist already but may not tell you that is the reason you can't re-register them.
Can you post the info being sent to Apple here ?
However stop the log after about 10 lines of the Binary Images (I will not need it all).
9:28 pm Sunday; August 3, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

How to get Zen Touch to work on Windows Vista without PFS (worked!)

CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
)Uninstall every piece of Touch software you got and reboot.
2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
Best of luck. edit: Using Winamp to transfer files worked as well.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Cannot get PB12.5 to work on Windows 7

Similar Messages

Maybe you are looking for