Cannot get QuickTime to run after Installing latest update.

After going through install and final "FINISH" window appears and "OK'ed".
Try to launch QuickTime, get QuickTime Unavailable window with RED X, and message "QuickTime failed to initialise. Error # -2096, Please make sure QuickTime is properly installed on this computer."
Does anyone have an idea what could be the problem?

The following document is probably worth a shot with that one. (Make sure that none of the checkboxes are filled in the compatibility tab, not just the compatibility mode box itself.)
Error -2096 message when opening QuickTime for Windows in Compatibility Mode

Similar Messages

Cannot connect to iCloud server on iPad after installing latest update

I cannot access iCloud through iPad since installing latest update. Keep getting Accept the new terms etc" but can't do so through the setting s page

When I go to the settings page to access iCloud and click on terms and conditions it gives the message

After installing latest update the contact photos don't show on incoming call

After installing latest update the contact photos don't show on incoming call

Possible iTunes issue:
Try the following after adding photos.
Go to file
Then Home Sharing
Select photos to share
Click on All Photos already selected Do anyway
When Apply turns black click on Apply
Now go to Apple TV to see if photos there
Or restart iTunes.
Works for me every time photos do not appear on my Apple TV 3
Hopefully will work for you.

HT201412 None of my apps works after installing latest update.

After installing latest update on my iPad 2, none of my apps work. I click on the app, it flicks and goes back to home screen. Powering iPad off and restarting it did not work. Please help.

Did you update the apps? Check app store. Most of them had updates to support the iOS 5.1.1. It's been out a while

Saving Issues after installing latest update

Today, after installing an update to my Acrobat XI Standard, I am getting an error message when trying to save .pdfs from an email to my server. The error message is: The document could not be saved. There was a problem reading this document (21). Any way to fix this?

Hi JasBell,
Which server are you trying to save to?
What happens if you copy the document to the local computer first and then copy to the server?
Regards,
Rave

Error message after installing latest update

Since installing latest update 11.0.2.26, I am receiving error message: An unknown error occurred (-42110)
Itunes does work, however, when I close this message down.
Can anything be done? What does it mean? Am I better off just holding out until the next update and hope it fixes itself?

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

Cannot get Quicktime (OR Itunes) to install/work

I have had many headaches trying to get Quicktime to work over the past month. I have looked through the forums, uninstalled the program, as well as all the Apple stuff, using a program that would force the uninstall since windows could not do it. I cannot do a Windows restore because the restore point does not go back far enough... If I could just get quicktime to work, I would be happy since so many things require it. Here is what it tells me this time: "The configuration data for this product is corrupt. Contact your support personnel"
So... What options do I have other than formatting my dard drive. I would rather not do that...
Thanks,
-Brett

I tried installing an old version but it says that a newer version of quicktime is already installed.
Okay ... if there's no QuickTime showing in your "Uninstall a program" control panel, and you're getting that message, that usually indicates damage to the QuickTime.msi or related installation componentry.
Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try reinstalling iTunes again. Does the install go through properly this time? If so, are you able to launch iTunes without the error message?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

After installing latest update cannot access "messenger options" under the options tab

After installing Firefox latest update I cannot access "messenger options" under the options tab. The other tabs, themes and mail options work when clicked but nothing happens when I click "messenger options" It works fine in IE.

When I go to the settings page to access iCloud and click on terms and conditions it gives the message

G4 will not boot up after installing latest update

Just installed latest OS 10 update (10.4.8 or 9?) Mac will not boot up. The ring sounds on start up and the apple shows on video but it never gets to the rotating circle. It has been over an hour. I have restarted twice to no avail. I have also disconnect all peripheral. Do you have any suggestions as to what to do next?

Hi-
Welcome to Discussions!
Try a boot in safe mode (startup holding"shift" key after chime). This will help determine if you have conflicting drivers, fonts,etc. present, and helps bypass damaged software components:
http://docs.info.apple.com/article.html?artnum=107393
If successful, run Disk Utility. If not, try a single user boot, and run fsck:
http://docs.info.apple.com/article.html?artnum=106214
Alternatively, boot from your OS install disk, and run Disk Utility.
Post back with your results, please!
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP

I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000

gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

After installing latest update Realplayer recording no longer works, I think Mozila is using a library file with the same name

After installing the latest update to Firefox onto Vista operating system the record part of real player no longer works, I think Mozila and Real are using a library file with the same name and the Mozila update is overwriting a Realplayer library file.

I was giong to say, "Help me, Adobe Joe Kenobi", but it looks like you're growing a beard waiting for an answer, too.
The same thing happened to me today. I trusted the "update" message since it was from Adobe, and apprently did so at my own peril. Now I get the "failed to load Core dll" message with a secondary reference to a memory address.
Just an observation, but what good are these forums when there are no answers? I see this problem as "Caused by Adobe Update", and would expect them to troublshoot and offer up a remedy. Since you've been waiting over two months with no response, I suppose it's time to trek off wasting more of my precious time to fix their problem. If I find the solution, I'll post it back to you.
May the Force be with you.
Mark

Why did my iPad go into recovery mode after installing latest update?

I installed the latest update for the operating system and when my ipad 3 restarted, I get a unresponsive screen with a iTunes logo in the middle and a picture of the charging cord on the screen. It does not let me do anything with it. Any ideas?

Why it happened nobody can know for sure. Did the download stall? Do you run antivirus software that can interfere with the download? Did your internet connection cut out?
There could be any number of reasons why it happened. Were you able to restore the iPad and get it up and running again?

After installing latest update Macbook won't start up.

After installing the latest update my macbook won't start up. Instead of the login screen I get a flashing map icon with a question mark. My uncle says that means it can't find the startup disk and I had to startup from the install disk holding C but it didn't work. I'm quite desperate because I need my macbook for school (writing & producing music). I type this on a friend's computer... How can I fix this? Or do I really have to go to a mac store and part from my macbook for an unknown time...? :'(
I don't exactly know what version I have (can't check it now either) but it's at least 10.6.something and I always install the updates...

Hi
Anything unusual happen during the 10.5.3 update installation phase?
What type of iMac are you using? Your tag says G5 but also Intel core processors - it can't be both.
Try this:
-First unplug your computer and wait 10 minutes
-Next, simultaneously reinsert the power cord while pressing the power button for 5 seconds then release
-Press the power button again to start the computer - this resets the computer's system management unit (SMU) which controls your machines power functions.
-Next, press/hold down the P/R/option/command keys for 3 Apple chimes. This clears the machine's PRAM. After the 3rd chime release those keys and immediately hold down the Shift key to put the machine into Safe User Mode
-If you get to a log-in screen (may take several minutes as repair functions are occurring on the boot), log-in. When the login is complete, restart the computer as usual.
If no go, I suggest taking the machine to a certified Apple tech, or if you live near an Apple store to the Genius Bar.
Post back
Message was edited by: Hawaiian_Starman

HP Power Advisor has stopped working after installing latest updates

I have been using HP Power Advisor successfully on my Lenovo X230 running Windows 7. After installing the latest Power Advisor updates it no longer works. I can select a voltage from the dropdown on the Input Voltage screen but nothing happens when I click on the Go button, as if it is disabled. I've tried re-installing the download package which works fine but it stops working again as soon as I install the latest updates. Any ideas how to solve this?

Well on the website for HP power Advisor, it specifically says,
"Accurately estimate power consumption of your HP server and storage products"
There could be many different things interrupting your use of the program, but I'm going to say that maybe your largest problem with using the HP software designed for HP machines is your Lenovo.
Sorry,
Good Luck!
Did I help you? Please give me a Thumbs up to help let others know!

Why do i continuously get corrupted content message after installing newest updates?

I use Project Free TV quite a bit. It was working great, but after I installed new updates for Firefox, most of the links don't work and gives me Corrupted Content message. The links work fine through Explorer.
For example:
'''Corrupted Content Error'''
The page you are trying to view cannot be shown because an error in the data transmission was detected.
The page you are trying to view cannot be shown because an error in the data transmission was detected.Please contact the website owners to inform them of this problem.''

I use Project Free TV quite a bit. It was working great, but after I installed new updates for Firefox, most of the links don't work and gives me Corrupted Content message. The links work fine through Explorer.
For example:
'''Corrupted Content Error'''
The page you are trying to view cannot be shown because an error in the data transmission was detected.
The page you are trying to view cannot be shown because an error in the data transmission was detected.Please contact the website owners to inform them of this problem.''

Cannot get QuickTime to run after Installing latest update.

Similar Messages

Maybe you are looking for