Cannot get Quiz to report properly

Im using the IBM Websphere Portal LMS (http://www-01.ibm.com/software/websphere/portal/) and I'm trying to work out how I can get a quiz to report successfully to the LMS using SCORM 1.2.
I've tried all the following Quiz settings without luck. When testing, I firstly tried to fail once then exit, secondly, failed then retried the quiz and passed, and finally passed the quiz first time. The number of attempts would always update successfully, but would not update the score and subsequent completion/competency.
Attempt 1
Report Status: Pass/Fail
Report to LMS as: Percentage
Choose report data: Quiz result only
Reporting Level: Report Score
Attempt 2
Report Status: Pass/Fail
Report to LMS as: Percentage
Choose report data: Quiz result only
Reporting Level: Report Score
Attempt 3
Report Status: Pass/Fail
Report to LMS as: Percentage
Choose report data: Quiz result only
Reporting Level: Report Score
Attempt 4
Report Status: Pass/Fail
Report to LMS as: Percentage
Choose report data: Quiz result only
Reporting Level: Report Score
I ran each version of the 4 versions of the course through the following three tests:
I failed learning check the first time then closed the session.
I failed the learning check then passed it in the same session
I passed the learning check first time then closed the session.
The details below show the resulting reporting captured in the LMS.
Version 1 (Report Status: Pass/Fail and Report to LMS as: Percentage) Tests conducted
Test 1 - Logged as 100% complete when failed. Registered as having 1 learning attempt, no score logged. NOT AS EXPECTED
Test 2 - Logged as 100% complete when failed then passed in the same session. Registered as having 2 learning attempts, no score logged. NOT AS EXPECTED
Test 3 - Logged as 100% complete when passed. Registered as having 3 learning attempts, no score logged. NOT AS EXPECTED
Version 2 (Report Status: Pass/Fail and Report to LMS as: Score) Tests conducted
Test 1 - Logged as 100% complete when failed but did register as Not Yet Competent. Registered as having 1 learning attempt, 25% score logged (which was the achieved score). NOT AS EXPECTED
Test 2 - Logged as 100% complete when failed then passed in the same session. The status stayed as Not Yet Competent and did not update. Registered as having 2 learning attempts, 25% score stayed and was not updated. NOT AS EXPECTED
Test 3 - Logged as 100% complete when failed then passed in the same session. The status stayed as Not Yet Competent and did not update. Registered as having 3 learning attempts, 25% score stayed and was not updated. NOT AS EXPECTED
Version 3 (Report Status: Complete/Incomplete and Report to LMS as: Score) Tests conducted
Test 1 - Logged as 100% complete when failed. Registered as having 1 learning attempt, no score logged. NOT AS EXPECTED
Test 2 - Logged as 100% complete when failed then passed in the same session. Registered as having 2 learning attempts, no score logged. NOT AS EXPECTED
Test 3 - Logged as 100% complete when passed. Registered as having 3 learning attempts, no score logged. NOT AS EXPECTED
Version 4 (Report Status: Complete/Incomplete and Report to LMS as: Percentage) Tests conducted
Test 1 - Logged as Incomplete when failed. Registered as having 1 learning attempt, 25% score logged (which was the achieved score). AS EXPECTED
Test 2 - Logged as Incomplete when failed then passed in the same session. Registered as having 2 learning attempts, 25% score stayed and was not updated. NOT AS EXPECTED
Test 3 - Logged as Incomplete when passed. Registered as having 3 learning attempts, 25% score stayed and was not updated. NOT AS EXPECTED
Any ideas as to how I get this quiz to track as expected?
C-Dude

I may be missing something here but the settings for each of your four attempts look the same.
Report Status: Pass/Fail
Report to LMS as: Percentage
Choose report data: Quiz result only
Reporting Level: Report Score
I'm not familiar with the IBM LMS but when debugging a new LMS for SCORM I usually try my lesson first in SCORM Cloud just to make sure there's no issue with the module itself. If it scores correctly in SCORM Cloud I'm fairly confident it should do the same in the other LMS.
One thing you might try is using SCORM 2004 instead of SCORM 1.2. Though most of the time SCORM 1.2. is more likely to be supported, I have heard of rare occasions where the only thing that worked was using the setting for 2004.

Similar Messages

Cannot get network to work properly on fresh install

I just got myself a new lenovo laptop and naturally wanted to instakll arch on it immediately.
The network I am on requires me to register the MAC address of the machine before I can access anything more than our intranet. Since this is done via a website, that is obviously difficult to do with arch, so I ran a mandriva livecd first to register it.
Quirk number one: I set up a new partition table and installed arch with grub. somehow one of these things actually changed my MAC address because I needed to reregister it and I could tell there it was a new one registered.
However, booting into arch again and I still can't get it to work properly. pinging our intranet address works fine, but I can't get to the www and so cannot install any new packages.
I've installed mandriva on a separate partition and here it all works fine. So the problem seems to be with Arch. My uneducated guess is that it somehow registers as having a different MAC address in arch, which of course creates a bit of a catch-22 because I can't install the packages needed to go to our intranet website and fix it (I should note - once I re-registered my mac address after creating a new partition table, I could complete a net-install of arch. but no internet access having booted into it).
Anyone know how I can fix this?

tuxce wrote:actually, mac address doesn't change from one distribution to another
but you can check your mac address by using "ifconfig"
also verify if dns (/etc/resolv.conf) and route are well defined
resolv.conf has
# Generated by dhcpcd for interface eth0
search rhk.dk
nameserver 172.20.0.42
nameserver 195.184.96.2
rhk.dk is our intranet. I don't know if those numbers mean anything's out of place.

Cannot get Premultiplied to work properly

Hi,
I have rendered out a PNG image sequence from the 3d modeling application daz3d Carrara. The PNG files are 8 bit and the Carrara settings is "premultiplied". When importing thse into the Sony Vegas video NLE, all is fine when I set the property to premultiplied. In After Effects, however, I cannot get it correct. I have switched between Straight and Premultiplied, but it does not work. You can see the difference here, both PNG images are overlayed another image:
I must have overlooked something in After Effects, what can it be?

You definitely have something screwy going on in your Carrara settings. And you are rendering a Straight Alpha, not a Premultiplied one.
If you invert the alpha in the Interpret Footage dialog box, you'll be able to see your cone:
Here's how it may look by default:
Composited over a red solid:
Here's the invert switch:
And here's the result:
Now you see that your light is getting embedded into your alpha channel somehow, just not how you want it, or it's not getting embedded into your RGB channels properly. You need to adjust some settings in Carrara.
Also, you should try to avoid using .png as your still image sequence file format of choice. The way it handles alphas can be...substandard sometimes.

Creative x-fi xtreme audio. I cannot get it to work properly... Asio4all with no sound

I cannot record or do anything. No sound at all for some reason. Originally it was telling me that I would be using windows audio and so I switched to Asio drivers. I couldn't get any sound before and I can't now. I'm so confused..

Well, several things to try.
First, shut down any other software that might be using the sound card. This means things like Windows sounds, Windows Media Player, Real Player, etc. etc.
Second, in Audition, go to Edit/Audio Hardware Setup. Make sure the tick box beside "Release ASIO Driver in Background" is NOT ticked.
Third, make sure Asio4All is selected as the default driver in the appropriate drop down menu.
Fourth, select the sound card input(s) and output(s) you want to use for the sound input and monitoring. Don't forget you have separate menus for this for Edit View and Multitrack View depending where you're recording--there are selection tabs at the top of the Audio Hardware Setup screen.
Fifth,, I've never used the sound card you have but, if it's like most Creative stuff, you'll have a sound card menu and mixer you can access from an icon in the bottom right hand corner of your screen. Right click this and select the input(s) you want. You may have to do this first to get the right inputs to show up on your AA Audio Hardware Setup screen.
Finally, if you're recording in Multitrack view, you may have to select the appropriate inputs in each track you want to use--that's the menu beside the right-pointing arrow at the beginning of each track.
Once you have everything working, you can save your settings as a default session so you don't have to do this every time.
Bob

I cannot get iWeb to work properly

I am trying to create a blog using iWeb. However, I can only create a homepage (to the left, there's a red dot and I have managed to name to homepage). Here comes the problem. I am not getting any further. It is impossibly to do the first step which is add a page. "New website" and "New page" are impossible to click on since they are light grey and not even an option to click on. I have been trying over a dozen times to get a blog started but no luck so far. What is wrong? I have a mac. account. I don't get any window up with pre-made designs to choose from... nothing!
Please help me. Thank you in advance!
Regards,
maan84

Good tips! I also couldn't get iWeb to work (I knew that months ago just messing with it I had totally screwed it up and never fixed it). The time came yesterday when I decided I really wanted to use it and was stuck with everything grayed out and couldn't do a thing.
I tried all of the tips posted by Kabing. Tricking it with iphoto didn't cut it. I had to resort to the clean install. I trashed everything iWeb related and used the recovery disks to reinstall only iWeb. It worked like a charm and iWeb is back in action.
Thanks!

I cannot get Firefox to install properly on my computer

I have used Firefox for a long time and had no problems. All of a sudden, the browser will not open. After waiting for about 10 minutes, the browser will finally say, "well, this is embarassing..." I uninstalled firefox and then re-installed it and it still doesn't work.

See also:
*http://kb.mozillazine.org/Browser_will_not_start_up
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Cannot Get SAP Crystal Reports SP1 2013 to Run!

Hi,
I have just purchased CR 2013 and can't get it to run after installation!
I am getting an error "The application was aunable to start correctly (0xc0150002)."
Looking at the event log it is listed as a "SidebySide" error:
Activation context generation failed for "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x86\fssl-1-2-1-6.dll".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.762_none_10b2f55f9bffb8f8.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.6195_none_d09154e044272b9a.manifest.
I think it relates to my installation of the Visual C++ Redistributable 2005, where i did have two versions installed, got rid of one, even tried to edit it in the registry, with no luck.
Can anyone help?!

Here is a link to the KBA viewable on SCN.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I cannot get my crash report so that I can look at the modules and see if I have malware.

Mozilla is unable to retrieve my crash report. Is there another way to view the modules information to see if I have malware/

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Cannot get Dreamweaver CS5 To work properly

I have installed and uninstalled Dreamweaver CS5 several times, I have deleted the config file and still cannot get Dreamweaver to work properly. When I start dreamweaver CS5 the spash screen doesn't display properly, when the program opens up I am unable to manage sites all that is visible is the text box for site name and site address, nothing else is visible.
I have run a registry clean program to remove any traces of previous versions of dreamweaver to no avail. I do not receive any error messages at any point dreamweaver will just not work properly.
Thank you for your assistance.

Registry cleaners don't remove everything. Many files are in hidden folders within the user accounts on the operating systems. Have you tried the clean tool?
http://www.adobe.com/support/contact/cscleanertool.html
Also, something else to consider, try making another user account on the computer and see if that helps. I've seen user profiles on computers become corrupt and can cause this issue as well.

Can we use ad hoc query to get a temporary report of payroll result?

Hi,All
can we use ad hoc query to get a temporary report of payroll result?or we have to get a report of payroll result by customizing and ABAP?
and how can I customizing a report on the basis of standard SAP report for payroll?

Hi
As of my Knowledge You cannot get the payroll report through Adhoc query you have to go for ABAP Devlopment
Thanks
Mahantesh

MAMP + WordPress + xip.io: cannot get linked assets to load

I managed to get Mamp Pro virtual host domains (example: http://mysite.dev) working with some help from the stackoverflow link above ( http://stackoverflow.com/questions/11546356/xip-io-with-mamp-pro-doesnt-work ), however I still cannot get things to work properly with local WordPress installs. I get the same old issue of content loading, but linked assets (CSS, JS, images, etc) do not load. When I used to use http://localhost/ urls I got the same issue unless I set each WordPress install to use the machine’s IP address, which was annoying when working from different locations. Now that I’ve set up virtual hosts and am using .dev domains, which I really like for a variety of reasons, I’m back to square 1, where Edge Inspect becomes useless.

Hi Gabe, the heart of this issue is caused by a feature of Wordpress, not because of some issue with Edge Inspect. For some reason Wordpress refers refers to all linked assets with a full URL rather than a relative URL, and that causes a variety of problems including the one you're seeing.
You should be able to work around this. It's not clear to me from your message above where you are in the process, so I'll just try to cover all the steps in a general way. Plus, this may help others trying to do the same thing:
Your basic first step is that you have to get virtual hosts working in MAMP. That means, if you've setup actualgabe.dev as a virtual host, that without Edge Inspect or xip.io you should be able to type in (for example) http://actualgabe.dev/index.html into your browser and view a simple web page running on your machine.
You've got to get Wordpress working with that virtual domain you've got set up. That means that all of the assets that Wordpress is referring to with a full URL should properly reference back to your machine and be viewable in your browser. Since Wordpress may refer to those assets with a localhost URL, you'll have to inspect the page to ensure that Wordpress is actually referencing the assets with your actualgabe.dev virtual host definition.
Now make sure that MAMP, Wordpress, and xip.io all function correctly together without Edge Inspect involved. Assuming that you've got the actualgabe.dev virtual host configured as in steps one and two, then go ahead and take one of your devices and type in a URL of http://actualgabe.dev.<YOUR_MACHINE_IP_ADDRESS>.xip.io/index.html. So if the IP address of the computer you're hosting the site from is 10.0.0.1, you'd enter http://actualgabe.dev.10.0.0.1.xip.io/index.html. You should be able to see your local Wordpress site from your computer with all of it's associated local assets.
Once you have those previous 3 steps working and fully tested, you should be able to start Edge Inspect, connect your devices up, and use that same URL from step 3 (e.g. http://actualgabe.dev.10.0.0.1.xip.io/index.html) in Chrome and see your Wordpress page and all of its assets.
Let me know if you have any questions,
Mark

How to get the output .pdf file of a quiz to report to the quiz results analyzer on my internal server (mamp)

I created a quiz.
Created an internal server on my compute rising a MAMP.
When I publish my quiz using the multi-file publishing options...
I am able to use both the "HTML" and the "swf" output files to complete a quiz and reporting the results to the quiz results analyzer.
However, I am unable to get the output .pdf field to reporting to the quiz results analyzer.
Any help? Would this issue have to do with the Acrobat Professional setting? Captivate setting? My internal server setting? or output fuel placement?
I tired to put the .pdf file in the same MAMP root folder location as my "internalserverreporting.php and internalserverread.php files.
Thanks for the help.

Hello Varun,
You cqan submit the report as a JOB and export the out put to memory, once the job is complete you can read the list to display the output.
Cheers,
Mano
Cut & Paste form SAP help.
Submit report ....
EXPORTING LIST TO MEMORY
Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST".

Deploy Monitoring reports Fail Cannot get the ReportServerWebService URL

Hi, I am deploying the monitoring reports in a single host different to FE or Backend
When I launch the wizard the installation fail with the message:
> Deploying Monitoring Reports... This might take a few minutes.
The Monitoring Database is using SQL instance "mendbsql3\ARCHLYNC2013".
The data source is using SQL instance "(local)\ARCHLYNC2013".
System.Runtime.InteropServices.COMException (0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr
errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException (0x800700A4)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()System.Runtime.InteropServices.COMException
(0x800700A4)   at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)   at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()   at Microsoft.PowerShell.Commands.GetWmiObjectCommand.BeginProcessing()Cannot
get the ReportServerWebService URL. Verify that Reporting Services is deployed and configured properly on the target SQL instance:"mendbsql3\ARCHLYNC2013", and that WMI is included on the exception list of firewall setting on the server that is running
Reporting Services.
I check the configuration of the reporting services configuration, all see OK. I probe the URL in the server that I want to configure like a monitoring reporter
and I can explorer and administrate the Reporting Services. The firewall into the servers is off.
Somebody else have this problem.
THX.

Hi Lapatinogo
This is how I install Monitoring in my lab series.
http://lyncme.co.uk/microsoft-lync-server-2013/the-complete-home-lync-lab-part-3-installing-lync-2013-monitoring-and-lync-edge-server/
Navigate –> Lync Server –> Your Site –>
Lync Server 2013 –> Standard Edition Front End Servers –>
Your Server
Right Click –> Edit Properties –> Scroll Down to Monitoring
Tick Monitoring –> Press New –> Enter your
SQL Server FQDN –> Specify your instance –> Untick
This SQL instance is in mirroring relation (As stated in Part 1 you should already have a SQL Server with an instance available) –> Press
OK
Press OK –> Press Action –> Press
Topology –> Press Publish
Press Next
Press Next –> This should complete successfully –> Press
Finish
Launch Lync Deployment Wizard
Press Yes –> Click Deploy Monitoring Reports
Press Next
Press Specify a User Account and Password that has rights to the instance –> Press Next
Press Specify User Group (I will be using the default group) –> Press
Next
Press Finish
Launch the Lync Server Control Panel
Login with an account that is apart of the CSAdministrator
Click View Monitoring reports –> Click your SQL Server FQDN
You should now see the below window Successful deployment of Lync Monitoring

Firefox 13 and 14 will not install properly on my windows 7 starter. Also I cannot get the Scrapbook addon to work. Can you tell me why ?

I have tried to install Firefox 13 and 14 on my netbook, running a Windows 7 starter OS. The installation begins to go smoothly from the setup.exe file; but after the installation seems complete, and I press the 'Open Firefox' button the firefox programme can be seen to start opening because it accumulates about 50mb of private bytes RAM on the windows task manager or on the 'process explorer' utility program by sysinternals. '''However the firefox screen/window never opens up and so firefox does not seem to be properly installed.'''' Also I have had problems with getting the Scrapbook" addon to install properly. I have another computer, a laptop, running XP Home, and I can get the Firefox 13 or 14 to install but it is on this other computer that I cannot get the 'Scrapook' addon to install properly; There is no notice on the Addon page saying the 'Scrapbook' addon does not work on Firefox 13 or 14, and the addon does install, but not properly, so it does not work.
I have the old Firefox setup.exe files, and so I have managed to install an old version, firefox 3 or 4, on an external hard drive. I have successfully got this old firefox to work on the XP Home laptop from an external hard drive, and can successfully use the 'Scrapbook' addon in this way.
I cannot understand why I have problems with Firefox 13 or 14. I think I first noticed the problem about 'Scrapbook' with Firefox 12.

It seems your Mozilla installation is broken. Try the following steps to fully uninstall Mozilla Firefox:
1. Uninstall Firefox as you would normally do.
2. Open a command prompt as administrator.
3. By using the cd and rd command, remove Firefox AppData and Roaming folders, for example:
C:\Users\USERNAME> cd AppData
C:\Users\USERNAME\AppData> cd Local
C:\Users\USERNAME\AppData\Local> cd Mozilla
C:\Users\USERNAME\AppData\Local\Mozilla> rd /s Firefox
C:\Users\USERNAME\AppData\Local\Mozilla\*.* - Are you sure? (y/n) y
C:\Users\USERNAME\AppData\Local\Mozilla> cd ..
C:\Users\USERNAME\AppData\Local> cd ..
C:\Users\USERNAME\AppData\> cd Roaming
C:\Users\USERNAME\AppData\Roaming> cd Mozilla
C:\Users\USERNAME\AppData\Roaming\Mozilla> rd /s Firefox
C:\Users\USERNAME\AppData\Roaming\Mozilla\*.* - Are you sure (y/n) y
C:\Users\USERNAME\AppData\Roaming\Mozilla > exit
Remember to press Enter each time.
4. After that, open a hard disk clean-up tool (such as CCleaner or Windows built-in) and remove all temporary files from your computer.
5. Restart your computer. Download '''again''' the Firefox package from [http://www.mozilla.org/es-ES/download/?product=firefox-14.0.1&os=win&lang=es-ES Mozilla official servers] and try to install Firefox. If the problem persists maybe your computer has a problem or is infected with viruses.
About the Scrapbook add-on, I could get it to work. It has no icon when docked to the toolbar, but you can anyway open it. Right-click a button on the toolbar, click Customize... find the Scrapbook icon, drag it to the bookmarks bar so you can see the icon and click on it to open it. Whenever you need to save a page, right-click that page and choose Save page.

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Cannot get Quiz to report properly

Similar Messages

Maybe you are looking for