Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Slide show in PowerPosint for mac 2011 on iMac will not open full screen mode on secondary monitor. Regardless of how I set the slide show preferences it always opens on primary monior with secondardy monitor having totally balck screen. Need some help if anyone else has run into this problem.

You should contact Microsoft for Mac Support and/or post in their forums.

Similar Messages

Need some help here. cannot communicate with Fingerprint sensor

Ok, so I rebooted and was able to install the new sw ver. .245 ...but the T500 still cannot communicate with the sensor. It asks me to verify that the sensor is "ready" but give no guidance on how to do so in any of the help options or in the fingerprint reader manager or the device manager...so how can I find the sensor??? Very frustrating. Please help.

The scriptgen takes your CAP file and generates an APDU script to load it onto a JCRE implementation. The installer applet is what recieves the APDU commands to load that CAP file. Read the JCVM specification and read what a CAP file is and all the individual CAP components that make up the CAP file.

Really need some help here to try and get Fios services in my building

I have been trying to convince my landlord for months to get Fios in the building. Here is a recent email exchange with him. Does anyone know if any of this is true, about the install damages? If it is true, then Verizon needs to get their act together!
Here is the email exchange.
D-
I am sorry but we have no plans to let Verizon in to this building. They do
a lot of damage to the building and do not make the repairs after or pay for
any damages they do.
Thanks,
Steven
-----Original Message-----
From: D
Sent: Tuesday, April 24, 2012 12:19 PM
To: {edited for privacy}
Subject: Question
Hey Steve,
Could you please do me a favor and speak with the building owner once again
about Fios? I know you mentioned he wasn't to keen on the idea of them
doing the install but it would really make a big difference. As of right
now my iPad's cellular connected internet is faster for $30/mo than the
$120/mo I'm paying Time Warner. On top of that, I can't even watch HD
movies on demand. I've had TWC out here twice in the last four months and
every time they claim nothing is wrong. Its very frustrating. I'll do
almost anything I can to assist in this. Please let me know if you can do
anything.
Thank you as always!

james211 wrote:
I have been trying to convince my landlord for months to get Fios in the building.
If your landlord doesn't want FIOS in the building, then it's not going to happen.
Vote with your wallet and move.

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

HT4623 Just installed io7, now I cannot get Netflix to be full screen. Also ipad start up etc seems a lot slower.

Just installed ios7 on ipad 3. Now cannot get netflix to be full screen. Also start up of ipad is suddenly slow.

I don't use netflix yet on mine but the slow startup I might be able to help. I just restarted mine and in maybe 5 seconds is restarted.
If you have a lot of programs running in the background that may be causing the slow start or shutdown. To close those running programs, 4 finger upto get to the running programs and to close them, tap one and hold for a second and flip upwards,, it will go off the top of the screen, closing it. Do this with all that you want closed, there will only be the main screen you can't close that will be left.
I also shut off location services, Bluetooth and under safari there a use data option which for some reason turned on but I could have clicked yes somewhere and those got turned on, but I turned them off since I don't need them on.
Then try a restart.

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferenc

Ever since I updated InDesign CC (2014) approximately 22 days ago... I CANNOT get the welcome screen to not come on at the launch on InDesign. I set the preferences in InDesign to NOT show the welcome screen upon launch, but it will NOT hold the preferences i choose. Anyone else have any other ideas? I am about to lose my mind... I hate you ADOBE!!!

that s just the problem, that is why my level of frustration is boiling over ... I have told InDesign over and over again "Do Not Show Again" but it will just not hold the settings. It might hold it for a day or so, but then suddenly there it is again on another launch. Very very annoying.

Cannot view jpg files in full page mode. Contents of jpg files are enlarged so that it requires 4 pages to print one page.

When people send me jpg files that contain a page of information, I cannot view the file in full page mode. I can only view 1 quadrant of the page at a time. If I print the jpg file, it uses 4 pieces of paper (1 quadrant per page). Others who receive this file can view it fine.
== This happened ==
Every time Firefox opened
== It has always worked this way.

There is an option for the Initial View that is "Magnification:" "Fit Page". And this works for the initial page when the PDF is opened and it does not matter what the page size it, Acrobat/Reader will automatically fill the screen with the page. If you want the zoom type to change with each page then you need add a page open script to each page to set the pages zoom type to "zoomtype.fitP"
this.zoomType = zoomtype.fitP;

HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists.

Ok I got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please

Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open. What do I need to do?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it. Update it to IOS 7.1.1

Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!

Hi Melomane1024,
If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Thanks for using Apple Support Communities.
Best,
Brett L

Need some help in creating Search Help for standard screen/field

I need some help in adding a search-help to a standard screen-field.
Transaction Code - PP01,
Plan Version - Current Plan (PLVAR = '01'),
Object Type - Position ( OTYPE = 'S'),
Click on Infotype Name - Object ( Infotype 1000) and Create.
I need to add search help to fields Object Abbr (P1000-SHORT) / Object Name (P1000-STEXT).
I want to create one custom table with fields, Position Abb, Position Name, Job. Position Abb should be Primary Key. And when object type is Position (S), I should be able to press F4 for Object Abb/Object Name fields and should return Position Abbr and Position Name.
I specify again, I have to add a new search help to standard screen/field and not to enhance it.
This is HR specific transaction. If someone has done similar thing with some other transation, please let me know.
There is no existing search help for these fields. If sm1 ever tried or has an idea how to add new search help to a standard screen/field.
It's urgent.
Thanks in advace. Suitable answers will be rewarded

Hi Pradeep,
Please have a look into the below site which might be useful
Enhancing a Standard Search Help
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/daeda0d7-0701-0010-8caa-
edc983384237
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee93446011d189700000e8322d00/frameset.htm
A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
A search help exit is called at certain timepoints in the input help process.
Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
During the input help process, a number of timepoints are defined that each define the beginning of an important operation of the input help process.
If the input help process is defined with a search help having a search help exit, this search help exit is called at each of these timepoints. If required, the search help exit can also influence the process and even determine that the process should be continued at a different timepoint.
timepoints
The following timepoints are defined:
1. SELONE
Call before selecting an elementary search help. The possible elementary search helps are already in SHLP_TAB. This timepoint can be used in a search help exit of a collective search help to restrict the selection possibilities for the elementary search helps.
Entries that are deleted from SHLP_TAB in this step are not offered in the elementary search help selection. If there is only one entry remaining in SHLP_TAB, the dialog box for selecting elementary search helps is skipped. You may not change the next timepoint.
The timepoint is not accessed again if another elementary search help is to be selected during the dialog.
2. PRESEL1
After selecting an elementary search help. Table INTERFACE has not yet been copied to table SELOPT at this timepoint in the definition of the search help (type SHLP_DESCR_T). This means that you can still influence the attachment of the search help to the screen here. (Table INTERFACE contains the information about how the search help parameters are related to the screen fields).
3. PRESEL
Before sending the dialog box for restricting values. This timepoint is suitable for predefining the value restriction or for completely suppressing or copying the dialog.
4. SELECT
Before selecting the values. If you do not want the default selection, you should copy this timepoint with a search help exit. DISP should be set as the next timepoint.
5. DISP
Before displaying the hit list. This timepoint is suitable for restricting the values to be displayed, e.g. depending on authorizations.
6. RETURN (usually as return value for the next timepoint)
The RETURN timepoint should be returned as the next step if a single hit was selected in a search help exit.
It can make sense to change the F4 flow at this timepoint if control of the process sequence of the Transaction should depend on the selected value (typical example: setting SET/GET parameters). However, you should note that the process will then depend on whether a value was entered manually or with an input help.
7. RETTOP
You only go to this timepoint if the input help is controlled by a collective search help. It directly follows the timepoint RETURN. The search help exit of the collective search help, however, is called at timepoint RETTOP.
8. EXIT (only for return as next timepoint)
The EXIT timepoint should be returned as the next step if the user had the opportunity to terminate the dialog within the search help exit.
9. CREATE
The CREATE timepoint is only accessed if the user selects the function "Create new values". This function is only available if field CUSTTAB of the control string CALLCONTROL was given a value not equal to SPACE earlier on.
The name of the (customizing) table to be maintained is normally entered there. The next step returned after CREATE should be SELECT so that the newly entered value can be selected and then displayed.
10. APP1, APP2, APP3
If further pushbuttons are introduced in the hit list with function module F4UT_LIST_EXIT, these timepoints are introduced. They are accessed when the user presses the corresponding pushbutton.
Note: If the F4 help is controlled by a collective search help, the search help exit of the collective search help is called at timepoints SELONE and RETTOP. (RETTOP only if the user selects a value.) At all other timepoints the search help exit of the selected elementary search help is called.
If the F4 help is controlled by an elementary search help, timepoint RETTOP is not executed. The search help exit of the elementary search help is called at timepoint SELONE (at the
F4IF_SHLP_EXIT_EXAMPLE
This module has been created as an example for the interface and design of Search help exits in Search help.
All the interface parameters defined here are mandatory for a function module to be used as a search help exit, because the calling program does not know which parameters are actually used internally.
A search help exit is called repeatedly in connection with several
events during the F4 process. The relevant step of the process is passed on in the CALLCONTROL step. If the module is intended to perform only a few modifications before the step, CALLCONTROL-STEP should remain unchanged.
However, if the step is performed completely by the module, the following step must be returned in CALLCONTROL-STEP.
The module must react with an immediate EXIT to all steps that it does not know or does not want to handle.
Hope this info will help you.
***Reward points if found useful
Regards,
Naresh

How to set default date value to a field on screen

How to set default date value to a field on screen and allow users to modify it ....

Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards.

Have been trying to get a simple rollover tooltip going but haven't had any success...need some help

Have been trying to get a simple rollover tooltip going but haven't had any success...need some help please

start watching at 11min
http://www.youtube.com/watch?v=6_FJYN36_94
hope this helps

The backup disk image "/Volumes/Data/David Witkowski's Mac Pro.sparsebundle" is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message. I need some help to fix this.

The backup disk image “/Volumes/Data/David Witkowski’s Mac Pro.sparsebundle” is already in use. Whenever Time Machine starts to backup to Time Capsuel I get the previous error message Where can I find this disk image?. I need some help to fix this.
Thanks,
David W

There are multiple answers and solutions if you look just to the right under the heading of More Like This.

Cannot get slide show in full screen mode to come up on secondary monitor regardless of how I set up show it always opens on primary screen. Need some help here.

Similar Messages

Maybe you are looking for