Cannot get Starcraft 2 Beta to work with BootCamp

I have a mid 2008 15" 2.4GHz Macbook pro running OS 10.6. I am trying to run the Starcraft 2 beta on my 64x Windows 7 partition, it tells me that "My 3D somethingorother is dedicated to another program. Please close all other 3D programs and try again." I downloaded the update here http://www.apple.com/support/bootcamp/, but it tells me "BootCamp 3.0 is not installed. Install BootCamp 3.0 and try again." I have BootCamp 3.0.1 installed on my OSX partition (not sure if this is the same as 3.1), but how can I get the software update to work? I need to play starcraft!

Hi!
I would suggest the following:
Insert your Snow Leopard disk, when you are in Windows 7. Install the Bootcamp 3.0 drivers.
Then restart your computer into Windows 7 and apply the Bootcamp 3.1 update.
Then, you can try again running Starcraft 2 beta. However, you can not be sure that this beta version
will be running.
With regards,
Dagd

Similar Messages

  • Equium A200-196: Cannot get all speakers to work with Creative T7900 home cinema system

    I run windows Vista home premium, on my Toshiba Equium A200-196, and i have a 7.1 Creative T7900 system.
    I cannot get all speakers to work. Only the woofer and two front speakers are currently playing sound.
    The sound option in the control panel doesn't give me any options besides stereo speakers.
    I have no option of selecting 5.1 or 7.1 speakers and i need to know do i need a software driver (all drivers are showing up as up-to-date), or do i have to change some other option, or purchase an external sound card?
    I only have two jack inputs, a mic in and headphone out. How can i get all speakers to work and achieve the home cinema experience?

    Hi there,
    I dont think that the sound card is capable to do 5.1/7.1 since there are many more jacks required then only one "sound-output".
    If I were you I would purchase a external USB-soundcard which is capable to do 5.1 or 7.1 to deliver you the full home-cinema experience.
    Another solution is not existent. Sorry mate.
    greets

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • Satellite P300-150 PSPC4E: Cannot get Express Card slot working with XP

    Hello.
    I have downgraded to XP on my machine and unfortunetly I am unable to get the Express card slot to work.
    The Intel chipset drivers on the Toshiba site haven't dont anything.
    I am trying to get an eSata port working via the express card like I did with Vista but no joy at all.
    Any ideas?
    Regards
    Rob

    Go to Device Manager and check if the express card is installed properly, or if its reporting an error.
    You should update the BIOS to the latest version. BIOS updates can sometimes fix problems like this.
    And ensure you have XP Service Pack 2 or 3 installed.

  • Cannot get ITS SSO to work with EP6 Sp15

    I am having problems with SSO from EP6 to ITS (my EP5 to the same ITS works great).
    This is what I have done.....
    It is a R3 4.6C system so I wondered if any patches were needed....however I have got SSO working with the SAP Win GUI - so this tells me that the R3 system and the imported verify.der certificate is OK.
    The connection test for ITS works - so this tells me the parameters in the System are correct.
    The parameter mysapcomusesso2cookie is set to 1 - and this is the same ITS system that is used for SSO between the EP5 portal and R3....and it works in this case.
    I have set only the following parameters in the System:
    ITS Description = Test1
    ITS Host Name = myportal.com:91
    ITS Path= /scripts/wgate
    ITS Protoco = http
    Logon Method = LOGONTICKETS
    Anything else I may be missing?
    Thanks
    Patrick

    Hi
    What mean "FQDN"?
    I must 'dots' in my address..?
    Bogdan

  • HP Photosmart Printer-cannot get the apps to work with a USB hook up

    I purchased a HP Photosmart Printer C310 and hooked it up to a USB, not wireless. The apps on the printer will not work, says it has to be on wireless for those features to work. When I purchased it the guy said I could use those apps even if it was on a USB hook up? Any ideas of how to get the apps to work without the wireless?

    Make sure you have done this to reset the iPod
    http://support.apple.com/kb/ht1320
    and that you have restarted your computer since this problem occurred.  You should also try disconnecting all USB devices from your computer including hubs (except standard keyboard and mouse if normally used), and connecting the iPod by itself to a direct USB port.
    There are no iPod viruses. But data corruption on the iPod's storage is possible. 
    If doing the above does not help, you may want to do a Restore on the iPod, from the iPod's Summary tab in iTunes.  This will erase the iPod, re-install its software, and set it to default settings.  If data corruption or a software glitch is causing the problem, a Restore should fix it.

  • Cannot get any SSD to work with my mid 2012 13 inch macbook pro!! PLEASE HELP!

    I have tried over and over and NO ssd seems to work. All I get is a blank screen. This is very strange because I had a 128gb crucial m4 running firmware 000f for about 8 months before I decided to upgrade and never had a problem with it, not a single beach ball. Now when I decide to upgrade the 128gb m4 with a 256 m4, I run into problems. I returned the 256 m4 thinking that the drive was defective, and I purchased a Samsung 840 250gb to see if I would have any luck with that one. NOPE. Still didnt work. As a last resort I went with the intel 520 240gb, and still nothing.  Im extremely puzzled by this. Especially since I was alredy running a ssd on my machine prior to deciding to upgrade. ALL the ssd's I tried were brand new and sealed and the method for installing the OS on them was by using carbon copy cloner. Anybody know whats going on? Anybody else experiencing/experienced the same?? Did I ruin my mac?? Right now I am using a Western Digital scorpio black 7200rpm 500gb hard drive and it works just fine. The problem seems to happen only when I decide to upgrade to a ssd. Oh, and by the way, I am running Mountain lion 10.8.3

    I'm running 10.8.3 with a 512GB Crucial m4 SSD and having no problems. It sounds as if you've a problem with your SATA cable, which will rear its ugly head more often with SSDs than with hard drives.
    If I were you, I'd order a new SATA cable (from ifixit or PowerBookMedic or maybe even OWC). Then try out a new SSD. See if your problems are fixed then.
    Clinton

  • How do i get dual monitors to work with bootcamp (windows 7)

    i have a macbook pro intel core i7
    using a VGA adapter for connection of the monitor
    when i use the mac side the dual screens work perfectly, but when i use bootcamp with windows 7 the screen stays blank, i know it ver recognizes it because when i drag my mouse over to the right it goes out of the screen and then i have to drag for a while before its back on the mac screen, so it is being used but not being displayed. also when i first start up windows its shows the boot screen on the monitor aswel but then goes blank.

    If you are talking about MS Windows then you need to launch either Boot Camp or run it in Virtualization app such as Parallels or VM Fusion.  You also need a valid license of MS Windows.However if that is not what you mean then you must be much more specific. For example:
    "I want to share some files between my PC running Windows 7 and my new iMac running 10.9.3, how do I go about that?"

  • Cannot Get My Powerbook To Work With New Hard Drive

    My powerbook (1.67 ghz, 2 gb ram, 80 GB original hdd) was running out of room on the hard drive, so I purchased a WD 250 GB hard drive IDE to replace it. I haven't really done much on my powerbook prior to this, so I wasn't sure exactly if any problems had occured before I did this. But I replaced the drive and tried to boot from a CD and could not do it. I was using a Tiger Retail disc because I can't find my restore discs. I never had any problem reading my discs prior to this, as I have a DVD/RW drive and it has never failed on me. I tried booting from other discs as well and the same problem occured. So after several failed attempts, I connected my powerbook to my ibook through target mode and was able to install the OS on the partition of my powerbook. After completing the install, I was able to access the powerbook partition through the ibook and everything seemed fine. I unplugged the firewire cable and tried to boot my powerbook. The first time I did it, it took me past the white and grey apple screen and stuck on the blue screen, everytime after that, it hung up on the grey and white screen. I tried resetting everything through open firmware and zapping the PRAM, but no change. I tried booting into safe mode and it hung up at the grey and white screen. I was able to boot into single user mode and ran the check utility and everything came up ok. I reconnected the powerbook to the ibook and ran disk utility that way and repaired all permissions. It still has hung up on me. I've been trying to get this to work for almost 8 hours and nothing has worked for me. I'm starting to think its something really serious like a hardware failure. I don't know what version of tiger my powerbook shipped with and I'm not sure if having just 10.4 would cause this issue. I tried removing the added ram and everything as well. I hope someone can give me some things to try and hopefully get it to work. I'm pulling my hair out on this one. Any help would be greatly appreciated.

    One way to know if it is a hardware issue (or something you may have done in the DIY upgrade process, sorry) is to try putting back in the old stock 80GB drive and see if everything works well.
    If YES, then your PowerBook is fine and it is your new drive that is faulty. Return it or get a replacement under warranty (if relatively new, maybe you don't need to use the warranty).
    If NO, then something has happened during the upgrade process.
    That's my first diagnosis.

  • Cannot get 6.1 Sound working with my Audigy 2 ZS Plati

    Currently the Onkyo HT-S770 system I have is set up properly and works fine with my Xbox. However, when playing music from my computer it only comes out as 2.. When I run all the speaker tests from the THX setup console, I can only hear noise from the front left and right speakers. They are set up for 96 khz Digital Output(using digital optical from the front panel) and are set to 6.. I have also checked the CMSS3D box in the EAX console.
    Any help is greatly appreciated.Message Edited by sjabarri on 0-0-2005 06:33 PM

    Sjabarri,
    This article should answer your question:
    http://us.creative.com/support/kb/ar...p?l=2&sid=4858
    Jeremy

  • HP Photosmart Plus ePrint. Cannot get air print to work with email address

    Have installed HP Photosmart Plus with ePrint Wireless.  Have been unable to get unit to print email messages submitted as advertised.  Any suggestions?

    Hi dturner,
    I'll need additional information to assist; are we using Airprint or an Apple device email client and using ePrint? What device are you trying to print from? What is your current netrwork configuration (router make and model, wireless or ethernet etc)
    I was an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • HT3771 Hi, I cannot get my HP2200dn to work with my Intel macs after updating to Snow Leopard

    Since installing Snow Leopard I can only print using my HP Laserjet 2200dn mono laser printer if I print via my old G4 which is running Tiger.
    The G4 has the HP printer as a shared printer and is connected using Appletalk.
    Obviously this is very inconvenient as the old G4 is not always on!
    I have downloaded and installed two lots of Apple printer driver updates, along with the latest version of Gutenprint.
    I have tried resetting the printing system, all to no avail.
    No matter what I try the printer keeps pausing before doing anything and pauses again within a few seconds of restarting.
    I have tried various printer drivers with no effect, including the Gutenprint one.
    Any help gratefully received!

    Thank YOU for notifying us of the solution that worked.  Very much appreciated.  May work for other users with the same issue as yourself. 

  • Has any one got Titan Quest to work with Bootcamp?

    I'm trying to get Titan Quest to work with Bootcamp on my MacBook and even though the min. requirements ask for 64MB it doesn't work. Something about “can't initialize graphics engine.“
    If anybody has got it to work, I'd appreciate the info.

    could be the intel GMA 950 is not suppoerted by titan quest.
    Try visit titan quest official sites, maybe they offer patch or updater for make it working for newer or unsupported chip set.
    Good Luck.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • My mac works well on internet with safari. I cannot get my itunes to connect with itunes store. can anybody help me?, My mac works well on internet with safari. I cannot get my itunes to connect with itunes store. can anybody help me?

    My mac works well on internet with safari. I cannot get my itunes to connect with itunes store. can anybody help me?, My mac works well on internet with safari. I cannot get my itunes to connect with itunes store. can anybody help me?

    i tunes asks me to check internet connection.

Maybe you are looking for