Cannot get Tecra 8200 online
Hi, I am a great user of PCs but know nothing about them really, my Husband has bought me a second hand Tecra, which I tried to connect using the new Netgear cable router to my pc, ( I am a NTL user) all systems seem fine and it says its connected, but all that comes up is cannot find server! Im obviously doing something wrong. Is there anything else I need for my Tecra? I have a wireless adapter as well - do I need a wireless LAN card to slot in? Im really confused! To be on the safe side I have had to get someone in to help tomorrow, which Im not best pleased about - I dont really like strangers looking at my PC.lol ! So I need to make sure I have everything ready for when he comes round. Thanks for any advice- greatly appreciated
Hello Sarah
First of all it will be interesting to know if you have the same problem with other PC connected to your router or just with your Tecra notebook. I presume you use DSL connectivity and you want to connect Tecra to Netgear router.
I hope your router is right configured and set to PPPoE (dynamic connection type) and you do not have fixed IP address. Check please LAN properties and be sure that in TCP/IP properties IP address must be set to Obtain an IP address automatically.
Please check also LAN card status in device manager and be sure LAN card is properly installed, listed and also enabled. Please go into control panel > network connections, click with right mouse button by Local Area Connection and check STATUS. What is shown there?
If you have WLAN card you can also establish WLAN connection but it is other theme.
Similar Messages
-
How can I cancel my adobe subscription? I am in the trial period and cannot get any assistance online. This is really annoying.
Hi tokhouse,
Please refer to the help document below:
Cancel your membership or subscription | Creative Cloud
In case of any issues, please contact the support:
Contact Customer Care
Regards,
Sheena -
Premier Elements 10 - I cannot get the Share/Online Feature to work
Brand new install of premier elements 10 on a new PC running Windows 7.
Everything was working great until it was time to do something with the movie project. I want to get the movie to YouTube but when I went to Share and then Selected Online - nothing happened. I can save to computer, DVD, all of the other Share options but nothing happens when I click online. All of the other choices bring up a new screen with saving details but when I select Online - I don't even get a reaction from the computer.
I did it once without signing into my Adobe ID but then I signed in and no difference.
I created my Adobe ID on a different computer using Photoshop but not sure if that is relevant at all or if even the Adobe ID is relevant.
Any suggestions?
I know I can save to PC first and then upload (which is what is happening now as I type this) but I would like to remove one step if I can and have it work the way it was designed.This is probably due to the setting in PrE for Online Sharing, and your YouTube account. I would check the info for each very closely, to make sure that everything is set up properly. Also, from time to time, YouTube has made major changes in their accounts (not that long ago, they decided to go through a department of Google - not sure if they still do), and if you're on, say an extended YouTube account, then it might be that PrE has not yet caught up to those. Do not know if PrE 10 still has the old 10 min. limit, but that was the case, until YouTube started offering extended accounts.
Good luck,
Hunt -
I cannot get FIOS TV online to work
I am a Fios TV, internet, and phone subscriber. I am signed into my FIOS account online (I can pay my bill, view my services, etc), but FIOS TV online doesnt work. It tells me "Get FIOS TV" as if I am not already a subscriber.
ANy ideas?it's usually tied to your email account ID. Is your email different than your ID that you use to pay your bill?
-
I recently changed my apple id to a new email at the same time getting a new Iphone 5. I cannot get all my devices back online with icloud since. It is still showing my old email even though I changed it and logged in under the new one. My icloud information is grayed out for the apple id.
You need to sign out completely in System Preferences (or Settings)>iCloud and then sign back in again with the new ID. Your iCloud data will disappear when you sign out but will reappear when you sign back in (may take a bit of time).
-
Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.Get Adblock or GlimmerBlocker.
-
I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?
Here's a good troubleshooting article about imessage "waiting for activation".
http://support.apple.com/kb/TS4268 -
I cannot get my iPhone 4S to connect to iMessage n FaceTime have tried all the tips online and it's still not working ? It's just saying waiting for activation
What tips have you tried so far? Just so we don't waste our time telling you things you've already done.
When you respond, also indicate which country and carrier you're using. Also, is your phone brand new? can you make a phone call / access the internet while on cellular? -
Every since I did the newest update I cannot get online.
Everysince I downloaded the newest version for the Ipod touch I cannot get online. It just keeps circling next to the wifi. It says im connected in my settings but when I go to get online it wont allow me to, it says I'm not connected. Also I'm having issues with my home button not working right either. Help someone please!!!
reset all settings
settings- general- reset - reset all settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
try imessage again
if issue persists backup info and restore via itunes
Peace, Clyde -
While online at a web site, filling in important forms, the screen suddenly fades to one side and disappears, and I cannot get it back, forcing me to start all over again. How can I stop this from happening?
The entire web screen of the form page I am filling out slides to the right and disappears, seemingly under a previous form that was not yet filled out, but I can't find it to retrieve it. I suspect this wireless mouse might be causing it? In general I find going back to a previous web page to be very awkward compared to windows. I always get this message, do you want to submit this form again? In windows, I could use a pull down arrow from my browser bar to locate a previous page. Maybe Mac isn't for me.
-
Cannot get smtp online, all info for email provider correct
I cannot get SMTP online on a POP email accout. All settings confirmed with email provider....any ideas?
Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again. -
Cannot get online with netbook
We upgraded to Infinity but now I cannot get online on my netbook. The icon and wireless connection panel indicate I am connected by when I launch my browser (IE) it says unable to display webpage. My husband managed to get online by using Openzone but this is not very satisfactory when we are paying for Infinity. Our OS is Windows XP.
Hi Jady and welcome
It's good you've got on line with Openzone, I presume from your own signal... checks that wireless connectivity is working between your Netbook and HH3.
If you go to your HH3 you can pull out a useful plastic card/tab which has your wireless code on it.
Then with your Netbook click on your wireless icon... probably bottom right and click on your wireless name.
This should say something like connect, enter in the wireless key exactly as shown on your tab/hub settings card.
And it should connect.
I removed the BT Help Desk software off my XP PC as it caused connection problems... kept saying connection failure did I want it fixed... say yes and click on the picture of the HH I was using then it went and connected.
I didn't have this problem on any of my other machines so as this XP PC was the only one with the BT software I removed it as it is uneccessary and the problem never re-occured.
A useful wireless scanner that's free http://www.metageek.net/products/inssider/ will show your home signals and
can help identify a clear or least used channel you can moved your HH3 from it's Automatic setting to this least congested channel.
Video here http://www.youtube.com/watch?v=pf2kZCfYTxI It's the older version 1 but similar. You get a list of your signal and all your neighbours along with a time graph showing their signal strengths... the lower the number the stronger the signal is.
Mine is around 40 to 50, a picture in my post HERE showing my signal is the strongest and my neigbours which is on a nearby channel is weaker.... If it was the same signal strength I would move my HH3 wireless setting off the Automatic setting and set it to a clearer channel.
Let us know how you get on... I'm using a Win 7 laptop but have the PC running win XP upstairs and could go thru the exact log in process if you still have probs.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR) -
Please help me!
I have a copy of PS CS6 which I purchased from Adobe but I don't have the activation code!!
I cannot get anyone to help!
I have made several calls and online chats, but no one seems to get it.Thank you for replying. Yes I deleted the old email address..
-
I cannot get subtitles on my new smart tv. I've read all the solutions online and none of them work. When I try to airplay the BBC i player by mirroring my iphone 4 the subtitles disappear when I change from iphone to apple tv.
That's because the BBC iPlayer app uses basic AirPlay to show the content, this means the original content is sent to the Apple TV for it to decode rather than mirroring the screen of the iPad where the subtitles are added.
-
I need help getting the iMessage feature to work. I've done the fix that is shown online several times and still cannot get it to work. Are there any other suggestions out there to fix this problem?
HI,
What was "the Fix" ?
Where was it On Line ?
So your iPhone is on a Wifi network ?
You have gone to Settings > Messages and Enabled Messages.
You cannot then send iMessages from your iPhone Number ?
You should be able to sent to other iOS devices that are using other iPhone Numbers or Apple IDs or to Macs that are running Messages with the iMessages account enabled and those may also be using iPhone Numbers or Apple IDs depending how they were set up.
On the iPhone in Settings > Messages you can then add an Apple ID
You can then chose to Send from the Apple ID or iPhone number as the Start from option.
Adding the Apple ID links the Apple ID and iPhone Number and if you have a Mac, and are running Messages with the same ID, they will sync (Display on all Devices) all the subsequent iMessages you receive.
9:27 pm Thursday; December 26, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Maybe you are looking for
-
Incoming Text Messages Allocated to Wrong Contact
I recently recieved my Zed10 back from warranty repair for an out of the box malfunctioning headphone port and am now experiencing an issues a thousand times more frustrating. The phone is now having issues when I recieved a text message in which it
-
Hi, sorry if this is a silly question, but when I'm viewing my desktop on the home computer from work (as in I've connected by finding my computer in the finder and hit the "Share Screen" button - is there any way to turn off the display at home? It
-
Most of my CDs have the tracks mixed so there is no break in between songs. I would like to be able to convert these CDs into a single track to keep the flow of the music. Is this possible with iTunes, and if not can someone direct to a program it is
-
#define precompilation errors in Pro*C
Hi I wrote a Pro*C program in which I used #defines to create a global value. I used this in my oracle variables. When I precompile it, it says that the value is not defined. Can anyone help me to overcome this? here is the syntax I used. #define USE
-
Upgrade to CS4 and (only) three questions
Bridge does not open automatically with PS even though I have told it to do so every place I can find. Some tool tips -- especially the icons at the bottom of palettes -- do not show themselves. The tool tip option in preferences isturned on. I use t