Cannot get to setup ... advanced options on e2000
once I setup the router .. i tried to get back into setup pgm and I couldn't get to any of the options. I did not enable any any special securityoptions just took the defaults on the install
You might have installed the Cisco connect software on your main computer. Open the Cisco connect software. Click on Router settings and go to Advanced settings. It will open the setup page of the router.
If you have not installed the Cisco connect software on the computer then you can try to open the setup page using the default IP address of the router. Connect the computer to the Ethernet port on the router. Check the IP address and default gateway of the computer. Default gateway is the IP address of the router. The default IP address of E2000 router is 192.168.1.1.
Open the internet browser and in the address bar type http://192.168.1.1. Log in to the router setup page.
Similar Messages
-
I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features l
I am using AI CS2 on an eMac and cannot get the print menu options to recognize the print features like? I need to use mirror feature and high quality printing and it will not work.
jdanek
It is an eMac. I have a corrupted font book. How can I fix/re-install/or download a new font book app? Most fonts that were in it work, some do not, but I cannot open it nor can I install fonts into it. This happened after the eMac OS was upgraded from 10.3.9 to 10.4.11 and AI was upgraded to CS2
Kind regards,
Steve Mosher
Village Graphics LLC
438 Troy Loop
The Villages, FL 32162
352-409-6853
[email protected] -
I cannot get my "send link" option under the File menu to work. Nothing happens. I went under Tools, Options, Applications and set it to my Gmail but no luck. No error messages, but the Gmail window never launches.
Phillipp,
I tried it again using "save link as", and this time it actually worked! I just now downloaded several more using the "save link as" option, and it works perfectly. Thanks. Problem solved.
Littleberry -
Installing Elements 10 cannot get past setup wants to make changes to my password
I am installing Elements 10 to my macbook but cannot get past setup wants to make changes type my password but goes no ferther
Hi martha ross,
The installer is requiring the Admin permissions to write the system files.
Please enter the Mac password that you use to login on the Mac to continue with the installation.
Regards,
Rave -
Cannot get past setup. WebOS Dr not working
Hello everyone.
I am ready to get my money back on this thing so this is my last attempt to get it working.
About me: 30 years of computer knowledge so I know how to follow directions.
Tried 4 of the 5T's several times, but cannot get WebOS doctor to run
Cannot get past setup on the touchpad so I don't know my webOS version
Have read every troubleshooting guide I can find
No WebOS account because I cannot get that far.
Been working on this for 3 days
My setup:
Windows 7 x64 sp1
Java 1.7
4GB ram
500GB HDD
Found a link to WebOS Dr without an account form tis forum, but it would not run. Got error MSVCR100.dll missing. Got the file and put it in systemWOWx64. File was alrady in systemx86. Also put in folder with WebOs Dr app.
No error, but no joy either. Then read another post that sent me to
http://www.webos-internals.org/wiki/Webos_Doctor_Versions#Wifi_Only
Donloaded latest version 3.0.5 WIFI omly. Don't know my actual WebOs version because I can't get past setup.
What happens on setup:
Selcet language = ok
select network = ok
enter network key = ok
load User agreement = never happens becaue after about 10 minutes I get "server Error" that takes me back to the begining. I have done this process about 30+ times.
Also, must note the toughpad takes 5-6 minutes just to come on. The longest I have ever waited for anything to boot up.
Update: Contacted seller, WebOS ver. 3.0, 32GB Touchpad
Post relates to: HP TouchPad (WiFi)kattwoman42 wrote:
My setup:
Windows 7 x64 sp1
Java 1.7
4GB ram
500GB HDD
I think this might be your problem. Java 7 is only a developer preview right now and not ready for mass consumption yet (info about that is here: http://www.java.com/en/download/faq/java7.xml) Any chance you can try using the latest version of Java 1.6 and run webOS Doctor again?
Also, the webOS Doctor file should be a .jar and not a .rar. Some browsers have been known to mix up the extension so try heading to http://www.webos-internals.org/wiki/WebOS_Doctor_Versions, finding the version for your product, and right-clicking + selecting "Save As..." -
I cannot get the Apple ID option of resetting my -forgotten password- up. MacBookPro. OS X LION.
How to proceed?
Christian.dkUse Disk Utility whihc is in the Utilities Folder.
Select your Boot Disk on the left.
Select Verify Permissions
If any errors the do Reapir permissions.
You might have to repeat the process.
see this:
Steve -
Cannot get AirPlay Mirror option to work on my Iphone. Updated Apple TV and IPhone. I only see the airplay app button, but not the mirror on/off toggle. Any suggestions?
AirPlay: iOS and Mac
-
My Iphone 5s is not responding to anything. The screen is completely blank and I cannot get it to do anything.
Hi ChristineKehl,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
I hope this information helps ....
- Judy -
I cannot get my Admin utility to detect my base and I do not know why. Please help
The issue here is that AirPort Utility in Mountain Lion 10.8.x will no longer support the older versions of the Express.
If you have been thinking of adding a newer faster AirPort Express, now would be a very good time to do this.
If you want to continue to use the older Express, there is a special workaround that will allow you to install a version of AirPort Utility on Mountain Lion that can be used with your Express.
See this article for more details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
As you might imagine, this is not officially supported by Apple. It does work for me, but there is no way to know if it will work well for you. -
I click on certain links in Ebay and nothing happens. I cannot update my inventory or add products due to this not working
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
HT201335 I cannot get the airplay mirroring option to display on i pad 2
How do i get the mirroring option to display on my i pad 2? I can get airplay but cannot mirror bbc i player etc only get the sound.
You need to connect to iTunes on a computer to update. Direct updates were enabled with IOS 5. I hope you were maintaining a backup of your computer. If you attempt to sync with a new one without transferring content first then all will be erased.
You also need to update the Apple tv to version 5.0.2 (4.4 being the minimum for mirroring support) -
Cannot get to startup menu options
Hi there,
I bought a used HP Pavilion g6 series notebook, but turned out that it has a password, so I created a CD to overpass it, the thing is that cd is not stating by it self on startup, so I tried to go through the startup menu and change Boot device options, and here was the problem !! I have to press F9 to Access it but its not working , I tried all other options on the startup menu but nothing is working. What can I do !! pls help, I'm not an expert and don't understand big words, so pls take it easy on me when you answer : ) .
Thank you in advanceAfter 3 failed passwords do you get a code???
If you do post the code.
Let us know.
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
I have tried everything to get into iTunes without putting on a credit card. Has anyone found a way in? Even icloud doesn't work for me.
You can create an iTune and App Store account without credit card details
1. Sign out of current Apple ID if you are sign-in to one (important)
2. Go to App Store and select a free app
3. Tap INSTALL APP
4. Create New Apple ID
5. Confirm Your Country
6. Agree with Terms and Conditions
7. Fill in your Apple ID and Password (you must create a new Apple ID; don't use your old Apple ID)
8. Create and answer your secret question
9. Select NONE for Payment Method
10. Fill in Billing Address
11. Submit application for new Apple ID
12. Wait for verification email
13. When email arrive, verify your account
14. Start downloading your free apps -
Cannot get to advanced options on Airport Extreme
My new Airport Extreme is connected to my new MacBook Air and I have an internet connection. I'd like to get to the advanced options as described on page 24 of the Airport Extreme instruction booklet but have not been able to do so.
It says "Choose the wireless network you want to change. On a Mac, use the Airport status menu in the menu bar." I don't know what that means.
I have the Airport Utility running. It shows the internet and the Airport Extreme. I highlight the Airport Extreme graphic and click Base Station in the menu bar, but it does not show Manual Setup as an option, as it seems it should.
By the way, there's a red circle with a "1" in it next to the Airport Extreme graphic. What does that mean?
Thank you.My new Airport Extreme is connected to my new MacBook Air and I have an internet connection. I'd like to get to the advanced options as described on page 24 of the Airport Extreme instruction booklet but have not been able to do so.
It sounds like you are using version 6.0 of the AirPort Utility. The instructions on page 24 are actually referring to the 5.x version of this utility. You can download the lasted (5.6) here.
Please try those instructions again after using the 5.6 version. If you still have issues or questions, please post back. -
Datastore Export "Advanced" Options Button grayed out
Hello,
We're trying to export a job from a Development repository to a QA repository using the DataServices Designer from BusinessObjects DataServices 4.2 SP1. When we get to the Datasotre Export Options screen, I need to get to the advanced options, but the "Advanced" button is grayed out. Is there some setting to make this button available? Or is there perhaps a permission that I can assign to make it available?
We're using MSSQL 2012 on a Windows Server 2008 R2 Enterprise.
Thanks,
Mary MoonHi Mary Moon,
You can change the owner of the table or the connection properties of the datastore using advance button but I am not sure if this is really required to be enabled in case of SQL Server. Technical Manual does not say anything specific related to databases. I assume that since we are passing the connection details while exporting and the only thing might change is the Owner of a table which can be done manually as well.
Regards,
MS Ansari
Maybe you are looking for
-
How do I safely stop a Time Machine Restore midway through?
I started a Time Machine restore from backup at about 1pm this afternoon. After about 15 minutes of estimating the size of the files to be transferred, it gave me a 19hr estimate for transfer time. I had heard that it could take awhile, so I wasn't t
-
Internal table value checking in custom table using SQL...
I have a table which has following fields: X1 TABLE (ZCONfig custom table) LIFNR land1 123 br 234 br 456 br 567 Gr and X2 TABLE: (Internal tabl
-
How to escape "&" character ?
I want to execute the following statement in sqldeveloper select '&sdfas' from dual and expect the outcome to be the string "&sdfas" but sqldeveloper keep asking me for the value of "sdfas" argument, and replace it. I use sqldeveloper to run sql scri
-
I opened a file in TextEdit. I saved it as Plain Text, but left it open. When I returned to edit the file again, it had "garbage" characters at the top and at the bottom. Instead of just closing the file without doing another save, I edited out the g
-
Devices in profile manager not showing
I have profile manager set up and I have tried to enroll the device, but it does not show in the devices panel. I want to use profile manager to manage the devices, not so much the users. These macs are on a cart and they are bound to active direct