Cannot Get Tutorial Builder to Work

Hi,
I am running CS5 on a 64-bit Windows 7 PC. I think I have followed all of the instructions properly, but I do not see Tutoorial Builder in the Extensions dropdown menu.
Here is what I did.
1. I downloaded both the Tutorial Builder Vers. Preview 2 and the Tutorial Player
2. I copied the scriptlistener.8li file from the scripting/utilities folder to the Adobe Photoshop/CS5/Plug-ins/Automate folder for the 64-bit CS5 program. The instructions read install and activate the scriptlistener plug-in. Have I activated it in this step with the copy process?
3. I double clicked on the unzipped Tutorial Extension file I downloaded. The CS5 AEM ran and seemed to install the Tutorial Builder in both CS5 64-bit and CS5 32-bit.
4. I double clicked on the downloaded Player AIR file and it appeared to install ok.
5. I restarted CS5 64-bit program, but the Tutorial Builder is not listed under Windows > Extensions.
I tried to redo the appropriate steps for the 32-bit version of CS5 with the same results.
I then deleted the scriptlistener.8li file from Automate folder as suggested.
What have I missed or what did I do wrong?
BTW I had to look on different links to put the above instructions together. I would be nice if all of the steps including those on how to handle the scriptlistener were in one spot. I have never done this sort of thing in CS5.
TIA

Ablichter & Alexanderdavid,
Thank you both for your replies. I have it working now. The reason why I deleted scriptlisterner from my Automate folder when I was done trying it out was because the documentation suggested that. Otherwise it would keep capturing steps generating a large file. I would just copy it in again whenever I would try to run Tutorial Builder.
Here's how I got it to work. I had done the installation properly (the manual approach) etc, but I know nothing about using scripts in CS5. In snooping around I found and did the following.
I clicked on File > Scripts > Scripts Events Manager. In the dialog that opened, I checked the box that says Enable Events to Run Scripts/Actions. That did it. Now Tutorial Builder runs. I have written/used Actions without this box being checked. I have no idea what it does or how it is used, but by putting the check mark there, things work right.
I don't think it was mentioned in the documentation. If it was I missed it.
Now the fun begins to actually play with the tool.

Similar Messages

  • I cannot get folio builder to work in CS6 InDesign.

    I cannot get folio builder to work in InDesign. I have updated InDesign and uploaded a new all language CS6 plugin for InDesign apps but still the program says I don't have the necessary files and redirects me to the plugins I already downloaded. I am not certain what is wrong.

    DPS questions should be asked in the DPS forum. I've moved your question there.

  • Cannot Get Animated Buttons to Work in DPS (InDesign 6.0) Help Please!!

    In DPS tips, using the iPad app, some of the navigational buttons appear like SWF buttons, but, I cannot get SWF buttons to work in DPS. I have been trying with Multi-States, but, cannot get that to work either. Can you tell me how to get a SWF like button to work in DPS - I'm working with ID 6.0.
    Do you have an eaasy answer? Is there a tutorial out there I can view? Is their a step-by-step I can read?
    BTW, I do understand how buttons work and the types of events that work in DPS.
    Thank you
    Lain Kennedy

    Hi Uwe,
    First, let me say "I cannot even believe all the wonderful information I have recieved from my original post," and, I want to thank you for your understanding.
    I have been a designer for many years, working before the computer, and, since the mid 80's working with a variety of software to produce both print and web projects. I must say, I am biased on the Adobe Creative Suite, and, have had amazing success with these tools.
    Nonetheless, I have been working with DPS for about a month now (and a month does not make a career), and, have to admit, I am looking at DSP as a Hybrid between Print and Web. Yet, it is neither print or wed, it is it's own element, and, I'm just having growing pains learning, especially the terminology.
    Yes, I am trying to explain SWF Buttons, when in reality, it is DPS Buttons, and, my thinking is based on print and web. Now, it is - in some ways - like going back to school learning DPS and DSP terminology. It is a bit frustrating, but, I know I will get it.
    Now that I have looked at my first MSO test, I followed the instructions in DPS Tips, I realize that the Button is in the "Normal State" as I (interact, this is my terminology) touch or hover to make the button work. It is in the "Click" state that the Button triggers the MSO to work, and, I finally get that now - okay, I'm slow to learn. And, I will be building a complex MSO to prove the point to myself.
    I was wondering, besides DPS Tips, are there any books, apps, specific sites that are very specific on "ALL" the things one can do with DSP? 
    Again, thank you and, all the folks who have taken their time to respond to my post. All the information is truly appreciated.
    Sincerely,
    Lain Kennedy

  • I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I have installed Mountain Lion 10.8.2 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    You can go to the Apple online store and purcahse a copy of Mountain Lion.  This will give you a redemption code, which you can use to download Mountain Lion from the App Store.  Unfortuantely, I'm not aware of any other way to legally purchase it.  I have never seen Apple release Muontain Lion on DVD.
    In terms of Apple Service, they just need the serial number of the machine to check the purcahse date.  It is usually correct, to within a few weeks.  A quick Google search should give you the correct number to dial.
    I hope this helps.

  • I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I have installed Mountain Lion 10.8.1 but still cannot get email from my work exchange account. I'd appreciate any help.  Thank you.

    I would delete the account and try to re-enter it. Also, you have to let your firm's IT department know that you want to sync work email on your personal devices before they actually work.

  • I cannot get GPS Only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX

    It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off).  Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi,  it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)?  Any ideas on how to get iPad working with GPS only??

    Roger that.  Thanks for your time.
    System:
    Windows 7 64bit
    Processor: AMD phenom IIX4 965
    RAM:  Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
    GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
    PSU: Kingwin 1000W laser gold (LZG-1000)
    Yes. tried the one ram stick, no go.  I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install.  I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3.  Yes I can see the Vertex 3 Drive as well as the WD drive at this point.  some times I have to hit "scan" a couple of times.

  • HT2240 I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6

    I cannot get my registration to work for QuickTime Pro for Mac OS X 10.6.8 using QT 7.6.6  I have copied and pasted exactly as require (I don't have an organization).  Any suggestions?  Thank you!

    There is no QuickTime System Preferences pane in 10.6.8 or later.
    You enter the registration under the player 7 menu.

  • I cannot get airport extreme to work. Can you help me?

    I have a G5 Power PC. I recently purchased a macbook and an Airport Extreme. I cannot get the airport to work. Can somebody help me please??
    G5 Power PC and macbook   Mac OS X (10.3.9)   new OS X on Macbook

    I plug the ethernet from the airport to the back of the modem (a Webstar unit) from my cable provider. Then I plug the other cable from the back of the airport into my G5. Then plug in the power cord. I get lots of flashing lights - "thinkin & blinkin", but then I get a message that it cannot locate the server. Even rebooted. I've been waiting for the IT guy to call/email me back me back but no response yet. I'm guessing I may just need a new location, but I'm not wired to think IT-like (I'm a very right brained graphic designer), I I don't want to screw anything up.
    Do I need to just go through a new internet setup?
    G5 Power PC and macbook   Mac OS X (10.3.9)   new OS X on Macbook

  • I cannot get wireless mouse to work in windows 7 using bootcamp

    I cannot get wireless mouse to work in windows 7 using bootcamp

    OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

  • Cannot get exception-type to work

              WLS 60 SP1 (#101616)
              Cannot get <exception-type> to work. WLS shows standard &#8220;Internal error
              500&#8221; page instead of a custom error page. The custom error page is shown
              if <error-code> is used instead of <exception-type>.
              Any ideas? Thanks
              

    Hi @utopian,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
    Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
    Hope this guide helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Cannot get iTunes DJ to work

    No doubt it is something really obvious that I'm missing, but I cannot get iTunes Dj to work. If I click on iTunes DJ in the left column, right section of the window says "iTunes DJ" and explains that I can make a continuous mix, but there is no list of music. The play button is greyed out.
    The help file says "To select a specific playlist (instead of your library) for the live mix, choose an option from the Source pop-up menu at the bottom of the iTunes window."
    but there is no Source pop-up menu at the bottom of the iTunes window.
    Any ideas?

    Do you see the grey bar at the bottom of the screen when you select iTunes DJ, the one with the Settings and Refresh button, as seen in the picture on this web page? If not, then the bottom of the window may just be off the screen on your system so you don't see the Source selector. If that does seem to be the problem, try changing the resolution of your Mac's screen (Displays system preference) to the highest resolution. If it already is, try changing it to a lower resolution, then back. That may get the iTunes window to reappear..
    If not, open the Script Editor application, paste in the following text (up to and including the line that says "end tell") and click the "Run" button:
    tell application "Finder"
    set {d1, d2, d3, d4} to (get bounds of window of desktop)
    end tell
    tell application "iTunes"
    set margins to {d1 + 10, d2 + 54, d3 - 10, d4 - 148}
    set bounds of window 1 to margins
    end tell
    If the iTunes window is running off the screen, that should restore it.
    Hope this helps.

  • Cannot get wireless scanner to work

    wireless printing to my HP Officejet Pro 8500 works fine but I cannot get the scanner to work - it fails to even communicate with the HP device. My operating system is Windows Vista. The error message I get when trying to use the scanner by clicking on the "HP Officejet Pro 8500 A910 Scan" icon is "Scanner communication cannot be established."
    Thank you for your help
    This question was solved.
    View Solution.

    Hi @utopian,
    Welcome to the HP Forums!
    I understand that you cannot scan with your HP Officejet Pro 8500 on Windows 7 using a wireless network. I am happy to look into this issue for you!
    Please take a look through this scanning guide, A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning for HP Officej....
    Hope this guide helps!  
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    I have recently upgraded to mavericks and I cannot get my scanner to work.  I tried deleting the printer and reinstalled it but no luck

    Canon does not support the MP530 on Mavericks, they have not produced drivers and apparently do not intend to,

  • Cannot get screen sharing to work long distance...

    I set up an AIM account for my mother-in-law so that I could remote screen-share her MacBook and help her with learning how to use it and trouble shoot it (it's a Late 2008 Aluminum MacBook hand-me-down from my wife).
    I've set up the account, but cannot get remote screen sharing working. Screen sharing works fine over bonjour, but no go over the internet using AIM. I can control my wife's MBA from my iMac and vice-versa, but neither of us can control her MacBook. When we choose "Ask to share users screen...", we get the pop up window stating "Waiting for response from user", along with the spinning gear icon. If she chooses "Share my screen with...", the pop up window appears on our Macs and we're able to choose accept. But then the pop up window switches to "User would like you to share his or her screen" and just sits there. Nothing happens. On her screen, she gets the message "waiting for response from user" and nothing else happens.
    After a long wait, my screen will say, "There was a communication error during your chat. Messages didn't receive a response from..." and gives me the option to report the details to Apple.
    What am I doing wrong?
    Her MacBook is running Mavericks, as are our machines.
    Message was edited by: pmpknetr21
    Message was edited by: pmpknetr21

    Hi,
    @mac.com and @me.com ID works as AIM Screen Names  (you add them like they are and existing name) but only if you are using Messages 7 or 8 plus later versions of iChat 6 in Lion.
    You should be able to use the Apple Issued IDs in Mavericks.
    If you using an AIM Registered name try using it without the @AIM.com or @AOL.com suffix (User Name only)
    As AIM can "read" the Apple Database it will think the Apple IDs exist already but may not tell you that is the reason you can't re-register them.
    Can you post the info being sent to Apple here ?
    However stop the log after about 10 lines of the Binary Images (I will not need it all).
    9:28 pm      Sunday; August 3, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    I just updated my iphone to IOS 7 and cannot get my imessage to work, it keeps saying "waiting for activation" nothing i have read online has helped me try to fix the problem. why is it doing this and how can i fix it?

    Here's a good troubleshooting article about imessage "waiting for activation".
    http://support.apple.com/kb/TS4268

Maybe you are looking for