Cannot get Unity 8.0 to syncronize with Active Directory
Hi All,
any help/advice will be greatly appreciated here. Pulling my hair out on this one. So we installed our CUC 8.0.2 a few years ago. At the time, CUC was setup to sync with LDAP, our windows AD. Filters were defined, etc. All has been fine until recently. Unfortunately I cannot define recent - not sure when this started. I normally don't deal with CUC, but I am now. Basically we either modify or add users in AD and they are not showing up in CUC->users. I actually have 1 user where this person took over for another and in CUC/users half their info is the last user and half is the new user. Weird stuff.
I don't know what the issue is. To my knowledge nothing has changed either in CUC or AD. I attempted a wireshark sniff only to find out that infact LDAP queries were successful from my unity server to domain controller.
I then turned on dirsync on one of the unity servers, looked at the logs using the RTMT and specifically dealing with the user above, I see that unity successfully queries AD and AD cleary responds with the user attributes. But even in the log it states that nothing has changed with the user. I went a head and changed some of the attributes on the user that are mandatory in our CUC setup, performed another sync, and still no change.
I have 3 domain controllers, 2 unity servers (sub and pri). No matter which unity server I attempt the sync from or which domain controller I list as #1 on the list in the CUC setup, no changes are made. This is really frustrating. I have 1 windows 2008 R2 DC and 2 windows 2003 DC's (at present time) each is also a GC.
I rebooted both unity servers (utils system restart) waited a while after the first server rebooted came back online before I did the second. Still no change.
Can anyone suggest where I can look to find the answer as to what is going on?
thank you in advance for any ideas.
Renaming a Cisco Unity 8.x Server or Moving a Cisco Unity 8.x Server to Another Domain
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/8x/upgrade/guide/8xcurug080.html
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
Similar Messages
-
I'm using a pc, (windows 8.1,) and I cannot get a thick and thin line with CS6. I want to draw, but I cannot get any linework like I should. I also use Sketchbook Pro, and ToonBoom, and I get wonderful linework. But not with Photoshop.
None of the brush tool settings have any effect, even in the preview. Is there a setting I need because I'm using a pc and not a mac?Thanks for your response,
I'm using a Fujitsu T901 laptop, with a stylus pen. Painting works great in Photoshop, but for drawing there is no sensitivity at all. Frans Vischer
author and illustrator of Fuddles, A Very Fuddles Christmas and Jimmy Dabble
www.fransvischer.com
pamperedfatcat.wordpress.com -
I cannot get my iPad 2 to work with VPN provider.
I cannot get my iPad 2 to work with my VPN service provider. Using OS 4.3.3. iPad purchased in the USA. Have heard there are issues with iPad 2 and VPN support. Any suggestions?
You can try this ... hold down on the sleep button and the power button at the same time for about 10 seconds until you see the Apple logo on the screen, release the buttons and see if the iPad restarts and you can use it.
-
I cannot get my audio memos to download with my pictures
I cannot get my audio memo to download with the picture from my cannon gs9 camera
Hello silent george,
This may be due to iPhoto or Aperture not having been reinstalled on your system.
What do I need to use My Photo Stream?
To use My Photo Stream you need an iCloud account, compatible devices, and up-to-date software:
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
Cheers,
Allen -
Is iOS 6.0.1 Killing anyone's battery life. No change other than installing iOS 6.1 today...now I cannot get 5 hours of battery life with everything disabled!!!
This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.
-
restored iphone from icloud so I could have all my old photos but now I cannot get it to restore or sync with itunes either by cable or by wifi. I have tried with automatic download off/on, I have had red circles, hours of syncing, nothing, help!!
Seems to be a common issue in discussions. Try this:
http://support.apple.com/kb/ts1538
And let me know if it helps, -
Apple id lost. Cannot get Access to it. Started with a mail from apple id saying that apple id and password were changed. Did not sent such a request myself. Since then no acces to apple id, not even via forgot my id site. It says that my apple id and birth date details do not match. Something is obviosly totally wrong. Got a visa card recently, is that the reason? Cannot get a new apple id with my real address as the systems says its already used. Pls help, I am vey frustated that this can happen.
Best regards
Laus LausenCall Apple account security via the telephone for your country
http://support.apple.com/kb/HE57 -
I cannot get my iPhone 5c to connect with my tomtom 600
I cannot get my iPhone 5c to connect with my tomtom go 600
Did you find this page?
https://www.tomtom.com/en_gb/services/connect/#tab:tab2 -
I cannot get my address book to merge with iCloud?
I cannot get my address book to merge with iCloud?
Yes, the settings all appear to be correct on the Info page in Itunes. I have contacts checked to synch, calendars and mail accounts but only the contacts are not moving to the Iphone.
-
Getting the "cannot get mail, password is incorrect" message with my AOL account only.
Getting the "cannot get mail, password is incorrect" message with my AOL account only. Could this have something to do with the iOS 7 update? When I log into my mail through safari it's fine, and I deleted it from my phone and went to go add it back but now I can't because it keeps telling me my password, which is correct, is incorrect. Has anyone else had this issue since iOS 7? How can I fix it?
I have had issues of "password incorrect" and mail not being sent, after doing the latest IOS 8 update to both my iPhone and iPad. I tired all the different suggestions I found (deleting and re-adding my AOL account, changing my password, etc) and nothing fixed it until now! While searching around for a solution, I happened upon a post from someone. I tried doing this to all three of my AOL email accounts (on both my iPhone and iPad) and now it works great! Here what that post said to do:
"1. Set up your AOL account(s) using the AOL option
2. Go into each AOL account(s) and under the "Outgoing Mail Server" section, press the SMTP entry
3. Set the "Primary Server" to "Off"
4. Press "Add Server" and provide the following information in the "Outgoing Mail Server" section
a. Host Name - type in: smtp.aol.com
b. User name - type in your user name WITHOUT the "@aol.com" - that was the problem/change!
c. Password - type in your password
d. Use SSL - On
e. Authentication - Password
f. Server Port - 587 (mine automatically set it to port 587)
After you enter in the above info, the Primary Server will still be set to OFF, but the new server you set will be set to ON, just doesn't show up in the Primary Server section. Be sure to do the above steps for each one of your AOL accounts (if you have multiples ones).
Apparently, in the main AOL Account Information section you need to use your user name and the "@aol.com", but you need to leave the "@aol.com" out of the SMTP. However, the Primary Server has that whole section grayed out so you need to ignore that one and create another one."
Good luck! Worked for me and now I am as happy as a Lamb!! -
I cannot get my Canon MX410 to work with my new computer. Computer is Acer Aspire One.
Cannot get my Canon MX410 to connect with my new Acer Aspire One.
Hello.
Please download the latest Windows 8 drivers from our website. You can visit the following link to download the drivers:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx410#Dr...
If these troubleshooting steps do not work, feel free to call us at 1-800-OKCANON.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
When booting up I cannot get past the light blue logo with spinning disc. I have tried it with the install disc and using different keystrokes, i.e. "shift, s, c, o, " please advise. thank you in advance.
The system on the original install dic is probably looking for the original video card.
It may be possible for someone with the right skills to make an install disc for you with the driver for your new card.
As I recall from my early days of being a Macuser, If you held down a key, (spacebar?), while starting it would open a dialog to take you through a monitor setup. -
Problems with Active Directory and Windows 2003
Hello,
I'm using Mac OS X Server 10.4.9 with Active Directory bound to a Windows 2003 Active Directory Domain. I can bind successfully to the domain using the graphical interface. Then in Samba I can access shared directories using Windows users. However, after some time somehow there are problems and Windows users aren't authenticated anymore on the Mac. I've looked at the firewall and there are no denied packets from the Mac. There are two servers in the domain, all clocks are synchronized and domain information is up to date. When I unbind the Mac, I can see the machine account being deleted on both domain servers and created too on both machines when I bind to the domain.
Problems occur when I try login in using ssh or samba do I think this is a problem with the AD module.
I turned on debugging messages on DirectoryServices:
sudo killall -USR1 DirectoryService
When in Windows, using the Administrator user I try:
net use \\10.0.0.1 /user:domain\Administrator
Where 10.0.0.1 is the Mac.
In the Mac I get from
tail -f /Library/Logs/DirectoryService/DirectoryService.debug.log |grep ADPlug
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:37 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:37 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:37 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:37 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:37 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:37 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:37 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:37 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:37 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User administrator
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing domain\administrator
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=domain\\administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Searching domain domain.com.mx for User ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing DOMAIN\ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=DOMAIN\\ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=administrator)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=ADMINISTRATOR)(sAMAccountName=ADMINISTRATOR)(dis playName=ADMINISTRATOR)(mail=ADMINISTRATOR)(userPrincipalName=ADMINISTRATOR)(use rPrincipalName=ADMINISTRATOR@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RealName
2007-06-27 10:48:38 CDT - ADPlugin: Adding Search for Attribute displayName containing ADMINISTRATOR
2007-06-27 10:48:38 CDT - ADPlugin: Did DC search with queryFilter = (&(objectCategory=cn=person,cn=schema,cn=configuration,dc=domain,dc=com,dc=mx)( displayName=ADMINISTRATOR)), limit 1
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: 16784372 - Put 0 records in Buffer for AttributeValueSearch
2007-06-27 10:48:38 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:38 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:38 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Calling GetRecordList Routine
2007-06-27 10:48:38 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:38 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:38 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:38 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:38 CDT - ADPlugin: 16833877 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:38 CDT - ADPlugin: Calling CloseDirNode
2007-06-27 10:48:42 CDT - ADPlugin: Calling OpenDirNode
2007-06-27 10:48:43 CDT - ADPlugin: Opening Specific Node domain.com.mx
2007-06-27 10:48:43 CDT - ADPlugin: Calling GetRecordList
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Calling GetRecordList Routine
2007-06-27 10:48:43 CDT - ADPlugin: Search Records called in ADSWrapper
2007-06-27 10:48:43 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-06-27 10:48:43 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=administrator)(sAMAccountName=administrator)(dis playName=administrator)(mail=administrator)(userPrincipalName=administrator)(use rPrincipalName=administrator@*)))
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-06-27 10:48:43 CDT - ADPlugin: Returning 0 Results
2007-06-27 10:48:43 CDT - ADPlugin: 16833881 - Put 0 records in Buffer for RecordList
2007-06-27 10:48:43 CDT - ADPlugin: Calling CloseDirNode
I really don't know what to do. The Windows Event log shows no messages. The link used to work and there have been no changes in the domain servers.
The key line seems to be:
2007-06-27 10:48:43 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
But I don't know what that ADSEngine.mm is.
XServe G5 Mac OS X (10.4.9)Hello.
Thanks for your reply.
I tried the net use with a drive letter with and without the /user switch. When I use a domain user domain\user1 I can't connect. When I use a user local to the XServe it works.
When I use
net use x: \\10.0.0.1\share /user:domain\user1
I get prompted for a password, but it doesn't work.
I checked the firewall and all packets to or from the mac are accepted, no denied or dropped packages.
I already went through the MS document on fw ports. Before I opened to Kerberos ports the binding failed. No the binding work OK.
Some users who were authenticated yesterday still can access files using the Windows domain accounts. It's new users trying to connect those who have problems.
This is what the Samba log.smbd log shows:
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:45, 2] /SourceCache/samba/samba-100.7/samba/source/smbd/sesssetup.c:setupnew_vcsession(662)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
[2007/07/04 14:58:46, 0] /SourceCache/samba/samba-100.7/samba/source/auth/authutil.c:make_server_infoinfo3(1138)
makeserver_infoinfo3: pdbinitsam failed!
[2007/07/04 14:58:46, 0] pdbods.c:odssamgetsampwnam(2329)
odssam_getsampwnam: [0]getsam_recordattributes dsRecTypeStandard:Users no account for 'user1'!
[2007/07/04 14:58:46, 2] /SourceCache/samba/samba-100.7/samba/source/auth/auth.c:checkntlmpassword(367)
checkntlmpassword: Authentication for user [user1] -> [user1] FAILED with error NTSTATUS_NO_SUCHUSER
This is what the DS log shows:
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Calling GetRecordList Routine
2007-07-04 14:58:46 CDT - ADPlugin: Search Records called in ADSWrapper
2007-07-04 14:58:46 CDT - ADPlugin: Searching attribute: dsAttrTypeStandard:RecordName
2007-07-04 14:58:46 CDT - ADPlugin: Locating User with Query (&(objectCategory=person)(|(cn=user1)(sAMAccountName=user1)(displayName=user1)( mail=user1)(userPrincipalName=user1)(userPrincipalName=user1@*)))
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Failed getting credentials at line 2687 in ADSEngine.mm
2007-07-04 14:58:46 CDT - ADPlugin: Returning 0 Results
2007-07-04 14:58:46 CDT - ADPlugin: 16892201 - Put 0 records in Buffer for RecordList
XServe G5 Mac OS X (10.4.9) -
Issue with Active Directory User Target Recon
Hi ,
I am facing an issue with Active Directory User Target Recon
My environment is OIM 11g R2 with BP03 patch applied
AD Connector is activedirectory-11.1.1.5 with bundle patch 14190610 applied
In my Target there are around 28000 users out of which 14000 have AD account (includes Provisioned,Revoked,Disabled accounts)
When i am running Active Directory User Target Recon i am not putting any filter cleared the batch start and batch size parameters and ran the recon job .Job ran successfully but it stopped after processing around 3000 users only.
Retried the job two three times but every time it is stopping after processing some users but not processing all the users.
Checked the log file oimdiagnostic logs and Connector server logs cannot see any errors in it.
Checked the user profile of users processed can see AD account provisioned for users
My query is why this job is not processing allthe users.Please point if i am missing some thing .
thanks in advanceCheck the connector server load when you are running the recon. Last time I checked the connector, the way it was written is that it loads all the users from AD into the connector server memory and then sends them to OIM. So if the number was huge, then the connector server errored out and did not send data to OIM. We then did recon based on OUs to load/link all the users into OIM. Check the connector server system logs and check for memory usage etc.
-Bikash -
Single Signon and Integration with Active Directory
Hi,
We have a requirement to integrate Active Directory with SAP and implement Single Signon solution. Our Active Directory is running on Windows 2003 and we are having systems 4.7 , ECC6.0 which run on Linux OS in our landscape.
Can anyone of you help me by answering following questions
1. Is there any need of any third party solution(tool) to integrate Active Directory and SAP and activate single signon?
2.Is there any difference in integration from SAP 4.7 and ECC6.0 of SAP on Linux OS with Active Directory ?
3. If possible please share any documents or links on above issue.
Suitable answers will be rewarded with points. Thanks in advance for your help
Regards
Murali> Thank you very much for providing me the link. But the document on link seem to be in German. Can you please let me know how to get English version of this document.
I'm sorry, you'd have to ask Realtech for that document in English.
Basically you can follow
http://osdir.com/ml/encryption.kerberos.general/2004-11/msg00007.html
Markus
Maybe you are looking for
-
What is the best way to restore my iMac, when I forgot my administrator password?
I forgot my passwords and the Apple store restored it to factory settings and it was fine. Now I did it again. What can I do besides bring it to the Apple store.
-
Purchase requisition got deleted in the sales order..
Hi All, I got stuck up with an issue in AFS. The issue is that after creating a P.O with the help of a TAB order,the user has assigned a rejection reason at the item level in the sales order. Then again the rejection reason was removed and now the pu
-
IdeaCentre K210-Soyo Monitor and Display Adapter
Hi I have a Soyo Monitor -Dylmo17b. I just received an update and my graphics driver got changed to Intel G33/G31 Express Chipset Family. But ever since Soyo went bankrupt I don't have a driver for the monitor and there's a driver for it but its gen
-
Authorization to inhibit the drilldown of a Free Characteristic in a Query
Hi all I have a problem: I want to implement authorizations profiles for two different roles linked to two users, in order to allow the execution of a query from Bex Analyzer. The Query contains the free characteristic "A", which is an authorization
-
PolicySet Invalid: WSM-02557 (Error when try to run a deployed BPEL process)
Hello All, I have a BPEL process deployed and it accepts a file which is configured through File Adapter as the input for the process. But whenever the process tries to read the file (the file is places in a physical path within the weblogic server)