Cannot get USB port to work after re-installing of SP2 on Satellite Pro L20
After re-installing XP Home SP2 and downloading all the updates & Drivers from here I cannot get my USB port to work properly, if I have more than one peripheral plugged in it says "Bandwidth Exceeded".
I have a Behringer BCD2000 which is a souncard/midi controler for DJ mixing, it worked fine before i reinstalled windows, now it clicks and pops when playing tunes, also the ASIO doesn't work when I run Traktor (Dj software) and the program freezes. Any other external sound card wont work either. I've been all through the device manager no conflicts apart from an ! over Serial under hidden devices.
I'm lost, is my only option buying a PCMCIA sound card, it worked fine before so surely there is a software solution to this?
If anyone can help I'd be most appreciative.
Hello
Try to disable USB Error Detection:
1. Right-click My Computer and then click Properties.
2. Select Device Manager to view the Device Manager
3. Locate and click the Universal Serial Bus Controller entry.
4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer?
Similar Messages
-
I am on my 2nd time capsule and cannot get usb port to work
I have replaced my old Airport Extreme with an with a 2TB Time Capsule. Everything worked except the USB port. I worked with Apple Tech Support and we determined the USB Port wasn't working so I took the 2TB Capsule back and they were out of 2TB models, so I came home with a 3TB Time Capsule. Everything works except the USB Port. I have tried printers, USB hard drives, Flash Drives, etc. to no avail. What am I missing? I know I didn't get two Time Capsules with defective USB ports.
The port is under powered.. this is often the experience people have.. you need to use a powered hub to get things to work. Why they worked on Gen1 and not Gen4 no idea.. but your experience is not unusual.
The TC is also pretty picky when it comes to hubs.. so not everything works even then.
Are you running SL as per your info..? That should be no problem but for Lion you need to download airport utility 5.6 to even see what is connected. There also could well be some issues in 7.6 firmware for the TC. -
Usb ports not working after mavericks install
After installing Mavericks on my mac pro the usb ports are not working for my printer or other usb drives. the only item i can get to be seen via usb is an apple optical mouse. any suggestions would be great.
Hi there grnded189,
You may find the troubleshooting steps in the article below helpful.
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
You may also want to reset the PRAM and SMC as well.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
-Griff W. -
HP G4-2275dx left two usb ports not working after OS install.
Hi all.
I had to remove my windows 8(Upgraded to Pro before) install due to compatibility with certain programs and I was not very satisfied with the results.
So I had an extra cd key for windows 7 x64 home premium.
Everything went smooth.
I had all my drivers installed.
I installed Direct X also.
But when I tried to use my tutle beach headset it would not install the driver for the headset or even make the sound when a device is mounted.
So I checked device manager and I saw three yellow excelemation errors.
two were "Universal Serial Bus(USB) controller"
one was "SM bus controller"
I have installed the catalyst drivers multiple times but no dice.
Any help will be appreciated.
Happy Holidays.
This question was solved.
View Solution.Hi,
Download and install the Chipset driver from the following link.
http://support.amd.com/en-us/download/chipset?os=Windows%207
When done, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Please help me I am getting whatever is attached to usb port is not recognized and there are no drivers. I thought maybe I should go thru my computer and clean out any excess. Computer PC and O/S Vista Home Premium. When I installed apple to set up sync it worked right away. As I am a PC person should I uninstall and then reinstall all of the software, iTunes updated & sync iPod. Thank you in advance for any help any of you can give me.
What are tags?You said:
"whatever is attached to usb port is not recognized and there are no drivers."
This imples that your computer does not see any device, not just the iPod when it is connected ot a USB port. This points to a major problem with Windows or a hardware problem. Use the WIndow's troubleshooting to get the USB ports to work. -
1 of 2 USB ports stopped working after 10.7.2 upgrade
I have the newest Macbook Pro. I upgraded to 10.7.2 today and immediately after, 1 of my 2 usb ports stopped working. Thought it may be the cable, so I switched cables. Tried plugging in my iPhone, my portable drive and nothing. Both work on the other port though. Both ports worked fine before the update.
I've rebooted 4x.
Suggestions?Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
USB ports not working after OSX 10.9.1 update
I have a late 2011 MBA 13".
The 2 USB ports stopped working as soon as I updated to 10.9.1.
I tried zapping PRAM and resetting the SMC.
I even turned the thing off for hours and still nothing.
Any idea how to fix?
Everything was fine until I did the update.
Thanks.This is not a known bug affecting 2011 MBA computers with 10.9.1 so there is something wrong with your installation. Since zapping PRAM and resetting the SMC did not work I suggest that you try one of two things but first make sure you have backed up your computer.
1) download Mavericks and reinstall it. Sometimes an update goes awry and a reinstall fixes it. Since doing this won't disturb any of your data or applications it would be my first choice. You'll be downloading 10.9.1 so you won't have to perform any updates.
2) boot into the recovery mode, erase the hard drive and then download and install Mavericks. Once Mavericks is finished installing you'll be asked if you'd like to migrate data and applications from a backup. Say yes and if your backup drive isn't already connect it, do so. Select your applications folder and account folders from the list and let the Setup Manager do its magic.
BTW - this is why one of my several backup hard drives is a cloned backup using Carbon Copy Cloner (SuperDuper! Is another good choice). I can boot up my computer using this backup and download the newest version of Mavericks on it if I haven't already done so. I always quit the installer first and make a copy of it because the installer program deletes itself once it is finished which is something of a pain. It gives me more options including being able to boot my computer with it, erase the computer and copy the installer to the computer rather than having to perform the download all over again if step 1 fails. Since I always download a new copy of the OS when Apple releases an update this computer will have the newest version of the installer so I also can skip the download step of option 1 and just copy it over and install on the computer. -
USB Ethernet port not working after ML install
After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.
Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011). -
Right USB Port stops working after disconnecting device since 10.9.2
Hi,
Since updating to 10.9.2 the right USB port on my MBA stops working after diconnecting a device (tested: external hard drive, USB flash drive, USB HSPA Modem). The only way to get the port recognizing the device on that port is to do a restart. If the device is connected from starting the MBA it works fine, if I then eject the drive and reinsert it or a different USB device the device doesn't get recognized. The devices do get power, my WD passport ultra spins up just fine, the USB HSPA modem also indicates it's working (with signal) but nothing shows up in finder or diskutility. If the modem is connected from start (and thus working) and then disconnect from the internet but not remove the drive I can reconnect to the internet. The problem only occurs after disconnecting the device. The port becomes inactive. The left USB port works as expected.
Steps I've taken:
Disk Persmission
PRAM
SMC
Reapplied the 10.9.2 update
Sent feedback to Apple
Some Output:
Boot Mode: Normal
Total CPU usage:
User 11% System 10%
Max %CPU by process (name, UID, %):
WindowServer 0 4.6
Loaded extrinsic kernel extensions:
at.obdev.nke.LittleSnitch (4052)
com.driver.JRDUSBModemData64 (4.0.5)
com.protech.NoSleep (1.3.3)
Loaded extrinsic daemons:
net.sourceforge.MonolingualHelper
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.freemacsoft.appcleanerd
com.adobe.fpsaud
at.obdev.littlesnitchd
Loaded extrinsic user agents:
com.oracle.java.Java-Updater
at.obdev.LittleSnitchUIAgent
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.oracle.java.Java-Updater.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.freemacsoft.appcleanerd.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
net.sourceforge.MonolingualHelper.plist
/Library/PrivilegedHelperTools:
com.freemacsoft.appcleanerd
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
net.sourceforge.MonolingualHelper
Extrinsic loadable bundles:
/System/Library/Extensions/JRDMassStorageDriver32.kext
(No bundle ID)
/System/Library/Extensions/JRDMassStorageDriver64.kext
(No bundle ID)
/System/Library/Extensions/JRDUSBModemData32.kext
(com.driver.JRDUSBModemData32)
/System/Library/Extensions/JRDUSBModemData64.kext
(com.driver.JRDUSBModemData64)
/System/Library/Extensions/LittleSnitch.kext
(at.obdev.nke.LittleSnitch)
/System/Library/Extensions/NoSleep.kext
(com.protech.NoSleep)
/Library/Audio/Plug-Ins/Components/A52Codec.component
(com.shepmater.A52Codec)
/Library/Internet Plug-Ins/Flash Player.plugin
(com.macromedia.Flash Player.plugin)
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
(com.oracle.java.JavaAppletPlugin)
/Library/PreferencePanes/Flash Player.prefPane
(com.adobe.flashplayerpreferences)
/Library/PreferencePanes/JavaControlPanel.prefPane
(com.oracle.java.JavaControlPanel)
/Library/PreferencePanes/NoSleep.prefPane
(com.protech.NoSleepPref)
/Library/QuickTime/AC3MovieImport.component
(com.cod3r.ac3movieimport)
/Library/Spotlight/LogicPro.mdimporter
(No bundle ID)
Library/Address Book Plug-Ins/SkypeABDialer.bundle
(com.skype.skypeabdialer)
Library/Address Book Plug-Ins/SkypeABSMS.bundle
(com.skype.skypeabsms)
Library/QuickLook/Pacifist.qlgenerator
(com.charlessoft.pacifist.qlgenerator)
Library/Services/Clip to Day One.workflow
(No bundle ID)
Login hook:
/Library/Scripts/Hooks/login.sh
Global login items:
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
$HELPER_PATH
User login items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
Safari extensions:
Shut Up
AdBlock
SafariKeywordSearch
Disconnect
MapTricks
Restricted user files: 28
Font problems: 0
Elapsed time (s): 130
etrecheck output:
Hardware Information:
MacBook Air - model: MacBookAir3,1
1 1.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:20
Disk Information:
APPLE SSD TS064C disk0 : (60.67 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 59.81 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
EFI (disk2s1) <not mounted>: 209.7 MB
Radha (disk2s2) /Volumes/Radha: 1.81 TB (1.73 TB free)
disk2s3 (disk2s3) <not mounted>: 189.89 GB
Boot OS X (disk2s4) <not mounted>: 134.2 MB
FireWire Information:
Kernel Extensions:
at.obdev.nke.LittleSnitch Version: 4052
com.driver.JRDUSBModemData64 Version: 4.0.5
com.protech.NoSleep Version: 1.3.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] at.obdev.littlesnitchd.plist
[loaded] com.adobe.fpsaud.plist
[loaded] com.freemacsoft.appcleanerd.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
[loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
[loaded] at.obdev.LittleSnitchUIAgent.plist
User Launch Agents:
User Login Items:
iTunesHelper
Sparrow
Sort Menubar Items
AppCleaner Helper
SurplusMeterAgent
3rd Party Preference Panes:
Flash Player
Java
NoSleep
Internet Plug-ins:
Default Browser.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
User Internet Plug-ins:
Bad Fonts:
None
Top Processes by CPU:
12% com.apple.WebKit.Networking
6% Safari
4% WindowServer
3% EtreCheck
2% hidd
1% Terminal
1% notifyd
1% opendirectoryd
1% com.apple.WebKit.WebContent
0% Dock
Top Processes by Memory:
147 MB Safari
137 MB com.apple.WebKit.WebContent
49 MB mds_stores
29 MB com.apple.WebKit.Networking
27 MB TextEdit
23 MB WindowServer
20 MB Disk
20 MB Sparrow
20 MB CVMCompiler
18 MB Finder
Nothing out of the ordinairy. Thanks for any helpIt's an Apple Pro keyboard and mouse, the dongle is
plugged into the Mac and not the keyboard. The same
set-up is, and has been working on all our other
Macs.
The sleep issue sounds interesting- hum, maybe...
Is your keyboard plugged into one of the USB connections on an Apple monitor? If so, you may want to change that connection to one that is on the G5 itself. My monitor came with a warning note indicating that problems will likely occur if the keyboard is connected to the monitor.
I also had a problem with the automatic sleep function. After much trouble-shooting and a logic board replacement, it was concluded that coming out of the automatic sleep function with any USB device active would freeze the entire USB bus. After disabling automatic sleep in system preferences, I've had no freezing problems. My machine works fine with the manual sleep function in the Apple Menu.
AndyH -
Help, 10.6.8 update, all usb ports stop working after 10hrs
I've been running 10.5.8 for ever and finnaly tried to update to 10.6.8.. After I did it, the usb ports all kick out any connected devises after around 10 or so hours. I ran of the install disk, using disc utillty, disk repair, and repair permisions a few times and it did not help.
I did the install a few times again to try to see if it would help and didnt.
i tried an erase and install and migrated everything over from my orignal back up external drive that is running 10.5.8 and issue is still there.
My old 10.5.8 back up external drive works fine and does not have this issue, and I have been using that as my start up drive instead and working from there. But that is not really a solution and a temp work around.
Any suggestions would really help. thanks!I have a early 2008 macbookpro 2.8 duel with silver keys.
I purchaed the 10.6 disk from the apple store. I've had the machine for years and purchased it refurbished from apple.
I did the erase and install and migrated everything over from external drive, then did update to 10.6.8 and the usb ports still would stop working after a few hours.. Then I read on another apple community forus to reset pram, and pull out the power cable, take out the battery and hold power key for 5 seconds, then restart. that seemed to fix usb issue so far..
But overall my computer seems to be running slower then when using just 10.5.8 and it did not wake from sleep once and I had to force power off and restart.. But maybe its just getting used to 10.6.8. we will see..
Also, on another note, my battery is totally dead, and I can only run computer with power cable.. Will this affect things? it never did with 10.5.8..
Oh, on my erase and install, I just did the simplest version and did not do the full erase to zero using he advanced security measures.. I just did the one where it writes on top of everything.. -
Qosmio F750 - Cannot get some functions to work after Win 8 uprgade
I own a Qosmio F750-125, PQF75E.
Since I upgraded to Win 8, utilizing Toshiba Upgrade Assistant I might add, I had some issues.
Most importantly not being able to get my Toshiba Blu-ray player to install.
Eventually I managed, still don't exactly how but anyway, to install the latest version 1.0.0.5.70A.
The problem now is that the 3D function still don't seem to work.
When I open a 3D movie I only get the picture to display side by side, despite clicking on the 3D button.
I tried to update the Nvidia driver (v290) to the latest version v314, available on Nvidia site, for for my GeForce GT540M graphics card but every time I get a message that the driver cannot find compatible driver hardware. Eventually from within the upgrade files downloaded by Toshiba Upgrade Assistant I managed to install the v306. I am still however unable to install v 314, after the "system check" I still get the message that the driver can find compatible driver hardware.
However, the 3D still does not work. I notice that the face detection (SuperD Xtune) does not automatically start with the Blu-ray player when I launch or open a 3D file to be played by the Toshiba Blu-ray player, as it used to.
How can I get my Blu-ray Player to play my 3D properly again.
If I open Xtune I am able to calibrate the 3D and then it closes.
I do not see a app under all apps which seem to have anything to do with the face detection function.
Is there a setting that need to be changed, an additional driver to be installed or what?
I am really disappointed with the support I have received from Toshiba themselves on this issue.
I also wanted to update the BIOS of my laptop.
My bios version is 2 dating December 2011 but I notice that a newer BIOS is available from Toshiba Website dating February 2012, if I am not mistaken.
I downloaded that but when I run it I receive a message that my computer is not compatible.
**bleep** this is frustrating.
I want to get my 3D function back and be sure to run the latest and most appropriate drivers, at all times.Dear Tonny
Thank you for patiently answering to my posts.
You are right, despite extensive notes in the Toshiba Step-by-Step upgrade guide and specific mention that the Blu-ray player can only be installed by using the Upgrade Assistant, it is not installed by the Toshiba Upgrade Assistant.
I am not sure though whether it actually did form part of the downloaded files but never the less I installed it by some miracle manually.
It did not want to install at first. I received a message that the player could not be found. I noticed that the player is a sMedio Inc player and I then searched sMedio Inc and download their WinDVD Pro player. After that the Blu-ray driver from Toshiba installed.
I also have it that v1.0.0.5.70A is the latest driver but through my local Toshiba Agent (MUSTEK) I received a driver from Germany and it was 1.0.0.5.48. I have not installed that as yet.
I am convinced that the problem lies with the interaction between the Blu-ray Player, Nvidia driver and SuperD software.
I searched my installed files and saw that I have Super D spd2900g and Super D X-tune installed. I uninstalled both and tried to re-install it form the file included in the Toshiba Upgrade Assistant (Super D IC Driver).
However only the Super D spd2900g part installed and the Super D X-tune part is now missing.
NOW I am completely BUGGERED because I do not know where to find the X-tune program to reinstall it.
SuperD's website is very basic, in fact somewhat primitive.
Thanks you also for the links, I have seen them somewhere and have had regard thereto but they are outdated.
They relate to much older versions and windows 7 not 8.
I must be honest, the poor response and support from Toshiba will most definitely lead to me not buying their product again. None of the so called technicians have help me achieve anything. I struggled and figured out everything myself so far.
I still also have no answer in respect of the BIOS upgrade issue. Is there no one I can contact directly. -
Usb port not working after yosemite update please help
ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
Anonymous UUID:
CCC4DCA9-48E9-4692-250B-488588FCC69E
Sun Nov 9 17:58:17 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
Backtrace (CPU 0), Frame : Return Address
0xffffff8031663b80 : 0xffffff8029f3a811
0xffffff8031663c00 : 0xffffff802a005eb2
0xffffff8031663cf0 : 0xffffff802a0065e5
0xffffff8031663d50 : 0xffffff8029fb6b4a
0xffffff8031663e60 : 0xffffff8029facd2c
0xffffff8031663e90 : 0xffffff8029f5c747
0xffffff8031663ed0 : 0xffffff802a3c45ff
0xffffff8031663f40 : 0xffffff802a3c425c
0xffffff8031663f50 : 0xffffff802a44dcb2
0xffffff8031663fb0 : 0xffffff802a03ac46
BSD process name corresponding to current thread: suhelperd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:
0x0000000029c00000
Kernel text base: 0xffffff8029e00000
__HIB text base: 0xffffff8029d00000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 7052072843826
last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver 1.0.12 (addr 0xffffff7fac6ba000, size 16384)
last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7fac717000, size 16384)
loaded kexts:
com.huawei.driver.cdc_ncm 2.7.2f16
com.huawei.driver.dc_net 1.0.2
com.huawei.driver.cdc_acm 2.6.2f17
com.huawei.driver.cdc_usb_bus 1.0.3
com.huawei.driver.HuaweiDataCardDriver 4.25.45
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.ApplePolicyControl 3.7.21
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHD3000Graphics 10.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0
com.apple.driver.AppleBacklight 170.4.12
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 97
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
Serial ATA Device: ST9320325ASG, 320.07 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: Hub
USB Device: HUAWEI Mobile
USB Device: IR Receiver
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, 20080d.0I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them. The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
Any Help out there?
Hardware Information: ℹ️
MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
MacBook Pro - model: MacBookPro11,3
1 2.3 GHz Intel Core i7 CPU: 4-core
16 GB RAM Not upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 1:43:41
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad -
I have a 2011 MacBook Pro.
All I remember doing was accidently unplugging my Wacom 4 Drawing tablet.
(I am really thinking about getting one of those Wireless ones... hopefully that's provide a bit more comfort.)
Anyways. I go to plug it back in as I have always done.
Then a flash message popped up and the the system stopped allowing me to use the USB port.
The other port works just fine.
I can switch to bootcamp and then both USBs work again.
(I only use bootcamp if I want to play a game that requires Windows to run it. Otherwise I prefer my Mac Side for things like drawing, editing, animating, etc.)
I haven't a clue where to navigate to.
My first choice was system preferences. But there isn't even a hardware option.
Any clues would be great.Hello
Try to disable USB Error Detection:
1. Right-click My Computer and then click Properties.
2. Select Device Manager to view the Device Manager
3. Locate and click the Universal Serial Bus Controller entry.
4. Double-click Universal Host Controller and then click the Advanced tab of the Universal Host Controller Properties.
5. Put a checkmark in the box for Disable USB Error Detection. Click OK.
6. Restart the computer to see if "Bandwidth Exceeded" message occurs again
Did you use recovery media to reinstall WXP? When someone write it worked before and now not it is really not easy to say why this happen. Try to configure notebook as before and maybe it will work again. Behringer BCD2000 is not known to me and I dont know how it works and which software must be preinstalled there.
Can you use different USB devices like external HDD, USB mouse, USB memory stick or printer? -
HT1529 Usb Ports dont work after Mountain Lion?
I recently updated my macbookpro to Mountain lion Os X and now whenever I connect a Flash drive to my usb port it doesnt work. I connected my iPad and iPodtouch and it still charges from the usb port, but it doesnt connect to iTunes. Anyone have an idea on what is happening here?
I have a Mid 2010 Macbookpro 13 inch, I upgraded Snow Leapord to Mountain LionI would reinstall:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Usb ports stopped working after windows 7 install - pavilion g6-1001sa
After reinstalling windows - My usb ports have completely stopped working - not recognised at all - These happened previously and I was able to download and install a driver which worked - I have been unable to find it this time
thanks
JO
Please helpteethinnit wrote:
I had tried here - the correct driver was not here - it is the USB controller that I am looking for
Ok go to your search bar and type "Change Device installation settings"
and look at my screen shot and this change should make it look for the latest driver.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-
Maybe you are looking for
-
How do I increase volume significantly
I have video I recorded on VHS tape from tv, transferred it to DVD, and onto my iMac, into iMovie. I want to upload these to YouTube, but the volume is very low. I know how to double the volume, but would like to still make it much higher. I suppose
-
I am getting occasional problems with a custom idoc that is being passed to a BPM process. The idoc is passed to a BPM process. The BPM vefifies that the content is valid for purposes, and if it is then passes it on to a second receiver determination
-
How to set Application Language in JHeadstart Generated Applications
Hi Everybody, We have developed an application using jheadstart 10.1.2 and (UIX/Struts/BC4J). I have a table for users preference and I want to enable users to choose their desired language. For example, If user select "Arabic" as his preference, app
-
Adobe PDF Converter Login Problem
We purchased an annual subscription for Adobe PDF Converter but my login today tells me there is a problem
-
<IMG height= alt="" src="http://forums.creative.com/i/p.gif" width= border=0> I have had the MuVo TX FM 52 for alsmot three months now. Just recently the player has stopped working when I plug it into the power source. I push the pwer button and the