Cannot get Xbox Live to report NAT Open whatever i try.

Hi,
Ive read everything i can find on the internet about the latest Airport Extreme Base Station and Xbox Live and I cannot for the life of me manage to get the Xbox 360 to report "NAT - OPEN" during tests. Worst still it always comes back as NAT Strict.
I used to have an old Airport Extreme (the dome one) at my old place and the NAT was always Open on that and i dont even remember opening ports.
Ive checked all the threads and suggestions on this forum and nothing is working.
So far, i given my 360 a fixed IP both on the 360 itself, and then on the Airport Extreme by using the 360's wired MAC address. Ive checked that the IP is outside of the DCHP range which it is, and ive power cycled both devices many times and the 360 will always connect to the static IP ive set it up on - so that works.
Ive port forwarded all the ports Xbox Live needs (88 and 3074) and set them to its static IP - this didn't work.
Ive set the static IP of the Xbox 360 as DMZ (default host) and this didn't work either.
Ive power cycled my modem, my airport extreme and the 360 - this didn't work.
Ive unplugged everything from my Airport Extreme apart from the 360 - this didn't work.
I cannot see what else it could be, everytime I do the tests it reports back as strict.
My BeBox modem is definatly in bridge mode as all other port forwarding is working correctly for all software and hardware devices.
I personally cannot think of anything else as there really are not that many options to play with - and all ports are set to open for the 360 it should not be reporting as strict...
Can anyone help?

I might add - this is definately an Airport Extreme issue as i just plugged the 360 directly into the modem via Ethernet to get a direct connection and test and NAT was reported as OPEN.

Similar Messages

Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

Cannot get the past dialogue box to open in illustrator since upgrading to Yosemite. Click it but nothing happens. Also File Open works intermittently. Is this a finder preference issue?

one of those days --- it's the PLACE dialogue box

Cannot get a library book to automatically open in adobe digital editions using windows 8

Since getting windows 8, I cannot get a library book to automatically open in adobe digital editions so I can transfer it to my kobo e reader

You could have the issue whereby .acsm files do not get properly registered.
See http://forums.adobe.com/thread/1213041?tstart=0
One solution to may issues with ADE2.0 is to use the more reliable v1.7.2,
Try that and see if it helps.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172

Is it possible to even get xbox live to work

Is it possible to even get xbox live to work on a mac airport extreme 802.11n router, i tried everything i could think of (just so you know i have a d-link wireless router for my xbox) ? If anybody has actually performed this feat please tell me!

My XBOX 360 works perfectly and very fast wirless on Apple Extreme. I do not have security enabled and limit users (basically only my XBOX) by MAC adreess, which is easy in the setup utility. My old Linksys was very jittery when playing NHL hockey online, but now with extreme it is perfect and smooth. Hard core security folks will say you can sniff my network with a MAC address spoof utility, but I know my neighbours could care less about sniffing my XBox traffic....

Cannot get Acrobat Reader or Pro to open PDF IN FF browser

I have a Win7, 64 bit laptop. I have Acrobat Pro X, and Acrobat Reader 11.
I cannot get FF to open a pdf using either of these readers INSIDE the browser. I do not like the internal PDF viewer and I was trying to get Acrobat to render the PDF in the browser. However, whenever I choose acrobat (either one) in options, it will merely download it and open it the application. However, what I want it to do is to open it IN the browser, not in the application.
There is no option for Portable Document Format that includes Acrobat in browser. I had configured it to work properly, but I had to reformat my computer and I can't get it to work again. I have disabled and re-enabled the add-ins for Acrobat, and I still can't get it to work.

Which version(s) of Adobe Reader/Adobe Acrobat do you have? Do you know whether they are up-to-date? I recommend using the product's Help menu to Check for Updates to make sure they are up-to-date.
Then open the Firefox Add-ons page using either:
* Ctrl+Shift+a
* 3-bar menu button (or Tools menu) > Add-ons
In the left column, click Plugins.
Look in the lower section (gray background) for "Adobe Acrobat" and change it from "Never Activate" to "Always Activate".
Then it should become available in the Options dialog.
Does it work?
Also, I noticed you have a NitroPDF plugin listed in your More System Details. In case that one is conflicting, if you don't plan to use it, consider switching it to "Never Activate" when you are on the Add-ons page.

HT1933 I am in the middle of candy crush and I cannot get extra lives....why?

I am playing candy crush and can purchase hammers etc but when I try to get extra lives I am told to go to apple support ..cannot finish my purchase.

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I cannot get adobe 9.3 to stay open. It opens the doc and then gives me a message "MS Visual C ++ Ru

I cannot get Adobe reader 9.3 to keep a doc open.
It opens the doc and then gives me an error "MS
Visual C++ Runtime Library" Appl.asks runtime to terminate in an unusual way.
Problem signature:
Problem Event Name: APPCRASH
Application Name: AcroRd32.exe
Application Version: 9.3.0.148
Application Timestamp: 4b309800
Fault Module Name: MSVCR80.dll
Fault Module Version: 8.0.50727.3053
Fault Module Timestamp: 4889d619
Exception Code: 40000015
Exception Offset: 000046b4
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 1c06
Additional Information 2: 3e8982132dc4aed10ec354e2ccc1b569
Additional Information 3: 72d3
Additional Information 4: c7ffbcbea5b3a5a3e4e867b06398e942
Tom e

Also, sorry -- one more thought:
When I run through the "Troubleshoot compatibility" it tells me that something is incompatible ("issues found: Incompatible Application"). when it asks me, "which version of Windows did this program work on before?" it doesn't give me windows 7 as an option.
Help!

WRT54GS - No Internet when plugged in, but I get Xbox LIVE...

I have Verizon DSL for Internet, and when I switch the Ethernet cable over to the Router, I have no Internet on my computer, but I have Xbox LIVE...?
I'm lost; how do I fix this?

First check the IP when directly connected to the DSL modem in case if its 192.168.1.1 then connect only the computer to the router without the modem connected then change the lan ip of the router to 192.168.2.1 and the power cycle the network i.e. turn off power to modem and router, connect the modem - router - computer, power up the modem wait for the light, followed by the router. This should work. Also make sure that you computer is not set to static IP address.
Start-control panel - network connection - right click local area connection and select properties - tcp/ip properties - It should be set to obtain IP automatically.

Ringtones - I cannot get the Create Ringtone editor to open

I click on the Bell but no editor opens. I try to find Create Rington in the menu and I cannot find it. I have the latest version of iTunes. What am I doing wrong. I have purchased the songs I want to have as ringtones but they just won't work.
I am so frustrated! HELP!

Thank you. You have validated what I finally figured out. I purchased the song I wanted as a ringtone. It did have the bell so it was available. The song downloaded and I did a sync on my phone. Still no ringtone. I finally did go to the purchased folder under Store in the left navigation window. I found the song I wanted to create as a ringtone and I did a right click. Sure enough in the window was the Create Ringtone option. I had to sign into the store again and agree to the terms. Then I had to right click and select Create Ringtone again. Then the editor came up and I was able to create and purchase my ringtone. Hurray!

TS1702 I cannot get apps purchased on iTunes to open on my iPad

I recently purchased Fianl Draft from Itunes and it will not open or connect or anything at all. It is very frustrating. I can see it in my purchases but I cannot access it. No idea why. Help

If you purchased directly on the iPad, it should have downloaded automatically.
Use Spotlight to find the app > iOS: Understanding Spotlight Search

Sup101 cannot get data eventhough the connection shows open when debugging.

Hi,
I am using SUP 2.0,
Created project sup101, generated code for windows mobile,
opened it in visual studio 2008, deployed it,
I get the screen I created and when I try to get the data zero rows are returned. The connection does show as open.
I have tried to look up the ub file and yes that gets created as well, but the recordset comes up with zero rows even though there is a record with that ID 2001?
Can you please help?
Thanks,
PArag.

Check the logs in sybase control center to get an idea about the exact error.

I cannot get i photo 9.5 to open my iPhoto library?

No matter what I try iphoto opens th etool bar but no content, i have to force quit to get out of iphoto, I am on maverick and all software is uptodate.
i have even reinstalled iphot buyt no joy.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

I cannot get the creative cloud application to open.

I cannot launch the creative cloud app. When I click to launch it, nothing happens.
Using Windows 8.1

App doesn't open | Progress wheel spins continually
https://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html

I created a new library (shift-open itunes) but now I cannot get my old itune library to open. Help please

I created a new itunes library on my PC by following the proper procedure. (shift - open itunes-create library). But now i cannot find my old itunes library, so that I can open it. I know my music has not been lost but I cannot acces it. When I open itunes by holding down the shift, it does not show any designation for my old libray. help please.

The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...

Cannot get SQLQueryString from crystal report if no database connection..

Hi,
I am using craxdrt.dll to create a crystal report object.
I want to get the SQLQueryString used in crystalreport even if i dont have databse connection or even database on my local computer.
How can I do this?
Is there any other way to do this without connecting to database?
I just want to read its SQLQueryString Property.
Please Help me.
I am in need of it.

The Clear answer is NO, as I said, only way to get the SQL is to connect to a DB of some type.
As a work around you can get the SQL if you have a dummy database to connect to. But you do need to know what type the report was designed off of or you take the chance of getting incorrect SQL. We can help you a bit here. Using the RDC you can get 2 DB types:
crSQLDatabase or crStandardDatabase, first one is if the report was designed off a SQL database like
MS SQL Server or Oracle etc and the second one is if it's based on a PC type like Access or Dbase. Although if it is PC based there may not be any SQL to get unless the PC DB supports SQL queries. If they don't then no SQL can be returned.
Is there a specific reason why you need to get the SQL?
Thank you
Don

Cannot get Xbox Live to report NAT Open whatever i try.

Similar Messages

Maybe you are looking for