Cannot GR due to the time difference between System Time & Local Time

Hi All,
We are facing any issue where the user can not do the GR as per the scheduling aggreement before 9:00am. We figured out the root cause being the difference btween the system time & local time but we are not sure. The system date is behind a day before 9:00am. For e.g. when it is 1st January 23:59 hrs system time, the local time is 2nd January 08:59 hrs. The system is not allowing GR for the earlier / later date.
Can anybody tell us what could be the issue?
Regards,
Abhijit

Closed

Similar Messages

Exact difference between System status and the user status

Hi,
Please tell me the exact difference between System status and the user status .
how we customize the both in the system
Thanks & Regards
Prajith P
Moderation: Locked. Please, try to find an answer first. See rules of engagement
Edited by: Joaquin Fornas on Feb 23, 2012 11:14 AM

Hi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran.

Difference between system copy and Remote Client copy?

Hi,
Can any body suggest me , What are the major difference between System copy and Remote Client Copy.
As per my knowledge , Both are different
1.In system copy entire data recovered mean copy from Source to target
2.In Remote client copy All Client data can't me import if you choose SAP_ALL profile also
I hope Transaction data and user data can't copied
Anybody share this Question and Give me some idea about this
If anybody give brief explanation that is very gratefull.
regards,
Balaram

Hi,
System copy will replicate all database from source to target system.
In remote copy only client in which you are performing the copy will get refresh. Also, remote client copy will be done between systems on same patch level. with SAP_ALL profile you can bring all data in target system including your transactional data.
Thanks
Sunny

How to calculate the % of time difference between different state

Hi there,
The below query returns the follwoign outptut. I need to calculate the % of time period that a specific state ( state ex: open or closed or all report )exists.
I have to find the time difference between the 2 states . How could I do that ?
The first row shows null for the previous state . How could get actual previous state for the first row?
SELECT si.station_name,
                vppstation.avi_control_state_code.STATE_SHORT_NAME,
                ash.state_id ,
                lag(ash.state_id) over (order by ash.STATE_EFF_DATE desc) previous_state,
                TO_NUMBER(TO_CHAR(ash.state_eff_date, 'SSSSS')) "periods in sec",
                TO_CHAR(ash.state_eff_date, 'dd-mon-yyyy hh24:mi:ss am') "Date"
           from vppstation.avi_state_history ash
left outer join vppstation.avi_control_state_code
             on ash.state_id = vppstation.avi_control_state_code.state_id
LEFT OUTER JOIN vpproadside.stations_installed si
             ON ash.station_id = si.station_id
          where ash.state_eff_date >= to_date('28/02/2010', 'dd/mm/yyyy')
            and ash.state_eff_date <= to_date('03/03/2010', 'dd/mm/yyyy') ;
       group by si.station_name
                     ash.state_id
       order by ash.state_eff_date asc ;
STATION_NAME                   STATE_SHORT_NAME STATE_ID               PREVIOUS_STATE         periods in sec         Date
IRDNCST02                      Open             1                    NULL                  85166                  01-mar-2010 23:39:26 pm
IRDNCST02                      All Report       3                      1                      85159                  01-mar-2010 23:39:19 pm
IRDNCMT01                      Closed           2                      3                      81376                  01-mar-2010 22:36:16 pm
IRDNCST02                      Open             1                      2                      78723                  01-mar-2010 21:52:03 pm
IRDNCST02                      All Report       3                      1                      76023                  01-mar-2010 21:07:03 pm
IRDNCMT01                      Open             1                      3                      55922                  01-mar-2010 15:32:02 pm
IRDNCMT01                      Closed           2                      1                      54931                  01-mar-2010 15:15:31 pm
IRDNCHA01                      Closed           2                      2                      41291                  01-mar-2010 11:28:11 am
IRDNCAS01                      Open             1                      2                      38847                  01-mar-2010 10:47:27 am
IRDNCAS01                      All Report       3                      1                      37947                  01-mar-2010 10:32:27 am
IRDNCST02                      Open             1                      3                      35332                  01-mar-2010 09:48:52 am
IRDNCST02                      All Report       3                      1                      32632                  01-mar-2010 09:03:52 am
IRDNCST02                      Open             1                      3                      31502                  01-mar-2010 08:45:02 am
IRDNCST02                      All Report       3                      1                      28802                  01-mar-2010 08:00:02 am
IRDNCHI01                      Open             1                      3                      25368                  01-mar-2010 07:02:48 am
IRDNCHI02                      Open             1                      1                      23939                  01-mar-2010 06:38:59 am
IRDNCMT01                      Open             1                      1                      20696                  01-mar-2010 05:44:56 am
IRDNCCH02                      Open             1                      1                      13452                  01-mar-2010 03:44:12 am
Edited by: Indhu Ram on Mar 11, 2010 1:34 PM
Edited by: Indhu Ram on Mar 11, 2010 2:20 PM

If you look at the table which is output of the given query , there is column called "STATE_ID" It shows the current state ie open or closed or all report.
The column 'PREVIOUS_STATE' shows the state before the current state. .In the table in 2nd row in previous_state column there is state_id = 1 (open)which is the state before 'all report state'

How can I measure the time difference between spikes (interspike intervals)

I have used NI USB-6008 (DAQ) to sample a continous signal, after sampling I compared the amplitude of the resulted signal with a value. If the amplitude is greater than a specific value (threshold) then it can pass. Now I want to measure the time difference between the resulted samples. The samples look like spikes. (May be if I trigger a timer, then I can measuer the time difference, but I have not seen such a timer).
Thanks in advance,
Saraydin

Oops just occured to me that you are using a 6009 which is not very fast, 48ks/sec, this will not get you very much time resolution and you could have issues seeing much of a 50 us sample. Another approach is to use the counter but you would have to preprocess the spikes to generate a trigger for the counter.
Paul
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

How to calculate the Time difference between 2 dates

HI All,
I am using HR_hk_diff_btw_2_dates to calculate the employee service dates.
For that i am inputing his hire date and Term dates and Output format as '05' i am getting output perfectly....
But problem is whe i am inputting the employee hire date is Dec 1 2007 and Term date is
March 31 2009 It is coming as 1 year 3 months 31 days instead of 1 year 4 months directly .......How could we make it make last date also working day and get the O/p as 1 year 4 months ?Please Advice..
Regard
sas

1. FM for difference betwwen two times:SCOV_TIME_DIFF
Import parameters               Value
IM_DATE1                        2008-01-01
IM_DATE2                        2008-01-01
IM_TIME1                        10:00:00
IM_TIME2                        11:30:00
Export parameters               Value
EX_DAYS                         0
EX_TIME                         01:30:00
2. SD_CALC_DURATION_FROM_DATETIME : Finds the difference between two date/time and report the difference in hours
L_MC_TIME_DIFFERENCE : Finds the time difference between two date/time

Time difference between the Identity system and Access System: OAM

I was installing OAM. Performed the below steps.
-installed identity server
-installed webpass
-setup of identity system console
-installed policy manager
-setup of access system console
The above steps were successfull. Then when i was logging into Access system console, i am getting the below error:
Error:there was a problem obtaining the userid. One possible reason for this is a time difference between the Identity system and Access systems (Policy Manager and Access system console).+
The Identity Server, WebPass and Policy Manager are installed on the same machine.
Userdata repository: OVD 10.1.4.3
Policy and Config Data Repository: OID 11.1.1.3
OAM: 10.1.4.3
Windows2008 - 64bit
Found document in metalink similar to this issue. suggested to change ldapmaxofreties. but didn't help.
Any idea on this error. Please Advise.
Thanks in advance.

Try this::
Check Time Difference Between Identity and Access Manager Systems
Check the logfile in the Access Manager install directory. The default location is <$AMinstall_dir>/access/oblix/logs/oblogfile.
If the file exists and it contains following line "skew = slack = " that means the Identity and Access Manager Web Servers are on different machines and have not synchronized time within a minute.
Either synchronize times between the two machines within a minute's accuracy or you can increase the slack by modifying these two files: <$AMinstall_dir>/access/oblix/apps/common/bin/oblixbaseparams.lst: loginslack: <$IMinstall_dir>/identity/oblix/apps/common/bin/oblixbaseparams.xml: loginslack: where numofseconds is more than skew found in the oblogfile.
For example, if you have following line in oblogfile "skew = 121 slack = 60", set numofseconds in the two parameter files to 130. After doing this, Stop the Identity Manager Web Server. Then stop the Identity Server. Start the Identity Server.
Then start the Identity Manager Web Server. Start a new browser session and see if you get the same error.

Wat is the exact differences between clustered table and pooled table

hi,
can you tell me ravi...wat is the exact differences between clustered table and pooled table
with regards//
anilreddyg

Hi Anil Reddy
Pooled Tables, Table Pools, Cluster Tables, and Table Clusters
These types of tables are not transparent in the sense that they are not legible or manageable directly using the underlying database system tools. They are managed from within the R/3 environment from the ABAP dictionary and also at runtime when they are loaded into application memory.Pool and cluster tables are logical tables. Physically, these logical tables are arranged as records of transparent tables. The pool and cluster tables are grouped together in other tables, which are of the transparent type. The tables that group together pool tables are known as table pools, or just pools; similarly, table clusters, or just
clusters, are the tables which group cluster tables.Not all operations that can be performed over transparent tables can be executed over pool or cluster tables.
For instance, you can manage these tables using Open SQL calls from ABAP, but not Native SQL.These tables are meant to be buffered and loaded in memory, because they are commonly used for storing internal control information and other types of data with no external (business) relevance. SAP recommends that tables of pool or cluster type be used exclusively for control information such as
program parameters, documentation, and so on. Transaction and application data should be stored in transparent tables.
Table Pools
From the point of view of the underlying DBMS as from the point of view of the ABAP dictionary, a table pool is a transparent table containing a group of pooled tables which, when created, were assigned to this table pool.
Field Type Description
TABNAME CHAR(10) Table name
VARKEY CHAR(n) Maximum key length n =< 110
DATALN INT2(5) Length of the VARDATA record returned
VARDATA RAW(m) Maximum length of the data varies according to DBMS
Table Clusters
Similarly to pooled tables, cluster tables are logical tables which, when created, are assigned to a table cluster. Therefore, a table cluster, or just cluster, groups together several tables of type clusters.Several logical rows from different cluster tables are brought together in a single physical record. The records
from the cluster tables assigned to a cluster are thus stored in a single common table in the database.A cluster contains a transparent cluster key which must be located at the start of the key of all logical cluster tables to be included in the cluster. As well, a cluster contains a long field (VARDATA), which contains the
data of the cluster tables for this key. If the data does not fit into a field, continuation records are created.
Field Type Description
CLKEY1 CHAR(*) First key fields
CLKEY2 CHAR(*) Second key field
CLKEYN CHAR(*) nth key field
PAGENO INT2(5) Number of the next page
TIMESTMP CHAR(14) Time stamp
PAGELG INT2(5) Length of the VARDATA record returned
VARDATA RAW(*) Maximum length of the data section; varies according to database system
Working with Tables
The dictionary includes many functions for working with tables. There are five basic operations you can perform on tables: display, create, delete, modify, copy. Please do not confuse displaying a table with displaying the table entries (table contents). In order to display a table, it must previously exist; otherwise the system will display an error message in the status bar. For the following example, the table TABNA is used. To display this table, from the main dictionary screen, enter the table name in the Object name
input field with the radio button selected next to Tables. Then, click on the Display button at the bottom of the screen, or press the F7 function key, or, alternatively,
select Dictionary object Display from the menu.
In this screen, you can see table information such as
¨ Table type, shown next to the name of the object. In the example, it is a transparent table.
¨ Short text description.
¨ Name of the user who made the last change, and the date of the change.
¨ Master language.
¨ Table status. On the screen, you can see this table is saved and active.
¨ Development class. For information on development classes, refer to Chap. 6.
Delivery class, which sets the maintenance group for the table. It controls how tables will behave during client copy procedures, upgrades, and so forth.¨
Tab. Maint. Allowed flag, which indicates whether you can generate a screen for maintaining table entries.
¨Then, on the lower part of the screen, you can see the table fields with all associated characteristics such as:
¨ Field name.
¨ Key indicator. When set, this field is the primary key, or part of it.
¨ Data element.
¨ Basic data type.
¨ Length.
¨ Check table.
¨ Short text, describing the field.
Additional information about the table can be displayed by selecting the corresponding functions from the menu or directly from the application toolbar, such as keys, indexes, or technical settings
Standard table:
The key access to a standard table uses a sequential search. The time required for an access is linearly dependent on the number of entries in the internal table.
You should usually access a standard table with index operations.
Sorted table:
The table is always stored internally sorted by its key. Key access to a sorted table can therefore use a binary search. If the key is not unique, the entry with the lowest index is accessed. The time required for an access is logarithmically dependent on the number of entries in the internal table.
Index accesses to sorted tables are also allowed. You should usually access a sorted table using its key.
Hash table:
The table is internally managed with a hash procedure. All the entries must have a unique key. The time required for a key access is constant, that is it does not depend on the number of entries in the internal table.
You cannot access a hash table with an index. Accesses must use generic key operations (SORT, LOOP, etc.).
Index table:
The table can be a standard table or a sorted table.
Index access is allowed to such an index table. Index tables can be used to define the type of generic parameters of a FORM (subroutine) or a function module.
Just have a look at these links:
http://help.sap.com/saphelp_nw04/helpdata/en/90/8d7304b1af11d194f600a0c929b3c3/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/74/83015785d811d295a800a0c929b3c3/frameset.htm
Regards
Sreeni

The difference between system restore and last good known configuration

hi,
what is the difference between system restore and last good known configuration.
in which situation you use system restore ,and in which situation you use last good known configuration.
very short answer wil be enough.
thanks
johan
h.david

Last Known Good Configuration deals only with Starting Windows eg. a bad registry or incorrect driver is preventing Windows to start.It recovers the registry settings of HKEY_LOCAL_MACHINE\System\CurrentControlSet
While System Restore uses restore points to return your system files and settings to an earlier point in time without affecting personal files. Restore points are created automatically every week, and just before significant system events, such as the installation
of a program or device driver. You can also create a restore point manually.You can undone system restore but there is no such option in Last Known Good Configuration.
Last Known Good Configuration is disabled in Windows 8 or,Windows 8.1 by default.
Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer.
Try using System Restore to return the system to an earlier point in time when things worked correctly.
S.Sengupta, Windows Entertainment and Connected Home MVP

How to measure time difference between zero crossing of a sine wave and rise time of a pulse on a same graph?

I have a 50Hz sine wave and a pulse signal on a same graph. The phase difference between two is between 0-90 degrees.
Now I need to calculate the time difference between (when the sine wave crosses zero volts) and (when the pulse rises). The frequency will stay approximately same for both signals.
The application is for a three phase generator. In simple words, when the time difference between the zero-crossing of sine wave and the pulse rises increases, that means that the load on the generator has increases.
I am a beginner user of LabView (version 9, 2009), maybe it is a very simple problem but I've been pulling my hair out for the last few days and coudln't figure anything out. Any help would be greatly appreciated. I am using DAQ USB-6008 to measure these voltages and pulse from the generator and a sensor
I have attached a jpg (a graph that i just made with excel to explain). The time 't' is what I am trying to measure
Cheers
Awais
Message Edited by awais.h on 03-30-2010 11:20 PM
Message Edited by awais.h on 03-30-2010 11:21 PM
Solved!
Go to Solution.

Hi
Thanks for the code but I'm afraid it won't work. Like you said the probability of choosing a value that is on both graphs may not happen. This is something that I would like the code to do automatically.
But I did use the previous code posted and made some modifications to it and it seems to work perfectly. Now the next thing is to be able to get just that one value that tells you the first time difference.
Here is what I get using that code.
As you can see from the t Values. I only need the one that is highlighted. If there is a way to filter out the rest it would be great.
I was thinking of a while loop and as soon as the value is higher than 3E-5 it would store the number and stop the loop, but I'm not too familiar with arrays in labview.
Here is the the code modified.
As you can see, it wasn't that big of a modification and it still is your code.
I will keep trying.
Thanks for the help
Attachments:
FinalShockSpeed.vi ‏55 KB

Execution time difference between SELECT & UPDATE statement in JDBC Sender.

Hi Experts,
In my scenario, I have used the JDBC Sender Adapter with the SELECT and UPDATE statement.
Now the problem is in between the execution of Select and update statement, few more entries are coming in the same DB Table.
So result of this is updation take place for those entries which are not even picked up by the select statement.
Can we avoid this execution time difference between the SELECT & UPDATE statemet on JDBC Sender side???
Thanks & Regards
Jagesh

Hi
Use serializable option in additional parameters, now all new entries would also be updated.

How to write a query to get the time difference of two varchar type time columns

Hi,
I want to get the time difference between the two varchar type columns.please see the attached image for more details:
My requirement is like:
timestarted
timeended
timediff
9:00:00
10:00:00
1:00
9:15
9:30:00
0:15

Storing time alone as VARCHAR2 value is a incorrect design. Always store it as DATE or TIMESTAMP.
If you already have a messed up design and cant change it, then you need to convert your VARCHAR2 time into a DATE or TIMESTAMP and find the difference. I have converted it to TIMESTAMP and obtained the difference as INTERVAL.
SQL> with t
2 as
3 (
4 select '09:00:00' timestarted, '10:00:00' timeended from dual
5 union all
6 select '09:15:00' timestarted, '09:30:00' timeended from dual
7 )
8 select timestarted
9       , timeended
10       , (timeended - timestarted) day to second diff
11    from (
12          select to_timestamp('01011900' || timeended, 'ddmmyyyyhh24:mi:ss') timeended
13               , to_timestamp('01011900' || timestarted, 'ddmmyyyyhh24:mi:ss') timestarted
14            from t
15         );
TIMESTARTED                                        TIMEENDED                                          DIFF
01-JAN-00 09.00.00.000000000 AM                    01-JAN-00 10.00.00.000000000 AM                    +00 01:00:00.000000
01-JAN-00 09.15.00.000000000 AM                    01-JAN-00 09.30.00.000000000 AM                    +00 00:15:00.000000
SQL>

Can anyone explain the main differences between CRM 2007 and CRM 7?.

Can anyone explain the main differences between CRM 2007 and CRM 7?.
Does CRM 2007 use the WebUI?.
Jason

My fault for not putting my question forward correctly.
I have worked with CRM 7 a few times now, but my experience has jumped me from CRM 5 straight to CRM 7, having never touched CRM 2007.
I now have an opening to work on CRM 2007 so I was intrigued to know what it physically looked like. I assume it does not use the WebUI interface?.
Jas

Hi Friends what are the actual differences between AT NEW & ON CHANGE

what are the actual differences between AT NEW & ON CHANGE ? can you list some of the differences?

Hi,
At New
1. When a new record comes at new triggers. Atnew only used inside loop and endloop.
2. At new is controlbreak statment on at new the left side field change, the event
trigers and the values become 0 and *
On Change
1. On change of works same like at-new but the diff is it can be used out side of a loop,like select and endselect,case endcase.
2.. on change of is not a control break statement and we can use onchange of out side the loop
and
The Major difference between the two is that AT NEW can be used ONLY for INTERNAL TABLES, while ON CHANGE OF can be used for any loop processing i.e do..enddo, while..endwhile and loop..endloop also.
AT NEW <field>
The block will be executed when the SY-TABIX is 1 (or) when the SY-TABIX 1 value has a change with the SY-TABIX value.
With this block the field towards the right to the field are not accessable with in the block, and are shown with '*'. They can be accessed outside the block.
ON CHANGE OF <itab>-<field>
The block also works similar to the AT First. In this block all the fields are accesseble.
ON CHANGE OF triggers whenever there is a change in that particular field.
AT NEW triggers whenever there is a change in the fields before that particular field.ie. if there is a change in that combinations from the first field.
On change off' works on variabels. The 1st time the statement isreached a memory copy is made of the value. The next time the statementis reached, the current value is compared to the stored value. If thereis a difference, the coding between ON... and ENDON. is executed. Youcan use this for a table workarea field, but if you have the table loopin a routine and the routine called several times, you can get unwantedresults. (Check the value of the last loop with the value of the firstnew loop.)
The AT NEW (and others like AT END OF...) are specially for table loopprocessing. The coding between AT new FIELD and ANDAT is triggerdwhenever a the field or any field defined to the left is changed. Yourtable should be sorted by all fields from the left up to the consideredFIELD. Btw all fields to the right contain *, so it can be usefull tohave a second workarea filled to be printed or what ever you want.
REWARD IF HELPFUL
RAAM

How to measure time difference between two continous encoder pulse (PULSE A & PULSE B)

im trying to figure out the time difference between two square
wave pulse (PULSE A and PULSE B) from an encoder. I tried to modify many code but fail to capture thephase difference for each pulse. the
pulse only rise to 5V and fall to 0V like normal square wave pulse
can you and all of experts here help me out with this?
my problem
1) Encoder pulse are continous (pulse A and pulse B)
2) Square wave pulse have "0V" and "5V" please rapidly
if possible someone show me correct method , Im using LABVIEW 7.1 and Hardware NI SCOPE (PCI 5102)
your advice are highly appreciated
among my idea as in attachment , but I failed to get it
Attachments:
Need to Get this wave.JPG ‏34 KB

Hi Amirul,
Check the attached JPG file. i think this will be use full to you
Regards,
Santhosh M

Cannot GR due to the time difference between System Time & Local Time

Similar Messages

Maybe you are looking for