Cannot hear audio on playback

Got a bug report for you here I think. I have multiple clips in a timeline, some clips I can hear audio, other clips I cannot hear audio. I have been using Premiere Pro for 10 years. So, you can skip the questions like, "is the track turned on", or "is it one side of the channel that's not playing". what I can tell you is that it's random. Sometimes the audio comes through, sometimes it doesn't (on the same clip). There are wave forms for the audio in the timeline. And not matter what audio track I put it on, it doesn't fix itself. And like I said, it's random. So, a clip works fine one time, then later when I'm going over the same clips, I can't hear audio on it. Any ideas?????

Check your audio driver.

Similar Messages

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

What version of iMovie is this? Where did this media come from? It's probably in a format or codec not supported by your computer.

Cannot hear audio from internet video. Can hear DVD. Help!

Cannot hear audio from internet video. Can hear DVD. I don't know what I changed in msconfig start up.

Hi,
The first thing I would suggest is to run through the guide by Daniel_Potyrala on the link below to completely uninstall and then reinstall the Flash Player Plug-in.
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/The-solution-to-most-problems-with-the-Flash...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Ipod touch 4gb cannot hear audio

I have a Ipod touch 4th Gen and I cannot hear audio from builtin speaker. I can hear ringtone / notification, but music or Fring requires head phones. Anyone have suggestions. Sound is turned up in settings

try shutting it down, and start it again, or go to "setttings", "general" scroll down, select "reset." nd if tht doesnt work than restore yr ipod

Motion - suddenly cannot hear audio

I must have clicked on something because I was hearing audio just fine & now I cannot. I cannot select the on box in the Audio tab. Here's a pix. I click and nothing happens. Box will not check. Was working fine. What did I do wrong Motion gurus? (I can hear audio if I hit play in the Audio Editor Tab... but only there.)

Fixed. Somehow I got into the Object menu where you solo or lock stuff.... or just make yourself mizerable. I hate this thing sometimes... I mean really hate it.

Attendees cannot hear audio during meeting

After an internal user joins an online Lync meeting they cannot hear the presenter's audio. We have checked the presenters Lync client and verified that the audio and video settings on the client are set up properly. The presenter is using
the Microsoft LifeChat LX-3000 headset.

Hey Do you have the problem only on Meeting? The media flow in meetings is normaly from the client to the front end and from the front end to the clients. Depending on your location the edge can also be into the mediaflow! Check the log on the clients
trace-folder with snooper. You can also have a look into the communication with netmon. If you have access to the firewall check it for drops, but not all drops aren't incorrect. You should validate the communication with the network flow poster! Greets

Cannot hear audio on a presentation created on Powerpoint, but being played on Keynote.

We have a MAC OS X 10.9.3. We have Keynote on our computer. When I download a Powerpoint created by my college professor and play it on Keynote, I cannot hear the audio narration. I have researched this issue on the internet and cannot find a solution. Does anyone have any experience with this?

This depends on which version of PowerPoint created the file, and whether its a Mac or Windows version.
We deal with twelve different versions of PowerPoint coming in from clients, quite a nightmare.
A work around is to use PowerPoint for Mac (obviously), Open Office or Libra Office to obtain the sound file and copy that into Keynote or to save the file in a newer version of PowerPoint so that it can be opened in Keynote.

Cannot hear audio from external iSight

My machine is a 2007 Mac Pro octo, 16GB RAM, OS 10.5.2. Software Update reports the system as up-to-date.
I just got an external iSight webcam. It's recognized by System Profiler as model 0x8, revision 1.0.3. (For unknown reasons it's reported as having four sub-units and a 200MB/sec connection speed.) iSight Updater reports the unit as up-to-date.
Its video appears in iChat's (4.0.2) video preview window, and the video's quality is acceptable. The audio meter at the bottom of the preview displays a signal that varies in response to the sound level in the iSight's environment.
The iSight appears in System Prefs/Sound as a FireWire input. The display there varies with the environment's sound level, and is responsive to changes in the Input Volume setting on the same screen.
The iSight shows up in Audio MIDI Setup as a fixed one-channel, 16-bit, 48kHz audio source.
The above tells me the iSight is producing an audio signal. Nothing I've been able to do, however, has permitted me actually to hear this audio signal. Whether I select the Mac Pro's built-in output, its built-in line output, or an external FireWire audio interface, I cannot hear the iSight's audio. Using these same configurations, however, I can hear audio from QuickTime Player or any other audio app I've tried, as well as all system alerts. The problem seems to lie in the signal's routing.
I've followed this forum's maintenance and troubleshooting guidelines, including isolating the iSight on the FireWire bus and repairing permissions from a second 10.5.2 start-up drive.
I've spent several hours searching for clues about what might be happening, but have exhausted the suggestions I could find.
Does anyone have any further thoughts on how I might go about capturing this camera's audio signal?
I'd appreciate any assistance that gets me there.
Thanks.

Hello Hominahomina
You sound like an experienced Mac user, and you have tried most of the things that can cause this problem. You probably have already checked to be certain that your iChat > Video > Microphone Enabled has a check (tick) mark.
If so, the next suspect I can suggest for your consideration is a possible hardware or software conflict with your "external FireWire audio interface". Disconnect it and test iSight audio again. If it still does not work, uninstall any software that was installed with your audio interface and try again.
If that does not help, you can use any of the suggestions from How to test your iSight to ensure it is functional that you have not already tried.
If, when you play back the file, you can hear the sound recorded with your iSight using iMovie (4 or later), QuickTime Pro, or some other app that can record audio, your iSight itself cannot be the problem. You may have a corrupted iChat preference file. Try this:
• quit iChat if it is running
• delete your Home(User)/Library/Preferences/com.apple.ichat.plist file.
A new .plist file will be created the next time you launch iChat, but deleting the .plist file deletes several iChat preference settings, so those you want to be different from the default values will need to be reset.
If all else fails, your external iSight likely needs help form an Apple Service Technician. The external iSight you bought is likely not covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions. If your external iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
BTW, your posted system info shows Mac OS X (10.4.10), but you say that you repaired permissions from "a second 10.5.2 start-up drive." Hopefully, your posted info merely needs to be updated. Although we must start from a different disk to repair a disk, I am sure you know that we repair permissions on a startup disk using its disk utility when started from that drive. For benefit of less experienced readers, don't repair permissions for a disk with one Mac OS version (like 10.4.x) when started up from a different Mac OS like 10.5.x because doing so can cause serious permissions problems.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Cannot hear audio input live on vista laptop

I have just bought a Toshiba Qosimio and have been trying to record tracks from external mixer. I can record okay but cannot hear the imput signal while it is recording. I used to have xp and it there was no problem.
I have checked the device manager and the input card is the same as the output card and the input signal shows on the monitor record level on the bottom of the screen but I cannot get the laptop to play untill it becomes a wav. I am using headphones for recording and the speaker output is disabled when this happens as usual.
Has anyone got a possible solution to this problem?
Please feel free to ask any clarifing questions?
Regards Sean.

cheers Steve;
I've only worked with Dulls in the past
even the old p2 inspiron w win2k we used to have
would mute the audio out as soon as the line in was detected
the internal speaker would mute and I couldn't monitor unless I plugged in a headset
(that ancient thing only had an 8-bit card too)
and the most recent machine is a Dull Latitude D620 XP machine and everything is muted
yeah Vi$ta is an audio nightmare right from the getgo
but in their quest for DRM dominance they wiped the old HAL audio stack and replaced it the current junk
I think best bet is to find out if the internal card with (*retail version drivers) would support it
check the sound device mfg. web site for drivers and the Q&A if they have it.
if not then it's really a choice of USB audio interface or PCMCIA card (if there's a slot)
*(by retail version drivers I mean drivers that haven't been buggered by the PC company)
I've noticed this a lot with the Dull drivers versus the mfg drivers
ie. Sound Blaster drivers from Dull have less features and functionality than if I were to DL the Drivers from the Creative site
Message was edited by: Richard FDisk
what happened to the word "with"
supposed to say ...replaced it with the current junk"
"with" disappeared and I know I typed it.
anyway yes do check for hidden / disabled devices as Steve mentioned

Cannot hear audio for subclips playback in source monitor

Hi,
My editor has merged a bunch of video and multichannel audio on his computer and created merged clips and sub clips for me to look at. Now it's my turn to make selects from the merged subclips, but when I open the project on my computer the subclips don't play back with sound (however, the regular full merged clips play just fine). There clearly is audio attached to the subclips (i can see the waveforms) and the correct audio channels are turned on, but the no sound is played. However, when I drag these subclips into the timeline, the audio channels are all turned off -- I can turn the relevant channels on and then the audio plays in program monitor from the timeline!
Since my editor didn't have this problem on his computer, I assume it has something to do with the settings on my premiere pro.
Does anyone have any ideas?
thanks

I'm not sure if it would account for the exact problem you're encountering, but there is a known issue with subclips saved from merged clips. It involves the Media Start and End timecodes being improperly calculated. Even if this bug does not account for the particular issue you're reporting, I recommend not using subclips from merged clips for the time being. Two workarounds:
Rather than saving subclips from your merged clips, insert each segment into a sequence for review.
If you really want separated clips in the Project panel, make duplicates of the original merged clip and then set in/out points in each
If the bug records are correct, this issue was introduced in CC7.2, so another option is to roll back to 7.1. In that light, I'm curious whether you and your editor are on the same version.

Cannot hear audio while meters ARE showing signal

Hi,
Every once in a while (like NOW) i get to a point where FCE does not seem to be sending the audio signal to me MacBookPro's output. The sound settings of the Mac are set right. All other audio software gives a signal thru to the speakers.
In FCE I can see the audio meters moving up and down as the track is playing so there IS an audio file being read during playback.
I have no idea how I get into this kind of situation and, more important, i have NO idea how to get the sound to go through to the Mac's output again.
Can someone advise me please?
THX,
Brick

Go to View>Video Out and ensure that Canvas Playback is ticked.
If you have been capturing the firewire connection in/out overrides the Canvas Playback setting.
Al

Cannot hear audio on imported clips

Hello All,
I have used iMovie HD to import DV (sony DVCAM format tape) using the camera (Sony PD-170) and a DV tape player/recorder. In both cases the audio is inaudible in iMovie. I have tried raising the audio level in the clip as well as extracting the audio and raising the level. No dice. I am able to get audio using Microsoft MovieMaker (sorry!). But, I prefer iMovie for editing.
When I play the tape on a tv monitor the audio is fine. the level is low, but turning up the volume on TV is fine, at least to hear the tape.
Any ideas on how to get the audio up in iMovie?
eholz1

Your audio settings may have been changed.
1. Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
2. Change the Audio Output setting to 44100.0 Hz.
3. Quit Audio MIDI Setup.
More info on why this happens, here:
http://docs.info.apple.com/article.html?artnum=300832

Cannot hear audio of others in one specific group call

Hey all, a weird error's cropped up for me in a single group call. All other audio on my PC works fine (youtube, system sounds, even other skype calls like echo test and other friends), but in this call, everyone else can hear me, but I can't hear anything they say. Stuff I've tried already:Checking mic/speaker settings (they are correct)Reinstalling skypeRestarting PCSearching for fixes in older postsLeaving/being readded to the callGetting someone else to host the call I'm running the latest version of skype, and this error only appeared today, previously the call has worked fine. Any ideas?

Update: Tried changing the call host again, this time it worked.

Cannot hear audio when capturing video.

I'm an owner of a skate shop. I doing filming frequently, and just recently got my first Mac computer. I got FCE4 for capturing and editing my footage for a video that I'm working on. Just started using it today, have no idea how to get the audio to play WHILE I'm capturing the tape. It will play in the timeline after it's done capturing, but I'd like to be able to hear it (without plugging in headphones or speakers to the camera) while I'm capturing it. A friend told me it could possibly be an easy fix... any suggestions? Is it something as easy as checking or unchecking a box????

A friend told me it could possibly be an easy fix... any suggestions? Is it >something as easy as checking or unchecking a box????
No easy fix as Tom relates.
Does your camera have a small built in speaker?
That will work if the volume is turned up.
Al

I cannot hear audio with adobe presenter

I am in school and using balckboard to view lectures on line and I have no audio when playing presentations

You need the WMP plugin to listen to that station. Your plugins list shows the old WMP plugin (Npdsplay dll), so you can try to install the new WMP plugin to see if that works.
See http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

Cannot hear audio on playback

Similar Messages

Maybe you are looking for