Cannot hear Line In source

I have my iPod plugged into the Line In socket of my iMac, but cannot hear anything. The Audio Properties look very rudimentary, so I don't think I've overlooked anything.
Am I right in thinking I should be able to listen to whatever is plugged into the Line In source?
Thanks in advance.

CNG Tech; yes, I've looked there, but no joy.
DaddyPaycheck: yes it does and I thought plugging that into the Line In would be OK, but no joy. I can see the input flashing on the VU meter, but no sound at output. This happens with both the Tone Port itself and also when plugged into Line In.
I'm loathed to get external speakers as the whole point of an iMac is that everything is integrated together, no?

Similar Messages

Cannot hear line

I'm using Windows Vista and have installed my USB SOund Blaster Li've! External. All works fine except the recording.
I have a cassette deck linked in via the Line In. I cannot hear it but checking the Recording Tab on Sound in the COntrol Panel shows the fading moving with the music. How can I get to hear this?
Any help would be really appreciated!

"What U Hear" doesn't seem to be an option under recording for me. Line-in is not muted.
Also when I try to select EAX or Speakers to set my preferences, I get an error:
"The audio device supported by this application is not detected. The application will exit."
I can now see that the device is recognizing the music coming from my stereo, but I still cannot hear it in my headphones (I've tried three different sets of headphones). I can, however, hear all of my computer sounds and can also listen to music using my Windows Media Player ().
It's frustrating because I've owned this type of Soundblaster (SB0490) before and never had a problem.

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

This is a wireless carrier issue. The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
Contact your wireless carrier about your call quality issue.

HT4515 Just tried to place a call on my new iPhone5S. I can hear the person I'm calling, they cannot hear me. The microphone icon has a line through it, but tapping the icon does not make a difference.

Just tried to place a call with my new iPhone. I can hear the person I'm calling but they cannot hear me. There is a line across the microphone icon, which I took to mean muted but nothing changes when I tap it. What am I doing - or not doing?

is your mute switch turned on (above the volume) ? remove case and screen protecter.
is volume turned up?
if so do this
account security
Please call apple @ 1-800-692-7753 in USA
ask for the account security team
you may want to add a credit card to your iTunes account before calling; so they will have a way to verify your identity.
Peace, Clyde
check # for your country
http://support.apple.com/kb/HE57
<Edited by Host>

TS4185 I am having microphone trouble on face time. Others cannot hear me. I have checked system preferences and everything looks ok. Mic symbol has a line through it but nothing happens when I try to click on it. Internal mic is selected.

I am having microphone trouble on my Mac Book Pro during face time. Others cannot hear me. Microphone symbol has a line through it but will not allow me to change from muted to unmuted. "Mute" under Video tab is greyed out and internal microphone is selected. System Preferences show that internal microphone is working. I have tried to restart computer, no difference. Does anyone have a suggestion?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Sound Blaster Mp3+ cannot hear recorded so

When I play sound into the RCA line in on the back of the MP3+ the computer registers and records it correctly but I cannot hear it as it is playing which means I cannot simply listen to records on the computer using the line in. I have also noticed that there is no 'what u hear' option in the recording source selecter as has been the case with other creative cards. How can I make the the recording source audible?

Bahamut_uk,
Unfortunately the MP3+ is not capable of playing back it's inputs. This is due to USB bandwidth limitation as it would require the sound to be sent to the computer and then sent back to the MP3+ for output. This would introduce timing and latency problems. It would also require a huge amount of the usb bandwidth which would limit the computer sound quality capable. For a similar reason there is not an option for "What-U-Hear".
Jeremy

Cannot hear audio from external iSight

My machine is a 2007 Mac Pro octo, 16GB RAM, OS 10.5.2. Software Update reports the system as up-to-date.
I just got an external iSight webcam. It's recognized by System Profiler as model 0x8, revision 1.0.3. (For unknown reasons it's reported as having four sub-units and a 200MB/sec connection speed.) iSight Updater reports the unit as up-to-date.
Its video appears in iChat's (4.0.2) video preview window, and the video's quality is acceptable. The audio meter at the bottom of the preview displays a signal that varies in response to the sound level in the iSight's environment.
The iSight appears in System Prefs/Sound as a FireWire input. The display there varies with the environment's sound level, and is responsive to changes in the Input Volume setting on the same screen.
The iSight shows up in Audio MIDI Setup as a fixed one-channel, 16-bit, 48kHz audio source.
The above tells me the iSight is producing an audio signal. Nothing I've been able to do, however, has permitted me actually to hear this audio signal. Whether I select the Mac Pro's built-in output, its built-in line output, or an external FireWire audio interface, I cannot hear the iSight's audio. Using these same configurations, however, I can hear audio from QuickTime Player or any other audio app I've tried, as well as all system alerts. The problem seems to lie in the signal's routing.
I've followed this forum's maintenance and troubleshooting guidelines, including isolating the iSight on the FireWire bus and repairing permissions from a second 10.5.2 start-up drive.
I've spent several hours searching for clues about what might be happening, but have exhausted the suggestions I could find.
Does anyone have any further thoughts on how I might go about capturing this camera's audio signal?
I'd appreciate any assistance that gets me there.
Thanks.

Hello Hominahomina
You sound like an experienced Mac user, and you have tried most of the things that can cause this problem. You probably have already checked to be certain that your iChat > Video > Microphone Enabled has a check (tick) mark.
If so, the next suspect I can suggest for your consideration is a possible hardware or software conflict with your "external FireWire audio interface". Disconnect it and test iSight audio again. If it still does not work, uninstall any software that was installed with your audio interface and try again.
If that does not help, you can use any of the suggestions from How to test your iSight to ensure it is functional that you have not already tried.
If, when you play back the file, you can hear the sound recorded with your iSight using iMovie (4 or later), QuickTime Pro, or some other app that can record audio, your iSight itself cannot be the problem. You may have a corrupted iChat preference file. Try this:
• quit iChat if it is running
• delete your Home(User)/Library/Preferences/com.apple.ichat.plist file.
A new .plist file will be created the next time you launch iChat, but deleting the .plist file deletes several iChat preference settings, so those you want to be different from the default values will need to be reset.
If all else fails, your external iSight likely needs help form an Apple Service Technician. The external iSight you bought is likely not covered by Apple Warranty. If the seller is not providing you service guarantees or warranty, you may be want to check Apple's iSight Service: Frequently Asked Questions. If your external iSight needs parts that you or your Service Technician cannot locate, http://www.synaptech.com may be able to help you obtain those that are still available.
BTW, your posted system info shows Mac OS X (10.4.10), but you say that you repaired permissions from "a second 10.5.2 start-up drive." Hopefully, your posted info merely needs to be updated. Although we must start from a different disk to repair a disk, I am sure you know that we repair permissions on a startup disk using its disk utility when started from that drive. For benefit of less experienced readers, don't repair permissions for a disk with one Mac OS version (like 10.4.x) when started up from a different Mac OS like 10.5.x because doing so can cause serious permissions problems.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

Getting an Object Identifier String given a line of source code? HELP!

(forgot to close the code tag on that last one!)
Hi there,
I am in desparate need of getting the object identifier given a particular line of source code. I need this for the debugger I'm writing, and since the jdb forum never gets reponses; just more unanswered questions.
Right so, here's my problem in more detail. I can find out when a method is called in the Java virtual machine, and what its name is, and arguments and values and such like - using the Java Debugging Interface. BUT: unfortunately I cannot get the object identifier used in the source code that generated this call. I can however get a unique long id that identifies this object .. if that helps?(thinking hashtables here maybe?!)
So, I may know that the constructor of EddClass has been called, and this the following line generated this call:
EddClass edd = new EddClass();.. so what I need is a fail safe way of finding out "edd" from this - given all types of method calls.
This is quite tricky because there are loads of ways methods can be called e.g.
tty.getClassExclusions(); // Here I would know getClassExclusions had been called, and I would need to find out the object identifier "tty" called it
Temp a, b, c;
a = b = c = new Temp(); // Here I would know the constructor for Temp had been called, but now I would just want to know "c"
AnotherEg ae = (new Egg()).getAnotherEg(); // and in this last case if I had found out that the Egg constructor had been called, I don't want to find out any object identifier from this line of code - since the object is anonymous; however if I had found out that getAnotherEg() had been called I would want "ae"Ok, well - please help: I'm making a Java Animator that will be freely available - that serves to graphically animate the execution of another java program. It'd be cool if one of you guys could help make it really cool. Plus there are Dukes available!!
- Edd.

this is quite a complicated question I think!
I'm not sure but you maybe need to know just about the whole java lang. spec to do this.
I'm sure there are plenty of free java parsers around, so unless you have a lot of time available its probably best to download one, figure some way to feed it a single line from within a code block, and extract its symbol table.
Once you have the symbol table, there will probably be some other data available from the parser to say which are identifiers.
Its then up to your debugger to figure out which one is the interesting one!
sorry this is so vague but I think you've asked for something that is quite involved!
asjf

IN SERIOUS NEED OF HELP! Cannot hear my sound in iMovie!

Hi everyone,
I have been trying to crack this problem for weeks now and I must figure it out tonight because soon my project will be due.
I made a film in iMovie, I think version 4, and imported it into iMovie HD with no problems, and it updated it to work with the new version, and everything seemed to go smoothly EXCEPT, I cannot hear any of my sound--even though it is all right there. There's a soundtrack, and then there's the audio clips from the clips, many of them extracted, all of them locked into place, exactly where they should be, and yet when I play the movie I hear none of this sound.
I repeat, all of the sound is in place. I just can't hear it. You can see the waveforms or whatever of each sound clip or song. The boxes are checked to the right of the audio lines. The volume is turned up.
I thought maybe there was a problem with them anyway, for some reason, so I trashed the first song and them imported a new one from iTunes and it imported just fine, showed up on the timeline, and there's still no sound!
PLEASE HELP!!!!

I am having the same problem! I had sound this morning, now (after a power outage) I have no sound in iMovie...I have sound in all other applications, but not iMovie. I have re-started several times and dumped the imovie pref files from the library, but still have no sound. Very strange. Please help! I also have movies due soon!
Thanks

People cannot hear me in calls

3 times today I have either received or made calls and the person on the other end cannot hear me.
anyone else? not entirely happy with that :/ reboot has fixed it for now

I do not know what to do. Do not know what to try. I have had my phone for about 3 months. I can hear the other person on the line, but they say it is a lot of echos and static. If you get a fix for your phone, will you help me with mine, my phone is a Nokia Lumina 900. Feeling sorry I LEFT
I left my blackberry....

Schdule line data source

hi all,
what is purpose of schedule line data source.
pls explain to me.

Hi,
Hi schdule line data source extracts the data at the schedule line level.
basically the data in the orders deliveries or purchase are didvide in the following flow.
order->item->schedule line.
So a particular order can contain several item and in turn an item can contain different schedule lines.
A material is checked for the abailabilty when requested through a purchase order or delivered through a delievry order.
So if for example 100 qty is order and only 10 is available then 10 is delivered with that delievry date and 90 is left and then in the next turm 90 is delievred if 90 is available next time.
So now your item will have these two entries as schedule line.
This two entries cannot be brought at the item extractors as it is more granular then item
therefore it is brough thorugh another extarctor which gives in how many parts a particlaur item has been delievered.
Hope it clears
Thanks

Microsoft Access Text Driver missing! and ...Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

In order to use OpenRowSet, I installded Microsoft Access Database Engine 2010. However, I could not find Microsoft Access Text Driver in Drivers of ODBC Data Source Administrator. Could I get some help with that?
Thank you very much!

I am local admin and try to run the following script, but I got an error. Could anyone help me look at it?
EXEC sp_configure 'show advanced options', 1
go
RECONFIGURE
GO
EXEC sp_configure 'ad hoc distributed queries', 1
go
RECONFIGURE
GO
SELECT * FROM OPENROWSET('MSDASQL',
'Driver={Microsoft Access Text Driver (*.txt, *.csv)};
DefaultDir=D:\;','SELECT * FROM Test.csv')
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
Configuration option 'Ad Hoc Distributed Queries' changed from 1 to 1. Run the RECONFIGURE statement to install.
OLE DB provider "MSDASQL" for linked server "(null)" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "(null)".

Major Problem iphone 4. I can hear them, they cannot hear me.

This has been happening for the last 3 days. I make or receive a call on my iPhone 4 and within seconds the party on the other line cannot hear me at all. I hear them perfectly but they cannot hear me. Sometimes it happens right away sometimes it takes several seconds but my voice completely drops out. This happens 50 to 80% of the time.
Went to the apple store and they checked it by using the recorder app which worked fine and then by making a call which also worked fine. They did not perform any diagnostics. I'm on the road all day and my business depends on my phone. I am now afraid to make calls for fear of the person on the other side losing me mid sentence or not hearing me at all. Sometimes it works, sometimes it does not. This happens whether I'm on speaker, mic or bluetooth.
I upgraded to the latest software on Sunday and to no avail. Am I alone? 32gb iPhone 4 4.0.2 software. Any ideas?
Could this be iPhone problem or ATT?

Hi
This has also been an issue with my iphone 4, 4.0.1 also.
It worked well for a week but then the person I am talking to can no longer hear me or my voice sounds muffled. This seems to be an intermittent problem but very frustrating. If using speaker phone it works well, for now.
I went into the Orange store and the guy said he has heard of the problem but it's very rare. He told me that Apple can do a diagnostic to see if it is a problem they can fix.
Will let you know if this works.

Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracl

I have created a linked server in a SQL Server 2005 connecting to either an Oracle Database and a SQL Server 6.5 database and getting the following error for both links when trying to query using provider OraOLEDB.Oracle, please help.
OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3" returned message "ORA-12154: TNS:could not resolve the connect identifier specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "OraOLEDB.Oracle" for linked server "finprod3".

What version of Oracle client software are you using? 32 bit or 64 bit? Is the OS 32 bit or 64 bit?
12154 generally means the client can't figure out what TNSNames.ora entry you're referring to, which is the part you passed as "data source" in the oledb connection. Did you configure the client? Does SQLPlus connect without issue?
There's also a known issue where running 32 bit client software on a 64 bit OS can result in that error in some versions, due to parenthesis in the path of the executable - 32 bit apps go in Program Files (x86) on a 64 bit OS. Applying the latest patch level to the client software will resolve that issue.
Greg

Cannot hear audio input live on vista laptop

I have just bought a Toshiba Qosimio and have been trying to record tracks from external mixer. I can record okay but cannot hear the imput signal while it is recording. I used to have xp and it there was no problem.
I have checked the device manager and the input card is the same as the output card and the input signal shows on the monitor record level on the bottom of the screen but I cannot get the laptop to play untill it becomes a wav. I am using headphones for recording and the speaker output is disabled when this happens as usual.
Has anyone got a possible solution to this problem?
Please feel free to ask any clarifing questions?
Regards Sean.

cheers Steve;
I've only worked with Dulls in the past
even the old p2 inspiron w win2k we used to have
would mute the audio out as soon as the line in was detected
the internal speaker would mute and I couldn't monitor unless I plugged in a headset
(that ancient thing only had an 8-bit card too)
and the most recent machine is a Dull Latitude D620 XP machine and everything is muted
yeah Vi$ta is an audio nightmare right from the getgo
but in their quest for DRM dominance they wiped the old HAL audio stack and replaced it the current junk
I think best bet is to find out if the internal card with (*retail version drivers) would support it
check the sound device mfg. web site for drivers and the Q&A if they have it.
if not then it's really a choice of USB audio interface or PCMCIA card (if there's a slot)
*(by retail version drivers I mean drivers that haven't been buggered by the PC company)
I've noticed this a lot with the Dull drivers versus the mfg drivers
ie. Sound Blaster drivers from Dull have less features and functionality than if I were to DL the Drivers from the Creative site
Message was edited by: Richard FDisk
what happened to the word "with"
supposed to say ...replaced it with the current junk"
"with" disappeared and I know I typed it.
anyway yes do check for hidden / disabled devices as Steve mentioned

Cannot hear Line In source

Similar Messages

Maybe you are looking for