Cannot hear sound through headphones when running mainstage- Mackie 1220i interface

I am currently running Logic Studio with my MacBook Pro with a Mackie 1220i mixer/interface. I can hear the processed sound fine on the mic channel and the guitar channel when the headphones are plugged into the mixer but I get no sound when the headphones are plugged into the MacBook Pro. I am trying to set up a concert in Mainstage. Suggestions?

If you want to hear through the headphones of macbook pro you should change,
in preferences of manstage,
Go to audio
Audio output from Mackie,
set Built-In Output

Similar Messages

  • I cannot hear sound through my iMac Headphone port,

    I cannot hear sound through my iMac Headphone port, this is a very new computer. I can hear sound through the usb port of the device. How can this be fixed? Headphones are selected as an Output device.
    Please help in any way possible, it is becoming quite a concern as it was just working a matter of hours ago.

    usb does not carry audio at all it's a serial digital bus
    things one connect to usb which play audio act the role of being usb audio cards only 1 audio card can be active at the time so if you connect an usb audio card the internal audio card is muted
    this cause your headset to be muted
    disconnect the usb audio card and you will be able to use your headset
    if you wish to use a headset an an usb audio card at the same time the headset needs to be connected to the usb audio card

  • Why do I still hear sound through speakers when I'm using ear buds?

    Why do I still hear sound through speakers when I'm using ear buds?

    likely same issue just the detector is stuck in the opposite setting
    https://discussions.apple.com/thread/1343532

  • Can only hear sound through headphones

    i can only hear sounds on my ipod touch through my headphones

    first try plugging and unplugging your headphones at least a dozen times really fast because somtimes the headphone jack sometimes has debris in it. i used to have the same problem.
    if that doesnt work restore it back to factory defaults by going to the setting icon then go to the general bar, after that scroll al the way to the bottom and click reset, then click reset all settings after that if it still wont work do the same thing accept click on erase all content and settings 

  • Cant hear sound through headphones

    Someone please help. I still can not hear any sound through my headphones or record.

    Try a hard reset and go from there.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Ipod touch cannot hear music through headphones

    ipod touch 8gb cannot hear via headphones. All else seems to be working fine. Have tried several pairs of headphones with same problem....how can i fix this?

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • No sound from internal speakers however i get sound through headphones when plugged in

    i am not getting sound out of the laptop internal speakers when nothing is plugged into the headphone jacks.  if i plug headphones or external speakers the sound is verified to be on because i get sound / volume.  Any thoughts /  ideas?  Thanks

    Sorry, I do not have a solution to offer. But I have exactly the same issue. HP Pavilion TX2000, now just out of Costco warranty period (naturally). Sound from built-in and external speakers worked for about 2 years and a handful of months. A couple weeks ago, when I unplugged the external speakers, the built-in speakers would work only sporadically. Eventually, the built-in speakers ceased to work at all. Now, external speakers have ceased to work, too. I can get something resembling sound from Logitech USB speakers, but if these are configured for stereo the sound crackles and pops beyond belief. Setting to mono works. For now.
    I can only believe this is a hardware failure. Time-to-failure for this product is unacceptable, but what does HP care? It made it past the warranty, right?

  • Only hear sounds through headphones solution

    I had a problem recently where I could only use my headphones. Being the geek in nature I am I thought long and hard, and figured that it had to something to do with the iPod since that's what I was using last. I think the iPhone gets confused when you pause using the headphone buttun, and locks it in this mode. After fumbling around, reinstalling everything, it occured to me to just put the headphones back on, play the ipod, and stop it using the phone pad, not the headset button --problem solved. A friend just had s=this same problem, and I recommended this solution and it worked for him too. I hope you read this before you go through all the anxiety I did.

    Its safe to assume that this phone was working prior to the update?  I would do a restore through iTunes but this is my personal opinion.  The update didn't effect everyone this way or Apple would have a big problem so it's pretty safe to guess something went wrong with yours.  As far as Facetime goes,  I don't believe they were going to allow it over 3g.  The iPhone 5 supports LTE which is faster than most wifi so its allowed on there but 3g is much much slower.
    Cheers

  • For 1/11/11 expert day: can hear sounds on headphones but no sound via the internal speakers

    HP Pavilion dv6135nr Notebook internal speakers have stopped working.  I can hear sounds on headphones but no sound via the internal speakers.  A search on HP customer care for my notebook yielded the download recommendation below, even though I had not stated my problem.  However, executing this download did NOT resolve the problem.  Please advise regarding resolution to inoperable speakers.  I do not know if all of my sound and audio settings are correct, but the mute is not on and the volume controls are properly set.  The default device is Conexant High Definition Audio output, per the sound and audio devices properties hardware  tab the device status states "this device is working properly."  Is it possible that a Skype or Foxfire update is in conflict with this device?  If so, how do I resolve this situation?
    Thank you.
    Description: This package contains the driver for the Conexant High Definition Audio Chip.
    PURPOSE: Routine Details and specifications File name:
    sp34204.exe [1/1, 1.38M]
    System requirements: HP SoftPaq Number SP32646, "Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio," (or later) must be installed on the notebook before installing this SoftPaq. Look for HP SoftPaq Number SP32646 (or later) in the Software and Driver Downloads section of the www.hp.com website. Released: 2006-12-01 Version: 3.26.0.0 A Compatibility: Microsoft Windows XP Professional, Microsoft Windows XP Home Edition, Microsoft Windows XP Media Center, Microsoft Windows XP Fix/Enhancement: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.

     Re: Fixes issue where the notebook speakers do not work after headphones or earphones are used for a while and then unplugged.
    HOW DO YOU FIX THIS?? I cannot find the correct Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio that works with my computer...
    My computer:
    VISTA
    HP Compaq 2230s Notebook PC
    Everytime I use my headphones for more than an hour or two, the **bleep** audio will not play on my notebook's speakers, just through the headphones. Usually restarting a few times resolves the problem, but not this time. If I knew that HP computers sucked this much I would never have spent so much money on this one!!!
    Can you please tell me how to fix this problem once and for all? Thanks!!

  • I cannot hear voice through my headset under bootcamp win7.

    I cannot hear voice through my headset under bootcamp win7.
    would anyone provide update for Mac Air Boot Camp4.0 with Win7 32 bit ?
    thanks

    There are quite a few posts about the same sound issues so the best thing to do is to do a search here for something like "no sound in headphones in Windows" or something similar and try the one that fits your problem.
    Basically you have to enable them in the sound Control Panel, re-install just the Boot Camp sound drivers manually or possibly down load the sound drivers for your hardware (your sound card) from the manufacturer directly.

  • Can't get sound through headphones

    I cannot get sound through earbuds

    Couple of things to check here. 
    1.  Toggle volume buttons on headset
    2.  Check sound settings
    2.  Try a different headset to rule out the phone
    3.  If a second headset does not work check the headphone jack for debris
    4.  If no debris, and the phone is still under warranty, contact Apple Support or go by an Apple Store for service

  • I just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?

    i just downloaded face time and I can hear the othe person just fine but they cannot hear me. But when I play music they can hear music. what is the problem and gow do i fix it?

    Test your microphone in the Sound preference pane.

  • Sound Through Headphones Stops

    I have a Pavilion Dv7-6b01TX and recently I have been experiencing an issue where after a while, the laptop refuses to play sound through headphones, even when there's a pair of headphones plugged in. I've seen other problems like this, and the solution is to reinstall the sound drivers, but I have already done this 3 times. The only solution is to restart the laptop, but that is purely temporary and only lasts a couple of hours, at most.
    Any help would be appreciated, Thanks.

    I assume the guitar has electronics? If so, you must have some sort of ground loop. However, recording an acoustic using the electronics will not give the best acoustic sound, if that is what you are after. A mic on an acoustic will give a much more pleasing acoustic sound.

  • I cannot get sound through my laptop speakers ever since I used a digital speaker

    I cannot get sound through my laptop speakers ever since I used an external digital speaker.  Cannot seem to switch back to lap top speakers in my SYSTEM PREFERENCES...only showing DIGITAL out put option

    Hi there Lutostan,
    It sounds like you have disconnected the digital audio speakers from your MacBook Pro but all you have available in your audio settings. Take a look at this info from the following article named:
    Troubleshooting issues with no audio from built-in speakers on Macs
    If the Internal Speakers option does not appear in the Output tab and your computer is not a Mac Pro, check that Digital Out is present as in the image below:
    Confirm again that all external audio devices and cables have been removed.
    Check to see if a red light is lit in the line-out port. If so, your Apple computer may need service.
    If you do not see a red light, proceed to step 5.
    If the issues persist, contact Apple support for further troubleshooting assistance.
    Learn more
    You can obtain service (if needed) through an Apple-Authorized Service Provider or Apple Retail Store. If you plan to visit an Apple Retail store please make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • I cannot get sound through cable box after connecting apple tv

    I cannot get sound through cable box after connecting apple tv, any suggestions?

    Perhaps you disturbed or loosened the HDMI or other cable  from the cable box to the TV?

Maybe you are looking for

  • Update Routine with Return table

    Hello All: I'm trying to populate the cube by splitting 1 record into many records. I have following ABAP code in the routine which is failing at the LOOP keyword $$ begin of routine - insert your code only below this line        - fill the internal

  • How to use airplay speakers in multi-output device without crackling audio?

    Hi, I would like to mirror the audio output from my mac mini to the built-in output and an airplay speaker. Therefore I added a Multi-Output Device containing  the Built-in- and Airplay output, as soon as I activate the airplay speaker the sound is m

  • Looping HTML articles in Folio Builder Indesign CS6

    I've build a HTML folio using jQuery animations. Everything works great in Folio Builder (I can import the article and preview it on my devices etc.) But when I add a loop to my animations Folio Builder never completes the uploading process when I tr

  • How can I stop my phone from muting in the middle of calls?

    When pressing "send" and making a call, Six boxes pop up on the screen, one of them being the muting option.   My problem is that face or ear touch this button while I'm in the middle of a call.  I need to be able to manipulate the options that come

  • Install firewall or anti-virus program for new ipad

    Do i need to install a firewall or anti-virus program for new ipad