Cannot hear through phone unless on speaker

can anyone help? i have not dropped it or anything. took out battery and sim card, software is upgraded. still no dice
Message Edited by nina228 on 10-30-2008 07:30 PM

OK, I repeat:
"When did you upgrade the phone, and what exact model and OS is it?"
Need the info to research the problem, ok?
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

  • HT1430 cannot hear through phone except with speaker on- how do I fix this?

    cannot hear through phone except with speaker on- how do I fix this?  I am handling all calls now through speaker

    Go to settings/general/ accessibility/incoming calls and make sure it is set to default

  • Cannot hear through earpiece unless it's on speaker

    I couldn't hear through earpiece unless it's on speaker. This problem occured 3 days ago.
    People couldn't hear me during a phonecall, and I could't hear them either.
    I already checked everything at my settings, everything is set at where suppose to be.
    I also tried to restart my phone, but still nothing changed.
    I got my iPhone 4s just 2 months ago (basically it's a new phone), any one has any advice to fix this issue?

    Hey Itsanaasaunders,
    Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    http://support.apple.com/en-us/HT203800
    Clear the receiver
    The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
    Follow these steps, testing after each:
    - Make sure nothing is blocking the receiver, such as a case or film.
    If you have a new iPhone, remove the plastic film on the front and back of the device.
    - Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
    - While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
    Restart and update
    1. Restart your iPhone and test again.
    2. If there's still no sound or poor sound quality, update to the latest version of iOS.
    Get more help
    If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
    Thanks,
    Matt M.

  • HT1430 I cannot hear a phone call through the receiver, only thru the speaker or headset.  Any suggestions?

    I cannot hear a phone call through the receiver, only thru the speaker.  Any suggestions?

    I have te same issue. It started after upgrading to iOS 5 on my iPhone 4. I tried to restore, same problem after restore.

  • HT3310 I have an iphone 5. Speaker works but I cannot hear through the apple earbuds. Tried multiple earbuds and none work. But they work in other iphone 5.

    I have an iphone 5. Speaker works but I cannot hear through the apple earbuds. Tried multiple earbuds and none work. But they work in our other iphone 5.  Has anyone been able to resolve this without pursuing a replacement ?  If so what was the fix?

    You're not using a supported carrier. What did you think Apple was going to tell you?
    As fizzDripper suggests, contact the SIM card provider. How to make an unsupported SIM work on your phone is not Apple's problem.

  • Called party cannot hear when iPhone 4 in speaker mode.  cleaned earbud socket but think have sw problem. How do I reload os.

    Called party cannot hear when iphone 4 in speaker mode.  Have cleaned earbud contact but think this is sw problem and would like to reload os 5.1.1.  Not sure how to do this as all attempts result in "software is up to date" message.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • I cannot hear telephone calls unless speaker is on

    I just replaced the glass on my iphone as it had smashed but as soon as I got the phone back I was not able to hear telephone calls (incoming or outgoing) unless I put the speaker on....and the volume is still pretty low even though the volume settings are high.  May be a coincidence but Ive never had that problem before.

    I am having the exact same problem starting today. I took your advice about inserting the headphone jack and the thing about the speakers, no luck. I reset all the settings, turned it off/on, still doesn't work. If I plug the accessory jack into it, I can hear through my car's speakers, but I can't hear anything from the phone unless it's turned on speakerphone. Frustrating!
    Any other advice from anyone?

  • Unable to hear voices when on the phone, unless on speaker

    just had my iphone yesterday and when making or receiving calls, unable to hear any voices unless put it on speaker.
    it this a norm of the phone? had tried on all avenues on the phone to rectify, but unable to find any solution.
    anyone have any knowledge or ways to make it sound again?
    thanks.

    Try the suggestions mentioned in this article: http://support.apple.com/kb/TS1630
    More general troubleshooting for hardware here: http://support.apple.com/kb/TS2802

  • Device, driver loaded properly. Can hear through device 'phone input. Cannot hear through Logic Pro.

    I successfully loaded the driver to my brand-new Steinberg UR22 interface. The device shows up in Preferences > Audio as the input and output. I can hear a signal through headphones plugged into the headphone jack on the Steinberg.
    I cannot hear anything in Logic Pro, however. I've created a track, but cannot get my guitar to generate any movement on the LED fader on the lower left, or change rigs using the guitar amps/effects library on the right.
    What am I doing wrong?
    Why isn't there anything in the user's manual related to this?

    You've created an Audio Track, correct?
    Have you set the audio track to the correct input?
    The UR22's second (#2) input should be used with the Hi-Z switch enabled.
    Input gain at 1/2  also make sure the Master Output is up.
    You have a monitoring knob labeled Input/DAW
    If you wish to monitor both set the know to the halfway point, balance from that point.
    By Master Output I was referring to the Output level on the UR22
    Message was edited by: Pancenter

  • HT1430 I cannot hear any music thru my speaker!?only if I plug my headphones

    Since yesterday i cannot hear any sound when i play music on my iphone.it works only if i plug my headphones.the speaker is working when i talk on the phone,it rings .but the music not?what can i do?

    Have you tried different headphones?
    Have you tried a restore?
    See: How to restore the iPod to factory settings.

  • People cannot hear me properly, problem with speaker?

    I think there is a problem with my phone when I talk to people, they say I sound like I am far away I have to shout, or cup my hand to the bottom of the phone in order for someone to hear me.
    I have done, i have restarted my phone, removed the battery, checked the settings. Still people cannot hear me. It has only been seven months, I never had a problem with my old BB Bold.

    First, make sure your mic isn't full of pocket lint. It's right below the "k" in BlackBerry on the front of the device.
    Then go to the Help app. At the bottom go to Testing. You can do different diagnostic tests in there and one of them is the mic. Does the test pass for the mic?
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Cannot hear music or sound thru speaker

    Not hearing music/sound in the speaker with the Adobe tutorial pack, hotel tycoon, angry birds and some others.
    Is the an on-off in general controls I am not seeing?

    Aha!  So by "hardware error" do you think they are saying it's the way the iPad is built, as opposed to a fix-able software or firmware issue?
    Here is the weird thing.  Last night (after I had pretty much gotten over it), I popped on the tutorial and the speaker worked!  Same with Angry Birds Rio, but not Angry Birds HD.  Oh, well.  By that late at night I had to go back to ear buds anyway, so as not to wake anybody up.
    Might have been the reset I performed yesterday.  I was not really in full diagnostic mode when trying to fix the issue, so I kind of muddied the results.  Sounds like it is something Apple is aware of at any rate, if phone support knows about it.
    Thanks for pursuing this, Pitbull the 13th.  Did not mean to demote or promote your roman numeral designation.

  • TS1630 can't hear through receiver but can hear clearly on speaker phone

    just bought the iphone 5 two weeks ago and all of a sudden i cannot hear through the receiver or hear the ring, but I can hear perfectly on speaker.  I took it to Apple and it seemed they fixed it but now it has done again.  Very frustrating because when i need to make calls i have to put it on speaker phone.  Any suggetions is greatly appreciated.  I have an appt. with apple again on saturday but i think i need a replacement. 

    backup and restore phone.
    sounds like hardware issue.
    if issue still happens after restore contact apple and replace.

  • Cannot Hear Ring Unless Headset In Ear?

    iPhone 4S & Jawbone Era
    Cannot hear the phone ring unless headset in my ear. Missing important calls and texts. I can't keep headset on all day, and I can't pair it quickly enough when calls come in. This is silly I will have to only use headset for outgoing calls if isn't resolved or find other brand. :-(

    this is a user forum so we can't really do anything
    apart from that somebody may know a good work around but if you want to
    get in touch with apple to let them know your opinion
    http://www.apple.com/feedback/iphone.html

  • I cannot hear people on my iphone 3gs when im calling people

    when i make calls to people i cannot hear them on my upper speaker. i usally have to put it on speaker phone or connect my headphones. does anyone know what ribbon cable connects the speaker? any other suggestions anyone may have? i deffinitley made sure its not in headphone mode. i would be very grateful for an anwser

    Hi stijn cos,
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Judy

Maybe you are looking for

  • How to populate Reference Tab of CG02 in ABAP?

    Hi, I need to know how to populate the RefSpec field under Reference Tab in CG02 from an ABAP program. I was able to populate the Identifiers tab and the physical/chemical properties using the FM C1E5_SUB_EXPERT_DATA_CHANGE. Can i populate the Refere

  • Huey Pro not working after Windows 7 Ultimate install on W510

    I just received my W510 and installed Windows 7 Ultimate x64 as well as all of the relevant W510 drivers. I've also installed Huey Pro. I've read many similar posts regarding the Huey Pro issue and followed all of them. Unfortunately Huey Pro isn't a

  • UOM and invoice payment

    Dear All We have Placed P.O. nu. XXXXXX DT 01.08.2008, The U.O.M in P.O. is NOS, but the vendor has supplied the material in U.O.M. KG, now Stores has received the Material and prepared the GRN on NOS basis and also the material received has been Dis

  • How to create general message in sap screen for all users

    Hi Forum I am using ECC6 version and i want to keep a message for all the users for assistance (like who is the administrator,contact number,mail id, etc) Can anyone show me how to do this and also i want to know what is sm02 is used for? Regards Fri

  • Can you slowdown the speed of a video in Imovie?

    Have .mov files of 8mm film.  They run too fast.  Can Imovie slow them down?