Cannot highlight parts of text to revise leading, font, etc.

Having created a block of text, I cannot see highlighting when I select part of the text to modify. I can usually modify the text as I would normally- if I can make the proper selection.
In the same way, I cannot see nodes in a drawing, although I can modify them if I can select them. I have tried both in wireframe but still cannot see my selections. CC 2014.

Laffer,
View>Show Edges.
That is toggled by Ctrl/Cmd+H, the most probable near miss of all.

Similar Messages

  • How do I turn on enhanced text like size, color font etc.

    I just want to be able to add color, size , bold etc to my emails. This is the third time I have asked this question in this session. Give me an answer.

    I do not notice any other questions from you.
    Your question relates to emails, and so it may be better to ask the email site you are using. Any features regarding formatting emails, whether webmail or otherwise are likely to be specific to the email site, or email client that you are using.

  • SharePoint 2003 : Cannot open the Rich Text Editor in Content Editor Web Part

    Error message when you use the Rich Text Editor in a SharePoint Portal Server 2003 Service Pack 3 Content Editor Web Part: "Cannot open the Rich Text Editor"
    Mohamed Gamal Orief Senior Software Engineer ITWORX EGYPT Phone: +202.2673.6377 Mobile:+2010.0552.7971 www.itworx.com

    Hi Mohamed,
    Please check if your issue is the same as the following article cannot use Rich Text Editor in a CEWP on a Vista client, if yes, you can install the kb 941204 hotfix for your SharePoint 2003, then check result again.
    http://support.microsoft.com/kb/949604
    http://support.microsoft.com/kb/941204 (Description of the SharePoint Portal
    Server 2003 post-Service Pack 3 hotfix package: February 26, 2008)
    Thanks,
    Daniel Yang
    Forum Support
    If you have feedback for TechNet Subscriber Support, contact [email protected] 
    Daniel Yang
    TechNet Community Support

  • Adobe Reader cannot highlight text

    Sounds like user cannot highlight contents when viewing PDF fils in Adobe Reader

    That is correct for scanned pages and pdf files without reader usage rights.

  • Howtomake part of text as bold or differnt color text edit-webdynpro abap

    Hi
    How to make part of text as bold or differnt color in text edit-webdynpro abap.
    If we can make it bold then it is ok....or else atleast we have make it into some other color of part of text.
    Note:
    I tried with class char utilities and able to solve the issues like new line and carriage return....but could
    not make this bold or different color.
    Also when I use formatedtextview, I can able to solve this bold issue but I cannot solve this newline or carriage return issue...?
    Can any one help on this ?
    Thanks in advance
    regards,
    Pons

    You have to use the FormattedText UI elements for such a thing.  That is their purpose. 
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/3b/219141c1d0ae5fe10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/2772f505605447e10000000a422035/frameset.htm
    Supported Tags:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/08/5696420cc2c56ae10000000a155106/frameset.htm
    What kind of problem did you have with the Formatted Text?  Line breaks?  Did you try using the br tag?

  • Moving selected parts of text

    This is probably a dumb question, but how do I move select parts of text? I have a "B" and a "G" that I put into Illustrator using the text tool. When I go to move the "G" onto the lower corner of the "B", it selects both letters and moves them as a block.

    C,
    To elaborate (further) on what Emil said, you may use Character>Baseline Shift with a nrgative value on the G selected separately and then apply a negative Character>Tracking, or go back and forth between the two operations.
    Here is such a BG as live (editable) Type with a colour change of the G (the fairest font in 72pt, baseline shift -30pt, tracking -100).
    As mentioned earlier, there is a lot of things that cannot be done with live Type.

  • Cannot create Printer Context, text = Overlapped I/O operation is in progre

    Dear Experts,
    We were trying for a new scnario from the functional part that is if they make invoice immediately print shout trigger,our SD consultant has made all the configurations perfectly,there are two output types for one document(invoice)the moment they save the document an Lpad os opened and it shows it processed two document.for this i have configured new output device.with acess method F.please find below my Lpad messages
    (16:38:44) Number of processors: 2
    (16:38:44) Icon DLL loaded.
    (16:38:44)
    (16:38:44) Network Communication via SAP-NiLib
    (16:38:44) Hostname: POLIT500
    (16:38:44) IP Address: 4044736.2089885357.32.1289416
    (16:38:44)
    (16:38:44) SAPLPD Version 6.29 for Windows/NT (OPT) is listening
    (16:38:44) OS-Info: version = 5.1, build = 0/2600, text = Service Pack 3
    (16:38:44) Copyright 1992-2001 SAP AG
    (16:38:44)
    (16:38:53)
    (16:38:53) Receive job for printer
    172.15.1.3 (Berkeley LPD protocol / RFC1179)
    (16:38:53) send_status called
    (16:38:53) send_status called
    (16:38:53) send_status called
    (16:38:53) send_status called
    (16:38:54) send_status called
    (16:38:54) Job 000eXL0r.BDD for user DEVBD queued.
    (16:38:54) Start printing job 000eXL0r.BDD on printer
    172.15.1.3
    (16:38:59) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
    (16:38:59) Error: The printer
    172.15.1.3 is unknown to Windows Print Manager.
    (16:38:59) The following printers are currently defined:
    (16:38:59) Printer = MICROSOFT XPS DOCUMENT WRITER
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Printer = HP LASERJET 1022N
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
    (16:38:59)
    (16:38:59) Receive job for printer
    172.15.1.3 (Berkeley LPD protocol / RFC1179)
    (16:38:59) send_status called
    (16:38:59) send_status called
    (16:38:59) send_status called
    (16:38:59) send_status called
    (16:38:59) send_status called
    (16:38:59) Job 000eXTXN.BDD for user DEVBD queued.
    (16:38:59) Start printing job 000eXTXN.BDD on printer
    172.15.1.3
    (16:38:59) Error: Cannot create Printer Context, text = Overlapped I/O operation is in progress.
    (16:38:59) Error: The printer
    172.15.1.3 is unknown to Windows Print Manager.
    (16:38:59) The following printers are currently defined:
    (16:38:59) Printer = MICROSOFT XPS DOCUMENT WRITER
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Printer = MICROSOFT OFFICE DOCUMENT IMAGE WRITER
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Printer = HP LASERJET 1022N
    (16:38:59) Warning: Printer name contains spaces.
    (16:38:59) Please rename printer, before using it from R/3 or UNIX!
    (16:38:59) Error: BG: saplpd_open_dc failed, msg = 808 SAPLPD:Windows Problem, siehe SAPLPD Protokoll
    Please give me the solution
    Regards
    shakthi

    Hey did you solve this issue?
    If yes then please post your solution here..
    Even I am facing the same problem..
    Regards

  • Premiere Elements 11 Titles - Can text kearning and leading be adjusted?

    Just migrated to Premiere Elements 11 (from PE 10) and love the new interface and snappy performance.  However, when making simple titles (using Text menu, New Text option) I can't find a way to adjust text leading (space between lines) and kearning (space between letters).  In PE 10 these were available as explicit "buttons".  I'm sure that the developers didn't drop this feature.  Does anyone know how to find it?
    Thanks

    junior166
    This is an older thread going back to May 2013 so I am not sure how soon Susan Verner will see your question on what she said was her workaround for this text matter.
    But, when she says "...(this is also a workaround for text animation on multi-line titles....", then she must be talking about what I described in my blog post under the header of
    "Applying Text Animation to 2 or more lines of text per Title (in this example 3 lines)"
    With this technique and the example that I wrote about, there were 3 lines of text all within the same Title file, not 3 lines of text each with its own Title file.
    http://www.atr935.blogspot.com/2013/07/pe-titler-part-1-text-animations.html
    Please let me know if you have any question on the blog post content.
    Thank you.
    ATR

  • My iphone screen has totally frozen and i cannot even turn it on or off  the screen is fixed including the time and i cannot receive calls or texts.

    Hi. My iphone screen has totally frozen I went to slide across to use my phone and the arrow is stuck to the right and the screen is fixed. The time is frozen I have tried turning the power off but i can't even do this. I cannot receive calls or texts. Please help!!!

    Follow http://support.apple.com/kb/TS3281

  • I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    I cannot get my messages/text messages to work om my Hi.  I am sending this thru my iPad.  Respond and let me know you got it.  Fun fun fun.  .  I did go and try to another Apple ID different from my iPhone but it still will not work.  Can anyone help me?

    chicx wrote:
    This is the third time of writing this on your Apple Support Communities!
    Not with your current user id.
    Far too much uneccesary information in your post, which only confuses things, a vast amount!
    Let's start with iTunes.
    Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
    With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
    Once you have doen those two things, check to see if the iPod is seen by iTunes.
    chicx wrote:
    By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
    Really?
    OS stands for Operating System. (In computer speak, IO means Input/Output.)
    iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
    I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

  • I don't have tool bar of adobe acrobat.  Safari toolbar displays.  How can I get acrobat toolbar, need to highlight parts of my document

    The acrobat window is part of my safari window.....doesn't show toolbar for acrobat.  Don't know what I'm doing wrong.   I've uploaded my docs and want to highlight parts of them.  Appreciate any help.
    Have anything to do with fact I'm on a mac.
    Thanks
    Michael

    The acrobat window is part of my safari window.....doesn't show toolbar for acrobat.  Don't know what I'm doing wrong.   I've uploaded my docs and want to highlight parts of them.  Appreciate any help.
    Have anything to do with fact I'm on a mac.
    Thanks
    Michael

  • How can I control printing highlighted part of a page?

    I have a problem with a new computer on which I can not print highlighted part of a page. When I try the highlighted part is not printed. If I use my old computer the highlighted part is printed as expected. I have compared the settings for both the printer and Firefox on both computers, but do not see any difference. Both runs Win7, runs on the same network and use the same printer. Only difference I can think of is that the new is a 64 bit computer. Any ideas of how I can solve my problem?

    Hi 16tons,
    The issue you are referring to might be a known bug. You should look at CWW's post in this thread:
    https://support.mozilla.org/en-US/questions/923294
    A fix is planned for the next Firefox update.
    Hopefully this helps!

  • Photoshop cs6 won't allow me to highlight my existing text layers. Does anyone have experience with this problem?

    Photoshop cs6 won't allow me to highlight my existing text layers. I select the text tool and the text layer I want to edit, hover over text and each time I attempto to edit a new layer is created. Does anyone have experience with this problem?

    Be sure you go to Adobe's Web Site and make sure there are no Updates for CS6
    http://www.adobe.com
    Remember if you have trouble with a software issue it is the software and not caused by the Mac you are using
    Many users simply don't remember when you upgrade software you normally have to go to 3rd party web sites and update software as well.
    Cheers
    Don

  • HT1338 When I try to link my Macbook to my TV, I cannot find the "Arrangement" button that would lead me to "Mirror Display". Please help!

    When I try to link my Macbook to my TV, I cannot find the "Arrangement" button that would lead me to "Mirror Display". Please help!

    The Arrangement tab only appears in System Preferences Displays pane if a second display is recognized by the system (the OS).  So it seems like your MacBook is not seeing the TV as being connected.
    Describe the video connection between MacBook and TV...  What type of video out port does your MacBook model have?  How is it converted to the type of port used on the TV?

  • New Acrobat X / LiveCycle User - Cannot Freely add/move Text Fields - Why?

    I have (what seems to me) an elementary question that I cannot seem to figure out.
    I have a form that I created in MS Word with placeholders for fields such as pick-lists, text fields, or check boxes.  Now that, to me, is not uuber fancy, but I cannot seem to add text fields freely in Acrobat X without the constraints of the rulers or grid lines limiting WHERE I can place my text box, etc.  How can I change this?  I created a form a few weeks ago and didn't recall having this limitation, but now I am whiule creating a different form.  Any idea how to work around this?
    P.S.  I even tried creating the doc instead through LiveCycle, by uploading via the Word doc and editing from there, but I cannot seem to get LiveCycle to work at all.  Everytime I select the Word doc to upload, the program stops responding and freezes.  I am using LiveCycle ver 9.0.0.0.0 and X Pro 10.1.0
    Thank you for any help one can offer (for a non-uuber techie type)
    Cheers,
    Amber

    thank you, that fixed it.  Whew, I knew it was something simple. 

Maybe you are looking for